Exchange the HARD disk of 1 TB for one SSD 120 GB problem...

Similar Questions

• I want to Exchange my hard drive of my iMac for one SSD. Existing hard drive will be cloned on the SSD. I have CS 3 Design Standard installed. What I have to deactivate/reactivate CS3 or will keep the data license/activation?

  Oh, I of course put the whole issue in the reference line.

  I'll repeat it here.

  I want to Exchange my hard drive of my iMac for one SSD. The existing hard drive will be cloned on the SSD. I have CS 3 Design Standard installed. What I have to deactivate/reactivate CS3 or will keep the data license/activation?

  Thanks, Thomas

  Transfer facilities of Adobe does not normally operate.  You must reinstall using installation files.  At a minimum you must disable, but you may find that you need to uninstall and reinstall.

• Firefox for Android blocks on the hard disk of fire turn on one or two seconds after the start. Is there a compatibility issue with the Kindle fire HD?

  Load the latest version of Firefox for Android on the Kindle Fire HD & Installed. The program completed the installation process, but as soon as Firefox is started in a few seconds the program stops.

  Is there a problem with Firefox and Kindle Fire HD?

  I don't want to use Chrome and the browser of silk Kindle is not very good. I have Firefox on all my machines (desktop, computers cell phones, Android phone, 2 and (hopefully) Kindle) and want to be able to synchronize my favorites, etc. between each one for a consistent use.

  There is only an apk at this link. He is currently the fennec - 20.0 6 .multi .android b - arm.apk

• How to level a T61 HDD for one SSD without reinstall?

  Hi all. I bought this ThinkPad, I write with back in 2008 (a T61 6465-CTO with Vista and Intel integrated graphics) and he has been working a lot to me since then. I had no problems with it and his equipment is still able to manage what I have to do. However, I wanted to move her to an SSD HARD drive is faster and snappier. I know that I have would be limited at SATA1 speeds with this camera if I don't want to change the BIOS (which I did not), but I think that even this would be a great improvement on the existing HARD drive.

  To that end, I recently bought an SSD that their prices have dropped slightly (bought a new 120 GB SSD Samsung 840 for less than $100). I said SSD sitting next to me now but I did nothing yet because I want to make sure that I have the right to clone the old disk and swap in the new process. From what I understand instructions, I should:

  1 turn on the computer, install the Samsung Data Migration Software
  2. connect the SSD to a USB port via a USB-SATA Adapter
  3 clone the main for the SSD connected HARD drive using the software of data Migration
  4. turn the computer off, physically remove the old HDD and SSD in its place
  5 turn on the computer and everything should be fact/same as before (with the exception that the computer has a new storage drive)

  Is this correct?

  The HARD drive is encrypted so I removed the password for user/master I have to enter when it starts up, but what I have to do the same for the BIOS password that I am invited to when you turn on the computer? What the hidden; restore partition would clone too much or it would be lost. The HARD drive is in my opinion a 160 GB model, while the SSD is 120 GB but I have read that this difference in capacity should not be a problem since I'm using less of the new disc capacity (I have about 100 GB of free space on the HARD disk)?

  Sorry for all the questions. I have very little experience when it comes to changes in the software/hardware and I really would like to avoid wasting it so I would appreciate any help from people who have knowledge fact how to do this successfully. Thank you.

  The installation that you want to be cloning is optimized for spinning a player - not SSD - and you would have to align in a first time, disable the services later and again, you would not get the performance of a "clean" installation

  You can use any disk Vista installation as long as it matches the version (Home, Pro, full) on your COA - the worst that can happen is that you would have to call MS and activate by phone.

  I had the question why you want to the outdated drivers and other bloat Lenovo recovery partition on expensive SSD space as well, but it's your call. If you provision the reader - and I think you should - you won't initially that much space...

  TRIM running manually is certainly a possibility, but not one that I'm particularly sharp, especially on a small disc of TLC as the Samsung you have. You will need to be on it for not to have slow down for analysis.

  Good luck.

• When I connect windows, the hard disk works for several minutes

  Hello

  A few months ago and after installing some windows update (XP Sp2), I see when I login to windows, drive hard work continuously for several minutes and speed goes down.

  What windows software using the hard disk with log in?

  Thanks in advance

  motasemsadelghi

  What you see could be linked to a task that you have schedules (such as anti-virus, defragmentation of the hard drive, etc)

  Check the tab startup in MSConfig for items which currently running as part of the startup of your PC. See

  http://support.Microsoft.com/kb/310560

  The foregoing is for XP, but also applies to Vista.

• access all information on the hard disk for all users.

  I tried to set up a link today from my new laptop computer Windows 7 my most top of desktop running vista.  The liaison program stated that the administrator on my old computer was only a temporary user.  I tried to set up the account as a permanent user without realizing that it would replace the current account.  I have now no access to programs from hard drive of the main user I was using.  I was wondering if there is anything I can do to access the hard disk with this user and import files?  I forgot almost all programs appear on the computer but open to anything.

  Hi kismet.

  1. What do you mean by link program?

  2. What have you tried to do?

  3. how many accounts do you currently on the computer and what are they?

  4. what happens when you try to access the files on the hard drive?

  It seems that you do not have permissions to access the files on the hard drive.

  I suggest that take you the files and folder try to access.

  To take ownership of a folder

  (a) right click on the folder you want to take control and then click Properties.

  (b) click on the Security tab, click Advanced, and then click the owner tab.

  (c) click on Edit. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (d) click on the name of the person you want to give to the property.

  (e) If you want that person to be the owner of the files and subfolders in this folder, select the check box Replace owner subcontainers and objects .

  (f) click OK.

  Troubleshoot "access denied" when opening files or folders

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-access-denied-when-opening-files-or-folders

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Try to migrate from the hard disk for ssd drive

  Hello, 4 days ago I bought dell inspiron with windows 8.1 5748 and a 1 TB hard drive.

  I also bought samsung 250 GB of ssd drive 840EVO to replace the disk of 1 TB of the laptop. I cloned the HARD disk drive and restored the image in the ssd drive and when I mounted the SDS disc and shot to the top of the laptop I got an error that it cannot detect a drive... Press F2 to enter setup F5 for diagnostics and F1 to reboot.

  First I made sure to rise properly. After I checked I entered the bios where I noticed that the drive is recognized in the details of the system. The model was correct, the capasity as well. Fashion was ahci.

  I ran the diagnostics and they couldn't locate a drive.

  So, is this an incompatibility? I checked for updates to the bios and I see I m to date on that. The player is surelly ok as I have tested on another pc...

  What can I do?

  Thanks in advance!

  Hi Add1ctiv3,

  We recommend that you use the recovery disks that are you ready when you got your system to restore the image of the original on the SSD hard drive. Since they have the same size, it should work without problem.

• I have a clone of the hard disk that my images are on for the trip.  How to run LR using that drive rather than what he became in general?

  I cloned the drive that my images are on a hard disk that is tougher to travel.  Think of this as an extra back upward.  How to run LR using that drive rather than what he became in general?  My plan is to return to the top/clone the drive trip to the typical reader when I go home.  The catalogue is available on a MacBook Air I'll use at any time.  It is not just enough space on the hard drive of MB Air for images.  I thought of naming the road trip with the same name as the player who is at home, and know that LR, but I think I'll get confused by doing this. The info on the two drives is the same at this point.

  Thank you.

  You use the update folder location command, as explained in part 2 of this document: http://www.computer-darkroom.com/lr2_find_folder/find-folder.htm

  You can consider using Smart saw instead of wearing of the pictures with you on an external drive, if you have the space.

• Capacity of the hard disk for NX9030

  Hello

  I have a laptop HP Compaq NX9030. The hard disk starts to show errors so I intend to replace it. Does anyone know if the laptop has a limited capacity for replacement hard drives?

  Thank you

  Dave

  You have the Intel 855 chipset. In order to launch a hard drive larger than 137 GB, you need help for 48-bit Large Block Addressing in the chipset, BIOS and operating system. I find contradictory information on the ability of the chipset 855 doing of 48bits LBA. I also wonder if ever taken HP worth of produce a BIOS that would make 48 bit LBA in this model being the biggest hard drive offered 60 gigs. In other words, I think you should assume 120 GB is size max hard drive you can use and the only way I can think to prove otherwise is to buy the largest disk and install it. Windows XP Sp1a and superior does not large drives.

• Increase the capacity of the hard disk for VM

  Hello

  I use ESX 4.0 with vSphere 4.0.

  When there is no snapshots more I would like to increase the capacity of the hard disk of the virtual machine in the menu to change settings / Hard disk. There is MS Windows Srv 2008 R2 64-bit installed.

  What is the right way to do it? Operating system, there is no problem with this increased disc? Primary partition will automatically increase as or what I have to do it myself later?

  There should not be problems with the guest operating system when you increase the size of the virtual disk. After the increase in size in the settings of the virtual machine, you need to resize the NTFS partition in the VM Windows 2008 disk management.

  André

• Re: Satellite Pro A40 - can I change the HARD disk or the same model?

  Hi Forum,

  do I have to wait for safe trouble by changing the hard disk between the following laptops:

  old or damaged laptop:
  SPA40 model PSA45E - 0013T - number GR
  Series No. 34127882 H

  new/own laptop
  SPA40 PSA45E-001VM-GR model number
  Series N0.34117607H

  Thanks in advance for your advice

  Concerning

  You can do it. No problem at all. Hard drives are not specific model of laptop parts and with hard drives is important compatibility.
  On the new laptop, which you can use different hard drives. Important is that use you compatible HARD drive.

  Just do it. After Exchange of HARD drive install Os again and everything will be OK.

• Why the HARD disk is partitioned into C & D on Satellite Pro C partition

  Why the HARD drive is divided and how to use it?

  It is important that the one that I use?
  It turns into one big disk?

  The manual says nothing about this.

  Thanks for any help

  Ken

  Hello

  The HARD disk is partitioned and contains two partitions. The C partition is the system partition that contains the Windows operating system. The second D partition contains data drive HARD recovery.
  HARD drive recovery allows you to establish the notebook back to factory settings without the recovery disk usage.

  But it s is strongly recommended to create the recovery disk! The user manual provides the info on that in case something goes wrong with the HARD drive, the recovery disk allows you to recover the laptop.

  Of course, you can delete the D partition if you want to, but before doing so, you must create the recovery disk.

  However, my HARD drive contains 3 partitions. I created an extra. In my case, the C partition contains only system and the unique software. My files private like Mp3, movies, etc. are placed on the D second partition).
  The third partition (E) contains a folder with games.

• Satellite L450 - how do you start the recovery from the HARD disk?

  Hello world

  I just joined the forum and already I need help.

  I have 2 questions (10) I'm an ODP, and I volunteer for a local blind group who all have laptops and rewrite the textbooks in braille users. Now a desire to know how start recovery from the HARD disk drive and what you should do disks for this.

  and (2) another received a laptop computer Toshiba A 100 and it does not start as soon as the Toshiba screen appears it lacks a password, we tried all kinds of passwords, tails of start and a new record of program but it does not start. Can anyone help please.

  Ken

  For instructions how to recover a Toshiba laptop with verification of HARD drive recovery procedure please this document > http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm

  The Satellite A100, I presume that you need BIOS password. Unfortunately, there is nothing you can do about it. Accredited maintainer Toshiba can remove the password for you.

• Satellite P300 - 190 PSPC2C - water spill and the HARD disk does not appear on the Setup

  Hello

  Spilled water on the keyboard. Laptop has stopped working.
  Dried, but did not recognize the HDD start up and HDD does not Set - up.
  Moved the HARD drive to another location of the HARD drive on the laptop and it appears at startup and boot OK.
  Is there an easy way to find and repair the defective HARD drive slot?

  Thanks for any help.

  PK

  Hello

  The HARD drive slot is not repairable. It s a HARD disk controller and I guess the HARD disk controller is dead.
  The HARD disk controller is part of the motherboard and if you want to repair it, so the entire motherboard must be replaced.

  New motherboard would cost a small fortune he of not good about market 350Euros
  That's why I put t think it is s to replace the mobo only to get the HARD drive in the first location of work

  This is my personal opinion...

• Impossible to 'System' to defrag Portion of the hard disk on Windows 7 Pro or Windows 8 Pro dvt7-3000

  I have a laptop HP Pavilion dvt7-3000 CTO that has a single disk drive hard 500 GB.  The operating system has been improved in Windows7 Pro (64-bit) to Windows 8 Pro (64-bit), but the problem occurs in both operating systems.  When conducting the defragmentation of the different hard disks (C:\ D:\, HP tools and system), the percent of the "System" drive which is fragmented never changes, while the % fragmented adequately for other readers going to 0%.  Over time, the system part of the hard disk rose to 27% fragmented.  How to defragment this drive?

  Hello

  The system partition contains the boot files and recovery for Windows 7 environment and should not be défragmentée.  It will always appear to be fragmented and it is quite normal - force this partition defragment would almost certainly avoid the Windows startup.  In addition, the fragmentation in this small partition has absolutely no effect on performance.

  For much the same reasons, the recovery partitions or HP_TOOLS must be défragmentées.

  Kind regards

  DP - K