Satellite P300 - 190 PSPC2C - water spill and the HARD disk does not appear on the Setup

Similar Questions

• my computer detects the usb pen, but when I try to send files to it in "send to" my hard drive does not appear.

  Usb detects the dvd player and my external hard drive, but does not detect my hard drive. I tried to disconnect the external hard drive, but still, it does not detect my hard drive. The drive letter is E: and pen usb H: external drive letter is F: HELP!

  When I try to send files to it in "send to" my hard drive does not appear

  What hard drive, external or internal? Normally only removable devices appear in the mailing list.

  You could use copy and paste instead, or see the following article...

  http://support.Microsoft.com/kb/310270

  .. how .to add items to send it to the list.

  Tricky

• Where can I find "Windows Fax and Scan" if it does not appear under my "all programs"?

  Where can I find "Windows Fax and Scan" if it does not appear under my "all programs"?

  WIndows Fax and Scan is only supplied with Vista business, full and firm.

  http://Windows.Microsoft.com/en-us/Windows-Vista/send-a-fax

• All my addons have been deleted and lost. Even backup has been removed in the latest update of FF. Now addons will not appear and add on bar does not appear. How to fix?

  All the Addons are missing after a recent update of FF. Backup also failed. How the hell that happened? made me? Went back to recharge add on extensions that I needed to use. However, add it to the toolbar does not appear. Tried restoring add on extension of tool bar. Now I add it on the toolbar in the verified Tools menu that was not there before. However, add it to the toolbar doesn't show always upward. Custom selection is worthless because it does not show that the extension add ons. I can check the extensions downloaded in add it menu and they are activated. However, they are not work or appear as it should!

  It is a bigger problem than the simple click here or there.

  I would say definitely go for the clean reinstall of Firefox. Your problem is obviously much more complex then just a misconfigured setting or something. When you updated Firefox, something may be wrong. The instructions are in the post 5.

• I installed microsoft excel viewer and now firefox icon does not appear on the saved web pages. It just display the icon "don't know what to use to open.

  Big mistake! I installed microsoft excel viewer
  Firefox icon does not appear for saved web pages. Or didn't save IE web pages. I just get the icon "I don't know what to do with this."

  This has happened

  Each time Firefox opened

  == I installed microsoft excel viewer

  I re-installed excel viewer and the problem is not to be reproduced.
  Hope that this does not come to the time where I re - start.

• New hard drive does not appear in the disk utility

  I am installing a new hard drive in my late 2011 13 "MacBook Pro. I started using apple's online retrieval system and went to disk utility. I tried to format the drive, but he is stuck saying "remove disc" for about a half hour, and then I had a rotation beach ball and could not move the cursor. I restarted the computer and now the drive does not appear in the disk utility. Any help is appreciated as I have no idea where to go from here.

  Thank you.

  You will may be turned off and check that your hard drive is correctly positioned with all the screws tight.

• "My external hard drive does not appear in Windows Explorer and cannot open 'Help and Support', an error message" Windows cannot open help and Support because a system service is not ongoing.

  Original title:

  Everything was fine until yesterday. Juice now, when I plugged the external HD into the USB port it does not appear in the 'my computer' window. It is recognized by the computer as it is present on the list of the "Disk Clean Up" and it also appears when I click on ' Safe Remove Hardware ' on the taskbar. But if she does not appear in the 'my computer' window I can't work with it or don't even know what it I have arquived in it.

  Trying to find a solution, I realized that same 'information system' to 'System tools' is also not available. Pops up a window saying that "Windows cannot open help and Support because a system service is not ongoing enforcement. " To resolve this problem, start the service named help and Support '. OK, I tried to open 'Help and Support' ' Start Menu ' and the same window appeared again to "not have a system service that runs". I don't know what her soul precisely and I have not the slightest idea of what I need to do to correct this 'disappearance' of Service 'system '. There is nothing without the appearance of HD in the window of thw work? Everything else works fine and the calculation is virus-free. What should I do?

  Hello

  You did changes to the computer, before the show?

  Solution A:

  For the problem with the external drive not appearing is not in Windows Explorer, see the following methods.

  Method 1:

  Check out the following link.

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

  http://support.Microsoft.com/kb/925196

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 how to back up and restore the registry in Windows

  Method 2:

  Connect the external hard drive on another USB port and check.

  Solution B:

  For the problem with the help and Support, check if the service is enabled.

  a. click Start, click run. In the Open box, type services.msc and press ENTER.

  b. right-click on the service called Help and Support , and then select Properties.

  c. under the general tab, set the type Startup to Automatic and click Start.

  d. close the services window and check for the issue.

• Hard drive does not appear in the preferences?

  Hello

  I have an external hard drive that I want to use as the scratch disk in photoshop, but it does not appear when I open preferences > performance? My other two hard drives that are connected and mac HD appear well?

  This external drive is properly formatted as a Mac OS Extended ?  It should not be formatted as logged, but it MUST be Mac OS extended.

• Tecra 8000: monitor and the HARD disk does not work - does not start

  I have a laptop Toshiba Tecra 8000 given to me the year last by my uncle. I live in England, but it is and bought the PC in Italy. I do not know if this causes complications, but I thought it may be useful.

  Since I got it it occasionally did not display any image of all system startup, so if I have given some time and restarted it would start working again. Happening of bagan more frequently and now I can't make it work. I have conections and found that everything was in place. Then he doesn't seem to be turning on, however when I replaced the front LED cable seems to be turning on and although I couldn't hear much the CPU was luminous heat. I opened the drive and it gave once more, succeeded him and he still wouldn't start. I had purchased and replaced the screws on the heatsink around this area but I did not handle it with many other things.

  So now, I have a monitor that does not work and a gard drive that won't start... Any ideas?

  Thank you!

  Hello

  Could be either the card mother, CPU or ram. The processor when it goes bad or is not locked in place (have had this before, install the CPU but forgot to turn the lock, so he cannot move) the computer will act as its startup, don't give any error and stay on a black screen. Verify that the processor is locked in place. Then remove the ram and try a stick of RAM that runs on another computer. If you try the RAM and the processor do not always start, then chances are your motherboard is dead and must be replaced. Hope this helps and that solve you the problem.

• Windows 7. I add a hard drive not formatted to my computer. He is recognized in the BIOS and Device Manager, but does not appear in windows Explorer. How should I proceed? Advice please.

  Windows 7
  HARD disk: Samsung Spinpoint 250

  Make a right-click on the icon my computer

  Select manage in the 'breath' menu

  In manage, select disk management

  from that, you can then complete implementation, partition and format the new hard drive.

• hard drive does not appear in the finder - but on desk

  Hello Hello,

  So I did some mess and it would be wonderful if you can help.

  I tried to make the 'see' an external drive using the privacy setting, but I managed to do away

  ear of the finder. I can see and use it on my desktop and utility disk, but it does not show in finder. What I did do, and how to fix it please?

  Thank you!

  Try to eject, and then unplugging the drive and in him plugging.

  Did it solve this problem?

• How to install xp after installation disc and erased hard disk is not available?

  My windows xp system was not working, I erased the hard drive! Now I have a computer that does not work!

  To develop what Daavee wrote, please explain, step by step, exactly what you were doing in your attempt to "recovery" of the computer and include a description of the "recovery disk" - that is, made the "recovery disk" you have used come with the computer or do you have it created when you bought the computer first?

  In addition, please explain what happened when you run the recovery disc - in other words, have you seen all messages concerning the formatting of the disc; on the Windows installation: or error messages (please, report them to the better you remember).

  "When you say the computer" will not work "-what happens when you turn it on (after removing all CD/DVD drive)?  Report the full text of the error message.

• New hard drisk does not appear in the start menu

  Original title: how to install windows vista again portable hard drive

  Hai I bye a hard disk for my computer laptop is 550 HP Seriers notebook, because my previous hard disk have complaints, but when I corrected this hard drive in the laptop the start menu does not display of hardisk why?

  Hello

  1. you have a single hard drive connected to the computer?

  The issue could be related to the physical connection of the hard disk, I would suggest that you check the physical connection of the hard drive and check if that helps. You can also get in touch with the manufacturer for details on the connection.

  The issue could also be tied to the BIOS settings. You can get in touch with the computer manufacturer for help with the BIOS settings.

  Note:

  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

• How to disable the file hiding (changing options for hard disk does not work)

  Hi all

  I hope someone can help me with the following problem:

  -J' need to open a file of 16 GB of content in third party software (Stata) who reads completely in memory.

  -Due to Windows caching file, necessary to get the procedure done about 32 GB cache files and Stata access physical memory.

  -As I have only 24 GB of physical RAM file is read later part of virtual memory, which leads to serious performance problems.

  I unchecked the box 'Enable write on the device cache' to my hard drive. That did not help. Is there a way to disable the Cache during PLAYBACK of files?

  Thank you very much in advance for any help!

  Tobi

  The write cache and virtual memory are different. Virtual memory is an extension of the physical memory residing on the HARD disk where Windows is installed. Normally, the virtual memory is about twice the size of the current physical memory. Write cache is an exclusive setting for external hard drives only and has no effect in internal hard drives.

  In your case, please note that full 24GO of RAM will not be allocated to the program. At least 1 GB will be reserved for windows, so the rest of the programs are moved to virtual memory, which means that the HARD drive. It is not recommended to disable virtual memory because it can cause stability problems. In addition, the files are not copied directly in memory, even if they are big. Instead, the parts of the file are available and this area, including the incremental values and material, are stored in the memory. So if all of a sudden, you access an area of the file which is very far away from the previous location, it takes time as the new area, as well as differentials and material value of a few bytes is also copied to the memory. The box of files previously displayed is erased from the memory.

  For performance improvements, you can go for the SSD, RAM with higher clock speed (must be compatible with the motherboard) as processor as well as the upgrade. However, please note that the process of accessing a file even as mentioned previously, but the speed will increase because of the higher bandwidth and the clock frequency.

• CS 5 hard disk does not need to reset the activation so that I can use

  CS 5. Windows does not start, but I can't access HD can I disable installation so I can reformat and reinstall after installing windows?

  If not how to contact Adobe (phone without help, cat even less help) to get an another activation oudit, so I can use the product?

  Thanks Kevin

  You should contact the Adobe Support via chat and ask them to reset your account activation.  It's everything you ask of them... ask anything else and they are likely to return you in the forums.

  To the link below, click on the still need help? the option in the blue box below and choose the option to chat...

  Serial number and activation support (non - CC) chat
  http://helpx.Adobe.com/x-productkb/global/Service1.html ( http://adobe.ly/1aYjbSC )