Excel (2007) tdms plugin (worms) 3.1 for Win 7 (64 bit) seems to not work.

Similar Questions

• HP psc 750xi - USB connection. for windows7 professional 32-bit. driver does not work.

  HP psc 750xi - USB connection.  New windows7 professional 32-bit.  I downloaded the proposed driver from hp.com but ' the selected printer is not currently supported by this wizard ".  Help

  Hi flojo9,

  Follow the steps below to load the driver for Win 7.

  1. open devices and printer

  2. click on add a printer

  3. replace the USB port and then click Next

  4. click on Windows Update (step 1)

  5. once the update is complete, you will need to select the PSC 750xi driver in the list on the right (step 2)

  

• HP Pro 240 G2 Wireless for Windows 7 64-bit Driver has not worked...

  Dear master...

  I have new HP Pro 240 G2 also I already download driver all on: download driver-driver HP portal.

  Here is the link

  http://h20566.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdHome/?sp4ts.Oid=6431919&spf_p... -Network

  But I have a problem to install the driver for the wireless, I tried to install all the suggestion of driver on this page, but if I try to install, an error message seen on my desk.

  As the driver cannot install properly.

  Hopely this forum I can receive the best response to solved...

  Dear Paul,

  I found the best driver to resolve this problem, maybe can help another people

  You can download the driver.

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5405424&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_123191_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• Is there an Excel to TDM plugin for LabVIEW 2009

  I downloaded the Excel to TDM plugin and could not run. Dialog error usiReg said "this configuration file was created with a new version of the ICU and can not be used with the software you have installed." I installed LabVIEW 2009 SP1 and the .net version is 4.0. Y at - it another version of the 9

  the plugin I can use? Is there something else I can do, or am I just out of luck, until I update?

  Hello

  the functionality to open Excel files has been added to the ICU starting with version 1.8. However, the ICU in the manner described above upgrade you will register to use ExcelTDM and make it available through the _openWithRoot.vi in LabVIEW 2009. Simply install or DIAdem 2010 NI LabVIEW 2010 as a demo version.

  Please see also the comments from readers on the page of ExcelTDM use, a client has requested the use of using Excel in older versions of DIAdem:

  ExcelTDM use

  Greetings,

  Uwe

• My Inbox to view the sender for each message and now it does not work... How do I get it back to where it was?

  My Inbox to view the sender for each message and now it does not work... How do I get it back to where it was?

  Right-click on the header at the top of the list of messages and select from the list of options.

• HP envy 14-u009tx: help! need driver for wifi for win 7 64 bit

  Please help me,

  I was buy laptop, HP envy 14-u009tx

  original is using win8, but I am familiar with this os, so I'm going down for win 7 64 bit.

  Please someone help get this wifi driver. using braodcom.

  hardware ID here:

  pci\ven_14e4 & dev_4365 & subsys_2230103c & rev_01

  THX before.

  Hello:

  You need this driver:

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_133353_1#tab1

  You will also need this driver bluetooth:

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5405106 & swItemId = ob_132205_1 & swEnvOid = 4058

• Satellite P50T - Was: need VAP for Win 7 32 bit

  When I try to download the 32-bit version of added value package for the Satellite P50T-A (Windows 7)
  Download link
  The downloaded file is
  http://Support1.toshiba-tro.de/Tedd-files2/0/VAP-20130916115251.zip
  What in fact is the 64-bit version! (I checked, the link is the same when you choose 64 - bit)

  So I can't install it.

  Could you give the right link?
  Thank you!

  You're wright; is the PPV v 1.6.0037.6400 for Win 7 64 bit (.6400 means 64-bit)
  The VAP is not related to the laptop model/series, but its associated software system.
  You could choose a spell to the other laptop models

  For example: [value added package for Win 7 32 bit v1.6.0023.320204 | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 312 & selProduct = null & selSh ortMod = null & language = 16 & selOS = 29 & selType = all & yearu pload = & monthupload = & dayupload = & useDate = null & mode = a llMachines & search = & action = search & macId = & country = al l & selectedLanguage = 16 & type = all & page = 27 & FROM = window s7 & ID = 87845 & DISO = 29 & driverLanguage = 42]

• FN F6 and F7 for less bright and shiny LCD will not work with XP on A305-S6845

  modules common to xp... not on this model...

  added value for xp... not on this model...

  FN F6 and F7 for less bright and shiny LCD will not work with XP on A305-S6845

  C2D t8100, chipset intel, no normal fn keys FN + F5 doesn't seem to operate 'naturally', as do some others that I don't use, but the idea that I spent 8 hours to find all the xp drivers for this thing and can NOT dim my lcd...! ******ed...!!!

  The Toshiba REAL will raise your hand... Please?

  you KNOW millions are without downgrading from vista to xp, GIVE US THE DRIVERS...!

  I had to just to get the rest, scout intel boooted to viata while just to get the wifi, then start on xp, install the wifi, then had to get drivermax (amazing) to find all the drivers

  but no one knows where the FN drivers (no pun intended...)!

  None of the drivers Vista FN will get them to work with XP

  XP drivers for other models will not be installed on this model

  It comes from * ed

  1200 for a machine that cannot dim the lcd...!

  It is unlinke toshiba, how long could possibly take something for xp on to the A305 recompile!

  If someone has an A305 with c2d, get drivermax, they have now all other drivers of my job of paving 99.999% perfect...

  I will also publish on 4shared.com in a massive zip...

  Ok

  Send me a fix...!

  (too late for a refund...!)

  TOSHIBA! everything I own is TOSHIBA... !!! three laptops from toshiba... just give my xp for my A305 drivers...!

  If you come from the United States, I'm afraid, you're on the wrong place. Try to post the same thing on http://community.compuserve.com/n/pfx/forum.aspx?webtag=ws-laptop&redirCnt=1 it's US forum.

  Here are mostly from Europe and Toshiba Europe has nothing to do with Toshiba WE. The company, but may be different marketing strategy and support.
  Maybe you'll find people with the same opinion.

  > 1200 for a machine that cannot dim the lcd...!
  I take you seriously with your opinion, but after reading this, I think that this comment has nothing to do with reality. Recovery of installation image and you'll have the complete functionality for laptop. You have the stick of Windows Vista on your laptop?

• Satellite A300D-15B PSAKCE - cannot install the audio driver for Win XP 64 bit

  Hi all

  This is my first post here after hidden during the last week or so, my hope is that somewhere it helps and hope so!

  I have a wonderful Toshiba A300D-15B PSAKCE with RAM 4 GB/O, but I suffer from some problems RESEARCH Holy function cannot resolve. I use this laptop as a box of development for uni/work unfortunately...

  After a complete nightmare and Vista32, Vista64, I decided to go back to windows XP32, however this custom install, continues to claim a failure of a CRC file after (and Yes, that's with SATA in IDE mode and a disc of XPSP2)

  I decided that I really DON'T want to goback to Vista, so installed Windows XP64. Now the first installation is very easy, I have the basic configuration, the chipset, graphic, network, CPU, usb, fine... except basic... and that's where I lost most of my hair... SOUND!

  First try to install the results of the pilot of his failure, claiming the mmdriver.inf cannot be found or corrupted, obviously I checked, and yes there it is, downloaded pleasure the MMDRIVER. INF and placed it system32 and the installation always fails.

  I also tried a "manual installation", in .inf files... which includes pilots XP32/64 and Vista 32/64 bit drivers, still the same
  problem, the driver continues to not install. I am going bald. Exceptional drivers who moved there

  * - Audio device on High Audio Defninition Bus *.
  * - Mass Storage Controller *.
  * - Modem Device on High Audio Defninition Bus *.
  * - USB device *.

  If what follows is any help, (Sandra 2008)

  * - Disk controller *.
  (AMD (ATI) SB700 SATA Controller [IDE Mode])

  * - Disk controller *.
  (Toshiba SB700 IDE)

  * - Audio device *.
  (Toshiba IXP High Definition Audio Controller)

  * - Audio Codec *.
  (Conexant Systems 5051 hours)

  * - Audio device *.
  (AMD (ATI) [Radeon HD 3600 Series] RV635 Audio device

  Now, as I write this, I heard the rumor that the A305D uses the same
  audio/graphics drivers... Well well... off to try something I guess...

  If there is no help or ideas, I'd appreciate it.

  Hello

  The laptop seems to use the Conexant audio chip. So, you will need the right sound driver for Win XP 64 bit.
  Unfortunately, the European driver Toshiba page provides the drivers for Win XP but I don't know if the pilots would cover the OS 64 bit as well m.

  Anyway, what you need to know, is that you will need to first install the patches Ms.
  The fix KB835221 and KB888111MS must be installed before installing the audio driver.
  If you have tried to install the driver, then remove it from the Device Manager and update Windows XP first!

  AFAIK that SP3 already contains these patches then perhaps you should install SP3 first before starting with the installation of the audio driver.

• Satellite L300-01:00 - touchpad driver for Win 7 64 bit necessary

  Hello

  I can't find the above mentioned driver for win7 64 bit.
  Touchpad had worked normally, with a Win7 driver and after a msg of error just stopped working (I can't scroll with the touchpad).

  Enyone have model L300 with 64 bit OS or know model that have the same touchpad driver for win7 64 bit on support downloads?

  Help, please...

  Hello

  Touchpad driver is not in the laptop model.
  You can choose the touchpad drivers released for other series of satellites as well.
  I can recommend the Satellite L500. There you can download the Synaptics and Alps touchpad driver. Both are released for Win 7 64 bit.

  Please note that scrolling touchpad can be changed/turned on in the control panel-> mouse-> device settings.

  I think it must be enabled.

• display driver for win 7 32 bit

  Hi Please give me link for id PCI\VEN_1002 & DEV_6840 & SUBSYS_1842103C & REV_00 win 7 32bit.my display driver laptop is hp Pavilion g7

  I mean if your laptop is the AMD/Intel switchable graphics, there's no W7 32-bit driver for this configuration.

  The 64-bit driver will not work on a 32-bit system.

  You must install Windows 7 x 64 bit if you want to run W7 on a laptop with the graphical configuration above.

  AMD/Intel did not write a 32-bit video driver for the GPU configuration,.

• Drivers for Win 7 64 bit HP 2000 2b43dx

  Help someone can give me a link to complete drivers for win 7 64 bit for my HP 2000 2b43dx

  I changed my OS because im not really into victory 8 and my laptop feels a little laggy, so I decided to change it.

  I have the drivers for the network adapters, but there are missing drivers

  Another device

  PCI device

  SM Bus controller

  Thanks in advance

  You are the very welcome.

  This is the latest driver Atheros WLAN that I could find for the adapter in your laptop.

  Give it a try and see if that helps.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5229455&prodNameId=5229457&swEnvOID=4058&swLang=13&taskId=135&swItem=ob-123191-1&mode=3

• The administrator password for all computers on the network does not work for ONE of the computers on the network

  original title: the computers of network/administrator password

  The administrator password for all computers on the network does not work for ONE of the computers on the network. I need to log on as an administrator to install software, but the password does not work. It works on other computers, but not this one. How is this possible and how can it be solved?

  Hello
  Microsoft technical support engineers cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features. For more information about this policy, please refer to the below sticky

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd

• Photosmart D5460 driver for win 7 64 bit moved

  Photosmart D5460 driver for win 7 64 bit moved

  I tried to install this printer on windows 7 Home premium 64 - bit operating system with all the updates.

  So today I went on my drive spare and installed the operating system of windows 7 professional 64-bit. I turned off immediately automatic updates, then I was able to install the printer.

  I don't know about you, but my guess is that it has something to do with all these updates.

  I really appreciate your help, many thanks!

• Get "key to upgrade is for the edition of windows that does not work with Windows Anytime Upgrade"

  The PC is running Windows 7 Starter.  I'm trying to upgrade to Windows 7 Professional. I bought the card from Windows Anytime Upgrade Key.

  When I entered the PK, error, "put key in level is for the edition of windows that does not work with Windows Anytime Upgrade"

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  If Anytime Upgrade still does not work:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
   
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

  Additional resources:

  http://answers.Microsoft.com/en-us/Windows/wiki/Windows_7-windows_install/how-to-successfully-do-and-troubleshoot-Windows/47e1943f-8255-452A-a7ad-2ae14dc974af