Exchange system user passwords

Similar Questions

• IBM think centre @ request for initialization of the system user password and a genius set the bios to lock keyboard can it is bypassed and how?

  Original title: IBM think centre @ start request.

  IBM think centre @ request for initialization of the system user password and a genius set the bios to lock keyboard can it is bypassed and how?

  Hi brandon1980,

  I recommend you contact your computer manufacturer for assistance. The manufacturer would be able to give details about the BIOS (Basic Input Output System) and find out if this feature can be disabled.

  Hope the helps of information.

• Satellite M70-129: user password controls access to the system at boot

  Hello

  1. from Toshiba Assist (password utility) I put the supervisor with string (text boards) owner password and then I put the user with chain owner password. But during startup BIOS only prompt you for the user password and his Rosary of owner. User mode many BIOS options are disable including the HW installation option.

  2. when I click on Toshiba HWSetup, he invites supervisor password. But if I get the supervisor (not 100% sure) password, it says invalid password. I also tried to change the Toshiba supervisor password, password help utility but failed.

  3. in the meantime due to virus attack, I had to reformat my laptop with Toshiba Recovery CD, sacrifice all my data. I bought this laptop in a few months.

  4. How can I completely remove the BIOS supervisor password and user. Help, please.

  Hello Anas

  You are right. If there is no possibility to remove the password, the service partner for this but it costs a bit.

  Otherwise I put t agree with you on the common problem on Satellite models, because it is a very serious thing and I really t think Toshiba may allow something like that to happen. If it's truth can you imagine what turbulence will be on the market, or perhaps to the press. I put t really believe in this theory.

• Satellite A100 is locked because of the fingerprint BIOS & user password

  Hi all

  I have my A100 to my work, recognition of the TouchChip fingerprint a year ago. On initial installation, I recorded my fingerprint of the windows interface.
  Six months ago I had to reinstall windows XP due to infection by the virus that is not repairable. I have installed Windows XP Home edition and downloaded all the drivers and additional software from Toshiba's site.

  I him didn't record again my fingerprints, and I have NOT activated the TouchChip software this time. My problem was only an annoying message at the time the sign that said «you have not saved your fingerprint again...» "and that's it.
  After a 2 week out of town trip (My A100 was locked in my office, and powered OFF - no connection to the sector) at first start, software TouchChip is back from the dead!

  Screen 'TouchChip Bios Extension' appeared after plugging, and my finger is required to load WXP!
  When connecting user WXP dialogue the additional message "you have not saved your fingerprint again... is always here, but I cannot start the machine without my fingerprint." After some digging later in PowerProtector (?) I found an option that says 'enable or disable the use of fingerprints for system and user password BIOS' or something like that.

  I turn this off, and the machine asked to reboot. It was the last time I saw the office.
  After reboot, the system asks password. BUT I DID NOT PUT ANY SYSTEM OR USER PASSWORD!
  Is this possible?
  I did something wrong?
  What is the solution?
  I'm locked out; I don't know why and how the BIOS is locked with a password (so I can't unlock it).
  Please someone help.

  Best regards, Georgios

  I don't know what exactly A100 computer laptop you have, but it seems that the laptop came with the Vista operating system preinstalled.

  You have installed XP and drivers XP only from the Toshiba page.
  But from my understanding, the BIOS should be updated too! The Satellite A100 series supports a special XP BIOS version. If the BIOS was not updated the laptop might not run correctly.

  I don't know if it could have a negative influence on the fingerprint, but nothing is impossible!
  However, the fact is that the BIOS asks for the password. If you don't know this, you need to remove the other... and this can be done by a service provider authorized in your country.

  Request assistance from technicians and explain the whole story! Maybe they will remove the password for free!

  Bye and good luck

• [T410] FDE - user password insufficient to erase disk (master required?)

  Hello community,

  before all sorry for my bad English skills. I have a problem with my drive hard-encryption:

  For about 1.5 years, I encrypted my hard drive with a user-password (FDE). Now, I plan to replace the hard drive and use the external old as a usb device. So I want to erase the entire disc + password. I tried the "Drive erase Utility" Lenovo, but it requires a master-password. I don't know it

  With my user password I can modify the BIOS settings, format the drive and reinstall a new operating system, I can even change the user password. But I can't remove the password / encryption.

  My question: is it possible to remove the password from the drive (FDE) only with the password? (Even if a password has been set?)

  Thank you

  Hello, roderwald.

  Pages 40 to 42 of your Hardware Maintenance Manual describe the passwords of the BIOS, including the differences between the master password and the user HARD drive.

  Further discussion is not allowed by Community rules:

  "No post includes instructions or directives intended to subvert security measures, including passwords, locking mechanisms, analysis of fingerprints, etc., or to circumvent security measures. All messages provides descriptions of the location, or direct links to the content associated with these topics. »

  I'm sorry, but I have to lock this thread.

• The new hard drive will interfere with user passwords?

  I replaced my hard drive on my Dell Inspiron (Windows Vista Home Basics).  The new drive will interfere with my user passwords?

  Mona

  Hello

  You do not say what user passwords you talk, after replacing the hard drive which will be then require you to reinstall the operating system

  If you refer to the online user passwords (Facebook, Twitter, etc.), they will remain the same.

  If you are referring to your Vista account permissions to access, with a new hard drive and you reinstall the operating system, you will need to put in place all the user accounts and passwords user again for them.

  See you soon.

• My computer can be unlocked if I forgot the user password and have not configured a password recovery disk

  I forgot my user password on my computer. I have not configured a password recovery disk. Can it be unlocked and how?

  I forgot my user password on my computer. I have not configured a password recovery disk. Can it be unlocked and how?

  See if this tutorial Microsoft Support will help:

  How to use system restore to log on Windows 7 or Windows Vista when you lose access to an account
  http://support.Microsoft.com/kb/940765
   
  If she does not she, MS Answers leave no one helping users to bypass the password protection... Regardless of the reasons.
  Here is the link to the policy:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

• I forgot my user password

  Hi, I got a computer hp compaq mini 110 that I haven't used for a long time and I forgot my user password anyone can help me or do I drop

  You need to call HP Support and demand for a set of recovery disks, then you can recover/restore your laptop at the earliest

  OR

  You need to call Microsoft and buy an operating system with the license key, so that you can recover/restore your laptop at the earliest

  I highly recommend you Contact HP Support by phone for assistance without delay

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  Although I am an employee of HP, I speak for myself and not for HP

• Pavilian dv7-6c95dx rejection of correct user password

  Pavilian dv7-6c95dx windows 7 64-bit (out of warranty).  Computer turns on normally and asks user password.  Attempts to enter the CORRECT password (I forgot it) for user access results in the following message: "user profile service service has no logon.  User profile cannot be loaded. "Then, I offer only an OK button.  Clicking OK only results in the whole of the procedure of starting all over again.  I get a "wrong password" notification when I fast type in a wrong password.  Of course, I'm using my other computer for this application for assistance.  steveamos

  Hello

  You can try the following.

  Shut down the laptop.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select Safe mode and press ENTER.  If windows will load in this mode, on the Start Menu, click principally made programs, click Accessories, click System Tools and run the system restore.  Choose a restore point at least 24 hours prior to the issue of logon and then proceed to the restoration.  When you are finished, Windows will restart as normal in order to check if you can now connect correctly.

  Another option if the above does not help is as follows.

  Shut down the laptop.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select "Start using last good known Configuration" and press ENTER.

  Kind regards

  DP - K

• OIM 11 g R2PS2 - how to decipher the user password while calling the OIMClient API

  Hello

  I have a client application that connects to OIM 11 g R2PS2. Users connect in the client application to trigger a request for service and the client application will submit applications to the IOM.

  Connection to the end users to the client application using OAM authentication. So I need to find a mechanism to get the end-user password so that I can use the same in the OIMClient API to connect to IOM.

  If I login as XELSYSADM in the client application, is it possible that I can ask the user password and decrypt the same? I tried to use the code below, but I'm getting null pointer exception.

  RS = stmt.executeQuery ("select USR_PASSWORD from USR where upper (USR_LOGIN) ='" + id + "'");

  If (rs! = null & & RS.) Next {}

  String encPwd = rs.getString ("USR_PASSWORD");

  System.out.println ("get the DB password:" + encPwd);

  try {}

  String decryptPwd = String.valueOf (CryptoUtil.getDecryptedPassword (encPwd, null));

  tcCryptoUtil.decrypt (encPwd, "DBSecretKey");

  System.out.println ("decrypted password:" + decryptPwd);

  oimClient.login (id1, decryptPwd.toCharArray ());

  } catch (Exception e) {}

  e.printStackTrace ();

  e return;

  }

  }

  Exception:

  < 13 November 2015 12:29:01 EST > < error > < XELLERATE. ACCOUNTMANAGEMENT > < BEA-000000 > < class/method: tcDefaultDBEncryptionImpl/initKeyStore some problems: {1}

  java.lang.NullPointerException

  at com.thortech.xl.crypto.tcCryptoHelper.loadKeyStore(tcCryptoHelper.java:145)

  at com.thortech.xl.crypto.tcDefaultDBEncryptionImpl.initKeyStore(tcDefaultDBEncryptionImpl.java:67)

  at com.thortech.xl.crypto.tcDefaultDBEncryptionImpl.getCipher(tcDefaultDBEncryptionImpl.java:99)

  at com.thortech.xl.crypto.tcDefaultDBEncryptionImpl.decrypt(tcDefaultDBEncryptionImpl.java:218)

  at com.thortech.xl.crypto.tcCryptoUtil.decrypt(tcCryptoUtil.java:122)

  at com.thortech.xl.crypto.tcCryptoUtil.decrypt(tcCryptoUtil.java:200)

  at oracle.iam.platform.utils.crypto.CryptoUtil.getDecryptedPassword(CryptoUtil.java:132)

  If you want to use the client of the IOM to send the request as long as the logged on user, IE of OAM session, then you might just get the context of the session of the user so the IOM customer queries will be made in this context. There is no need to decrypt the password for the user in this scenario.

  See rest of URL of excellent example illustrating this: Oracle Fusion Middleware security: authentication IOM API without the end user password

• How ATG BCC admin user password is encrypted in ATG10.2

  Hello

  I migrate data from external system profile to ATG. The external system uses the SHA256 algorithm to hash the user password. And ATG also uses the same algorithm. But I found that the string encodings are different in the two systems. So I customized the implementation for the hash of the password in the ATG. I guess that the same hashing algorithm of password to use in publication environments and CSC also for internal users. But the user "admin" is created when data is imported into the system, initially using script CIM. I think that the admin user password is not chopped with OOB implementation (SHA256) because I consider than salt password 'admin' in the table dpi_user in the edition of schema. Can someone let me know how the admin user password is encrypted?

  Thank you

  Mohan

  Hi David,

  My problem is solved. ATG uses the value of connection as its salt value password instead of generating a random salt for admin, merchandising, users of the services.

  Concerning

  Mohan

• User passwords do not work at the level of the application after updating of the database

  Hello

  Working on the updating of the database user passwords do not work for front end users but the same passwords work at the db level.

  We backup before refresh and restraint after the update, but if the user tries to connect to db, they receive the error invalid password/username.

  but passwords are working at the level of the DB if reset us the password then it works fine, but we cannot do this for all users of all time. can someone share the knowledge or solution for this problem.

  DB version: 11.2.0.3

  operating system: AIX

  Thank you

  892574 wrote:

  Yes, the process is correct.

  We are capture passwords user via display SYS. USER$

  I didn't see any errors in the logs I see only out put modified user.

  Thank you

  Do you mean that you update the column SPARE4 of $ USER (which is a table, not a view)? I don't think it will work, because the password is salted with a random string that will be different in the two databases. It might work if you return to the use of passwords for 10g, which are salty with the user name. See here, the 10 GB hash stored in the PASSWORD column is the same in the two databases, but the 11g in SPARE4 hash is different:

  orclz >

  orclz > conn sys/oracle@orclz as sysdba

  Connected.

  orclz > create user fred identified by Ginger;

  Created by the user.

  orclz > select password, spare4 of user$ where name = 'FRED ';

  PASSWORD

  ------------------------------------------------------------------------------------------------------

  SPARE4

  ------------------------------------------------------------------------------------------------------

  9C592D45D54D1FB2

  S:DF5BEC6914DFF48B39261EAA4DCF5746A309E50E791F6F90FBF2F33A8CD5; H:22E34131E43CC3DF07440A0DC2A45F22

  orclz > conn sys/oracle@orcla as sysdba

  Connected.

  orcla > create user fred identified by Ginger;

  Created by the user.

  orcla > select password, spare4 of user$ where name = 'FRED ';

  PASSWORD

  ------------------------------------------------------------------------------------------------------

  SPARE4

  ------------------------------------------------------------------------------------------------------

  9C592D45D54D1FB2

  S:4FE5925E671719B9CA5904C42AAD965753CAC4891C31F1BA9B9DA83D3255; H:22E34131E43CC3DF07440A0DC2A45F22

  orcla >

• When I try to download standard acrobot his inviting with login user password and its not be downloaded.

  Hello

  When I try to download standard acrobot his inviting with login user password and its not be downloaded.

  When you (or someone) first put on your computer, you (or someone) had to choose a password. This protects your computer, and you need to install most software or change the system. We cannot help you if you forget it, sorry.

• Tables of export and import the schema using the system user

  Hello
  
  Can someone asssit me please:
  
  I want to export all the tables / or some tables of a schema (ETLUSER) on DB1 to ETLUSER on an other (DB2) database by using the user of the SYSTEM. The SYSTEM user has DBA privilege.
  How I do what I do not know the password of ETLUSER.
  
  Environment:
  Oracle 11 g 2, AIX5
  
  Thank you.

  no problem, shouldn't you password in the ETLUSER.
  Start your exp or imp of the user of the system

  below, scott table dept exported and imported in the HR schema.

  Oracle@oragg1 > exp tables = scott.dept file = a.dmp log = b.log

  Export: Release 10.2.0.4.0 - Production on Mon Mar 19 18:58:45 2012

  Copyright (c) 1982, 2007, Oracle. All rights reserved.

  Username: System
  Password:

  Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Production 64-bit
  With the partitioning, Real Application Clusters, OLAP, data mining
  and Real Application Testing options
  Export in US7ASCII and AL16UTF16 NCHAR character set
  Server uses WE8ISO8859P1 (possible character set conversion) character set

  About to export specified tables by conventional means...
  Current user has changed to SCOTT
  . . export the DEPT 10 exported table rows

  Oracle@oragg1 > imp leader = a.dmp log = bb.log fromuser = scott touser = hr

  Import: Release 10.2.0.4.0 - Production on Mon Mar 19 18:58:56 2012

  Copyright (c) 1982, 2007, Oracle. All rights reserved.

  Username: System
  Password:

  Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Production 64-bit
  With the partitioning, Real Application Clusters, OLAP, data mining
  and Real Application Testing options

  Export file created by EXPORT: V10.02.01 by conventional means
  import in US7ASCII and AL16UTF16 NCHAR character set
  import server uses WE8ISO8859P1 (possible character set conversion) character set
  *. import of SCOTT in HR objects *. .
  "DEPT" table import 10 lines imported
  Import completed successfully without warnings.

• Cannot reset the user password e-Business suite

  Password reset is allowed (field is grey out in the form of user). Is it because of logon Oracle SSO (approx registered 10gAS)?

  Salvation;

  Please check below note that should be useful on your question:

  Cannot be reset everyone's [ID 430001.1] system administrator password
  After SSO implemented the URL of Notifications Sourcing is routing incorrectly [ID 1088093.1]

  Respect of
  HELIOS