Example: Probook 6555 b: check the disk

Similar Questions

• I was using my MacBook today and it crashed and the dock turned silv, I restarted the mac and it was always the same, then I loaded the disk utility and checked the disk and it says disk is fine. It flashes inconsistently gray and the dock turned

  I was using my MacBook today and it crashed and the dock turned silver, I restarted the mac and it was always the same, then I loaded the disk utility and checked the disk and it says disk is fine. It flashes inconsistently gray and the dock has transformed money! I tried to restore Mac OS and then also the same!
  OS El Capitan

  This can help:

  Reboot safe mode (it is a slow process):

  -stop of the mac

  -Start up the mac in shift, press and hold until you see appear it to progress bar, so you can let go

  -When everything started, connect

  -Once connected, stop the mac once again, nothing else is necessary.

  -restart normally.

  Lex

  PS: This clears all system caches.

• Solutions error checking the disk and Restore Point, pointing to the other.

  Yesterday, my wife picked up the package of virus Security Suite from somewhere and remove, I picked up an error when the disk check runs at startup. Check disk claims it is an error, check the drive and suggests restore since my last restore point. But when I do this, restore the system claims I have a disk error and I need to run the disk check. Which brings me right to the beginning of this problem.

  I'm running 32-bit Windows 7 Home Premium, and have enabled the Windows updates. I use AVG and Malware Bytes to protect my system.

  Thank you!

  Bill Haworth

  You can run check disk from safe mode? This is a level of command prompt:
   
  CHKDSK x: /F /R
   
  Where x: is the drive that you control.
   
  "bill_haworth" wrote in message news: 9c836e2b-b164-44a7-b516-5d5302cca9bf...
  > Yesterday, my wife picked up the package of Security Suite virus from
  > somewhere and back, I picked up an error when running the disk check to
  > start. Check the disk says there is an error, check the drive and
  > suggests restore since my last restore point. But when I do
  >, System Restore claims I have a disk error and I need to run
  > Check the disc. Which brings me right to the beginning of this problem.
  >
  > I am running 32-bit Windows 7 Home Premium, and made Windows updates
  > on. I use AVG and Malware Bytes to protect my system.
  >
  >
  >
  > Thank you!
  >
  > Bill Haworth
  >
   
   

• Check the disk for consistency

  I read messages will this question hide two to five years. I guess my problem is the same: black screen on startup with white 'BACK', writes, "one of your disks needs to be checked for consistency. You can cancel the disk check, but it is strongly recommended that you continue. Windows will now check the disk. "What has happened three times in the last two months, and nothing was found in the mess at the end of the audit.

  Responses to previous posts are frankly discouraging - at least for me. I want to know is if this disk check is a signal that all is not well with the computer, or if it's just a gene that will probably calm down. Would it not be in my interest to call a repairman? I'm not interested in venturing into the only registry.

  Thank you.

  There is nothing remarkable or unusual in the chkdsk report, no bad sectors or the reported bad clusters.  Run the utility of diagnosis of the constructor on the drive and see if it reports disk problems, go to the web site of the manufacturer of the drive for the utility.

  John

• Check the disk recovery image it is stuck at 56%

  I created the Recovery Manager recovery discs and the process stopped at 56% when checking the image of a disk after you create it! I let it sit for more than an hour and he sits up to 56%!  I was wondering should I cancel the process or wait and so if she does not change and I have to cancel I will be able to restart the process or is this my only chance presence it say that you cannot create more than one set of recovery discs!

  my computer is a HP Pavilion dv6 notebook pc windows 7 Home premium 64-bit

  Usually, if the process does not properly complete, you can start no later than. HP can even send a free statement if you tell them that your software is unable to create the whole. Access to worldwide here contact information >

  Contact HP

• Check the disk does not

  When you try to run the disk check or sfc/scannow a screen small black consol flashes on the screen for a fraction of a second and disappears. Nothing else happens!

  Simple help please.

  Thank you both for your valuable advice.

  I have never run once before (2 or 3 years) and could not remember how!

  I had a couple of niggles that need looking at, if they come back I will post back.

  Once again, thank you, problem solved.

• Check the disk does not start if he had to run when you restart the computer.

  I selected automatically fix system errors file and Scan for and attempt recovery of bad sectors.
  I was prompted to reschedule the disk check for the next time you restart your computer. 

  However, when I rebooted my computer, nothing happened. No disk check has been performed. I tried tha procedure above a couple of times without success.
  
  
  Someone please help I was able to do this before, but can't do the job now?  Thank you.

  ACHOIWONG,
  Well, it's system files to discover good good news.  Is probably why chkdsk does not work due to not having permission start upward.  Try to run it from an elevated command prompt:
  Click Start and type cmd in the box start the search.
  Right click on cmd in the list programs, and then click Run as administrator.
  If you are prompted for an administrator password or a confirmation, type your password or click on continue
  At the command prompt, type chkdsk c:/r

  Try and let us know if it works.
  Thank you
  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Check the disk stopped running

  I have a disk check run on my computer after the startup. He stopped at 41% full and seemed to be frozen. I turned off the computer and when I turned it on again, he went to the disk check automatically and is stuck at 41% again. I really just want this disk check. I'm sorry that I tried to do a few "maintenance".

  If the memories are good, you can cancel the disk check if you press a key within 10 seconds after the message that the disk check is scheduled appears on the screen. However, the fact that the system blocks on the disk check can be alarming.
  Check if there is no disk activity hard while the disk check is stuck at 41% (check the HDD LED or any Visual indicator on your box), check if you can hear the work of the disc. Finally, give him time (even an hour or two). Depending on the amount of data and errors do you repair process may take some time.

• Check the disk with Vista Home Premium

  I'm doing a disk check on my C drive with windows Vista, Home Premium, ed. I get to the point where it asks if I want to plan the audit to the next time I start the machine. But when I check that, close and restart, nothing seems to happen that my normal startup. Why is it not showing me that a disk check is happening or why it's starting the disk check? Thank you.

  Have you tested the hard drive itself with the maufacturer of hard disk diagnostic utilities?

  `~`

  The current time and the date now in Oregon, United States

  15:33
  Sunday, July 7, 2013
  The time Pacific daylight time (PDT)-0700 UTC
   
  UTC/GMT is 22:33 Sunday, July 7, 2013
              
  Current weather conditions in Portland

  Cloudy67 ° F / 19 ° C

• Win Vista: Restoration of the window tells me that there may be errors on the disk, check the disk fails or the other.

  Restoration of tell me that there are errors on the disc that allows the utility disk check, who then told me that it won't work while Windows is running and asks if I want the calendar for the next restart of Windows, I have check the Yes box and try to fix the errors. When I restart or turn off and on, nothing happens. It restarts normally.
  I wanted to restore it's because my laptop (dell inpiron 1525) is not hibernating or sleep I noticed after installing the updated drivers from dell. When I went to use the sys restore is when I noticed what is happening now.

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-system-repairs-from-the-Windows-recovery-environment-from-Windows-Vista-inside-out

  --
  ..
  --
  "spaz12" wrote in message news: 9fff9795-78 c 0 - 4A 41-9652-a30919d15ea2...
  > Restore tell me that there are errors on the disc which shows the disc
  > launch utility, who then told me that it won't work so that Windows is check
  If I want to schedule for next time window
  > restarts, I check the Yes box and try to fix the errors. When I restart or turn
  > and now turn it on, nothing happens. It restarts normally.
  > I want to restore it's because my laptop (dell inpiron 1525) is not
  > hibernation or sleep I noticed after installing the updated drivers
  > from dell. When I went to use the sys restore is when I noticed what is
  > right now.
  >

• Cannot run the disk error check: check the disk has been disabled by a program use system restore.

  Title: How re - enable disk check after it has been disabled?

  I used a registry repair whichremoved all system restore and disabled of the disk check points. How do I re active chkdsk as he wants me to restore which I can't?

  I used the free registry repair recommended by c-net

  original title: re enable check disk

  Hello

  Follow the steps mentioned below and check if the problem persists.
  File system (CFS) Checker
  SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.
  To run the System File Checker tool, follow these steps:
  (a) click Startand type cmd in the box start the search.
  (b) click on cmd in the list programs, and then click run as administrator.
  If you are prompted for an administrator password or a confirmation, type your password or click on continue
  (c) at the command prompt, the following line and then press ENTER:
  sfc/scannow
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7?
  http://support.Microsoft.com/kb/929833
   
  Hope this information helps.

• chromebox: check the disk usage and the amount of available disk space

  How can I check the amounts free space on disk 16 GB and the amount used by different programs and files

  Thank you

  Stanley

  Hi @canninggm ,

  Thank you for visiting the Forums HP's Support and welcome. It's a great site for information and questions. I looked in your question about your Chromebook and wonder about the free space on your SD here a link to show you how to check.

  If it helps here is the link Central Chromebook help Forum. They would be better placed to answer your concerns about their products.

  Thank you.

• How to check the disk IO in ASM

  Hi all
  
  
  I installed the node 2 (10.2.0.4.0) RAC on Enterprise Linux 5.2. I use ASM to manage the storage of the database using EMC SAN (CX 320). I configured the separate LUNS for data files, archive logs, Redo Log by using RAID 1 + 0. Do not use multiple paths currently.
  
  How can I check the IO activity, hotspots, etc. for instance ASM disk? Also seeking your advice experts monitor the I/O system. Scripts or utilities I can back the cause of high i/o. (Using iostat and oswatcher now, but it is difficult to interpret the results).
  
  Thank you
  Naveed

  V$ asm_disk querying is an expensive operation like compartive of v$ asm_disk_stat.

  Soon I will download the difference.

• Check the disk continues to run when I turn on my computer

  Whenever I turn on my computer. Check the disc is still running. I have let it run before and I restart my computer and it works again. When I let the program run, he never finds anything and it's getting boring. Can anyone?

  Whenever I turn on my computer. Check the disc is still running. I have let it run before and I restart my computer and it works again. When I let the program run, he never finds anything and it's getting boring. Can anyone?

  1. click on the start menu and open the Run dialog box.

  2. Type "cmd" and back (Note: don't enter quotation marks)

  3. then type "fsutil dirty query c:."

  4. If the returned message indicates that the volume is dirty, proceed to step 5

  5. then type "chkdsk c:/f/x.

  6. after that finshes repeat step 3.

  7. If it is no longer dirty then reboot and the problem should be solved.

  If you continue to receive the drive guest check after completing the above steps follow the instructions HERE

• How to check the disk in El Capitan?

  Hello

  In El Capitan disk utility is not my favorite.

  How can I check disk in El Capitan?

  Thank you

  Get over it and use disk utility.

  Otherwise, open Terminal.app and use the command 'diskutil. "

  C.