exe of Wi - fi is missing from desktop on Windows this netbook

Similar Questions

• Missing Palm Desktop Applications - Windows Vista

  The "task list", "Agenda", "Memo Pad" and "Address book" are not available when I boot "Palm Desktop". In fact, everything is missing except for the 'media '. How can I solve this problem? I already reinstalled the application. My operating system is Windows Vista and I have a Palm TX.

  Thank you.

  Ok... What you have to do is right click on the new icon go to compatibility and check the run as admin.

  Message relates to: Palm Z22

• Installer Windows missing from my computer Windows Vista Home Basic

  Whenever I try to install a software, a window appears saying that my windows installer is missing on my computer and cannot install the software?  What should I do?

  I had to take my computer to Best Buy for repair.  He got like 200 virus on it.  It took 4 days to clean the virus, tune up and install Windows 7.  They couldn't fix with Windows Vista Home Basic on it because they did not have a disk and I don't have either.  When they have installed Windows 7, who took care of all my problems.

  Thanks for your help.

• Save a Word Doc from desktop in Windows Works word processor

  Last week, the ability to save a document, Word of Windows works as an Office Word Document (doc) has disappeared from the choices in the Save as drop down in my Windows program, it works.  The only options that remain now are works (wks), Rich Text, only text and HTML.  In the year and a half, I had this laptop and Windows Vista with works that I was always able to save as doc when I send a document to those who have the office window--suddenly it is no longer possible.  I looked everywhere to see if there is an option where I can add the 'doc' save option back without success.  Any help would be greatly appreciated.  Thanks in advance.

  http://people.WKU.edu/rich.Patterson/works.htm

  Above is the tip on how to do it.

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.works.win&cat=en_us_9804e2ac-c762-44C9-9c6f-90e45f32d772&lang=en&CR=us

  Discussions in microsoft.public.works.win

  They will help you with your questions of work when repost you in the above works Newsgroup.

  See you soon.

  Mick Murphy - Microsoft partner

• "Import pictures and videos using Windows Live Photo Gallery" option is missing from AutoPlay in Windows 7 64 bit

  I saw this question and answer:

  http://social.answers.Microsoft.com/forums/en-us/w7files/thread/5c567ab1-208D-400D-9bce-0598d43a0574

  but I think I have a more serious problem. In Windows 7 RC, when I plugged in my camera or insert a memory card, I could choose "import pictures and videos using Windows Live Photo Gallery", but in my new installation of Windows 7 RTM, on which I have installed Windows Live Photo Gallery, there is no "Import pictures and videos using Windows Live Photo Gallery" option allotted me in the list of Control Panel AutoPlay or on the AutoPlay pop-up that appears when I plug in a camera.

  How can I get that back? Without this option, I have to go through the manual steps tedious to execute WLPG and manually choose to import from there and say what is my camera. It was much better under Vista and Win7RC when I had the simple auto play option.

  My PC is running Windows 7 Professional 64-bit, but I also installed WLPG on two new computers Windows 7 Home Premium 64-bit my parents, and they have exactly the same problem. Is this a known bug? Is there a solution?

  Thanks in advance for any help you can offer!

  Hello bitoclass,

  Thank you for visiting the Microsoft answers Site.

  The Windows Live Photo Gallery import Option is not available from the AutoPlay on x 64 systems. Try the underside of work around to see this option.

  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Windows.live.Photogallery&TID=40220862-cb07-4183-97D4-4c597ea12dac&cat=&lang=&CR=&SLOC=&p=1

  http://support.Microsoft.com/kb/967904

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

  I hope this information is useful.

  Thank you

• MSVCR80.dll is missing from my computer - cannot sync itunes iphone to desktop or make updates to itunes and downloads

  Now, I get a message feared after starting a computer running Windows 7:

  System error APS Daemon.exe program cannot start because MSVCR80.dll is missing on my computer.

  Can someone direct me to an official download from Microsoft to fix this problem?

  No longer can I sync my iphone with my desktop itunes itunes nor do itunes & updates downloads.

  Pete Davis 58

  Hello

  Uninstall everything according to the instructions from Apple:

  «Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7»

  http://support.Apple.com/kb/HT1923

  It is also the same list of what to remove what is in the link above from Apple:

  http://pcsupport.about.com/od/findbyerrormessage/a/MSVCR80-DLL-not-found-missing-error.htm

  Or try this program to remove it:

  http://www.revouninstaller.com/revo_uninstaller_free_download.html

  Then, download and save the iTunes on the desktop > then right click > select run as administrator to install.

  If the advice already given does not, please contact Apple for assistance.

  "Not to install iTunes or QuickTime for Windows"

  http://support.Apple.com/kb/HT1926

  "iTunes support-how to use iTunes.

  http://www.Apple.com/support/iTunes/

  "Contact iTunes Support.

  http://www.Apple.com/support/iTunes/contact/

  Or ask in the community Apple iTunes:

  https://discussions.Apple.com/community/iTunes

  @@@@@@@@@@@@@@@@@@@@@@@@@@

  iPhone is also an Apple product,

  You will have to ask either Apple Support or in their Discussion Forums if above does not solve your problems of iTunes.

  "iOS: Troubleshooting update and restore issues.

  Symptoms

  Follow these steps if you receive an error or a warning message when you try to update or restore your iPhone, iPad or iPod touch via iTunes.

  http://support.Apple.com/kb/TS1275

  iOS: unable to update or restore

  Follow these steps to perform a restore from recovery mode on your iPhone, iPad or iPod touch.

  http://support.Apple.com/kb/ht1808?viewlocale=de_DE

  "iPhone Support.

  http://www.Apple.com/support/iPhone/contact/

  "Apple support communities."

  https://discussions.Apple.com/community/iPhone

  See you soon.

• Error message: "CARDS.dll is missing from your computer", when reinstalling Freecell.exe

  Original title: Reinstall Freecell.exe and CARDS.dll

  I permanently deleted freecell.exe from my computer at home about 3 months ago since I played him too much. [It is not in the Recycle Bin, but permanently deleted.]

  It may be slightly addictive, see.

  Now I want that he return!

  I copied freecell.exe of my employer's computer to my home computer, but whenever I click on the icon, I get the message error "CARDS.dll is missing from your computer."

  I looked for where I could get this dll on the net file, for example, Microsoft, but only get directed to sites who want to scan my registry until they give me the download, and I'm just wary of them and their peers.

  I guess my basic question is: how to find a good copy of the CARDS.dll file and put it in the right place on my home computer.

  I have my original purchase recovery discs, but I hesitate to start with there rooting.

  Thanks in advance.

  Tom

  Hi Tom,

  1 Windows operating system you are using?

  Step 1:

  You can try to run a SFC scan and check if it helps:

  You try to run a SFC scan to check all corrupted files.

  You can read the following article to launch the SFC scan:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Step 2:

  You can add or remove games from windows default Windows features and check if it helps. To do this, follow the steps below:

  a. Click Start, type optionalfeatures.exe and press ENTER.

  b. you will get destop or off the screen on Windows features.

  c. to disable a function to clear the checkbox on games, then restart the computer.

  For more information, visit the link given below:

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

  If you use Windows XP, then read the following article:

  How do I add or remove games in Windows XP

  http://support.Microsoft.com/kb/307768

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• MSIMN.exe is missing from the Outlook Express folder. I have XP SP3 and IE 8.

  MSIMN.exe is missing from the Outlook Express folder which has 11 files it contains.  OE has never been installed.   I have XP Pro SP 3 IE 8.

  I bought a Dell 5 years computer and it works well. I have no e-mail program, and none has ever been installed. It seems that I only have Outlook (not installed) but I really want/need from OE 6.   MSIMN.exe is XP and is not downloadable from Ms.  Help!

  It may be a hidden file.  Make sure you have these active under control panel | Folder options | View.
   
  And go to start | Run and type (or copy and paste):
   
  "C:\program files\outlook express\msimn.exe".
   
  and including the quotes.
   
  Steve
   
  wrote in message News: * e-mail address is removed from the privacy *...

  MSIMN.exe is missing from the Outlook Express folder which has 11 files it contains.  OE has never been installed.   I have XP Pro SP 3 IE 8.

  I bought a Dell 5 years computer and it works well. I have no e-mail program, and none has ever been installed. It seems that I only have Outlook (not installed) but I really want/need from OE 6.   MSIMN.exe is XP and is not downloadable from Ms.  Help!

• Windows 8 does not not log on screen, all black dekstop, explorer.exe, disc missing from the Task Manager

  Hey. I am a newbie in this forum. And I really like to make my PC more 'me' even though my parents and brother told me that my PC did not differ from how difficult. But, I still like my PC... ^ ^
  But my PC encountered a problem in my birthday (March 8, ehehe just FYI). Its a terrible birthday gift: (...) Oh, there. Its all started when I accidentally install a skin pack or win 7 in my PC 8 victory. There is nothing wrong with installing proggress except a notification which inform on win 7 Starter has not installed correctly. :( Well, I ignored, first. But after I have it reboot, my dekstop went all black but it still can open the Task Manager. And then I try the system restore. It did not work properly. The only thing made worse. Somehow, my "(le seul compte dans mon PC) DELETED account." In fact, the log on screen consist only of the ease of access and power button with backgorund optomistic. Where are the data of the user, I mean a place where we inserted the password? XC its make me super bad mood. And after some restoration system with various restore points, I restarted my PC in safe mode successfully. Yippie, its worked perfectly in safe mode. I created a new account in safe mode. I thought that my problem more but no. and the bad news is that there is only one user account (a new one) in the journal on the screen! It'll be better I have the new account very well work, but it didn't! The dekstop always all black with no taskbar and it's the same problem as the first.
  I am not really confusing. What should I do? Should I remove a skin pack safe mode? or reinstall win 8 in PC COUNTER? Or do something that you already know the guy?
  Help me. I am so irritated by this problem. In any case, I want to ask one last thing, you prefer something after me or just think it was a charitable organization? Well, I just want to know. And I'll do my best to show my appreciation once you help me. I am so TROUBLED even if today is my birthday! I want a big anniversary with neither party. But its seems no big birthday. Please, help me. His will probably be my MOST BEAUTIFUL GIFT to a person who I know in internet. If you need something detailed about my problem, ask me. I need your response. :") SURE ME MY CRAZY MOM, IF SHE KNEW IF I AM WRONG IN MY PC AGAIN.

  Oh, there. The explorer.exe does not start in normal mode, but it works fine in safe mode. Also, I discovered that the disc is missing from the Task Manager. :) Help?

  Wish you a very happy birthday, Damaris.

  Of course, I can understand the situation you're in right now, and it's a shame. I will be happy to answer your query and try my best to offer my help as a gift for your birthday.

  Let me ask you;

  1. What happened when you tried the system restore?
  2. What was the last time that the computer worked well?
  3. What security software is installed on the computer?
  4. Remember to no particular change in the computer before the show?

  The issue may be due to any dispute of third party software, virus or any system or missing files / corruption. Let's try the methods below and check the status.

  Method 1: Since you are able to start the computer in safe mode without any mistake, I you suggest to start the computer in safe mode and then perform the clean boot to avoid software conflicts.

  Step 1: Start the computer in safe mode (as you are able to start the computer in safe mode with the steps you tried).

  Step 2: Perform the clean boot

  To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  How to perform a clean boot in Windows

  Note: see 'How do I reset the computer to start normally after a boot minimum troubleshooting' to reset the computer starts normally after troubleshooting.

  Method 2: Run Microsoft Safety Scanner

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  Microsoft safety scanner

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note: Data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

  Method 3: Run the tool File Checker system in case where any system files are missing or corrupted.

  System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files.

  Enter in the right edge of the screen and then click on Search. Or, if you use a mouse, point to the corner bottom right of the screen, then click on Search. Type the command prompt in the Search box, right click invite, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  At the command prompt, type the following command and press ENTER:

  sfc/scannow

  Note: Not close this command prompt window until the audit is 100% full. The results of the analysis will be posted when this process is completed.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• my computer has sent me a message system error dthtml.exe what I would do. or the computer denies me ijl15.dll is missing from my system

  My computer told me that is missing on my system or systems error dthtml.exe ijl15.dll.

  Thanks, Kassie

  Hi Kassie,

  (1) what version of Windows are you using?

  (2) what is the complete error message you receive?

  (3) when exactly you get this error message?

  If you run Windows Vista or Windows 7 on the computer SFC scan and then executed.

  If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

• "Send to desktop" missing from the context menu of Explorer

  I have a new install of Windows 7 pro, but I worked with her for a few weeks for some programs to run. I just realized that I can't create a shortcut for the Office in the normal way, with a right click and "send to"---> desk. "Send to" is present in the first Panel to right click, but the "office" is missing from the Panel following if you selected "send to."

  I created another profile and the 'office' is, as appropriate, when above sequence is started.

  What could be wrong, or more importantly, how can it be corrected?

  I see another post in this group with instructions to create a new profile and copy that to her. I can do that, of course, but when I do there always seems to be something missing, so if there is one solution (other than a restaurant), I would be happy to hear about it.

  Thanks a lot for the suggestions, links, explanations, etc.

  Jack

  How to remove and restore the value default Windows 7 send to Menu items
  http://www.SevenForums.com/tutorials/45421-send-context-menu-remove-restore-default-items.html
   

• Icon 'Remove hardware safely' is missing from the notification area

  I just reinstalled Win7 X 64 business but found that the icon 'Remove hardware safely' is missing from the notification area when I plug a USB key or external HARD drive (they don't work either by the way, I can view files in them no problem), I tried the solution of workaround suggested in http://answers.microsoft.com/en-us/windows/forum/windows_7-desktop/safely-remove-hardware-icon-missing-and-cant-eject/e9fda0a2-c308-4853-bf1d-a3926ff0fcd1?page=1&tm=1299855382970#footer , but it does not resolve the issue, I don't see the USB stick or external HARD disk in the dialog 'remove hardware safely '. The only way I can eject a USB device is click on the drive in windows Explorer and select "eject" while even "eject" is not available for an external HARD drive

  Does anyone know how to troubleshoot it?

  Hello

  See if they help you:

  References to Vista also apply to Windows 7.

  Start - type in the search-> CMD bar find top - make a right click on - RUN AS ADMIN

  (You can copy and paste the line below to the command prompt - it is case sensitive)

  Rundll32.exe shell32.dll, Control_RunDLL hotplug.dll

  Press enter

  Remove the icon of USB device missing from the taskbar
  http://www.techf5.com/archives/safely-remove-USB-Hardware-icon-missing-from-taskbar/

  Restore missing or disappeared safely remove hardware icon
  http://www.Raymond.CC/blog/archives/2007/12/30/restore-missing-or-disappeared-safely-remove-hardware-icon/

  Remove device icon lost
  http://en.kioskea.NET/FAQ/Sujet-2501-safely-remove-hardware-icon-lost

  --------------------------------------------------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ======================================

  If necessary check the latter:

  How can I remove hardware safely in Windows 7? (via the shortcut)
  http://windows7themes.NET/how-do-i-safely-remove-hardware-in-Windows-7-via-shortcut.html

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

• Live Preview is open on the tab of Google Chrome, but Chrome is missing from their user profile.

  Hello

  So, to cut a long story short. I have Google Chrome Google Chrome & m32 Canary installed on my desktop.

  I tried to test "Live Preview" and found that when you click on the 'light' bolt I would be presented with a new window of Google Chrome Canary, and its associated profile (extensions and everything) would be absent.
  Preview live would work for a few seconds, until what I was greeted with this error message:

  

  I thought it was obviously a problem with edge Code CC opens the wrong browser as my default browser is Google Chrome (stable M32); not to mention the Canary Islands can only be activated in the default browser.

  So, besides persual I found this convenient link on the github media: https://github.com/Adobe/brackets/wiki/troubleshooting#wiki-check-Windows-registry

  Check the registry to see what settings have been applied, I found that the Canaries (SxS) has been defined as the default chrome.exe launcher?

  

  As well, this is obviously not "normal." and if it is a bug on the behalf of the chrome team, I have no idea, but I changed the default paths to Google Chrome Stable (M32)

  

  Back on Board Code CC, I went and attempted to open the default get startred with the live preview html file. It works as expected and I don't get the error previous edge Code CC threw on the impossibility to load the development page - except that it opens a tab of Google Chrome Stable (M32) skeleton, which is missing from its partner (singular only) user profile. The other matter outside the missing user profile; is that I get now that Google Chrome Stable (M32) error:

  

  Help with this bug would be greatly appreciated.

  Media uses a custom at the launch of Chrome profile so that it is not inconsistent with all the other things that you can run in Chrome.

  The bad news is that you will need to install all the extensions you want to use with the media in the new custom profile. The good news is that it is all being cached, but only do it once.

  To find the cache for this profile, use help > show the Extensions folder and then go up 1 level to the media folder. Custom profile data is stored in the live dev-profile folder.

  Hope this helps,

  Randy

• Sections stock scanner & printer preference is missing from the Solutions Center

  I just bought a 6510 Photosmart e-all-in-one. I had no problem setting up on my laptop and set it up easily on an old desktop PC. However, I noticed in the center of HP Solutions on the laptop that two sections are missing from this - Actions "Scan" and "Printer Preferences". The only sections appearing on the page of the laptop are connected solutions, commercial Web resources, help & Support, then disclosures of personal information. However, the missing sections both appear on center of my Solutions desktop PC. How can I get they appear on Solutions Center the laptop?

  The Solutions Center I want to talk about is the page that appears when I click on all programs / HP / series Photosmart HP 6510 / HP Photosmart 6510 series or the icon of the printer.

  Desktop PC - Windows 7 Professional (32-bit)

  Laptop - Windows 7 Home Premium (64-bit)

  EDIT: I completely rewrote this post, including the title I used the terminology wrong so I hope that makes more sense now and I can get an answer to my problem. Maybe even an expert!

  Apologies in advance to the moderators if I did the wrong thing by rewriting, sorry.

  Due to a lot of things in my life I never had to call HP. However yesterday I did something stupid and had to reformat my hard drive. As a result, I had a clean slate to work with, and last night I was finally able to install the missing stock Scanner and Printer preferences. What I noticed during installation this time, was that I had an additional question that I could choose to install from the full functionality driver, called Smart something thing-or-other (sorry, can't remember title), which certainly is not in the list before (this is the same list that includes HP Photo Creations). I don't know why that did not exist before, but maybe it could be that I installed the printer in order to deparaments of the one below. He would have just because the news about my previous printer, which I had uninstalled it, was somehow still on my PC. Was the order I completed the installation in this time - 1) go to devices and printers, add printer, click the Photosmart series 6510 with the URL contains only numbers & points, and NOT the one with http / / in front of him (which is the link to the eprint centre) 2) download the driver full features on the site of HP , launched the present and choose what to install. And voila!

• Stop and run option is missing from the Start Menu.

  Original title: Administrator group of experts.

  On the Admin Panel when I want to close I normally press start and the "closing". However the button turn off disappeared and only shows button "quit". In addition the 'run' button is gone as well. How to restore it back to normal?

  It will help with these situations... and, this lesson, I've added a few new commands to my answer of registry file generic copy/paste for these kinds of things:

  If you see things like this:

  You do not have sufficient security privileges to restore your system.
  The System Restore tab is missing from the my computer properties.
  System Restore has been disabled by group policy.  To turn on system restore, contact your domain administrator.
  The System Restore tab is available, but the turn off System Restore (disabled by Group Policy) box is grayed out.
  The task manager has been disabled by your system administrator.
  The registry editor has been disabled by your system administrator.
  The task manager has been disabled by group policy.
  The registry editor has been disabled by group policy.
  The command prompt has been disabled by your administrator.  Press a key to continue...

  The usual advice are something in the sense of "something has been disabled in the group policy...". ", and it is probably true that something has been disabled, but you know what something is and what it takes to do about it.

  If you are using XP Home Edition, you will get away with advice to use the Group Policy Editor, because there is no Group Policy Editor in XP Home and that really doesn't tell you where to look in group policy, even if you run the Group Policy Editor.

  You need a complete solution that works for all versions of XP and requires no hunting around in the Group Policy Editor or registry to find where things are that have been disabled.

  Unless you have disabled these things on purpose, chances are good that your system has a malware infection.  The malware knows what tools you use to try to find and remove, for the malware disables the things you are more likely to consume and prevents them from running if you can't find the malware and remove it.

  If your system has this kind of affliction, all malicious software tools you currently use or have used failed to protect your system so that you can expand your horizons malware detection and prevention to prevent these kinds of afflictions in the first place.

  The malware will be happy you trick into thinking that you need to so something drastic to fix your system - as a facility repair, system restore point or a total reinstallation of XP.  This is what it would be like you, but these measures are not necessary.

  You must solve the immediate problem of the tools does not, then scan your system for malware when you are finished.

  No matter what kind of malware you've used analytical tools, they are unlikely to solve this problem, because they cannot tell if the changes made to your system have been on purpose (you or an administrator who makes them) or some malware changed them, so the analysis tools will let these things alone (it's usually a good thing).

  If your system is afflicted in this way, there are probably other things that also do not work - like the registry editor, System Restore and the command prompt, so fix them all at once even if you have not discovered they are broken again.

  These commands from registry removes the registry entries that are stop opening programs.  Although the registry entries do not exist, these commands are safe to run and will work for all versions of XP.

  Before making any changes to your registry, back up the registry with this free and popular tool:

  http://www.SnapFiles.com/get/ERUNT.html

  Open Notepad to create a new text file:

  Click Start, run and enter in the box:

  notebook

  Click OK to open a new Notepad file.

  Copy and paste the following lines of text into the new Notepad file.

  Windows Registry Editor Version 5.00

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System]
  "DisableTaskMgr" = -.
  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System]
  "DisableRegistryTools" = -.
  [HKEY_CURRENT_USER\Software\Policies\Microsoft\Windows\System]
  "DisableCMD" = -.
  [HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionPoliciesSystem\\\]
  "DisableTaskMgr" = -.
  [HKEY_USERS\.default\Software\Microsoft\Windows\CurrentVersion\Policies\System]
  "DisableTaskMgr" = -.
  [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon]
  "DisableCAD" = DWORD: 00000000
  [HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows NT\SystemRestore]
  "DisableConfig" = -.
  [HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows NT\SystemRestore]
  "DisableSR" = -.
  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoRun" = -.
  [HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoRun" = -.
  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoClose" = -.
  [HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoClose" = -.
  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoSetTaskbar" = -.

  Save the new text file with extension .reg on your desktop or somewhere you can remember with a name you can remember, something like:

  enableit.reg

  After you save the file, close Notepad.

  Locate the file enableit.reg on your desktop and double-click it.

  Alternatively, you can right-click on the enableit.reg file, choose open with... and select the registry editor.

  Answer in the affirmative to the question... Are you sure you want to add the information in the registry?

  You should then see a message that information has been registered in the register.

  Reboot your system and test.

  You can delete the enableit.reg file when you are finished.

  If the registry editor has also been disabled, we first fix (not a problem).