Everything to the word?

Similar Questions

• Everything on my Hotmail and the words are too small to read. How can I make it bigger?

  Original title: HOTMAIL

  Everything on my Hotmail and the words are too small to read. How can I make it bigger?

  Have you tried the CTRL + mouse scroll wheel?

• We try to use Adobe Photoshop Lightroom 4 on a new laptop with Windows 10.  Everything on the screen was to small to use.  I got the picture to the center of the enlarged screen, but the words on the side of the screen are still too small to read

  We try to use Adobe Photoshop Lightroom 4 on a new laptop with Windows 10.  Everything on the screen was to small to use.  I got the picture to the center of the enlarged screen, but the words on the side of the screen are still too small to read

  kathleenl62675526 wrote:

  Hi Tanuj,

  There is no place to change fonts.

  You must go to the LR Edit (or Lightroom on Mac) menu > Preferences > Interface > choose 'Options' in the menu 'panels '. There should be a setting for the font size of Interface. You will need to close and restart LR for the font change are taken into account.

• HP Pavilion HPE h8 - 1260t CTO: stuck at the screen with the words "Press ESC for Boot Menu" on the bottom

  I unplugged the graphics card to clean dust. After that I connected everything again, he stuck to the blue screen with the words "Press ESC for Boot Menu" on the bottom. If I press ESC at the beginning, it will go to a black screen and it will show the basic information of the computer (information about the processor and memory). It also show this black screen, "Press ESC for Boot Menu" on the bottom and it will show "Start menu" in the lower right corner. If I press F8 at the beginning, it's going to be the same black screen, but it does not "Start menu" show in the lower right. If I press F10 at the beginning, it will go to the same black screen, and it will show "setup" in the lower right. Can someone help me solve this problem? And thank you very much!

  So I suggest to look at the following and try to 'Clear the CMOS settings' as described at the bottom of the page: HP and Compaq Desktop PCs - specifications of the motherboard, IPISB-CH2 (Chicago).  Then see if there is no change at all.  If there is no improvement, then use the following http://www.hp.com/contacthp, fill in the form, create a folder for your question and then use the information to contact HP.

• HP Officejet Pro 8610: hp 8610 not printing images inserted into the word document

  I tried everything I know to do.  I have a word document that I inserted a photo in and it keeps cutting off my photos.  This is also when I insert a clip art image.  I downloaded new drivers and everything.  I do not lose any information on my file with the exception of the part of the image to the break.  I tried to resize and crop the image.  That did not help either.

  @ljpereira44

  Ok.. A few more ideas...

  Follow him requires a recent Version of Windows - newer than XP - and you run at least Office Word 2007.

  ==================================================

  WordPad

  Copy the document in WordPad, to print the file and verify the results

  --------------------------------------------------------------------------------------

  Replace Images

  Open the Word document > right click on one of the Images > edit image > >

  Change the picture to the Image even where it is stored on your computer / Cloud

  --------------------------------------------------------------------------------------

  Save / print to PDF

  • If you did not, update your Adobe Reader Abobe Reader DC
  • Save the Word document in PDF format
  • Print the PDF file saved as "Real" / "Shrink to fit", check the results of each

• Resizing fonts false pages in all my programs, makes the words overlap in web pages

  I have a HP Media Center under Windows XP and the fonts are small for me. This pc came from my daughter, who crashed it and had a friend fix. Then she gave it to me. When I started the first time fonts, windows, everything was very low. I've got things a little bigger now, but their resizing fake pages in all my programs, makes the words overlap in web pages. Can anyone help?

  Hello
  What version of Internet Explorer? (Can matter)

  Go to control panel > display > Display Properties > settings, try a different screen resolution. "Less" for example 800 x 600 will be bigger on screen "More" for example 1024 x 768.

  In Internet Explorer, view > text size, avoid the 'bigger' try more large, medium or small.

  Hope this helps,
  Don

• BlackBerry Smartphones need help with the word base to use

  I tried endless forums on help to use the basic features of the Doc to go to search. everyone seems to have a problem PDF, attachment problem or another problem of advanced feature, I can just transfer my Word documents on my blackberry and view them. From DataViz Web site had no answer for me.

  I have a BB storm, with VZW, using the most recent 4.7 OS it is a personal phone, so don't think it's a problem of BES.

  I'm not very Savy BB, this is my first phone which does more then call / SMS and I'm sure I've missed a step somewhere, it may not be difficult to get a word in my Storm doc and visualize it.

  I used the Desktop Manager to transfer documents word on my storm, I transferred to the default documents folder.

  I also tried drag-and - drop file to my blackberry just using my PC.

  also, I tried to send me an email and download the attachment.

  I can get the files from my storm, when I go to the media and to "explore" I can see the files, but I can't open them, according to the extension, it is said, is not an RTF file or unable to display file/Media card/blackberry/documents/""".wps

  And when I try to access it directly from the Word go, it appears same.

  Am I missing something?

  Any help would be appreciated, I think I'm missing something or I missed a step somwhere.

  If someone can share with me a step by step how to send a word document (what to save it under) for my blackberry (where to put) and in fact he discovered (where to go) would be great.

  also I missed something permissions? I set everything on Documents to go to 'allow' and reset the firewall.

  Hello and welcome!

  Looks like you do everything right. I just sent myself a doc word opened the email and who launched Word to Go. I then closed and saved and can be found only through Media-Explorer or by first launching WordToGo and then open it. So it seems that something is wrong with yours.

  First thought - there was an update for Documents To Go... the current version is 1.006 (052) - find who spear one of the applications To Go and then open the menu (button BB) and selecting "about...". ». If you are on an older version, first advice is to get the update (another selection in this menu). Then try again.

  Second thought - which version of Word? I noticed my WordToGo talks about reading through Word2004 (I think they mean 2003). If you try to use a document of 2007 (.docx), it might not work.

• Computer makes a sound random bing and the word "Cup" will Flash in the lower right, questions also play photo slide show.

  Original title: random noise

  My computer is to produce a random audio bing and the word "Cup" will Flash in the lower right.  I connected a new keyboard, and then my speakers did not work, then I reconnected it to them.  The speakers work, but now this problem.  Also, I had a photo slideshow on my desk and now as a watch and everytime I try to change it to play the slideshow, it bings and changes back to a photo.   I tried to reboot several times.  Can anyone help?

  Run your anti-virus software, then download and run Malwarebytes Anti-malware program. Delete everything they find.

  Re-post if they find something, but the problem comes back.

  See you soon,.

  Jerry

• Keyboard problem, when I try to type a part of the end of the words by be numbers.

  I have a Lenovo laptop that worked fine until just now when the keyboard or something does not allow me to type words... when I try, part of the end of the words by be numbers.  No, the Cap or Num locks are not on.  I tried everything I know and nothing works.  All of the suggestions.

  Num Lock is turned on, or the keyboard is defective.  Contact Lenovo to get help, as this seems to be a hardware problem, not a Windows problem.  You could also try feeding completely down, remove battery and AC adapter / CC, replace, then start up again.

• Each page is printed with the word 'project '.

  CP1525nw

  All the pages I print, regardless of what program I have prints, prints with the word 'project '.   I am went through the maual, reset everything, check the tips here and may not know how to remove this watermark.

  I'm wasting toner, paper and time trying to get it to stop.

  I'm running on Mac Os X Snow Leopard.

  First of all, so much thanks to HP for a quick response.  Sorry you're solution did not work.

  I have check the updates of the system to Snow Leopard.  Behold, an update utility from HP printer (or something) worded as it was available.  Downloaded, installed and restart.  Whalla, problem disappeared.

  Go figure.

• How can I identify all the words in capital letters and change to initcaps?

  Hello

  I'm using Oracle 11.g

  I have a table with multiple textual data varchar2 columns.  There are several words that are all uppercase.  In all cases, these capital words should be replaced by different cases (for example, HELLO Hello).  How find the capitalized words in all the lines and change them to mixed-case?

  Thanks for your help.

  The rownum in your update statement is probably taken as the virtual rownum http://docs.oracle.com/cd/E11882_01/server.112/e41084/pseudocolumns009.htm#SQLRF00255

  This is probably the reason why the script compiles, but the update does not work as there is no column named rownum in your table (even if it exists, rename it as is among the reserved words http://docs.oracle.com/cd/E11882_01/server.112/e41084/ap_keywd001.htm#SQLRF55621)

  trying to avoid loops to the extent possible, that I see it more as

  CREATE TABLE 'LITURGY_READING_COPY' ("ROW_ID" NUMBER NOT NULL ACTIVATE, VARCHAR2 (4000) 'TEXT')

  Table created.

  insert into liturgy_reading_copy

  Select 1, ' a reading from the letter of Saint PAUL to the Romans: BROTHERS and SŒURS: everything that has been written above... ". »

  of all the double union

  Select 2, "another text, less HOLY inspiration, containing all the WORDS in capital LETTERS

  of the double

  2 inserted rows.

  ROW_ID	TEXT
  1	A reading from the letter of Saint PAUL to the Romans: BROTHERS and SŒURS: everything that has been written above...
  2	Another text, at least the HOLY inspiration, containing all the WORDS in capital LETTERS

  merge into liturgy_reading_copy lrc

  using (with

  init_capitalizer (RID, CBC, res) as

  (select row_id,

  substr (text, instr (text,' ') + 1) | '  ',

  -case when substr (text, 1, instr (text,' ')) = upper (substr (text, 1, instr (text,' ')))

  then initcap (substr (text, 1, instr (text,' ')))

  of another substr (text, 1, instr (text,' '))

  end

  of liturgy_reading_copy

  Union of all the

  Select RID.

  substr (src, instr (CBC,' ') + 1) | ' ',

  RES | -case when substr (src, 1, instr (CBC,' ')) = upper (substr (src, 1, instr (CBC,' ')))

  then initcap (substr (src, 1, instr (CBC,' ')))

  of another substr (src, 1, instr (CBC,' '))

  end

  of init_capitalizer

  where rtrim (src) is not null

  )

  Select RID, res

  of init_capitalizer

  where rtrim (src) is null

  ) ic

  on (lrc.row_id = ic.rid)

  when matched

  then update

  text = ic.res

  Statement processed.

  ROW_ID	TEXT
  1	A reading from the letter of Saint Paul to the Romans: siblings: everything that has been written above...
  2	Another text, less Holy inspiration containing all the words in capital letters

  Concerning

  Etbin

• AI cc of 2015, the words "smart guide ' only appear not

  Hi, I'm looking at a tutorial from Lynda.com on AI. The teacher demonstrated the sovereign on a work plan, and how having the "guides" audited allows words such as 'intersect' shows when you reset both horizontally and vertically on the artboard. I went in edition > Preferences and everything seems OK... the clues as to what I forget? Thanks in advance.

  I re-read your post, sorry. Select your pen tool. Position it in any corner of the artboard. Now, you will see the word "Intersect", as long as the guides are enabled. You will see if you have the Selection tool or the direct Selection tool.

  In fact, it doesn't matter where your zero point is to do this.

  

• When I'm accommodating the toolbar of the new option to arrange the icons on the toolbar toolbar change several tools come with the words "wrong tool" and have no icon associated with them. What are these missing tools 'bad '?

  When I'm accommodating the toolbar of the new option to arrange the icons on the toolbar toolbar change several tools come with the words "wrong tool" and have no icon associated with them. What are these missing tools 'bad '?

  I see you have fixed this now, but I was about to tell you that you could have accommodated in the 'Bad' by its shortcut "I" tool.

  

  To save a custom toolbar, get everything the way you want and click on the button space work, click new workspace

  

  Type a name for the workspace, and check all three options.

  

  If I have to use a single screen, I use a variant of the Essentials workspace with minor panels collapsed and dock for main panels.  I call this Essentials 2

  

  It also seems to me that with all these options, it's stupid not to take full advantage of them, so I separate my most used instruments for their own group and double column toolbar to adjust the screen.  I tried to drop in the groups for the most used tool near the document image (right). I love it, but it take some time remembering the new positions.

  

• Why the words on my Muse not sharp and clean site?

  When I go to preview or put my site in HTML mode, the words are not clear and precise, why is this happening and how to fix?

  I was wrong, I was selected all my text and the scope of the police to come and change everything in Arial in white... I have to do something wrong in the process... I thank you for your help!

• Reference imported from the Word will not be deleted in indesign textbox

  I have an annoying problem!

  I received an indesign doc of my client, they have already imported the text (with styles) of the word to me.

  But now, I continue to have problems wit a footnotecontainer who does not want to be removed from my text box. It remains at the bottom of my text box to indesign, visible with a black line.

  I have tried everything I know to remove it, but goes beyond my knowledge of indesign (which is a lot). Does anyone have a solution for me?

  

  Best regards and thanks, Liek

  Liek,

  I would text van voetnoot weggegooid in het vakje hotel of voetnoot-text. Maar op of pagina zelf staat voetnoot vermelding nog, en DUS squeeze somewhere I toch nog een get onderaan vak. ALS I of vermelding weggooit verdwijnt ook het vak.

  Of gemakkelijkste handle vermelding om you vinden is said:

  1. Klik met tekstcursor in het zijn voetnoot-vak.

  2 Klik daarna om het text rechtermuisknop op menu op you roepen.

  3 Kies 'Ga naar Voetnoot Referentie' (uh... ik heb een myself versie en daar heet to say ' go to the reference to the ".) I what het wel Hij staat min of meer in het midden van het menu.)

  4. of tekstcursor zou nu achter direct of vermelding like Haag. 1 x back en hij is weg.

  ALS said niet proberen lukt we wat anders.

  ---

  (In English, for those who have the same problem):

  1. click in the reference at the bottom zone

  2. in the contextual pop-up menu, choose "go to the reference to the".

  3. Select "go to reference to the" somewhere close to the middle of the list of the menu.

  4. the text cursor moves to behind the reference. BACKSPACE to delete it.

  If this does not work you try something else.