EventHandler: fading out before doing anything else

Similar Questions

• Firefox crashes before doing anything.

  Firefox announces that it crashed before it does nothing and told me to stop or restart that results in the same crash. I have included my e-mail address with the report of accident several times but received no recognition. I am a veteran of Windows since 98 & can find my way around directories & registry. I have all crash reports, not acknowledged by the last id including the FF site.

  Win7 seems otherwise healthy and going Explorer'net ok.

  It seems that the uninstall of FF program is not severe enough or that I fell into a black hole of FF. I've uninstalled and reinstalled without success. My next thought is to remove all program FF, Applications and data files, and whatever the entries in registry, Regseeker & CCleaner think appropriate., & then reinstall.

  I've been running Win7 with the last pack of Srv, Norton Inet Scrty with FF for years, with no problems.
  I reported this with Inet Explr given that FF does not work. Are there procedures or suggestions to offer?

  Thank you for the report crash IDs. I checked the last three and that they do not match philipp mentioned originally, here is a little more information about this problem.

  If you open the error reports and click on the 'Modules' tab, you will see that the first on the list in each case is "FLVSrvLib.dll". This module installs with various programs of Applian Technologies including Freecorder and Replay Media Catcher.

  The accident seems to have started after that users with one of these programs installed a recent last update their Norton Security software.

  Could you check again on the question of if you have either of these programs, and it is not essential, try to uninstall it then restart Windows to ensure that none of its components are running.

  Firefox will start normally after that?

  If you do not uninstall the program, a few others said using the msconfig program to stop execution at startup FlvSrvc.exe circumvented the problem. See: http://windows.microsoft.com/en-us/windows/using-system-configuration

• DEP maintains close my "my pictures" file before doing anything

  Now, whenever I try to open anything in my photos, data execution prevention area opens and closes the file. I tried the suggestions on this site, but it does not help. I tried to save pictues to another file, but it still happens. I can't do anything with my photos. Help, please.

  http://ask-Leo.com/how_do_i_turn_off_data_execution_prevention_errors.html

  Please read above thread but first:

  Download, install, update and do a full scan with these free malware detection programs at:

  Malwarebytes (MMFA): http://malwarebytes.org/

  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  http://www.Microsoft.com/security/scanner/en-us/default.aspx Security Scanner   

  http://www.eset.com/us/online-scanner/ eset online scanner

  post your results with this additional info:

  brand and model of browser, OS, pc and ServicePack, current antivirus?

  When the problem started everything first?

  Have you tried the system restore to an earlier date of work?

• Installation disc Win7 keeps restarting (before doing anything useful)

  Recently, I bought a Windows 7 upgrade (a file called ')

  Dutch_Windows_7_Professional_SP1_W64_X17 - 59236.img'). Now I have burned the image on a dvd and am trying to install, but not having not success.

  When I start the computer with the disc, I get the usual "press any key to boot from the disc" message, what I'm doing. Then, a white with the text "loading files" progress bar appears. After the progress bar has filled, for a second or two, I see the text "Starting Windows" and then the computer restarts. And that's all, I can't go any further.

  I took several measures to ensure that it is not a bad burned disc or a hardware malfunction:

  -J' have burned and tried the two DVDs. Same thing with both.

  -J' tried my desktop computer (a fairly new PC with UEFI) and my computer laptop (very different material, old-school BIOS) and several virtual machines. All these machines are known to work properly (I'm typing this from one of them). All give the same results.

  -In addition, on the virtual machines I tried to start the downloaded directly (not from the dvd) image file. Yet once again, the same thing happens.

  So. Someone has an idea what is happening? What can I try? In my view, that the problem occurs at a stage early that there are little, I as a user can do, but I'm not a big user of Windows, then maybe someone has an idea.

  Thank you

  Bottom Timmer

  Looks like you have a corrupt. ISO file, try to download another copy and try again.

• Can I have a button to open a file without doing anything else?

  I created a button to open a pdf booklet. However, when this button is activated, is not only the pdf file opens, but the project continues to the next slide. Is it possible to stop this?  I want this button to open the brochure and nothing else.

  I am using Captivate 5.5 on a Windows 7, 64-bit system

  Thank you for your help,

  Shannon
  

  Hello

  When you set up the link that points to the PDF file, you open in a new window? If so, you should also see an option on the drop-down menu where you choose to point to a new window that says something like: continue a game project. You must make sure that the option is NOT enabled and playhead should remain on-site.

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks

• How can we change automatic spacing without changing anything else in a paragraph? (InDesign CS5.5)

  I'm very new to InDesign and I am trying to format a novel that was written in Word. I have many ongoing complex formatting (areas of text, fonts, alignments, etc.) and noticed after I imported the text of the word, most of the setting in the form (with the exception of most of my text boxes, which I can live with) has been preserved, but the leader has changed considerably (which I just can't live with).

  I figured out how to change the functionality of automatic line spacing in the paragraph styles box, but I don't want to change anything else in the paragraph - namely, all of the custom line spacing (like tabs, for example) disappear when I apply the style with modified automatic spacing. I don't need the leader has changed, nothing else.

  Best of cases, I'd love to be able to bulk change the entire novel to automatic spacing changed, if possible.

  I would appreciate help!

  Looks like there are overrides of style before you make the change in leadership. If you select the paragraph, do you see a sign more after the name of the style? If you do, and the formatting is rally to what you want, right-click on the name of style, then choose redefine. You should then be able to reset the amount of automatic spacing and other attributes will stick.

• Malwarebytes - do I need anything else (security tips)

  Hello ladies and gentlemen, Apple Support Forums!

  I have a few questions about this great little Mac Mini on my desk. Coming from a Windows background, I have a bit of inherent paranoia that needs a bit of smoothing.

  I have read about the security of the Mac, on the defences of sandbox, Gatekeeper, never install suspicious applications etc. But I guess it's always better to have a scanner installed as well. Mac simplifies the sort to choose as my old Windows, Emsisoft Anti-Malware and Superantispyware programs do not provide versions of Mac.

  Malwarebytes is one of my classmates that comes with the Mac version. And howdy to how fast it scans. O_o compared to Windows 7 minutes 30 seconds.

  Norton was even crap in Windows and Avast, I have more confidence. Avira for Mac looks nice and simple.

  So my questions are the following:

  (1) do I need anything else besides that Malwarebytes and Avira? (And common sense, I got load of Windows security vulnerabilities...)

  (2) as I understand it, Windows malicious software may enter the Mac, but they are completely powerless to do anything, just hang out? Under no circumstances can they interfere with my Mac? So as long as I scan with Malwarebytes, all bad guys he finds are for Mac and trash from potential Windows that the rest is harmless anyway?

  Thank you for any assistance you can provide!

  No reason for Aviri or another anti-virus application.

  Viruses, Trojans, Malware - and other aspects of Internet Security

  https://discussions.Apple.com/docs/doc-8573

  Effective defenses against software malware and other threats

  https://discussions.Apple.com/docs/doc-8841

  Malwarebytes is a good software to search for Adware.

  Yes, Windows malware only will infect a Mac. Only concernis than if yo al; so to run Windows on your Mac.

• TV out button does not work on my Satellite Pro M30

  Hello

  I installed Windows XP SP2 and all drivers for M30 but the "TV out" button does not work although I have also installed the tool "Controls Button from Toshiba" (continues to ask to be assigned to a program), it worked before installing the new.

  I also noticed that the "Fn + F5" also does not work too (eg. do not send the signal to the TV).

  Can anyone help?, thanks in advance.

  Hi Karim

  Write about you? :)

  In any case, try to install TOSHIBA common Modules again. Maybe it helps!

• Now my HP Officejet Pro more will not print Photos or anything else!

  Here I am once more.  I finally solved the problem that I had been downloading the software for my HP printer after that I downloaded Windows 10.  I could not download any software without getting an error message 'download cancelled '.  I was able to print pictures and letters typed with WordPerfect X 6.  I'm embarrassed to say that I accidentally fell into the solution and now I can scan, send faxes again.  Yay!  Problem is NOW, I'm more able to print photos, or anything else!  I go through all the motions and send the message to the printer to print, but nothing happens.  I have already run the hppiw.exe and configure the printer.  When I try to run the HPPSdr.exe, he unzips the file, the printer appears as "installed" and click on the 'Next', I get a screen with 3 different ways to connect the printer to my computer - I choose USB because it'S the way I was connected.  Then I get a message telling me to do that my printer is on (it is)!  and try a different USB port (I have) or try another USB cable (I HAVE!)  OK, so FINALLY I get to the point where I am able to print on a HP Officejet Pro 8600 N911g series Print Page of Diagnostic quality, AND DOES IT!    But I also know there is a problem with the software and I need to uninstall and click the Support link and the Driver to download new software.  But when I click on the link, I'm told I'm not connected to the internet - here we are again.  I'm exhausted.  I am 65 years old and I've been at this for 96 hours.  I've corrected the problems of scanning, but now I can't print while yesterday I was able to do it!   Arrrrggggghhhhhh.

  Can someone tell me why I get the message 'not connected' when in fact I AM connected to the internet?  sigh/smh

  Hi @Galego,

  Welcome to the HP Forums!

  I see that you can not print with your HP Officejet Pro 8600, on 10 of Windows, and I'm happy to help you!

  Please, try the steps in the following order:

  • Uninstall the software. Uninstalling the printer software.
  • Unplug the printer USB cable.
  • Clean boot the computer. How to perform a boot in Windows.
  • Disable all Antivirus programs. Disable Antivirus software.
  • Disable all firewall programs. The WF of end-to-end.
  • Create a new user account. Management of user accounts and connections (Windows 10).
  • Reinstall using the printer HP install wizard for Windows. (Wait for the software to tell you to plug in the USB printer cable).

  Then, run the HP print and Scan Doctor to verify that everything works.

  I hope these steps help!

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

• Reactivated my computer with muted and all I get is a song play more and more, can not hear anything else.

  Original title: music

  I used my sound muted.  I had something that I needed to listen to the sound but when i not cut the sound there is a song that plays again and again... you don't hear anything else.  How can I disable this...

  Hi Kathy,

  From the description you have provided, it appears that there is a program (most likely a music player or a browser that has a tab open playing multimedia content) that runs in the background in the computer at the time where you encountered this problem. Sometimes when you open Web sites in a browser, they automatically open certain pop-up windows that keeps the game ads. It could be like a local browser window as well.

  So that the community to better help you, you will need to provide some information on your computer. I put a few questions below, answer please:

  1. What is the operating system installed on the computer that has this problem? And what is the service pack installed on this operating system? You can check this information by referring to the this article .

  2. what internet browser do you use on your computer? If it is Internet Explorer that you are using, let us know its version by referring to the information here.

  At this point, I suggest two things you can do on the computer that has the problem of eliminating the factors I mentioned above. I describe below, check them out:

  Method 1: Use Windows Task Manager to identify current programs that may cause this problem:

  If you press the keys Ctrl, SHIFT and ESC keys together on the keyboard of your computer, it evokes the Windows Task Manager program. On the Applications tab in the Windows Task Manager, a list of the applications currently running on your computer is displayed. When you have found this reading repeated in the computer, you can open the Windows Task Manager and check what programs are running on the computer at this time.

  Check the list of Applications for probable programs which could play music - a music/video player, a Web browser, etc.. You can right-click on these programs that are running and click on switch to to get that particular program and check if it plays the song you hear. If you find the program that is causing the problem using this method, you can simply close this program. That should solve the problem.

  However, if the problem still persists in the computer, follow these steps:

  Method 2: Save your files/programs, and then restart the computer once:

  Save any unsaved file/program, you have opened in the computer and restart the computer once. Is the issue still there after the reboot? To let us know.

  These steps has the basic things that you need to register such a question. I hope that they help you get started in a good sense. Please report if the problem is still there, or you need help Windows. We are happy to be of assistance.

  Nice day!

• Uninstalling Microsoft Office has failed and cannot uninstall or install anything else.

  Original title: install problem HELP

  I tried to uninstall Microsoft Office and it failed several times. And since then I have not been able to uninstall or install anything else! A pop-up Windows Installer that says "preparing to install" appears occasionally. I tried about 100 things and nothing really worked! Can someone HELP me please?

  I tried before, but nothing helped. I just restore my computer to its factory settings, that fixed it.

• Put 8g memory in es1-512 but does not start. Had to put 4g in. Does anyone else have this problem?

  Put 8g memory in ES1-512 but does not start. Card say that it will accept up to 8 GB. He went out, re he sat several times without success. Does anyone else have this problem? Thanks in advance.

  Hello

  Here's the original memory stick for Aspire ES1-512:

  KN.8GB07.013

  SODIMM.8GB.DDR3L - 1600.KINGSTON

  OR

  Compatible memory: Kingston

• There is not bios, or anything else showing

  I have a dimension 4550 requiring an upgrade, but what I didn't have a battery in it was dead.  I disconnected to do the upgrade and now facing a black screen.  I have a new battery installed and dvd cd players work but the screen does nothing... What do I do now or should I take to Highway and lie down next to him?  There is not bios, or anything else showing

  I have a dimension 4550 requiring an upgrade, but what I didn't have a battery in it was dead.  I disconnected to do the upgrade and now facing a black screen.  I have a new battery installed and dvd cd players work but the screen does nothing... What do I do now or should I take to Highway and lie down next to him?  There is not bios, or anything else showing

  Once the parameters required by the computer's BIOS were kept in low-power CMOS memory.  The power was supplied by a battery when the power was provided by the computer's power supply.  Removing the battery with no available backup power would cause the memory of losing the settings.  Some - but not all - power supplies provided backup power to the CMOS when the computer was turned off but still connected to the external power supply.

  More recent computer use a nonvolatile memory such as EEPROM or flash the BIOS settings for memory, so that the only thing the battery support is the real time clock.

  In both cases, remove the BIOS battery without having available backup power will not result in a black screen.  If the BIOS settings are lost, the computer will generally display a message giving the possibility to access the BIOS configuration utility to reset the missing values.

  Most probably, when you had the case open to change the battery you dislodged or loose a connector for the video card.  Two more serious possibilities come to mind: you put the battery head down (I don't know what will happen in this case) or you skipped a few circuits with static electricity.

  Open the case and static precautions, look for loose or damaged connections.  Also check the polarity of the battery of the BIOS.

• 53 updates to Windows Vista and now screen keeps saying that it configures updates, then it restarts and the wont do anything else

  After using no not my laptop for some time, I turned on and 53 updates to Windows Vista. Went through the whole process, then got to the updates configuration screen and the laptop keeps restarting and it won't do anything else.

  Hello

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  ___________________________________________________________________

  or please repost your question in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• HP Officejet 6000 printest test page, but do not print anything else. How to print wireless?

  I reinstalled the printer.  It printed the page test perfectly, now I will not print anything else.  How to print again?

  Hello

  Welcome to the Windows 7 community!

  From your problem description, I understand that you can not print from HP Officejet 6000. I take this opportunity to help you.

  Let us perform the following troubleshooting methods and check that it helps to resolve the issue.

  Method 1: Run the printer Troubleshooter
  first of all, make sure that your printer is turned on and connected to your Windows computer according to the manufacturer's instructions. Then, try the printer troubleshooter, which will attempt to diagnose and solve your problem automatically.
  For more information, see the article below:
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Method 2: Restart the Print Spooler Service
  You must be logged on as administrator to perform these steps.
  a. open administrative tools by clicking the Start button, then Control Panel. In the search box, type administrative tools, and then click Administrative Tools.
  b. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  c. right-click on the print spooler service and then click Properties.
  d. on the general tab, next to startup type, make sure that automatic is selected.
  e. If the service is not already running, under Service status, click Start and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Method 3: Configure the driver to correct the printer port
  on the tab "Ports" of the "Printer properties" window, select the port for the printer driver.
  a. from the Windows desktop, open the printer properties window.
  b. click the Ports tab.
  c. under "printing on the following ports; Select the port to which your printer is connected.
  Example: In this example, the printer is connected to the "USB001 virtual printer Port.
  d. click on 'Apply' to validate the changes.

  Click on general tab and then click on 'Print Page of Test' to confirm that the changes fixed the problem.

  You can also check out the links for more information.

  Printer problems in Windows: http://windows.microsoft.com/en-US/windows/help/printer-problems-in-windows

  For any further assistance, I suggest you to contact HP printer Support.

  Here is the link: http://www8.hp.com/us/en/support-drivers.html

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

  Kind regards!