Why my dosent ml 3706 gateway laptop screen wants to turn on when started taking 3 or 4 times

Similar Questions

• IPhone 5 s screen does not turn off when it is plugged in to the charger.

  Hi all

  I use Iphone 5s from the last 4 months. Recently I came across this situation. Sometimes I see screen only turns off when its plugged into the charger. After a few hours of mobile will be turned off. Sometimes I manually press the power button to turn off the screen.

  Please let me know how to solve the problem.

  Kind regards

  Manju!

  Hello there, Manjunath K P!

  Thank you for joining the communities Support from Apple! Looks like you're having a problem getting the phone to automatic locking. I know that I want my iPhone did not stay when over and have the screen lock correctly. You can, of course, that your Auto-Lock is set up correctly. Your range of choice of automatic locking from 30 seconds to 5 minutes before locking the screen, or you can choose never so that it does not lock. To change the settings, tap the settings icon, click the general button. Tap the AutoLock option and choose your preference.

  If these steps do not work, and you still do not see the iPhone Autolock when you're in charge, you can go to settings > general > reset and then press reset all settings. This removes all the data. For example, if you have 16GB of music, videos and photos, this option will not remove. What this does is actually reset some of your settings to factory default. It is not a complete withdrawal of the parameters. It deletes all of your preferences for Wi - Fi, Bluetooth, do not disturb, Notifications, general, sounds, brightness & wallpaper and privacy.

  Once that is done, go ahead and try to set the automatic lock again and see if it works.

  See you soon!

• Laptop sleep/wake extended/turn off when I invite to screen goes all black

  So im havin a bit of trouble with my laptop. I disappeared for a month and so did not use my laptop during this period. When I got home and started using it, I encountered some problems. It was pretty slow, often freezing etc. So I made sure that I installed updates for my system while he was aware, ran for registry cleaning also programs.  She improved after that, but I sometimes encountered the following problem. When I invite my laptop to go into sleep/hibernation / stop all that happens is the screen goes black/towers, but the system is still running and wont turn off. Otherwise when I open my laptop from sleep/hibernation it starts, but all I get is a black screen, resulting in me having to manually close the system using the power switch. Else have this problem or know what's happening? Thanks for the help in advance.

  On my, 29 Sep 2014 21:51:23 + 0000, Conor_McG wrote:

  So im havin a bit of trouble with my laptop. I disappeared for a month and so did not use my laptop during this period.

  We are direct opposites. I only use my laptop when I travel away from
  Homepage.

  When I got home and started using it, I encountered some problems. It was pretty slow, often freezing etc. So I made sure that I installed updates for my system while he was aware, ran for registry cleaning also programs.

  Ugh! Registry cleaning programs are all snake oil. Cleaning of the
  registration is not necessary and is dangerous. Let alone register and
  do not use any registry cleaner. Despite what many people think, and
  What software record cleaning suppliers are trying to convince you,
  have unused registry entries is not really make you hurt.

  The risk of a serious problem caused by a registry cleaner by mistake
  delete an entry you need is much greater than any potential benefit
  It can have.

  Read
  http://www.howtogeek.com/171633/why-using-a-registry-cleaner-wont-speed-up-your-PC-or-fix-crashes/
  and also
  http://blogs.technet.com/markrussinovich/Archive/2005/10/02/registry-junk-a-Windows-fact-of-life.aspx

  You can also read the section on the registry of CCleaner
  Here cleaning product:
  http://www.howtogeek.com/113382/how-to-use-CCleaner-like-a-Pro-9-tips-tricks/

  Let me stress that neither me nor anyone else who warns the
  use of registry cleaners never said that they always cause
  problems. If they have always caused problems, they would disappear from
  the market almost immediately. Many people have used a registry
  cleaner and never had a problem with it.

  The problem with a registry cleaner is that it carries with it
  the risk of a significant problem. And since there is no
  benefits of using a registry cleaner, running that risk is a very bad
  good deal.

• White screen while laptop is running so close cover when starting

  Whenever I close the lid right after turning on my HP DV6 want, and when I opened the lid, the screen remains blank. The system does not appear to be a 'sleep' mode because the lights of buttons and buttons are turned on and off. The sound can also be heard. But the screen remains blank. I have to force restart it. But if I leave the lid open when you turn on the machine, it works fine.

  How can I solve this?

  N ° never do this if you want a laptop to run reliably. It wouldn't matter if it's a laptop Apple or Linux computer. The same thing applies.

  Closing the lid after booting and logging in the windows are OK, but not during the start or stop.

  Torture test fragile devices is not a good idea unless do you for a living or have unlimited resources.

• How can I turn off laptop screen HP Pavilion G7t-1200 when connected to an external monitor?

  I have my laptop connected to an external monitor that is bigger.  How can I turn off laptop monitor?

  Hello

  Press f4 (on some computers laptops fn + f4), use the arrow keys to select the 2nd poster only, and then press ENTER.

  Kind regards

  DP - K

• black screen for 3.5 hours when starting

  Hello guys and girls I need you all to help the guard it's frustrating me

  , I bought a lenovo c200 series all-in-one whenever I start the pc, before it actually go to the desktop there will be a black screen, it lasted exactly three hours and a half (3.30), but there is a message saying IMAGE SETUP: AUTOMIC OPTIMIZATION IMAGE PLEASE PATIENTER (can someone please answer for why this is happening thanks in advance)

  If I were in your shoes, I could talk with the seller support staff.

• CS5-screen work area turns black when cropping?

  I use Windows 7 and CS5.  When I try and crop a photo, the work area will become black.  Here's a clip of screen what I see.  I then cancel cropping and will sometimes return to the tool move, click the picture, black screen will return.  Suggestions or ideas why and what to do?

  

  It's a problem of display driver.

  Have you installed the 12.0.1 update for Photoshop?

  Have you recently updated your display drivers?

  Have you tried to disable OpenGL drawing in Photoshop preferences (to temporarily work around this problem)?

• Laptop shuts off and turns on when I close the lid

  Hi, I just bought a HP Pavilion 15-n253sv and I noticed that when I close the lid its turns off instead of getting in standby mode. Also when I stopped it, and then I close the lid it lights up. Its like the on off button. Is it a hardware problem that I must return the laptop? I checked out the settings and it is said that when the lid is closed it just goes to the standby mode. I have win 8.1.

  Hi Biliou,

  Welcome to the Forums of HP Support!

  If I understand you correctly, your computer shuts down when you close the lid, and if it is turned off and you close the lid it lights.  I think you are right to think it's a hardware problem. You can contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click on the link to get help from your region number. Contact HP worldwide

  I hope that this helps, please let me know how it goes.

  Thank you and have a great day!

• Blue screen of death! Will not start at all. Every time, it's a different error.

  Several times, I get the BSOD. Whenever it happens that there are various STOP codes and errors. I haven't added a new hardware or software on this computer. Just performed an automatic update Micrdosoft and restarted on its own and the BSOD appeared. I rebooted several times and get the BSOD every time. I can't get the system to boot at all. He's coming to my office for about 30 seconds, then BSOD!  I tried starting my CD-ROM and using the last configuration that worked but I still get BSOD! Here are some of the things that I got:

  STOP: 0x0000008E (0xC0000005, 0xAE29D527, Ox00000000) SSMEVENT. SYS-address AE29D527 base at AE288000, time stamp 4f1DAD9c

  FltMgr.sys PAGE_FAULT_IN_NONPAGED_AREA B9E4CA23 base at B9E4C000 datestamp 480251da

  Still, whenever I restart I get all the new info! Help, please!

  Karen

  Hello

  See the following steps and check:

  Step 1:
  

  What to do if Windows does not start correctly

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed. System Restore helps you restore system files from your computer to an earlier point in time.

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

  Note: Trying to back up all important data before you perform a custom or clean installation

  Step 2:

  How to fix a blue screen stop errors that cause Windows Vista to shut down or restart unexpectedly

  http://support.Microsoft.com/kb/958233

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  Note: Trying to back up all important data before you perform a custom or clean installation

  Hope this information helps.

• How can I stop my laptop automatically update and turn off when im using, I want to do after ive and turn off?

  I want to shut down the computer to close until the update when im in the middle of using it, how can I updated it when I choose to disconnect?

  I want to shut down the computer to close until the update when im in the middle of using it, how can I updated it when I choose to disconnect?

  Why don't you go to the MANUAL update?
  You will receive notification when there are updates available, and you can run the installation, whenever you are ready.

  Start > in the search box, type windows update > Enter > left column, change the settings...

• Firefox shows a black screen suddenly during navigation, or when left idle for a long time (more than 1 hour).

  Firefox becomes suddenly totally black, while I was watching yesterday. I tried to reboot, and it works very well. In this State, no menu or actions items are available. Even by closing the browser, I get the confirmation popup, which is also entirely black.

  Screenshot link: http://prntscr.com/55kggq

  I had to chance, click on the button "close tabs".

  I use Mozilla Firefox v33.1 in Windows 7, OS 32-bit with processor i3, 4 GB of RAM.

  If you have any problems with the current versions of Shockwave Flash plugin then check this:

  • see if there are updates for your graphics card disk drivers

  https://support.Mozilla.org/KB/upgrade-graphics-drivers-use-hardware-acceleration

  • Disable protected mode in the plugin Flash (Flash 11.3 + on Windows Vista and later versions)

  https://forums.Adobe.com/message/4468493#TemporaryWorkaround

  • turn off hardware acceleration in the Flash plugin

  https://forums.Adobe.com/thread/891337
  See also:

  • http://KB.mozillazine.org/Flash#troubleshooting

• Why using Mozilla to enter a web site is my password rejected when he worked for a long time. PASSWORD is corerect

  Years my password work when you use MOZILLA by accessing the web site XPRESSBET. Now
  my password is rejected, but it works with other browsers such as Google Chrome or Internet Explorer.

  Many issues of the site can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.
  Note: This will be you temporarily disconnect all sites, you're connected to.
  To clear the cache and cookies to do the following:

  1. Go to Firefox > history > clear recent history or (if no Firefox button is displayed) go to tools > clear recent history.
  2. Under "Time range to clear", select "all".
  3. Now, click the arrow next to details to toggle the active details list.
  4. In the list of details, see the Cache and Cookies and uncheck everything.
  5. Now click the clear now button.

  More information can be found in article to clear your cache, history, and other personal information in Firefox .

  This solve your problems? Please report to us!

• HP Pavilion e17 - 148 ca: [URGENT] need response on the laptop screen went blank question

  Hello there, this is the Prince of the heavenly Crown of Canada here.

  I've been a loyal user of HP consumer level laptop for 2 years.

  It seems that there is a problem with my laptop screen display.

  For my part, this is the first time this kind of problem has occurred.

  For some reason, in my current (well, now its my last) session, my screen became totally blank on me and turned black, as if the laptop was in a sort out of power status, however, the power of the laptop was always and until the issue has suddenly decided to occur before my eyes , I had been using the laptop and was even working on a coding operating... some of you may know me as the creator of the heavenly System.ini Crown Configuration file.

  Apparently, it is a known issue with HP Laptop, and I don't know if HP is actively focusing on the question of setting so that it does not become an inconvenience to other users of HP laptops or buyers.

  Is there a known solution as to how to fix this kind of problem? This is very critical and I was in the middle of the tent to save the rest of my code in Notepad on my desk, but I would speculate that asides from the 2 files I could save, the rest would have gone unless I would be able to resume my last session which I highly doubt at this stage.

  If someone could please let me know as soon as possible, I would appreciate it a lot.

  ~ CCPOC Benson Lam

  Hi there @BensonLam,
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, HP experts and other support staff. I understand that you have a problem with the black screen. I'll be happy to help you.

  Please report the number of complete product from your computer. Check out the following, if you need assistance with this information.
  How can I find my model number or product number?

  Here are a few documents to help.

  Black screen or white with a blinking cursor after entering the Windows password

  Computer starts but the screen stays white

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• Why the Satellite L300 laptop screen stays white?

  Why the Satellite L300 laptop screen stays white?

  Hello, I have a Toshiba Satellite L300-29U over purchase, turn when he was first an hour about it looks a whole without problems, then the screen was blank. Feed again in a couple of times more hours after rest and passes him still takes some time to operate.

  What is your recommendation?

  Thank you for your response.

  Post edited by: Sams

  Hello

  Why?
  Who knows what have you that your screen is white?
  My screen is not white it shows everything correctly.

  The same white screen will appear on the external monitor?
  If so, then this problem may be related to faulty graphics card, if no, your laptop computer s display can be defective

• Gateway vista laptop screen keeps going black several times!

  I need Urgent help please. I have Windows Vista Home Premium x 64 Service Pack 2 on a Gateway laptop with model number MD2614u. Whenever my charger is plugged into my laptop, and I'm trying to use my laptop, the screen goes very dark (you can always sort of see it, but its really dark able to work with the laptop). This happens immediately after that I open the lid of my laptop. In order to get rid of the darkness, I close the lid of the portable computer, reopen and instantly the screen goes black again. When I don't have my charger plugged in, this problem will not happen. I also tried the system restore, that does not solve the problem. I appreciate help guys, I really need my laptop works again. For any other information on the laptop required, please ask. Thank you! :)

  Hello draining12aol.com,

  I suggest that you update the drivers for the video card on your computer and check if you have the same problem. You can check the below article which will give you information on how to update the drivers:

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Check Event Viewer to see if there is not related to the failure of the system logs.

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer

  You can see the link which will help you analyze the entries below Event Viewer:

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

  Thank you
  Irfan H, Engineer Support Microsoft Answers