Exception when starting

Similar Questions

• Manage data source except when starting server in weblogic

  Hello

  I have weblogic 10.3.6, and I set datasource and deploy the application, the problem is when the datasource will not connect to the database, for example if the weblogic Server DB will be status "ADMIN" rather that "RUN", how do I manipulate datasource exception when start weblogic server

  Thank you

  OK, try this:

  'Set the InitialCapacity from the DataSource to 0 (zero) so that weblogic will not try to create any object of JDBC connection initially towards up so time like this that we can avoid the connection failed to create the conditions and prevent any movement of our State of the ADMIN server'

  WebLogic Server is in the ADMIN? "Middleware Magic."

  Kind regards

  White

• Exception when starting Server EMGC_OMS1 (updated 12.1.0.2)

  Hello
  
  I just upgraded my EM 12 c R1 to R2 test environment.
  The environment runs on Windows: Server Admin and monitor targets.
  
  After the steps after installation in the migration guide, Weblogic console starts well (using % DOMAIN_HOME%\startWebLogic.cmd), but I'm having trouble to start Enterprise Manager Cloud Control console/web server.
  
  After trying to start the EMGC_OMS1 managed server in WebLogic console, I get the following:
  
  -EMGC_OMS1 State goes to FAILED_NOT_RESTARTABLE.
  -The Server Admin log show the following errors:
  

  14:33:05EMReposLoginModuleImpl 28-Sep-2012: throw LoginException: authentication failed: User. Password not supplied
  < 28 sep 2012 14:33:05 CEST > < WARNING > < DeploymentService > < BEA-290014 > < username or password. >
  14:33:07EMReposLoginModuleImpl 28-Sep-2012: throw LoginException: authentication failed: User. Password not supplied
  < 28 sep 2012 14:33:07 CEST > < error > < Configuration Management > < BEA-150035 > < an attempt was made to download the configuration for > EMGC_OMS1 server by the user with an invalid password. >
  < 28 sep 2012 14:33:13 CEST > < error > < NodeManager > < BEA-300048 > < could not start the server EMGC_OMS1: Exception when starting Server > "EMGC_OMS1" >

  I tried the following:
  
  -Write file boot.properties in %DOMAIN_HOME%\servers\EMGC_ADMINSERVER\security and %DOMAIN_HOME%\servers\EMGC_OMS1\security with the credentials for the user the Weblogic admin again.
  -Value username and password on "Parameters of EMGC_OMS1" > Configuration > Weblogic Console tab to start the server.
  
  None of them succeeded.
  
  I also compared the former (R1) installation folder with a new one for the R2, but I don't see any relevant difference.
  
  You have suggestions on what can be wrong?
  
  Thanks in advance,
  Angel

  Hi Angel,

  Please see the following doc for instructions on starting a CMS.

  http://docs.Oracle.com/CD/E24628_01/doc.121/e24473/emctl.htm#BABFEEAJ

  Kind regards
  -Loc

• PowerShell does not open, Powershell ISE throws the exception when starting

  I am running Windows 7 SP1.

  When I try to start Powershell (x 64) or Powershell window will appear for less than a second, and then disappear.

  When I try to start Powershell ISE (x 64) I get an error on the application of "the exception unknown software exception (0xe0434352) occurred in the application at location 0x7568c44d."

  When I try to start Powershell ISE I get an error on the application of "the exception unknown software exception (0xe0434352) occurred in the application at location 0xfd96adad."

  I tried to repair .net 4.5 and I tried to reinstall Windows6. 1 KB2506143-x 64.msu.

  When you try to install KB2506143-x 64.msu I get "the update is not applicable to your computer."

  When trying to make sure that the old powershell is uninstalled I can't find KB2506143 in the list of installed updates.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home
  http://social.msdn.Microsoft.com/forums/en-us/home

• Nullpoint exception when start JDeveloper 12.1.3 with SOA suite

  One met the exceptions below then start JDeveloper 12.1.3 with SOA suite? This led to I can not save the workspace, very bad.

  JDeveloper version: Build JDEVADF_12.1.3.0.0_GENERIC_140521.1008.S

  Version of the JDK: java version "1.7.0_80".

  trace of the stack as below:

  SEVERE:

  javax.naming.NamingException [Root exception is java.lang.NullPointerException]

  	at oracle.adf.share.jndi.ContextImpl.throwNamingException(ContextImpl.java:671)
  	at oracle.adf.share.jndi.ContextImpl.saveDocument(ContextImpl.java:968)
  	at oracle.adf.share.jndi.ContextImpl.save(ContextImpl.java:986)
  	at oracle.adf.share.dt.ConnectionNsChangeListener.refreshInternal(ConnectionNsChangeListener.java:242)
  	at oracle.adf.share.dt.ConnectionNsChangeListener.refresh(ConnectionNsChangeListener.java:180)
  	at oracle.adf.share.dt.ConnectionNsChangeListener.objectAdded(ConnectionNsChangeListener.java:43)
  	...
  	at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:138)
  	at java.awt.EventDispatchThread.run(EventDispatchThread.java:91)

  Caused by: java.lang.NullPointerException

  	at oracle.jdevimpl.jps.JpsConfigUtilsImpl.getDefaultJpsContext(JpsConfigUtilsImpl.java:722)
  	at oracle.jdevimpl.jps.JpsConfigUtilsImpl.getCredentialStoreLocation(JpsConfigUtilsImpl.java:1407)
  	at oracle.adf.share.dt.security.providers.jps.CSFDTCredentialStore.checkInitCSFStore(CSFDTCredentialStore.java:333)
  	at oracle.adf.share.dt.security.providers.jps.CSFDTCredentialStore.fetchCredential(CSFDTCredentialStore.java:588)
  	at oracle.adf.share.dt.security.providers.jps.CSFDTCredentialStore.fetchCredential(CSFDTCredentialStore.java:578)
  	at oracle.adf.share.security.credentialstore.CredentialStore.fetchCredential(CredentialStore.java:187)
  	at oracle.adf.share.jndi.CredentialStoreHelper.fetchCredential(CredentialStoreHelper.java:104)
  	at oracle.adf.share.jndi.ReferenceStoreHelper.saveCredentialsInternal(ReferenceStoreHelper.java:520)
  	at oracle.adf.share.jndi.ReferenceStoreHelper.saveCredentials(ReferenceStoreHelper.java:476)
  	at oracle.adf.share.jndi.ContextImpl.saveDocument(ContextImpl.java:957)
  	... more than 123

  Thanks guys,.

  finally found the problem, one that has created this app, forgot to add 3 files below to Git, after that I added these files, the problem disappeared.

  and I also applied the paths that you mentioned.

  src/META-INF/cwallet.sso

  src/META-INF/cwallet.sso.lck

  src/META-INF/jps-config.xml

  the sit of the guy in front of me has me a bar of chocolate.

  Thanks for the reply.

• PowerCLI 5.8 Release 1 throws an exception when starting

  So I decided to upgrade my PowerCLI 5.5 R2 Patch 1 to the latest 5.8, released the last week or two. (Yes, I know, I guess I decided to live dangerously, using new versions :-)))  And the upgrade installation went well. But when I run PowerCLI, I get:

  Add-PSSnapin: the initializer for type for 'VMware.VimAutomation.Storage.Interop.V1.Service.StorageServiceFactory' threw an exception.

  C:\Program Files\VMware\Infrastructure\vSphere PowerCLI\Scripts\Initialize-PowerCLIEnvironment.ps1:48 tank: 10

  + Add-PSSnapin $snapin

  +          ~~~~~~~~~~~~~~~~~~~~

  + CategoryInfo: NotSpecified: (:)) [Add-PSSnapin], TypeInitializationException)

  + FullyQualifiedErrorId: System.TypeInitializationException, Microsoft.PowerShell.Commands.AddPSSnapinCommand

  Someone knows why? I didn't update the vSphere CLI, just PowerCLI. I was still able to connect to my vCenter (I connect to my vCenter in my profile). But I don't know what will not work. I did a quick 'Get-VMHost', "Get - VM" and a few others - they are all working well.

  Value name

  ----                           -----

  PSVersion 4.0

  WSManStackVersion 3.0

  SerializationVersion 1.1.0.1

  CLRVersion 4.0.30319.18444

  BuildVersion 6.3.9600.16406

  PSCompatibleVersions {1.0, 2.0, 3.0, 4.0}

  PSRemotingProtocolVersion 2.2

  PowerCLI Version

  ----------------

  VMware vSphere PowerCLI 5.8 Release 1 build 2057893

  ---------------

  Versions of the snap

  ---------------

  VMWare AutoDeploy PowerCLI component 5.5 build 1983942

  VMWare ImageBuilder PowerCLI component 5.5 build 1983942

  License of VMware PowerCLI component 5.5 build 1265954

  VMware Storage PowerCLI component 5.8 build 2057894

  VMware PowerCLI VDS component 5.8 build 2031581

  VMware vSphere PowerCLI component 5.8 build 2031581

  VSphere VMware Update Manager PowerCLI 5.1 build 782803

  Ideas, anyone? Should I roll back to 5.5? Anyone else having problems?

  An update. We have improved our environment to 5.5 (all ESXi hosts and vCenter). Therefore, I improved my heavy client installation. So I decided to try again after update my Powershell to 5.8.

  And then everything just worked. No error at startup of Powershell. All respond as it should.

  Can't imagine why the 2 would be connected, but no matter, I am now under 5.8 on my Windows 7 workstation.

• Why my dosent ml 3706 gateway laptop screen wants to turn on when started taking 3 or 4 times

  Why my gateway computer ml3706 laptop screen dosnt want to turn on when start takes 3 or 4 times to light

  Hello

   
  You have made any changes to your computer recently?
   
   
  I suggest you to follow the steps and check if it helps.
   
   
  Method 1: Disconnect all external devices except the mouse and check if that helps.
   
   
  Method 2: Start on your desktop and follow the steps in the link and check if that helps.
  Troubleshoot monitor and video card

   

   

  This could be a hardware problem, you can contact the laptop manufacturer support and check if it helps.

  http://support.gateway.com/support/ask_gateway.aspx?cmpid=supportnav

   

• Window 7 running slow except when the mouse moves

  I installed Windows 7 on a Dell Optiplex 960, 3 GHz Dual core. It has an ATI Radeon video card and I have installed the latest driver for it.

  Problem: the video is very slow, except when I move the mouse. Also, the clock does not keep time. Windows make it very slowly.

  Have you installed all the drivers from the Dell site? I uninstall the video drivers that you have if you have AMD directly and use the Dell ones.

  http://support.Dell.com/support/downloads/DriversList.aspx?c=us&l=en&s=Gen&ServiceTag=&SystemID=PLX_960&OS=WLH&OSL=en&CATID=&impid=

  You want to install any drivers of Dell, starting with the chipset. Win7 32 and 64-bit are supported. MS - MVP - Elephant Boy computers - don't panic!

• I get a message from DLL run when starting my laptop with Windows 7

  I get a message from DLL run when starting my laptop with Windows 7.  One of the messages is: c:\users\xxx\AppData\Local\fgpise.dll. How can I get rid of these messages? McAfee has detected two Trojan horses and withdrawn earlier today. He says that my system is clean now. Did that cause this problem?

  Hello

  Do not assume that any malware has been removed.

  This is probably the result of malware then do a very thorough check and when the system
  is clean see the following message to remove this error.

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
  It will display all the infections in the report after you run - if it will not run changed the name of
  TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
  check with the other methods below.
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/products/malwarebytes_free

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  -----------------------------------

  Original version is now replaced by the Microsoft Safety Scanner
  http://OneCare.live.com/site/en-us/default.htm

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  ----------------------------------

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  After the removal of malicious programs:

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  ======================================

  If necessary AFTER THAT you are sure that the machine is clean of any malware.

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• "boot configuration data store could not be opened" when starting bcdedit.

  "boot configuration data store could not be opened" when starting bcdedit. Boot config-dual PREV XP Pro x 64 1st disk; XP Pro 32 on the 2nd disk.  Nuked 1st disk and installed Win 7.  It seems that Windows 7 has not identified the 2nd OS because it wasn't on a partition on the same drive?  All I can find is info on editing an existing data store. I don't see any information on how to create one from scratch, except there is a Create option and the different option, but not how to decide what the values should be. Any help is greatly appreciated.

  Boot from the installation DVD and run Recovery menu. Command prompt.

  bcdedit/export C:\BCD_Backup
  c:
  Boot CD
  BCD attrib s h - r
  Ren c:\boot\bcd BCD.old

  Bootrec /RebuildBcd

  Messages rating helps other users

  Mark L. Ferguson MS - MVP

• Got a second AS exception when handling an exception AS?

  Hi Muse start-up I get the following message: got a second AS exception when handling an exception AS

  I already reinstalled muse en trashed the prefs, but that did not help, I'm on a mac of yosemite.

  Everyone knows about this problem?

  An update was released today, please try installing the latest update and then check.

  https://helpx.Adobe.com/Muse/release-note/Adobe-Muse-release-notes.html

  If still the same problem, then after the screenshot of the error with precision.

  Thank you

  Sanjit

• make exception when using BUlk collect

  Hi all
  
  version of DB 10 g
  
  I've written a procedure as below
  

  create or replace procedure test_proc2 is
  
  type v_emp_rec is record 
  (empno number,
  ename varchar2 (200));
  
  type v_emp_tab is table of v_emp_rec index by binary_integer;
  
  v_tab v_emp_tab;
  
  begin
  
  select empno,ename
  into v_tab(0)
  from emp
  where empno = 7369;
  
  dbms_output.put_line (v_tab(0).ename);
  
  exception 
  when no_data_found then
  dbms_output.put_line ('I am in no data found exception');
  end;

  now, I tried to perform the procedure below
  

  begin
  test_proc2;
  end;

  the foregoing is works well, but I want to use the functionality of collection in bulk so I use as below
  

  create or replace procedure test_proc2 is
  
  type v_emp_rec is record 
  (empno number,
  ename varchar2 (200));
  
  type v_emp_tab is table of v_emp_rec index by binary_integer;
  
  v_tab v_emp_tab;
  
  begin
  
  select empno,ename bulk collect
  into v_tab
  from emp
  where empno = 7369;
  
  dbms_output.put_line (v_tab(0).ename);
  
  exception 
  when no_data_found then
  dbms_output.put_line ('I am in no data found exception');
  end;

  the foregoing gives me exception, please someone can explain why it is not in the exception block.
  
  Thanks in advance.

  The obvious answer is because an exception no_data_found is raised.
  The question is there.

  It's either select it because there is no data where empno = 7369.

  Or is the .ename of v_tab (0), because there is no element 0. Automatic collection of indexing starts at 1.

  for example

  SQL>  declare
    2    type t1 is table of pls_integer index by pls_integer;
    3    v1 t1;
    4   begin
    5    v1(1) := 1;
    6    dbms_output.put_line(v1(0));
    7   end;
    8  /
   declare
  *
  ERROR at line 1:
  ORA-01403: no data found
  ORA-06512: at line 6
  
  SQL> 
  

  If you catch the exceptions and do not spread them properly, then hide you all information kind of useful as a line number, etc..

• error message seen when starting a managed server (dsp_config.ear)

  Hello
  
  I have problems when I start the managed server by the server administrator.
  
  Seems that when I cancel the deployment dsp_config.ear the managed server seems to start without any problems.
  
  But since the dsp_config.ear is removed from the dspconsole is messed up.
  
  The server administrator works fine without any problems with or without deployment of dsp_config.ear.
  
  The trace of the error
  
  # < 27 July 2009 15:36:01 CEST > < WARNING > < DeploymentService > < wdcsn383a > < cashflow1MS1 > < ExecuteThread [ASSET]: '1' for the queue: ' (weblogic.kernel.Default)
  self-adjust)' > < < WLS Kernel > > <><>< 1248701761543 > < BEA-290064 > < deployment servlet service encountered an Exception When you handle the deployment service m
  message for id of the request '-1' from the server 'BEAAdminServer '. Exception: "java.lang.ClassNotFoundException: com.bea.wli.config.deployment.server.ServerVersion:
  This error can indicate that a component has been deployed to a cluster member but no other members of this group. Ensure that any component deployed o
  n a server that is part of a cluster is also deployed on all other members of this group
  at weblogic.j2ee.ApplicationManager.loadClass(ApplicationManager.java:218)
  at weblogic.j2ee.ApplicationManager.loadClass(ApplicationManager.java:85)
  at weblogic.common.internal.WLObjectInputStream.resolveClass(WLObjectInputStream.java:61)
  at java.io.ObjectInputStream.readNonProxyDesc(ObjectInputStream.java:1575)
  at java.io.ObjectInputStream.readClassDesc(ObjectInputStream.java:1496)
  at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1732)
  at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1329)
  at java.io.ObjectInputStream.readObject(ObjectInputStream.java:351)
  at java.util.HashMap.readObject(HashMap.java:1030)
  at sun.reflect.GeneratedMethodAccessor1.invoke (unknown Source)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:597)
  at java.io.ObjectStreamClass.invokeReadObject(ObjectStreamClass.java:974)
  at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1849)
  at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1753)
  at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1329)
  at java.io.ObjectInputStream.defaultReadFields(ObjectInputStream.java:1947)
  at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1871)
  at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1753)
  at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1329)
  at java.io.ObjectInputStream.readObject(ObjectInputStream.java:351)
  at weblogic.deploy.service.internal.DomainVersion.readExternal(DomainVersion.java:180)
  at java.io.ObjectInputStream.readExternalData(ObjectInputStream.java:1792)
  at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1751)
  at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1329)
  at java.io.ObjectInputStream.readObject(ObjectInputStream.java:351)
  at weblogic.deploy.service.internal.transport.DeploymentServiceMessage.readMessage(DeploymentServiceMessage.java:325)
  at weblogic.deploy.service.internal.transport.DeploymentServiceMessage.readExternal(DeploymentServiceMessage.java:301)
  at java.io.ObjectInputStream.readExternalData(ObjectInputStream.java:1792)
  at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1751)
  at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1329)
  at java.io.ObjectInputStream.readObject(ObjectInputStream.java:351)
  at weblogic.deploy.service.internal.transport.http.DeploymentServiceServlet.handleDeploymentServiceMessage(DeploymentServiceServlet.java:618)
  at weblogic.deploy.service.internal.transport.http.DeploymentServiceServlet.internalDoPost(DeploymentServiceServlet.java:235)
  to weblogic.deploy.service.internal.transport.http.DeploymentServiceServlet.access$ 000 (DeploymentServiceServlet.java:77)
  to weblogic.deploy.service.internal.transport.http.DeploymentServiceServlet$ 1.run(DeploymentServiceServlet.java:210)
  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
  at weblogic.security.service.SecurityManager.runAs (unknown Source)
  at weblogic.deploy.service.internal.transport.http.DeploymentServiceServlet.doPost(DeploymentServiceServlet.java:207)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
  
  
  Can someone help me on this one?
  
  It seems more ODSI problem than the problem of weblogic server.

  Looks like you deploy dsp_config.ear on a domain/server that is not activated ODSI.

  com.bea.wli.config.deployment.server.ServerVersion is in /com.bea.common.configfwk.wlinterop_10.3.0.0.jar that is referenced by /features/odsi.server.modules_10.3.0.0.xml and used by com.bea.dsp.management.impl.DomainServiceImpl

• When starting my pc, how can I get Firefox to open automatically?

  When starting my pc, I want that Firefox opens automatically to my homepage without intervention from me. Is this possible?
  XP Professional. SP3.

  Waka, thanks. I chose your solution and it worked.

• help with tabs, I've reset but does not solve problem when started

  When started the new tab is blank and does not show the previous 9 pages as before. I went to help troubleshooting and then reset Firefox. It works until I closed Firefox well when I start a new session new tabs are white again.
  Help, please.

  The icon of the grid 3 x 3 is on the page of the tab itself (screen attached). Simply, that shows and hides the thumbnails. In fact, I now empty placeholders. It erases the images?

  Anyway, if you have the about: newtab about: config, but you do not have the subject: newtab page when you press Ctrl + t, the problem is usually an extension. You can review what you have and configure or disable here:

  Firefox orange (or the Tools menu) button > addons > Extensions category