Receive the file (-1073741819) system error in Vista

Similar Questions

• My pc cannot install this update received the automatic update system (KB2564958).

  Hello

  My pc cannot install this update received the automatic update system (KB2564958). Each time you start my system, a necessary update is displayed in the taskbar, but after installation and reboot of the system, this update appears once again, which indicates that the update has not been installed.

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

• When I try to copy the files from Windows Mail on Vista on a USB key I get the message "you are about to copy this file without its properties

  I move the file from my old PC which took place with Vista on a new computer running with Win 10 where I have Windows Live Mail is installed.  When I try to copy the files from Windows Mail on Vista on a USB key I get the message "you are about to copy this file without its properties".  After studying this issue on the forums, a proposed solution was to reformat the drive in NTFS format, I did.  This does not solve the problem.  Any suggestions?  Would it be OK in this case to ignore the message and copy the file without its properties?

  Well data files/user of vista should work. Yes a NTFS format is good, go to run, or cmd, type:

  diskmgmt.msc in msc, R.click on the material, delete the partition, create one, format. Use the default settings,

  Once thru, L.click the disk, go to actions, all, select 'enable '.

  In addition, live windows for vista is microsoft discontinud

• Try installing Adobe Acrobat 8 on Windows 8. It says that I need the file AdobePDF.dll on Windows Vista CD-ROM. Where can I find this file?

  Try installing Adobe Acrobat 8 on Windows 8.  It says that I need the file AdobePDF.dll on Windows Vista CD-ROM. Where can I find this file?

  Acrobat 8 is compatible with Vista, Windows 7 or 8. She asked the AdobePDF.dll and if you can get it, the installer asks for another, then another, the... and it would not work properly. If you want a compatible version, go here...

  http://www.Adobe.com/CA/products/Acrobat.html

• I'm trying to reinstall CS2 on an XP that has never been installed. The download works fine, but will not accept my serial number to activate. I copy and paste from my account to ensure accuracy. Continue to receive the serial number incorrect error. What

  I'm trying to reinstall CS2 on an XP that has never been installed. The download works fine, but will not accept my serial number to activate. I copy and paste from my account to ensure accuracy. Continue to receive the serial number incorrect error. What would be my next step to get this race?

  CS2 (or earlier version) activation server has disappeared, then read below

  You MUST use the special number on the page, not your original serial number

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

• I'm trying to install Acrobat 8 Std on a laptop computer that was in need of a restoration.  He asks the file AdobePDF.dll since my Vista CD - I do not have.  How can I get this file or another which will allow my Acrobat 8 work on this laptop with Win 8

  I'm trying to install Acrobat 8 Std on a laptop computer that was in need of a restoration.  He asks the file AdobePDF.dll since my Vista CD - I do not have.  How can I get this file or another which will allow my Acrobat 8 work on this laptop with Win 8.1, which she did before restoring?

  John,

  AdobePDF.dll is in the file Data1.cab. Mine is located in C:\Program Files (x 86) \Adobe\Acrobat8\Adobe Acrobat 8 Professional\ You need to extract the file "AdobePDF.dll_64" from the .cab file. You can do this with WinZip or 7-Zip. Everything you need to extract is this file, nothing else... Once you have extracted it, remove the _64, so the name of the file is AdobePDF.dll. Then place the file in any location you want and run the program it when asked. For a file location, I suggest to C:\Program Files (x 86) \Adobe\Acrobat8\

  Hope that helps.

• Steps: we received the file in PDF format and has been invited to modify the form.

  Steps: we received the file in PDF format and has been invited to modify the form.

  
  

  My colleague edited in Livecycle es4.

  
  

  When we sent the document to them, they asked to have the title marked as H1, as it is currently labeled as content.

  
  

  In live cycle, unknowledgable about how we change it.

  
  

  We then took the file is saved as a word document in their exported to PDF via adobe DC

  
  

  my changes and referred.

  
  

  Once they have received the file they are unable to put anything (all data in the document where it will also prompt) using the player

  
  
  

  We are not writing this on the central computer, but that's what we have...

  
  
  

  Acrobat reader ix 11.0

  
  

  Adobe live cycle ss4 11.0

  
  
  

  Thank you...

  It is urgent need please reply as soon as possible

  Hi barbarac80529448,

  Please see this KB doc. helps LiveCycle | Working with the forms, it might help you in the installation of PDF form in Adobe LiveCycle.

  Kind regards

  Nicos

• The event COM system error +.

  XP Home SP3. All the updates installed ect.

  Having this issue almost once a day.

  Computer stops responding. Icons have no effect or return errors. Parts of some windows, such as Solution Explorer, lose their color.

  Only solution is off and restart.

  Every time I am met with the same results in Event Viewer. A long line of warnings of yellow triangle with these properties:

  EventID 4356

  {The COM event system + could not create an instance of the Subscriber partition:{41E90F3E-56C1-4633-81C3-6E8BAC8BDD70}!new:{D3938AB0-5B9D-11D1-8DD2-00AA004ABD5E}.  CoGetObject returned HRESULT 80070422.

  Event ID 4352
  The event of COM + a system attempted to raise the EventObjectChange::ChangedSubscription event but received a bad return code.  HRESULT was 80040201.

  I ran a number of pieces of different viruses, including Kaspersky, clamwin, Spybot, Malwarebytes, Malwarebytes ROOT kit. Zone alarm.

  I have updated all drivers with SlimDrivers.

  Could really do with some decent advice on this one.

  http://EventID.NET/display-EventID-4356-source-EventSystem-eventno-1035-phase-1.htm

  Read more top

• Trying to open the files Windows 3.1 with Vista Home Premium 32 bit

  I am trying to open the files of an old computer running Windows 3.1. the files include MS Publisher, MS Works, encyclopedia Compton, & several other w/3.1 compatible programs. Y at - it a program or an update to Vista that can be used to open these files? What I try to open it & save programs on a version of Windows 3.1 & Vista before using on Vista? I can't open files from MS Office that have been made on a computer running Windows 98 or 2000. Any ideas?

  Windows has many built-in features to make it as compatible as possible with older versions, but Windows 3.1 is really a little old! You can try to use Compatibility Mode, but it goes only up to what Windows 95.

  To run an older program in Ccompatability Mode (as if your PC was using an older operating system):

  1. right click on the program and select 'properties '.

  2. go in the 'Compatibility' tab at the top.

  3. check the first check box and to set up the 'Windows 95 operating system "(which is as old as that).

  4. check all other settings for maximum compatibility (depending on the program that you try to use, some may not be necessary, but you should try each of them to be sure).

  5. click "OK" and try to run the program.

  Note: If you want to try to do this at a program Office (and other Windows programs), this may not work. Please ask for more help with this.

  Your files, you need to just find a compatible program to open with. Please tell us the types of files for more help with this.

  Rifdhan

  If this is your answer, click on "Mark as answer" below. If it's useful, click on "Mark as useful" on the left.

• Put the files in the trash, empty the trash, and then doing some other stuff, and then when I couldn't find the files again, I reinstalled windows vista... now I need/want these files

  I sent files to the trash, and then I emptied the trash, and then realized that I only need/want these files, so I went to look for them, then screwed up everything while doing so somehow a shortcut on my desktop, then I put in the disc to reboot/reinstall the entire system windows vista... can we recover these items , or they are gone forever?

  I don't know what kind to reinstall you did.  If it was a repair/upgrade, you may be in better shape (fact he preserve your data and programs after the re - install - then you have made the right kind of re - install).

  If you did a reinstall to repair/upgrade and if you have Vista Business, Vista Ultimate or Vista Enterprise, you can be lucky.  They have so-called saves shadow copies, which are deleted or modified files that can be recovered in case changes/deletions made by mistake.  http://www.Microsoft.com/Windows/Windows-Vista/features/shadow-copy.aspx more information about how to use this feature to: http://blogs.techrepublic.com.com/howdoi/?p=145.

  If you have Vista Basic or Premium of Vista, shadow copies is not available; However, there is an alternative that is free and the shadow copies feature called Shadow Explorer. http://www.howtogeek.com/howto/windows-vista/recover-files-with-shadow-copies-on-any-version-of-windows-vista/.  Although it will not help you this time, it could very well save you in case this happens again.

  If this does not work, here are a few free recovery programs that might help (if you did a lot for the system, because the files have been deleted, then chances are that less as they might otherwise be - see notes below):

  http://www.SnapFiles.com/freeware/system/fwdatarecovery.html (first try Recuva)

  http://www.SnapFiles.com/get/DiskDigger.html

  http://www.SnapFiles.com/get/easusdfr.html

  http://www.SnapFiles.com/get/restoration.html

  http://www.SnapFiles.com/downloads/Recuva/dlrecuva.html

  http://www.SoftPerfect.com/products/FileRecovery/

  http://techpaul.WordPress.com/2008/06/23/how-to-recover-your-lost-files/

  The files are not really deleted until they are crushed (although they are no longer available through conventional methods).  If you decide to try these recovery programs, you should stop using your drive hard immediately in order not to replace the data that you are trying to recover.  He slave on another PC and launch the recovery of this PC.  Even now you have definitely lost some of them if you use the same PC.  If you can not do this (slave on another PC), you run the risk of overwriting the data with every action you do on the PC (but you may still be able to recover some or most or even all files - it's a matter of luck).  The fact that you did a re - install is not good for what is successful, - but it's worth a try.

  Only you can decide if the data is important enough to take the PC to an expert data recovery to recover files (they will have better programs and hardware to do that none of us do, and I've provided above).  Do NOT go to the Geek Squad or one of these centers of store-, they generally don't know what they are doing - it take for expert data recovery.  It will cost you a little and they generally offer no guarantees.  The decision is yours.

  Good luck and I hope this helps!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Delete the files for registration error in Event Viewer

  Original title: Jorge

  Hi, can I just permanently delete error recording files? they came out after that I looked at Event Viewer?  Thank you

  That's what I have records of error application form Viewer event, security audit records, system error reecords custom log error records

  Hello

  Thanks for posting in the Microsoft Community Forums.

  Microsoft Windows operating systems include an observer of events that records instances of computer about security changes, of hardware and software. Even if this maintenance assistance program handles the details constantly, you must erase it occasionally because once the capacity of the event log is full, the event viewer to stop recording. After that you have reviewed the incidents, you can save or delete. The steps below will teach you how to clear the observer of events quickly, make room for fresher newspapers of the day.

  (a) select ' Control Panel ' in the start menu.

  (b) then select "performance and Maintenance"

  (c) select "Administrative Tools"

  (d) open "Event Viewer."
  (e) highlight the journal the list Microsoft Management Console .

  (f) in the toolbar menu, select 'Action' and "clear all events" .

  (g) select 'Yes' to save the event log.

  Please post back with the result. If the problem is still not resolved, we will be happy to help you further.

• Check the file C: System! I swear I fix one thing and get another!

  When I start my computer, I get the "checking file system on C: the type of system is NTFS volume name is OS one of your disks needs to be checked for consistency? and he tells me he is highly recommended, but I can push a button and get out of the audit.
  I admit, I never let check because after 20 minutes he told me, it's 1 or 2 percent made and I work on this computer.
  I know that others have asked about this similar and I followed responses they received, but the biggest problem is that other problems or responses to the command prompt responses are different from mine, and usually they have windows xp, or whatever.
  so I don't know if this is related but I thought I'd mention it and take this new laptop in the trash if more questions come!
  system freezes in the middle of the video of the Conference and his stats he is unresponsive, I can\t download things like itunes store and windows update works ONLY if I check updates physically. I can't choose to have installed automatically and on voice calls on computer, audio playback is just skip words or making noise like a CD that is stuck!

  I don't expect anyone to try to answer all these questions, but I would like to know what I can do to correct the C: drive?
  It's an ASUS with windows 7 and intel core 3 and 13 weeks, but he's headed to the trash if I can't work on it.

  Thanks in advance

  As says tetraethyle3; You must run the utility disk check has detected a problem that needs to be identified/recitified until he became, in the worst cases, terminal.

  Theres no point in trying to fix other issues until you have solved it

• Receiving the planning server connection error when validating BusinessRule.

  Hello
  
  I get an error when validating business rules.
  
  Internal error in connection with account login information. Get the details for more information.
  
  When I click on detail get I see the information below.
  
  Details: error connecting to server xxxxxx planning.
  
  Details: Exception occurred. Please check your log file for more details.
  
  I have another question, I can't access Applications via the Web. Receiving the following error log check logon unsuccessful for more details.
  
  Hyperion Planning Version is 9.2.
  
  Help, please.
  
  Thank you.
  
  Published by: user8887080 on August 18, 2010 13:39

  I recommend you connect to My Oracle Support and have a read of the doc - id - 763345.1
  It goes through different options to solve the problems of trade rules.
  You need to be able to log into your planning first applications, make sure all your login information is correction for example the details to connect to relational databases.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Could not import the files to/System/Library

  I am trying to download files to the library of patch of Quartz, but the files copy to the folder. When I try to drag and drop the file appears with a grey symbol "cannot complete this action".

  Is this a permissions problem?

  El Capitan running on an end of 2012 13 MBP retina.

  Is this a permissions problem?

  Sort of. It's probably the integrity of system of Protection (SIP) preventing rogue of hacking of the system processes.

  If you really think you need to change the system, disable SIP, make the changes, and then re - activate the SIP.

• Write the File.vi spreadsheet error hidden 8

  I'm having a problem with writing in the File.vi worksheet. I want to use a spreadsheet file to save temporary data to be accessed at a later date when the program closes. I write in a spreadsheet file, while the program is running, open it and it read it once the program ends, and then write anything in the file to erase all data in the file. The question that I have is during the last entry; If the spreadsheet file is hidden (I would like to be hidden, so it is not deleted, removed, or modified between the execution of program) the vi returns an error.

  error 8 open/create/replace the file in spreadsheet write String.vi-> .vi write to the spreadsheet file (LDM)

  This error does not when writing the actual data in the file only when I write an empty array to erase the file, and it only occurs when the worksheet file is hidden.

  Attached is a good example of what is trying to be accomplished LV2012

  In theory, you can use 'Set Flie Size' to set the OEF to 0.  I have never tried on a hidden file.