Example: Flag: no sound

Similar Questions

• Where are stored the audio files in Windows Vista (for example the alert sounds Windows Live, etc.)?

  Hello. I would change one or two of my audio files Windows Vista message alerts (kind of like "You have a message", etc.) and I didn't something like this for a few years and on a latest version of Windows (XP). Please can someone tell me how and where I store files new sounds and how to install as new alerts?

  Thank you for spending a few moments to read this.

  Hi MartinUnderwood,

  To use a custom sound when mail is delivered with Microsoft Outlook, Windows Live Mail, Windows Mail and Outlook Express:

  a. Select Control Panel from the Start menu.

  b. make sure you are in Classic view.

  c. double-click on sounds and Audio devices.

  d. go to the sounds tab.

  e. highlight the New mail Notification in the program events list.

  f. Select a sound in the sounds list, or use the Browse button to find a sound not in the list.

  g. click apply and OK.

  Hope this information helps.

• Example: Flag: speaker does not

  I have hp laptop suddenly speakers are not working but headphones are working

  could help me or not

• Example: Flag 23 q119: I tried a mini-keyboard HI and want to go back to the hp wireless keyboard

  I tried a rii Mini keyboard and want to go back to hp wireless keyboard on my in a pc in a single

  Thanks for the suggestion, but no, I had tried that and anything I could think, nothing helps.  Eventually contcted Support HP and they were great. Has taken control of my machine and solved the problem by reinstalling the keyboard driver.

• Example: Flag: hacked?

  a man asked me.  HES not HP or the antivirus software that I have.  He's a pirate?

  ally1 wrote:

  a man asked me.  HES not HP or the antivirus software that I have.  He's a pirate?

  Put that way if you didn't not ask calls from service or on a Service Ticket then think of it as a scam and not to give remote access to your laptop or e-mail or any information about your account. No member of Microsoft technical support or HP support call unless you give your consent for them to call you. Also I would realize that to HP support, or technical support Microsoft that they say that they also ask them to give their Empolyee identification number and dial the number of the folder. That will make them think twice before call you. This is a good method to force them to identify themselves and then you can call HP or Microsoft Support and give the info to verify that this is legitimate.

• generate sound that VI does not work on my PC

  I am trying to run the example vi generate sound.vi on a Dell, Windows 7 computer. DirectxV11 is installed. I get 4800 error occurred at his exit Configure.vi-> generate sound.vi.  The possible reasons: Labview (Hex 0x12C0) Selected device is not valid. I tried selecting devices between 0 and 10, but all gave the same error. I can hear sounds very well of uTube videos. I am at a loss to know what to do next. Suggestions?

  
  

• Sound generator

  Hi people.

  I need a sound generator. However, mi generator doesn't produce a continuous sound. Could you help me?

  Thank you.

  Hello

  Go to help in the toolbar can find examples, look for sound and locate the "Generate sound.vi" The Express VI is not to produce continuous sounds. By the way you should avoid using Express live using screw Express is like peeing in your pants a cold winter day. You can get hotter for a few minutes. But after that, it will be very cold.

• T400 - no sound when playing DVD

  Someone knows a similar to the problem I'm facing.  My T400 fails to any audio output when playing a dvd.  I have no problem with any other audio output other than dvds.  For example - the system sounds, audio cd and audio from the internet are output without any problem.

  I uninstalled the Conexant High Def Smart Audio 221 driver and reinstalled the latest and older versions.  Unfortunately this makes no difference.

  Any help would be appreciated.

  I think're missing you the AC3 audio codec.

  Try to play with VLC.

• ESXi 4 activation on VM sound card

  For personal training, I have the latest version of ESXi installed on a Siemens SCALEO AMD 3800 + with 4 GB DDR

  I managed vsphere Client on a W7 Dell

  Everything works fine, but I can not install the sound card on my virtual machines.

  The configuration of my "ESXi server' does not accept to install"passthrough"on the virtual machine PCI cards

  Is there really an IOMMU compatible CPU or y at - it another way to get the sound on the virtual computer? For example, using the sound card in the machine I use vSphere.

  With ESX, you won't be able to do it somehow (or pass through). What I can recommend is to use VMware View with virtual machines on the ESX - in this way, you will be able to connect to a virtualized desktop (a virtual machine inside your ESX) and listen on your local computer, all what he plays inside the virtual machine. But this demand much more than you have today with an ESX Server.

  Marcelo Soares

  VMWare Certified Professional 310/410

  Master virtualization technology

  Globant Argentina

  Review the allocation of points for "useful" or "right" answers.

• Tecra A9 - cant see DVD player.

  My DVD drive seems to work when a disc is inserted, for example, makes the sound of regular rotation for about 20 seconds, but then stops. It does not show when a CD is inserted on 'my computer '. Restarted but still without success. The device manager says "Windows successfully loaded the device driver for this hardware, but does not the hardware device. (Code 41) ». Any ideas?

  Hello

  Remove the upper and lower registry key filters

  But before you do what you need to access the Device Manager and should remove the CD/DVD drive.

  Then launch the registry.exe and delete the Upperfilters and Lowerfilters completely from the following registry key values:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Finally restart the device!

• Satellite Pro P300-1FP: need drivers Windows XP

  HI -.

  just bought a Toshiba Satellite Pro P300-1FP.

  Came with Vista installed. I would like to use XP instead.

  The aircraft crashed the first time I tried to install XP.
  I looked online and found that I needed to change the BIOS settings to work around this (SATA, "AHCI" to "compatibility").

  This and that the installation worked fine, but there are a lot of missing drivers, for example for the sounds, graphics, ethernet, wi - fi, etc..
  This leaves me in a difficult position since I am currently unable to connect to the internet to look for the missing drivers missing drivers.

  Can someone point me in the right direction?

  Thank you very much

  Alan.

  OK buddy, I want to help you

  First of all he must know that your Satellite Pro P300-1FP belongs to the series of PSPC9E
  You can find the Win XP drivers for this series on the European driver Toshiba page.

  Everything has been published. Just download it

• Re: Where can I find drivers XP for Satellite L40 - 13 G PSL40E

  Please help me, where can I find drivers for L40 - 13G (PSL40E) for Windows XP?

  In the http://ru.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=RU service
  I have found that the 'Installation Instructions' with WinXP filter.

  It seems that XP for L40 PSL40E drivers are not being released at this time.
  It seems that you have to wait until XP drivers will be published

  In any case if you wish, you can try a few singles XP drivers of another series of L40 that several series of laptops are equipped with the same features and sometimes the same drivers, for example, WLan, LAN, sound driver can run on many different series notebooks

  Greetings

• Simultaneous playback and record real-time show levels of vibrations and his Deputy

  First of all I would like to stress that I am very new to Labview (using Labview 2011) and Assistant Sound and Vibration (Labview Signal Express 2011).  I'm starting a project to measure the speech (sound pressure using microphone) and the body of vibration (using the accelerometer) related to the acquisition of data NI 9234.   I looked in the tutorial and the examples provided with Sound and Vibration Assistant (SVA).   These examples allowed me to make a first recording that is connected.  I could view the playback display after I transfer the log to the data view.   Frankly I'm more sure of my measurement data if I could observe the timewave with speech variation.  I wonder if this is possible.  If it's possible, thanks in advance for pointing the direction.

  Thank you.

  Abu Dzarr

  You can look at the data, because it accumulates in one of two ways:

  1. Create a viewer and drag out of the acquisition apparatus in the Viewer.  It will give you a live view of the data.
  
  
  2. Create a viewer and drag the newspaper in the Viewer.  By default, this should show you that the current buffer being written to the file.  You can change that to click with the right button on the graph to view in the viewer and selecting show the whole graph, a static part of the graph, etc.

• How to connect to the list of the pins for a redeclenchables pulse train

  Hello

  I'm relatively new toDAQmx, especially for the counters. I have problems to determine what pins to plug on the DAQ card. I would like to run the vi described here, but am not sure how to connect the card. I looked at the manual of the X series for the pinout descriptions, but I don't know how they apply to the program on this page. When I connect DOOR a meter, THE, A, B pins, etc.?

  Any input on what to connect or pages that may make how to connect the counters would be very useful.

  Thank you.

  Your most recent post of links to an example more advanced sounding & I recommend that stick you with something simple to start.

  Your first post links to such an an example where the signal of pulse train going out of Ctr0_Out.  Ctr1 is used to make the trigger and the 'break' (enable / disable) Ctr0.  However, much of this stuff is configured using some features of DAQmx such that you don't need to physically connect the pins between the two counters.

  Only physical wiring that you need is to plug your physical digital trigger to the PFI1 signal and connect Ctr0_Out to some external thing must receive them.  As long as your device is called "Dev1", I think this example to work.

  I know there are some docs useful for more general info on the pins meter & behavior, but I don't remember quite so that I have not watched for them for many years.  Meanwhile, here is a * little * bit General description I wrote myself once.

  -Kevin P

• datasocket VI of the client side just stops

  Hi guys, I'm trying to send his micro-captured to another PC (two PCs connected by a crossover cable). I tried various options such as TCP, Datasocket but nothing has worked. With TCP, it always shows the input buffer overflow. With Datasocket, it shows no errors, but stop just the VI on the remote PC. I was not able to understand the problem. I'm using LabVIEW 2009 version 9. I enclose two screws for your tests. Help, please. Thank you. Kind regards.

  Hi Rocky,

  I looked at your code and made some changes. First of all, I couldn't tell why you were dividing the samples/ch by two for the audio playback function. I disabled who. In addition, the "initial data" fed you on the first 'handwriting' VI and at the entrance to the function default data DataSocket Read was a cluster of waveform. Audio data sent through the connection DataSocket are an array of clusters of waveform (a cluster by channel). This probably caused DataSocket problems for you.

  I put the configuration values of the sound of what I found in the example of "continuous sound Input.vi' VI. I also added some graphics for Visual indications.

  Note that you must have the DataSocket Server (under windows: start-> programs-> National Instruments-> DataSocket-> DataSocket server).

  If these don't work, I would look at the network/firewall issues. Also, if you want less latency, consider using UDP straight-up. He should have fewer resources than DataSocket (and with a filter connection, I guess you won't have much to worry about data loss).