Portege R600 - how to configure RECOGNITION FACIAL?

Similar Questions

• Portege R600: How can I activate the modem 3G without original modem minipci slot

  Hello everyone,

  I own a Portege R600 (10 s) for laptop and I often use mobile internet.

  The built-in modem Ericsson 3507 is buggy, always freeze (and who need reset) from time to time. No firmware update or driver makes it more stable.
  So, I bought another 3G mini-pci modem, a huawei EM770, to replace the original modem.

  The problem is that I can't use more of the Fn + F8 combination to power on the 3G modem.
  The modem huawei is well detected, installed, but no power (the blue led is off).

  The question is how can I turn on the connector of the modem 3G mini-pci, without the original E3507 modem?
  Thank you in advance for any lawyer.

  M.

  Toshiba Value added package and control RF Utility 3 G are related to the F3507g (and F3607gw) and will not work with integrated modules, not supported by Toshiba.
  There could be BIOS problems as well.

  What was the problem with your F3507g?
  Looks like it works for many people.
  Maybe you have a bad Apple?

• Portege R600 - how to use the external monitor on the docking automatically

  Hi - I just got a new Portege; R600-102. It's a great machine - very light and fast.

  I connect to a Slim port replicator to the office and I wish I could anchor and automatically use the external monitor without opening the laptop. Can someone point me in the right direction on how to do it? This process has worked well on my recently retired Dell X 300.

  More precisely:
  # I have the laptop closed Portégé and standby mode
  # I anchor in the Slim Port Replicator (SPR)
  # I press the button 'on' on the SPR
  # I see the message "recovery windows" and the bars of the countdown on the external monitor. (So I know it's connected and you can see the external monitor)
  # The laptop turns on but use the laptop screen (private) LCD
  # I have to open it and manually tell it 'out to watch.
  What can be automatically?

  Thanks for the tips.

  Post edited by: ExDirectory

  Hello

  You use Windows XP Home or Vista edition?

• Portege M400: How to configure command in Vista buttons

  Hello!

  Can someone tell me how to use the buttonsetting.ini to configure the buttons with the TBSbtnSt.exe.
  Best result would be to get the Coursor and Rotation of the display lid buttons to work under Vista.

  Thanks for the tips!
  Jochen greetings

  Hello

  On the European driver Toshiba page, you will find all the Vista drivers required for a Portege M400.
  There is also a Support Button driver and this driver allows you to customize and TOSHIBA special button preset settings.
  There is also a Tablet PC for Vista Extension Package!
  This package installs a range of important public services and contains this apclations:

  TOSHIBA Rotation utility: Set the orientation of the screen by default as the system to be used in the transition from the PC to Tablet mode, or vice versa.

  TOSHIBA Tablet PC buttons driver: You can dedicate the buttons on the tablet to perform common tasks so that you can easily use your tablet PC away from your workstation. For example, you can dedicate a button to open a program or to change the orientation of your screen.

  TOSHIBA accelerometer utilities: These utilities are a set of material utilities that work with the integrated motion sensors you machine. With the accelerometer, your machine will be able to detect how you're holding it at one point. You can set the machine to perform a specific function when the device is tilted quickly left or right, either at the front or back. You can also take control of the cursor in some applications and move by leaning the PC in a certain direction

• Portege R600 - how to set resolution automatically?

  The R600 is on XP Pro SP3 and a computer very well. I wear it to work and a large monitor, and the video is very good. When I go home, however, I use the computer as a laptop with no external monitor.

  I have to go on the desktop > properties > settings and adjust the video up to 1280 x 800.

  Is there a way to tell the machine to do it automatically?

  Thank you!

  Hello

  You can set the display as extended desktop.
  Then, you will not have to change the resolution on the internal display.

  The extended desktop can be configured for the external monitor and you could leave this setting also with the laptop at home.

  I have connected my laptop to external monitor and have changed the screen extended desktop.
  Can I use different resolution for the internal display and the external monitor.

  PS: you can change very easily by using the FN + F5 keys

• Portege R600 - how to install XP on a new HARD drive?

  I did the mechanical installation of a new hard drive and it's correct.

  Now, I want to install XP - Vista not. However, nothing I've tried will allow the BIOS to recognize the new drive. 'Alternative media' drive of Toshiba XP should include the SATA drivers, but it does not work.

  What did I miss?

  Hello

  Do you mean the new HARD drive is NOT visible in the BIOS or the new HARD drive is not recognized by Windows XP Setup?
  Those are two different questions

  If the HARD drive is not recognized by the BIOS, then you used the disk HARD is not compatible.
  But if the HARD drive is not recognized by installing XP then you have not installed the SATA drivers that are packed in the Intel Storage Manager.

• Face recognition is available for Portege R600?

  I was under the impression that this (a very competent machine!) R600 has face recognition - but I can't find this feature. Can I download from Toshiba?

  Thank you.

  Face recognition is also available on Portege R600.
  You can also find for download from Toshiba support page. There you can find the version 2.0.17.32 for Windows Vista.

• How do I know of Portege R600 wireless card?

  I have a Toshiba Portege R600-101 and would like to know what Wireless LAN card I have, to know what driver I need to download.

  Using Device Manager is not an option, because I reinstall windows and now it does not recognize the card. How can I see this?

  Hello

  I think you can use Device Manager to find out what is the WLan card.
  In-network cards > Device Manager, you can find the WLan card. Its should be listed as unknown device or Ethernet controller

  Mark it and go to properties.
  On the Details tab, you will find the DEV PCI ID and the VEN ID

  You can use this database to search for the vendor id and the device id.
  http://www.PCIDatabase.com/

• Portege R600 - 13 X - how to reinstall the operating system on the new HARD drive?

  Hello

  I inherited a Portege R600 - 13 X of my colleague, who hit and killed the hard drive. I installed a new hard drive, but you don't have operating system installation diskettes as he said that the computer has not come with any. To make things even more difficult, I believe that the optical drive may not work. My old R500 had a dead optical drive and after I replaced it (he has not yet worked) I was told it is perhaps something to do with the ribbon cable, which piggy back off the coast of the SD card reader, then to the motherboard.

  Anyway, is it possible for me to install Win 7 Professional (I have the original windows key) from a USB flash drive? Or y at - it a specific OS recovery/reinstallation disk that I can download Toshiba?

  Any advice would be very welcome
  Thank you
  NJ

  I have a Portege R600, and he has been a formidable workaholic, although now showing its age with newer software.

  I think these machines came with pre-installed Vista and your friend must have created a set of recovery discs when they got off the machine.

  Toshiba did release a drive to upgrade when Windows 7 is released which was available to the buyer within the free upgrade period you. You may be able to find a disk, but you will need the Win7 license to go with it.

  If not, your only option is likely to be to buy a disk and license. Of course, you can find the specific Toshiba drivers are missing. If you think about it, it's extremely unlikely that you will be able to locate what is essentially a free Windows 7 download install disc.

  Without an optical drive, you need to use an external USB drive and the BIOS to boot from that first force.

  I hope that you have succeeded.

  Andrew

• Portege R600 - 3G or WiFi - how to set the priority of connection

  Hi, all, wonder if anyone can suggest an answer to this query?

  Our (not too illiterate I.T.) MD has a Portege R600 and a 3G dongle it uses to compose on our VPN and Citrix server using the built-in wireless connection manager.

  It works fine, unless it is in an area where he can get the two Wi - Fi _and_ a 3G signal, which case the R600 resumes and connects to the Wi - Fi connection itself, but it can not noticed this and he then manually dial on the Internet via 3G dongle.

  According to the parameters of the Wi - Fi network it is on, this can cause problems to connect to the Citrix server as it tries to connect via Wi - Fi network and not the 3 G dongle.

  So my question is, in the wireless connection manager, is it possible to define a priority or priority which the network, Wi - Fi or 3G, is used for its Internet connection? Ideally, we would like to set up the 3G network as a higher priority, but I don't think this is possible using the WCM.

  I realize the ideal situation would be just him train on turning off the WiFi connection, leaving the 3G connection as the connection active unique (it cannot turn the wireless off full stop by using the switch on the side of the laptop as this turns off the 3 G connection more).
  But like I said it is not too good with all things I.T.

  Any suggestions most appreciated!

  Thank you very much

  KW.

  I n t have this laptop model, but please check the FN + F8 key combination.
  He can choose it option 3G only?

• Portege R600: SIM inserted but error: "device not found".

  Hello

  Portege R600 under XP.
  Put a SIM card in the slot, but I get the error above: Wireless Manager Toshiba "device not found".

  Cannot find the configuration options or anything like that in the manual.
  Can someone point me in the direction of literature?

  Thank you very much!

  Evan

  Hello

  Here you can download the latest version of 3G driver and tool:
  http://APS2.toshiba-tro.de/WLAN/?page=3gdownloads

  Here you will find a knowledge base on the topic of G 3:
  http://APS2.toshiba-tro.de/WLAN/?page=3ghowto

  and here you can find a HowTo create + how to create a Dial-Up connection with 3 +.
  http://APS2.toshiba-tro.de/KB0/HTD9802OF0000R01.htm

  Hope this helps

• Portege R600-11b - screen is very low

  Hello

  The screen on my Portege R600-11b disappeared suddenly extremely dim. There is no problem with him coming back to life after hibernation - but he remains coems back extremely dim. Light blinks until when I press the button in the upper right corner with a symbol of the Sun.

  I think I might need a FL inverter? Do you know how do I know which I need and instructions on how to fit it?

  Also I had problems with Windows 7 Professional turning very slowly. I'm assuming that the two problems are not related.

  Hope you can help, thanks.

  Hello

  I recommend connecting an external monitor.
  If the image on the external monitor would be perfect, then your internal screen or inverter maybe FL needs to be replaced.
  You ask how to check this?
  Well, I'm afraid of each part should be checked using another good part tested m.

  In your case I would ask a support specialist
  Guarantee is valid? If yes then I recommend to contact Toshiba service in your country.

• 3g Modem internal Portege R600

  Machine Portege R600
  Operating system: Vista PRO
  Internal modem: modem
  Network provider: Service Orange business (France)

  Toshiba client does not work with the service Orange business (unable to connect with this 3G supplier)

  Solution: use the Orange business client software, this customer is not totally compatible with this computer.
  All installed and did the work of this computer with Toshiba customer with Orange business service?

  Orange requires the IMEI be saved?

  You may need to configure the gateway settings in the software 3G?

  Have you tried any other connection managers?

• Portege R600-10 q keeps freezing after a short period of use

  Hi I have a Portege R600-10, q,

  It keeps freezing after a short period of use - although if I leave it for a few minutes, sometimes it can be useful.
  If it is turned on for long enough, it will display a blank screen and the fans will turn on very hard.

  I cleaned ports ventilation and re-glued the CPU, and it did not make a difference.

  I ran HDD and memory (mhdd/memtest) diagnostics, and they have all done.

  I reinstalled Windows (from the OEM disc) and I still see the same question.

  Anyone have any ideas on how to solve this problem?
  Thank you

  Hello

  Have you noticed that when running special software or apps?

  I can tell you that a memtest does not always provide a good result
  Even if the memtest said there is no problem with memory, RAM modules could malfunction

  Otherwise, it may be a motherboard problem, but this is just speculation

• Portege R600 - cannot create recovery DVDs

  Hello! I just bought Toshiba Portege R600-146 and attempted to create a DVD with the system recovery but DVD drive does not recognize DVD discs and fails the diagnostic test PC CD/DVD Toshiba. I can't even create a backup of the system.

  Is it a software fault (Mat * a DVD - RAM UJ - 844 S USB Device drivers or compatibility with Windows 7) or the material, and how can this be resolved?

  Hi Dmitry_3,

  Have you already checked if the CD/DVD drive is properly recognized in Device Manager or it appears with a yellow exclamation point?

  In this case, it might help remove upper and lower filters:
  + 1) run Regedit (start-> Run-> Regedit).
  + 2) navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318} +.
  + 3) in the right pane, delete the "UpperFilters" key and delete the key "LowerFilters". +
  + 4) reboot. +