exe created with labview, 2012 will not be run using LVRTE2013

Similar Questions

• can I open a vi created with labview 2009 on worm Labview 8.5?

  I have a vi created with Labview 2009 and I want to open and run the vi in Labview 8.5.

  It opens to 8.5

  Can I save the vi since 2009 in a format that is compatible with 8.5?

  If you click the file menu in the toolbar of LabVIEW, you should see a "except for the previous version. If your vi does not have all the features that are specific LabVIEW2009, you should be able to save it to 8.5.

  LabVIEW is generally open earlier versions, not the other way around. I say generally because there are a few points that have changed drastically, such that you have to use an intermediate version to make the vi up to a more recent version.

• MsiError 1627 then install application created with labview 2009

  Hello

  I tried to install an application created with labview 2009, I have this fatal error ' MsiError 1627: 1: 2727 2: UsFile.

  Executable works fine while the installer does not work!

  UsFile is a Lvclass. I don't understand why I have this message.

  Thank you very much.

  Hi thanks for the reply,

  I don't delete the installation program. It has not been disabled or corrupted MSI.

  Problem is in the source file: ProgramFilesFolder was not also identical to my request. So I refreshed that (the folder UsFile appeared not in ProgramFilesFolde)

  Now it works!

  Thank you very much Bye

• How can I change my country when I have a balance that I can't buy anything with? It will not change me cause I have a balance of 0.07 pence

  How can I change my country when I have a balance that I can't buy anything with? It will not change me cause I have a balance of 0.07 pence

  Click here and ask the staff of the iTunes Store to zero the balance of your account.

  
  (142584)

• Why LabVIEW 2012 does not support USB-6009?

  Hi all

  I recently installed LabVIEW 2012 and DAQmx 9.6 (and also tried with latest version) in my PC with Windows 7. I have the version of Explorer 5.4 measure and automation. I'm working with hardware DAQ USB 6009. Everything seems compatible, but when I try to post data acquisition, it fails. However, I used to use this device (since I bought it last year) with the other PC that has the Windows XP operating system and the older version of LabVIEW 8.5.

  What can I do with LabVIEW 2012 is a message "a 88302 error has occurred." and "This could be an internal error."

  If someone has an idea to solve the problem, please let me know.

  devkotaj

  Hi devkotaj,

  The USB-6009 device should work perfectly on Windows 7 with the software you have listed. This looks like a problem of configuraiton of material for me.

  What are you trying to do when you receive the error 88302? This error usually indicates a corrupt DAQmx driver, which may result from the installation of several DAQmx versions on the same machine. Have you tried repairing your installation DAQmx? I could uninstall DAQmx from the Control Panel before installing the latest driver. You can see our procedure to reinstall or uninstall recommenedd here.

  I hope this helps!

  Andy C.

  Engineering applications

  National Instruments

• Email with attached video will not leave the Outbox... Cannot delete Email with the attached video.

  Email with attached video will not leave the Outbox... Cannot delete Email with the attached video.

  Check to work offline , and then it should delete.

• I have Windows Vista 32-bit, and auto racing seems to be disabled. Before I was able to insert a music cd and Autorun will go up, now it will not auto run open.

  Hello... I have Windows Vista 32-bit, and auto racing seems to be disabled. Before I was able to insert a music cd and Autorun will go up, now it will not auto run open. I looked in the help, but I found nothing on how to enable automatic execution. I speak not autoplay. I need assistance with automatic execution. Thank you!

  original title: AutoPlay

  Hello

  You can fix the error in reading auto/AutoRun.

  AutoRun/AutoPlay does not work when a CD/DVD is inserted
  http://vistasupport.MVPs.org/autorun_autoplay_don't_work_when_cddvd_is_inserted.htm

  AutoPlay - Autorun does not not under Vista
  http://www.mydigitallife.info/2008/01/14/autoplayautorun-not-working-or-missing-not-open-in-Windows-Vista/

  Troubleshoot AutoPlay
  http://windowshelp.Microsoft.com/Windows/en-us/help/3ab73757-6b67-4e3c-80b1-a75651c7a9451033.mspx

  CleanHandlers - AutoPlay Cleanup utility
  http://WindowsXP.MVPs.org/autoplayhandlers.htm

  See this and also scroll the messages below.

  How to change the settings for AutoPlay Vista
  http://www.Vistax64.com/tutorials/78021-AutoPlay-settings.html

  In the opposite direction might help.

  How to add entries customized AutoPlay in Windows Vista
  http://www.vista4beginners.com/add-custom-entries-to-Windows-Vista-AutoPlay

  I hope this helps.

  Rob Brown - 21/04/2012 Mariners vs Chicago - Phil Humber pitched a perfect game!

• Satellite P10 - sometimes it will not be running

  Hello

  I have a problem with my Toshiba Satellite P10 (bought in 2004).
  Sometimes it will not be running (no air conditioning, no battery) and sometimes the "Shut down" - the dialogue appears as if I had pressed the power button (really, I have not). Then, he died instantly, and I can't turn it on. Rarely turns without touching the power button a few minutes later.

  First, I assumed that the reason was the envelope, but recently the same problem appears despite the case open.

  Finally, I think that the problem is caused by a defective power controller chip. So, I read that I could at least try it deflexing by a hairdryer. This is why I would like to know where the power controller chip is located on the motherboard and how do I recognize it.

  Thanks in advance!

  Sebastian

  Hello

  [If your notebook won power t on sometimes you check out this article: what steps must be followed if your Toshiba laptop does not start? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=21]

  But I think that no one here can tell you where the power controller is replaced and if you can fix it yourself or not. Here he s only one user to user forum and if you have these technical questions should ask a technician for laptop (authorized service provider) for help. Guys have access to all the databases of Toshiba and can order spare parts Toshiba and it would be no problem for the guys to repair the device for you. ;)

• HP Officejet Pro 8500 A909 all: sorftware HP installation program will not stop running

  I recently uninstalled the software and drivers for my printer as suggested here.  I installed the drivers and software the latest complete features of the HP customer service.  Now the program will not stop running even after it has completely installed. The disc in the picture will not stop running and the window does not close.

  Hey @David146,

  Welcome to the Forums of HP Support!

  I see that you have some problems with the judgment of some installation of HP software to run on your PC of Windows 10. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

  1. On your PC, press CTRL, ALT and DEL keys at the same time.
  2. Click Start Task Manager.
  3. Select the HP software from the list.
  4. Click end task.

  Please let me know the results after following the above. If you are unable to resolve your problem, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• HP Envy 5530: Emits a light HP Envy 5530, but the printer will not be running

  Printer of opportunity, so no guarantee: it out of the box, plugged in and set up. I was able to connect wirelessly to my computer, but I don't have the right to ink cartridges. When the ink is right, I plugged it again. This time the printer power not on at all. The only thing that happens is that the signal power light briefly when the first powered. This isn't a loose thread, because I can only duplicate the symptom when connecting, not when moving or unplug the device. It isn't food, as I have him succeeded and get the same exact symptom. (PS, thanks for the power supply internal easy-to-swap!)

  Is it a kind of fashion 'sleep'? Any suggestions as to what this is. I am rather stuck with it since I bought the ink and an additional power supply, so I would like to address them. Help, please! Thank you!

  Hello @azvlr,

  Welcome to the Forums of HP Support!

  I understand you are having feeding problems with your used HP ENVY 5530 e-all-in-one printer. I see that you have already installed a new set of ink and replaced the internal power supply without result. Unfortunately at this time if a new power supply fails to solve the problem of flashing light output that the next step would be to use the printer.

  Please take a look at this paper Support HP "no power" to ensure that all steps are completed that follows: The HP printer will not be running or to respond when the power button is pressed

  The HP Envy 5530 is always a newly released product. Therefore, I highly recommend contact our telephone Support queue to explore additional options. If a replacement printer is necessary food and ink will not be wasted because they can be used in the replacement printer.

  HP Technical Support can be reached at the: 800-474-6836.

  If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  Worldwide contact HP

  Regardless of the status of the guarantee, please call and see what additional options can do for you. I wish you good luck!

• I tried to make a donation of $20, but will not accept your use of my personal details according to the rules of confidentiality year so my 20 bucks always in my pocket... what to do?

  tried to make a donation of $20, but will not accept your use of my personal details according to the rules of confidentiality year so my 20 bucks always in my pocket... what to do?

  Hello onjay, what is the part that bothers you? There are also several other ways to donate to mozilla than to go through the donation form: https://wiki.mozilla.org/Ways_to_Give

  and of course there are also non-financial ways you can contribute to mozilla:
  https://www.Mozilla.org/contribute/

• light silver will not let me use skydrive?

  When I want to send photos a deal appears pour download silverlight

  this case will not let me use skydrive do you have a solution thanks

  Hello
   
  Sorry, this forum is in English only.
   
  Please select the language icon at the bottom of this page English and select your native language from the popup list to view the forums in the language of your choice.
   
  If you can't find the language of your choice, support for international sites additional options can be found by clicking on the following link:
   
  http://support.Microsoft.com/common/international.aspx
   
  Concerning

• My screen saver is set on various photos & first, they light up but they will not stay running

  Original title: screen saver

  My screen saver is set on various photos & first, they light up but they will not stay running, the screen goes black & I do not turn off my computer. I want pictures to be constinltly running.

  Hi mel merrill,.

  1 when was the last time it was working fine?

  2. did you of recent changes on the computer?

  3. you receive an error message?

  4. do the computer in sleep mode?

  Method 1

  See the link below and run them the fixit tool available, check if it works.

  Windows Photo and slideshow problems

  http://support.Microsoft.com/mats/windows_photo_and_slideshow_diag/

  Method 2

  If the previous step fails, then you need download and install the updated drivers for the graphics card on the computer by visiting the manufacturer's Web site.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Black vista Windows 2009! system will not stay running...

  my windows system will not stay running and shuts down my computer after maybe running for 10-15 minutes... says also download 3 of 3, but instead of blocking it loads windows and then I have no sound what either.  also used windows open sometimes it always ask if I want to run windows normally know, my computer was repaired and when I came back started all this junk, please if someone can help me send me an email to * address email is removed from the privacy *. and thank you for your help.  Oh yes, it keeps asking me for my windows vista black 2009 key that I do not have...

  Black of Vista is NOT supported by Microsoft.

  Go to where you downloaded from / got fix for support.

  Mick Murphy - Microsoft partner

• Application that created on another computer will not connect usb-camera

  Hello, friends!

  I have a problem:

  My application that was created on my computer does not connect usb-camera on the other computer. I installed the LabView run-time engine and the runtime of vision on this computer but it is not useful :-(application is open, but the usb device not running.

  I'll be thanked for any help with this problem!

  Thank you very much!

  It's the solution to the problem:

  Solution:
  To run an exe containing NEITHER-IMAQ for USB functions, follow these steps on the computer that is running the EXE file:

  1. Install the following execution engines:
     • LabVIEW Run - time Engine (same version that was used to develop the VI)
     • Execution of vision engine (same version that was used to develop the VI)
       • One Vision single-seater deployment license is required for each computer target on which you install the runtime of the Vision. See all the related links for more details.
  2. Copy the following dll files to the directory on your development computer system, usually C:\Windows\system32 directory of your target machine system.
     • ImaqDirectShowDll.dll
     • ImaqDirectShowExport.dll
  3. Register at ImaqDirectShowExport.dll by the Windows Start Menu , click run. Type regsvr32 C:\WINDOWS\system32\ImaqDirectShowExport.dll, and then click OK to register the DLL.

     If you are on a different operating system or if the system folder is different and that you want to copy the path instead of typing all the way, you can drag the file to the command line at the prompt to run it, highlight the path, right-click and select it copy.  Paste in the command prompt by right-clicking and selecting window block.

     The ImaqDirectShowDll doesn't have to be registered.

  Once these steps are completed, and the DLL is registered successfully, your EXE will work.  Vision Acquisition software or Vision Development Module must be installed on the target computer.