Problem in the use of data dashboard

Similar Questions

• Limit the use of data on home network

  Hello

  I currently have three computers connected to a wifi modem with two computers running vista and a Mac SL running. I was wondering if it was possible to limit the daily use of computer data? I have experimented with the settings of the router/modem, but there is no built-in feature.

  Modem: 2701 HGV - W (bigpond)

  Any help would be fantastic.

  I have no idea on the SL Mac (you will need to post this question in a Mac forum or contact support Mac), but as far as Vista goes, certain limits can be defined in part by using parental controls and in part by using permissions (but it depends on exactly what you want to say that I am addressing the following).  No process will actually limit the use of network data (although they can help you to set other boundaries that can help).

  In Vista, here is the procedure for setting up restrictions. http://windows.microsoft.com/en-US/windows-vista/Set-up-Parental-Controls. Once you have access to parental controls, and then go to the section of deadlines and follow the instructions there (or for the other sections).  Technically, it's not a way to limit the use of data in itself - if by here you mean the amount of data accessed for a specified period (but you can limit the data that is used, what programs are available, what websites are allowed, when the computer can be used and several other things.  To limit the available data, you use permissions rather than Parental control, but well enough that is already treated as system implements security rights to prevent users other data and you can do this for any folder that you create outside profiles (while the file system are almost already protected - even on your part).  If you mean data over the Internet, then there is no way I know in Vista or IE which limit explicitly by the user.  Keep in mind that this will only work with standard user accounts as account administrator can simply replace the limitations or remove them all.  I know that's not what you asked really, but I thought that I should bring him as he is very much related.

  Now for the good news that you want can be done with the 3rd party software free.  See the following:http://www.ampercent.com/control-internet-data-usage/4572/.  This seems to be exactly what you want and should do the trick.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Dynamics Processor Calc does not reach more than [100] ESM blocks during the calculation, please increase the CalcLockBlock setting, and then try again (a small data cache setting can also cause this problem, check the size of data cache setting).

  Hello

  Our environment is Essbase 11.1.2.2 and work on Essbase EAS and components of Shared Services. One of our user tried to execute the Script of Cal of a single application and in the face of this error.

  Dynamics Processor Calc does not reach more than [100] ESM blocks during the calculation, please increase the CalcLockBlock setting, and then try again (a small data cache setting can also cause this problem, check the size of data cache setting).

  
  

  I did a few Google and found that we need to add something in the Essbase.cfg file as below.

  Dynamics Processor Calc 1012704 fails to more blocks ESM number for the calculation, please increase the CalcLockBlock setting, and then try again (a small data cache setting can also cause this problem, check the size of data cache setting).

  Possible problems

  Analytical services cannot lock enough blocks to perform the calculation.

  Possible solutions

  Increase the number of blocks of analytical Services can allocate to a calculation:

  1. Set the maximum number of blocks of analytical Services can allocate at least 500.
     1. If you are not a $ARBORPATH/bin/essbase.cfg on the file server computer, create one using a text editor.
     2. In the essbase.cfg folder on the server computer, set CALCLOCKBLOCKHIGH to 500.
     3. Stopping and restarting Analysis server.
  2. Add the command SET LOCKBLOCK STUDENT at the beginning of the calculation script.
  3. Set the cache of data large enough to hold all the blocks specified in the CALCLOCKBLOCKHIGH parameter.
     • Determine the size of the block.
     • The size of wrestled data.

  In fact in our queue (essbase.cfg) Config Server we have given below added.

  CalcLockBlockHigh 2000

  CalcLockBlockDefault 200

  CalcLockBlocklow 50

  
  

  So my question is if edit us the file Essbase.cfg and add the above settings restart services will work?  and if yes, why should change us the configuration file of server if the problem concerns a Cal Script application. Please guide me how to do this.

  
  

  Kind regards

  Naveen
  

  Yes it must *.

  Make sure that you have "migrated settings cache of database as well. If the cache is too small, you will have similar problems.

• How will I know if I am being charged for the use of data on the mini2 ipad

  How will I know if I am to be charged or billed for usage on my ipad mini data 2?

  Hello

  You can be charged for the use of data on an ipad, if it has a SIM card

  Cellular data.

  If your home wifi is unlimited you will not be charged more.

  Unless your WiFi has a hat of data ie download limit.

  See you soon

  Brian

• Restrict the use of data - WLAN controller

  Hello

  I am designing a solution for a hotel WiFi facility. This is mainly to provide access to the visitors of the hotel.

  I wonder bandwidth throughput on a per customer basis - which I know can be done on the controller.

  I was also asked to verify if the use of data restrictions may be implemented by the customer.

  For example, they want that the restriction of the use of 1 GB / 2 GB on their visitors, after which they are not able to access the network without additional authorization.

  Is there a way to do this on a Cisco controller?

  Thank you

  Rahul Nair.

  This doco is convenient for the speed limit:

  http://www.Cisco.com/c/en/us/support/docs/wireless/5500-series-wireless-controllers/113682-BDR-limit-guide-00.html

  In addition, Rasika explains very well vs TCP UDP in a blog:

  https://mrncciew.com/2013/05/01/per-user-rate-limit-in-WLAN/

  Regarding limiting the total data of a user; I don't think it's possible with just a Cisco WLC. You would probably need some kind of third-party tool... I can't find much except this post earlier which is probably still very relevant:

  https://supportforums.Cisco.com/discussion/12101991/guest-WiFi-solution-hotel-industry

• I am facing problem in the use of applications of windows8. I am not able to use even a single App. What shoulg do. ?

  I am facing problem in the use of applications of windows8. I am not able to use even a single App. What shoulg do. ?

  Hi Shubham,

  You receive an error message when you try to use the Apps in Windows 8?

  Exactly how have you connected to the computer (Microsoft Account or Local account)?

  follow these steps to solve the app suggested you nuisance.

  Method 1:

  Run applications troubleshooting

  I suggest you to download and run the troubleshooter modern UI App.

  http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

  Method 2:

  I suggest you follow the steps in the article. Here is the link for your reference.

  What to do if you have problems with a soft

  http://Windows.Microsoft.com/en-GB/Windows-8/what-troubleshoot-problems-app

  Method 3:

  I suggest that you check the proxy settings because if you use the Proxy Server, then the Apps in Windows 8 will not work.

   

  a. click on thegear box in the upper right corner in Internet Explorer.

  b. click onTools and then click Internet Options.

  c. click on theConnections tab, and then click LAN settings.

  d. Uncheckuse a proxy server for your LAN .

  e. clickOk.

  Hope the helps of information provided.

• Problem with the use of MID/LEFT functions

  I have a problem, see the point of these functions if (as seems to be the case) they will not allow another cell to be referenced.

  I want to do a SUMIFS with match being the first four characters of another cell data. I can't find any way to do it without manually copying the first four characters in another cell.

  If I use only LEFT like this:

  LEFT ('ABCD', 3) to derive 'ABC '.

  so why would just enter ABC in the first place? But that's what show examples and any attempt to do what I really want

  that is LEFT (F19: 3)

  causes a syntax error.

  I believe that I'm missing something really stupid, but I'm darn if I can see it.

  Hi jon,

  LEFT (F19: 3)

  causes a syntax error.

  Try a comma in place of the colon

  

  = LEFT(B2,3)

  It's your area used for the decimal point. If you use the comma for decimals, use a semicolon in the formula, = LEFT(B2;3)

  Kind regards

  Ian.

• Problems with the transmission of data between the screws

  Hi all.

  I have a question where my program slows considerably during the race.

  The program is a producer-consumer, where I have the main consumer loops and loops producer for USE comms, measure the output power, input for measuring the power, thermal control, etc..

  Regarding the issue, the measures of output loop takes readings and transmits the data to a separate VI which remains running (measure of output processor). This VI summarizes and on average the data and also displays data for the operator to see details if necessary. The operator shows and hides the front panel of this VI with a button on the main program. This VI also returns the summary data to the main VI, where it is read by my loop of consumer.

  The main measures output VI loop takes about 200mS to run when the program is first started. Less than a minute, it is 400 MS, and it's all downhill from there.

  I've isolated the problem to the way I pass data back (I think). I couldn't find a way to pass the reference of the queue between two screws not connected by wires. I open a reference to the VI processor and use Ctrl Val.Set and Get to pass the data back. If I take the intersection of the Subvi data, there is no slowdown.

  My questions are:

  (1) why the data passing by invoking a node of the control on the target would cause the downturn?

  (2) how would I get/pass information of queue between the two screws are not connected?

  (3) Alternately, could I start the VI processor in my main program, run and pass data in and out of it? I want to keep it running, because it is also part of the user interface.

  I don't know that I have not explained this very clearly. I took some screenshots of my code, but don't see how to download here.

  Thanks in advance,

  Jim

  
  

• Problem with the acquisition of data on XP Embedded

  Hello

  I'm using LabView 8.5, 8.7 DAQmx. My application is collection of data of NI USB-6009 14bits. I tried to create applications for tablet PC with installed Windows Xp Embedded. I created the installer on tablet with installed Windows 2000.  I solved all the problems that occurs during installation. First version of the program have assistant DAQ in a main VI who collect and process the data. It worked properly on Xp Embedded. Second version was split into two of the Subvi. One is data collection and secondary processing. Each VI have own while loop. Both Subvi is placed in the large loop and they start at the same time. I am writing all the data to global variables. On PC with the windows application created 2000 worked properly. Error occurs when I moved it to Xp embedded. VI, which is the collection of data, the error see the 200361 code and text:

  DAQmx reading (analog 1-d Wfm NChan NSamp) .vi:2
  The task name: _unnamedTask<0>

  I know its something with the sampling and the clock, but I do not see where is the problem. In the main loop and two Subvi I 'wait until the next ms Multiple"block with a value of 200. DAQ Assistant were set as follows:

  Price: 1000

  Number of samples: 1000

  Timeout (s): 10

  Can you tell which can cause this error?

  If you would like more information please write here.

  Problem solved. There was connection between PC and USB-6009. Program works when I connect the USB-6009 housing directly to the PC. Previous connection was through usb hub.

  Thanks anyway.

• A few questions about the use of data and Cliq

  I have the cliq, however I chose to not get 3G (so I bought full fare). So I have a few questions about the phone and the use of 3G / 2 G/Edge:

  1 - is possible to disable completely the 2G / 3 G/Edge? I know you can switch between them, but are anyway just tell the phone to stop using them altogether since I'm not subbed to the service?

  2. when the update takes place, I guess we'll have to reconnect motoblur and etc, but if I don't have 3 G will I have motoblur connection problems after the update? Or he keeps the latest wifi settings so that it would connect to wifi to connect. When I first got my phone it was not a problem b/c I had 3G for the first month.

  I hope that makes sense, thanks!

  To stop all the data, I would like to download an application called APNDroid. He cut them all down. When you log on to blur you have 3G or WIFI doe this without getting a timeout error. During the process of setting up your Blur account, you can press the menu button and set up your wifi to work, this will connect you to Blur and your phone will be connected to the blur. If I were you I would be rethinking to do a data plan since you are really losing out on most of your main features of phones. It's your choice, however.

• Help, please! Problem in the use of http to call the url?

  Hello

  I develop application for Blackberry 8830, which is the cdma device. I want to develop the application that uses the http protocol to call url and gets the response. To use http everything I read there about 5-6 ways. But the only one that fits my needs is direct TCP. But my service provider in India i.e. Auntie Indidcom says that there can be no adjustments to the AFN for CDMA phones. What should I do now. I don't really know if that's the only problem.  I have this thread

  Different ways to connect with Http.

  There are six ways mentioned below: -.

  1 blackberry Enterprise Server with Blackberry MDS - I have Blackberry Enterprise server, so this is not possible.

  2. blackberry Internet Service - for this, the Alliance with the RIM so still no thuought on this subject.

  3 order TCP - do not get the APN settings

  4 WiFi network - I'm not network Wi - Fi is also to the equation.

  5. WAP Gateway - not looked into this yet.

  The only way I thought direct TCP, but it requires settings APN, but the message that I received from the people of Auntie, it's that the APN settings is supported for GSM based phones and not for CDMA phones. So is it possible, if yes, then please let me know, its urgency.

  Here is the code that I use for the connection.

  HttpConnection httpConnection = null;
              DataInputStream dis = null;
              DataOutputStream dos = null;
              url = "http://mailonphone.com:8180/automaticlicensing/LicensingServlet?" +
                    "UserName=ilesh&Password=ilesh123&SiteCode=012345678901234567890&" +
                    "ScratchCard=05533978;deviceside=true";
              System.out.println("URL=>" + url);
              try
              {
                  httpConnection = (HttpConnection)Connector.open(url, Connector.READ_WRITE);
                  httpConnection.setRequestMethod(HttpConnection.POST);
                  InputStream istrm = httpConnection.openInputStream();
                  String resMsg = httpConnection.getResponseMessage();
                  System.out.println("REsponse Message=" + resMsg);
                  int length = (int)httpConnection.getLength();
                  String str;
                  if (length != -1)
                  {
                      byte servletData[] = new byte[length];
                      istrm.read(servletData);
                      str = new String(servletData);
                  }
                  else  // Length not available...
                  {
                      ByteArrayOutputStream bStrm = new ByteArrayOutputStream();
                      int ch;
                      while ((ch = istrm.read()) != -1)
                          bStrm.write(ch);
                      str = new String(bStrm.toByteArray());
                      bStrm.close();
                  }
                  System.out.println("Registeration Key=>"+str);
                  int in=str.indexOf("");
                  int en=str.indexOf("");
                  key=str.substring(in+6,en);
                  key=key.trim();
                  System.out.println("KEy="+key);
              }
              catch(Exception ex)
              {
                  System.out.println("Error while calling url");
                  key = "In catch while calling url";
                  //sendMenuItem.setText("Message not send");
              }
          }
  

  If there is a problem in the code then let me know also. I could not test this even on the MDS do not work on simulator emulator. Look into that, but if its related to another question please let me know.

  Thank you & best regards

  Sunil

  The exception it throws in wrestling, will give you an idea about the problem.  I suspect something is wrong with your data, for example, you have specified HttpConnection.POST, but you provide no post data, so I think that you really wanted to say HttpConnection.GET.

  WAP 2.0 does not work on the Simulator.

  I recommend that you get your code work using the Simulator (i.e. ";) deviceside = true') until you are exposed to problems trying to connect on a real device.

• Surplus of the use of data in Windows 8

  Hello!

  I came with a problem in the Windows 8 x 64 operating system.

  I recently bought a new laptop with windows 64-bit preloaded OS 8.

  I used the mobile internet dongle to access the web in my old windows 7 PC so far and large worked.

  When I connect even with windows 8 PC, data usage exceeds the limit.

  After reading a few suggestions on the internet, I have disabled Windows Update, updates live tile on start sync settings screen, and my connection of device to inhalers.

  Even I put all downloadable options to Off, the volume of data download is much higher.

  Even I tried to stop BITS (Background Intelligent Transfer Service), its doing the same thing. When I restarted my PC, BITS started even his startup set to manual.

  I searched the internet and cannot find a perfect solution.

  I can't spend my time and don't want to lose my data.

  Please resolve this issue otherwise I'll go for the best ever Windows 7.

  I solved the problem by installing 'Open Suse Linux'

• Problems with the debugger in Data Modeler Beta DDL Custom Transformation Scripts

  Hello

  I use Oracle SQL Data model Beta 4.1.0.866.

  Currently, I am working on a project to generate the models in PHP for our relational database models MVC framework. Some settings must be entered from the user,

  so, I'm importing Java classes for JOptionPane in the Transformation of the customized with DDL Scripts

  var ji = new JavaImporter(java.io, java.lang, javax.swing, java.util);

  I can use these classes with no problems, but when I want to use the debugger, it cancels the execution with this error message:

  

  Is this a bug or am I missing something here?

  And would it not possible and even preferable to processing entirely in Java instead of JavaScript scripts?

  Hello

  Try it following the syntax:

  var ji = new JavaImporter(java.io, java.lang, Packages.javax.swing, java.util);

  And would it not possible and even preferable to processing entirely in Java instead of JavaScript scripts?

  Well, it's not on the use of JavaScript, it's scripts in Java Platform - JSR 223 https://www.jcp.org/en/jsr/detail?id=223

  So if you have a JSR 223 engine of script in the JAVA virtual machine you can use your scripting language. We simply provide a setting where you can put your scripts to do something useful.

  We don't know in advance what language will be used. JavaScript engine is included in Java6 and Java7 so this is the reason why our examples are in JavaScript.

  Using Java instead of JavaScript don't make the job easier, look at the part of import here - Re: impossible to cast objects in the Script SQL DM 4.0 Transformation

  Philippe

• problem with the type of date dd/mm/yyyy

  Hi all!
  I want to do something simple.
  to get a type of dd/mm/yyyy string and convert it ti date jj/mm/aaaa type.
  I wrote simple code
  String pattern = "dd/MM/yyyy";
  SimpleDateFormat format = new SimpleDateFormat (pattern);
  try {}
  Date = format.parse("12/03/2006");
  System.out.println (date);
  } catch (ParseException exception) e {}
  e.printStackTrace ();
  }
  
  but the problem that I get Sun Mar 12 00:00:00 GMT + 02:00 2006
  and I want to get this format dd/mm/yyyy.
  because I need to insert it in my db. Thank you all

  First thing: almost always if a SQL statement uses variable data, use a PreparedStatement. With the help of a simple statement can, at first, most obvious glance, but it will cause endless problems.

  The constant strings in SQL are "single quotes" i.e. apostrophes. They must at least cannot escape string constants. One of the reasons for always using class PreparedStatement is that you concatenate in a string value may contain an apostrophe. In this case it will be, at best, give your SQL syntax error. Worse it can make your system vulnerable to hackers.

  Use code publishing code tags. Put the word 'code' braces before and after. This makes your code readable.

  The field attribute by DEFAULT when you create a table must be a real date, not a model. I have never know this is useful for a date, except if it set to pick up the current date.

• Satellite P200 - problem with the use of disk HARD original as external drive

  I've been pulling on my hair for a month now and could do with help

  I have a Satellite P200 series PC laptop and have recently updated from the 200 GB for a pair or 320 GB HARD drive. No problem

  The question I have is that the old drive of 200 GB system I am unable to use it in any other machine or according to and external storage device.
  The original secondary disc works fine few matter where I use it... (In my PS3 at the moment)

  When I install the orgional system drive in my laptop and rebuild windows it it still works 100%.
  Hance a good work of 200 GB of HARD drive.
  Take it out and serve in another machine of storage that it won't - boot all I get is cyclic redundancy errors

  I formatted, low level run endless disk tools
  WD test came back with diagnostics Test::Read 11 - cable sector error!

  Even as a drive on the original laptop is the same

  All ideas taken with gratitude that I don't want to lose a good 200 GB HARD drive

  Thank you very much
  Roger

  Hello!

  The external box is maybe defective, because you said that the HARD drive works in your laptop and the PS3 without problem.
  You can test the HARD drive in another external case?

  WD test unknown to me but I always use the Drive Fitness Test:
  http://www.HitachiGST.com/HDD/support/download.htm#DFT
  With the Drive Fitness Test, you can test your HARD drive. Download the CD image, burn it to a CD and boot from it. You can then the HARD drive.
  On the same site is a user's guide if you want to know more.

  Good bye