Everything is grinding to a halt, no access to the cloud?

Similar Questions

• How to disable access to the cloud of document on an iOS device?

  Currently, we use AirWatch to manage our 70 + iOS devices and here to use player however we are not able to allow users to store documents in the cloud.  Is it possible to disable the access of cloud when installing the iOS application or by the use of an MDM?

  Hello

  Currently, Acrobat DC IOS does not have the option of disabling access to clouds for business users.  In fact, he's headed in the opposite direction to promote the use of Adobe Document Cloud.

  Adobe Document Cloud for businesses | Adobe Acrobat DC

  If you wish, you can submit a feature through the next page request.

  Adobe - feature request/Bug Report Form

  The product management team will take your request into consideration for a future release of Acrobat DC.

  Thank you for your inquiry.

• U3415W, access to the menu?

  I buy just a 34 "u3415w monitor dell happened yesterday to use it as an external monitor with a macbook pro 2010.  Well, it does not in any way/shape/content with the laptop.  The question is, with the MACBOOK, I'm sure, because the mac slows to a grinding halt when I connect the monitor and it does not display any video signal.  I tested different forums alternatives, one of them is to change the OSD settings on the screen, to change the DP 1.2 Protocol.  Which brings me to my current question here on the Dell forum:

  When I touch one of the four "buttons" on the front of the monitor, everyone gives me the quick menu "input selection".  I can't access the main or other settings menu on the screen.

  I tried with the monitor not connected to any computer, turned on and turned off, power source disconnected... yet all four keys only show the input selection menu.  This behavior is normal for the monitor?

  Because Apple is not tested by Dell hardware, I assume that you are connected like that?
  MacBook Pro Thunderbolt/CDM on--> U3415W mDP to DP--> DP U3415W cable in (next to the HDMI interface in)

  The U3415W user's Guide page 31. You would choose DP not the CDM and the Disable =

  

• Firefox is unable to access all the pages of an HTTPS site.

  We have a computer cannot access all the pages on a specific HTTPS site. I don't want to advertise the URL here. "" We can connect to the site and navagate to half pages, but the other half give ' (error code: sec_error_unknown_issuer). We have uninstalled FF and spilled the appdata. Renamed the cert db and he had to recreate. IE working on it from that computer to the website. All computers in the office can access the web site without any problems, some using ESR some with regular FF. This system uses the latest version of FF ESR, but we also tried the regular version. The only thing we haven't tried is disable the AV (Symantic). One thing I noticed, is that the URL of this web site are extremely long.

  Why the FF honors cert for some pages but not others. It also does us not add an exception.

  Thank you

   Mesept
  

  The first thing I checked was the cert chain, all certificates are valid. Time on computers is very good, the second thing I checked.

  As I said in a previous post, a few pages work, some do not which means that certificates are valid for certain pages, may not be a problem of cert, sometimes they work. Same site also works with IE and chrome on the same systems.

  Cannot ignore and accept the cert in he won't let me. Which is off and I don't know how to turn it on.

  In any case, I submitted a ticket for the owners of the website last week and now everything works.

  Thanks for the answers that I don't have a resolution, I guess that developers found a bug and fixed it.

• Time capsule of access on the Internet (PC MAC or Windows)

  Hi, I have a Time Capsule, and I want to create a folder and be able to access from anywhere on the Internet (regardless if it's on a MAC or PC based on Windows). I read several posts and google, but still I am unable to set up the time Capsule. Can any experienced user me explained step by step?

  Thank you

  SGL

  You need to tell us a few things.

  1 do you have TC as the only router in the network.

  If this is not the case, the configuration is entirely via the main modem router combo.

  Without a public IP address on the interface wan everything that is your router, you will not be able to access it remotely. For the most part, wireless, satellite or internet shared building will not allow always remote access.

  2. double NAT will never work, so if you already have another router modem the TC must be in the bridge.

  3 Apple offers NO WAY for PC/windows remote access to the TC. Neither iOS btw... the Apple of the only method allows is AFP via a Mac.

  Local people do via SMB to TC port mapping... It is poor and does not always work.

  The tool used for iOS, filebrowser shows how this is possible.

  http://www.Stratospherix.com/support/gsw_timecapsule.php?page=6Remote

  
  

  I do not recommend this somehow... It's open ports in a way that reduces your security seriously.

  I repeat... Apple has no PC access.

  4. There is a safe way to do it... buy a vpn router and use before the TC. VPN is recognized global method for secure remote access. Who will work for any device having vpn client available... OpenVPN is the easiest in terms of cost, configuration and security.

  5. There is another method entirely, and that is to store the files you need to join in the cloud... Cloud is a better resource than to use your own router as Pseudo-nuage.

  If you eliminate the need for PC access then use BTMM for access to the TC.

  CCMM is authorized only and only the Apple method which are likely to work.

  Have you even tried yet?

  See Tesserax doco on remote access.

  https://discussions.Apple.com/docs/doc-3413

• No remote access to the admin page local account mynetgear

  I used happily log into my RN10200 remote and access to everything, including the local administration page. Who has been using ReadyCloud, i.e. before the access of the Web page without hope we get using mynetgear. Page Web tells me that it is no longer accessible on the same network?

  It's pretty useless, because I want to manage my remote NAS box as well!

  

  I want my access admin back please!

  I would add that I always get very happy fully my ReadyNAS Duo ReadyNAS Remote, even the admin page via. This makes me wonder why I got a downgrade from my accessibility on a new product?

  The images worked and I saw them, they just had not been approved yet (just fixed).

  Have you tried to download the ReadyCLOUD application using a different web browser?

• I can't unlock the sim card because I don't have access to the entirety of the well-tempered clavier

  Hello

  I can't unlock the sim card because I don't have access to the entirety of the well-tempered clavier. Indeed, everything is enlarged.

  Hello from the bedienungshilfen zoom aktiviert den EIB. Dann das bild-display verschieben kannst.

• Access denied: the IP address of this computer host is not on the list of eligible access of the target.

  Hi all:

  I was working normally with my NI9024 CRIO to my work. I went home and when I came back the other day. I tried to compile my application to work.

  The surprise was that I got a strange message "access denied: the IP address of this computer host is not on the list of eligible access of the target."  Now, I can not connect a CRIO device. I tried to reset all the IP addresses in the CRIO and my PC computer. What can I do?.

  Yes. This is the solution. I had to uninstall the NOR-RIO software on the target. I have uninstall everything on the CRIO. Then I reinstall the software, but I had also to program the fpga, the host and target. And I also have my IP, on the measure and automatition software. I found a big bug I guess.

  Thanks anyway. National Instrument of love. Hope to work there one day.

• Allow "Flatten XML" and "Unflatten from XML" to work without access to the internet.

  Hi all

  In my program, I use the XML Unflatten and flatten XML screw. On my development computer, everything works fine. As soon as I put it in the production environment, it has stopped working. I reduced to doing in my production environment, there is no internet access and I'll be never able/allowed to have access to the internet there.

  Someone at - it an elegant way to solve this problem? (By "elegant" I do not want to manually change all of the .xml files that I produce to include the path to the local LVXMLSchema.xsd) Is there a file .manifest or .config can we change to point my program compiled to the xsd on the right file? Perhaps another method?

  Thank you!

  Kind regards

  Filip.

  Hi all

  I think I found the solution.

  In the end, it wasn't an Internet. It was the inclusion of the classes in the compiled code or not.

  Attention! It was not enough just uncheck everything in the "Additional Exclusions" section of the building. I actually had instantiate each class possible, which can be converted by the "XML Unflatten" in the .vi. I even tried to put the lvclasses in the always include the article of the source of the build. This no longer works.

  Thanks for all your suggestions guys!

  Kind regards

  Filip.

• Access to the Internet and get a "atl100.dll" error when you try to use Firefox

  I just reinstalled Vista Home Premium and everything was going well for two days, but I can not access the internet regardless of the browser that I use and when I open Firefox, I got an error of "atl100.dll", I am afraid that my files cd, especially the .dll files can be altered, where can I find a good (and costs nothing) copy of the file atl100.dll? Please help as soon as possible. Thank you!!

  Original title: Re-installed Vista Home Premium and cannot access the internet & get a "atl100.dll" error when trying to use Firefox and IE just is not access to the internet either

  Hello

  1 did you changes to the computer before the show?

  2. What is the full error message?

  3. who is the antivirus installed on the computer program?

  4 are you using wired or Wi - Fi to access the Internet?

  5. What is the version of Internet Explorer installed on the computer?

  The possible causes:

  • ATL100.dll file is missing, as it was accidentally deleted from your computer
  • ATL100.dll file is damaged by viruses and your computer cannot access the file.
  • ATL100.dll associated with registry files is corrupt and obsolete.

  Perform the steps:

  Method 1: Perform a SFC scan on your computer to fix the corrupt dll files.

  Reference:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2: Run a scan antivirus on your computer.

  www.Microsoft.com/Security/Scanner

  Note: If infections are detected during the scan, there is a risk of data loss because infected files will be deleted.

  Method 2: Reset of internet explore and check. (If you use Internet Explorer)

  How to reset Internet Explorer settings

  http://support.Microsoft.com/kb/923737

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  For more information, see the links:

  The problems of Internet connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  I hope this helps.

• EA4500, network drive doesn't work without access to the secure folder

  The map I try the USB hard drive connected to my EA4500 router as a network drive in Windows 7 and it works perfectly until I have enable access to files on the router.

  After enabling file access secure and do not change other settings of the router I first disassemble the drive because it has been implemented without credentials and does that any more.  When I try to remap the drive I use the same address, but select 'Connect using different credentials' when he invites me to the log in info I try to use the router administrator account, but it fails to connect.   Diagnostics Windows network tells me that the device has refused the connection.  I have to create an account on the router in the settings of folder with the same username and password that I use on my computer and tried to connect it without checking 'Connect using different credentials' (and them by manually typing if it matters) with the same results.

  Even with secure file access enabled, I can still reach the reader very well by typing 'ftp://192.168.1.1/' in the file Explorer.  It prompts me for a username and password, I put in the administrator credentials, and I'm in.  The account, I created with the same name of user and password that my computer works this way.

  After you turn off access to the secure folder as everything is working perfectly again...  I'd rather do it with him, however.

  Follow these instructions: http://homekb.cisco.com/Cisco2/ukp.aspx?pid=80&vw=1&articleid=25813

  When you click the Browse button, that the router shows up when access to secure files is disabled, but not after it is activated.  I've looked through my sharing settings windows and haven't noticed something that should cause problems, about that everything is allowed.  I also tried disabling my firewall without success.

  Well, that was weird...

  I have reset the router, was able to operate with secure file sharing is enabled, but only, I could get a device connected to the player.  I went in the USB storage on the router settings and started to get a bunch of error 2123 and 2118 s to the point that I was not yet able to change the settings.  On the USB, I noticed a file named "." ftp_share.nfo"what is strange because it seemed sure whether a file instead of a folder in previous tests.  I deleted the folder and all the errors disappeared, had haunted all my settings for the drive into the router, and now it works perfectly...

• problem with Internet connection sharing, error: connection ad - hoc has "no internet access" on the cell phone of the customer

  Original title: problem with Internet connection sharing

  my laptop running on Windows Vista Home Premium SP2 (this one has access to the internet by using the dial-up modem and will to act as a sharer of internet connection or as a host) and the client computer runs on Windows 7 Starter

  in a first step, I try internet connection sharing, I've set up an ad hoc network and I just changed my setting modem dial-up on the sharing tab, of course what I change, it of 'Allow an other network users to connect through this computer internet connection' and choose the on Home Networking connection wireless network connection , then my mobile client to connect to a special that I created and portable client connected to the internet via ICS
  then the problem came when I restart my laptop. When I tried to use ICS once again, my customer laptop really takes a long time to connect, he continues saying 'identification' side host and client. and after that "identify" is complete, it says ad - hoc connection, I create has "no network".
  so, I'm a person answer in this forum
  ' Obtain an IP address automatically is the wrong setting on the Ethernet connection. "  To return to the sharing tab and unshare the wireless connection.  Close all windows network, and then open them and re - share the wireless connection.  Who must configure IPv4 for the Ethernet connection properties for:

  IP address: 192.168.0.1
  Subnet mask: 255.255.255.0
  Default gateway: no
  "DNS server: none.

  I put this on my laptop of the host, and and I put the IP address on my laptop customer in 192.168.0.2 with the same default gateway as my portable computer host IP

  and made some progress in this case, when I try to connect host and the client is no longer to 'identify' phase, immediately connected laptop both but my mobile client can not connect to the internet and displays "No Internet access" on the ad hoc network, I have create

  I tried a lot of things but always completed my mobile client can not connect to the internet and displays the message "no Internet access.

  What makes me confuse is first, I try to share the internet connection everything works like a charm, I set up an ad hoc network, and then change the setting on my modem dial-up so he can share the internet connection, and voila, computer laptop client connected to the internet. I change even not all IP settings

  But why after I restart my PC, this problem comes...

  someone knows how to help me with this problem?

  Hey, Mimbs,

  You can try the similar thread to the next with a possible solution:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/no-Internet-access-in-the-client-machine-when/77312e09-4385-41FA-A420-0c42be58e4e3

  Also for reference:

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

• How to unlock the c: drive. I have only access to the folder users and subfolders.

  I have only access to the folder users and subfolders.  Everything I tried was "access denied."  I can't get to the root of c:.

  Hi, Scrivmark

  The default C: drive system is not intended to access directly by users and therefore users have restricted access to its root in the premeditated or premeditated damage prevention vital system files. If you are an administrator you can allow full access to your account to all or specific files on drive c (including a root folder) by editing its ' authorization of the lists by right-clicking on a file and choosing "Security."
  If you are not an administrator, you should ask another user whose account is Administrator (or equivalent) privileges to access the interesting files to your account.
  In both cases, you must understand damage system files, you can do.

  This suggestion is the intention that your computer is virus-free.

• cannot access shares the local computer

  Hi-

  Win7 64 bit.   I use homegroup, and I have this Win7PC on my local network with XP and Vista PC.  I can see the 2 other PCs on the Win7 PC and get to their shared folders.  None of them access to the part of it.  I have the name of workgroup defined correctly on all (including this PC Win7).

  In addition, oddly enough, on the WIn7 PC, in WIndows Explorer, I can navigate to C:\Users\Public BUT if I try to go into WIndows Explorer, then fall below computer - C: to the network and open it, I see the other 2 PC and the local PC.  The WIn7 PC is called "kirk".  So, in network - Kirk, IF I open it I see 'users' share.  BUT if I click on it, I get the error:

  \\kirk\users is not accessible.  You might not have permission to use this network resource.

  I am logged in as administrator (on Kirk).

  So, to rephrase, I am connected to a Win7 PC as an administrator.  I can navigate to C:\Users\Public in WIndows Explorer.

  BUT if I go to "Network Neighborhood" in WIndows Explorer (it's actually just "network") I see the local PC named Kirk.  If I click on it, I see 'User' (share).  I can't go to see 'public '.

  To make things more awkward, I could access it until a few days ago and I has not installed anything new, although WIn7 can be updated automatically.

  Help!

  Thank you

  Kelly

  Hi-

  Thanks for the list of things.  There was a lot of good links in there.  I went through everything without the blinkers "it worked before" and "I won't change anything" on each link there is, I've lived and all checked.  The only one I had to do something opened ports in my firewall mcafee.

  Nothing helps.

  This PC is named kirk and I still don't see files shared this PC itself in windows Explorer - network\kirk. for me, very odd, I am connected to kirk as an administrator.  I open Explorer windows on kirk.  I can see c:\users\public in windows Explorer, but I do not see network\\kirk\users

  so, I thought, let's start over.

  I went to the center of network share and changed "active network" of the type "work network" type "home network" and it is now.

  working group name has not changed so it's always "the Star", so I can see all the other no WIn7 PC and PC WIn7 himself can see that it is me in network neighborhood.

  I'll reboot and be sure to x 2.  very weird.

  Thanks for your help!

  Kelly

• attempts to secure access to the api.

  My dear, I tell them that I am developing my first application and having run my apps on a BlackBerry 8520 when I use background pictures.
  Working
  3.7.2 - Eclipse with the corresponding pluggin
  -BlackBerry JRE 7.1.0
  -OS on my device is 5.0.0.592

  Bookmark and share also, I installed keys to sign the application in these cases. In the Simulator, everything goes perfectly, but when I go to the triggers device error "seeks access to the api".
  The api I import into my application are for example:
  import net.rim.device.api.system.Bitmap;
  import net.rim.device.api.system.Display;

  The question is if there is a problem of incompatibility between the sdk jre, etc for which you should keep in mind when developing.
  Thank you in advance for any information you can give me on this subject.
  concerning

  Jorge

  You can have multiple JRE versions installed.
  You can install additional JRE using the eclipse update page.

  For your device, I suggest to use JRE 5.