Missing Palm Desktop Applications - Windows Vista

Similar Questions

• I have a desktop with Windows Vista. Many times, the screen is the gel with an error massage "video Mode not supported". What could be the problem and the solution. ?

  I have a desktop with Windows Vista. Many times, the screen is the gel with an error massage "video Mode not supported". What could be the problem and the solution. ?

  Hi Izzy Nagar,

  ·         Exactly when you receive this error message?

  ·         Did you do changes on the computer before the show?

  ·         Do you have any extended monitor connected to the computer in the past or at the present time?

  Follow the suggestions below for a possible solution:

  Method 1: You can try to reduce the resolution of the screen (lower), then check if the message still appears.

  Check also if the refresh rate of the monitor is set correctly and check the manual of the monitor for assistance.

  Ways to improve display quality

  http://Windows.Microsoft.com/en-us/Windows-Vista/ways-to-improve-display-quality

   

  Flicker of the correct monitor (refresh rate)

  http://Windows.Microsoft.com/en-us/Windows-Vista/correct-monitor-flicker-refresh-rate

  Method 2: Use the option ' enable video low resolution (640 × 480) "start, then update your video card driver and check if the problem still persists.

  a. click the Start button, click the arrow next to Shut Down and then click on restart.

  b. do one of the following:

  ·         If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  ·         If your computer has more than one operating system, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

  c. on the Advanced Boot Options screen, use the arrow keys to select activate video low resolution (640 × 480) and press ENTER.

  d. connect to your computer with an account of a user who has administrator rights.

  e. If you can see your desktop, there is a problem with your video card. Try to update your video card driver. For more information, see the article:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

   

  I hope this helps.

• Networking a laptop 64 bit Windows 7 with a desktop computer Windows Vista 64-bit

  I have a Dell desktop running 64-bit Windows Vista with a USB connected HP Photosmart printer operating system.  My wife used to have a laptop with an XP operating system and we have had no problem sharing the printer.  Now she has a laptop (HP) laptop to Windows 7 64 bit and fails to print.

  His laptop is connected wireless to Verizon FIOS router (wireless-g, I think).  I am connected by ethernet.

  If I look at a map of the comprehensive network of my Vista PC I can see his laptop and explore appropriate records of (public) level on his hard drive.   Sharing my Vista PC and are discovery options: network discovery:; File sharing:. Public folder sharing:; Printer sharing:; Password protected sharing: Off; The media sharing: Off.  My Vista shows the home network as a WORKING group.

  I use McAfee SecurityCenter and when I open the McAfee network map it also shows my wife's cell phone with its IP address.

  On my wife's cell phone two PCs appear on the map of the comprehensive network of the window and it shows my PC IPv4, IPv6 and MAC address, but if I try to 'Open' from my PC to the icon on the map, I get an error message suggesting I be spelled the name wrong or there is a network problem (error code 0 x 80070035 the network path was not found).  I ran the diagnostic of the error dialog box and he suggested to "make sure that the device allows incoming connections for printing and file sharing", the windows firewall settings.  Its network card qualifies to the network TPEN1, identity, assigned to the Verizon router. It shows his laptop connected by a dotted line (wireless)? to TPEN1 which is connected to a switch.  My PC is also connected to the switch which in turn is connected by a bridge to the Internet.  Options advanced sharing his PC for the home or work (current profile) are set on: turn on the discovery network. Enable file sharing and printing; Turn on sharing so anyone with network access can read and write files in public folders;  Media streaming is disabled; Use 128-bit encryption to protect file sharing connections (recommended); Disable password protected sharing;  Use the user accounts and passwords to connect to other computers.

  Its Norton Internet Security Network security map shows my PC as being in line with trust to full trust level.  It also shows the Swith and 2 generic devices with Shared Trust.

  So... anyone have any suggestions?

  Hello

  Maybe this can help.

  - ---------------------
  

  This message looks like a long history because I don't know what is the level of knowledge of the user, and what has already been done.

  The info goes through the motions of the configuration and verify most of the common aspects of the functionality of Windows OS' LAN.

  ----------------------

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Since you have a network with Win 7 and the other version of Windows, you must configure Windows 7 as work network.

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If necessary check specifically Permission/security settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  Please note that the users and groups listed on the screen shoot are just an example. Your list will focus on how your system is configured.

  ---------------------

  You should consider that many times the final solution could involve total uninstall of the 3rd party security Suits.

  In this case, you can be set at the same level with installing Microsoft Security Essentials which are used in the applications of a native Vista/Win 7 firewall and AntiVirus/AntiSpyware.

  http://www.Microsoft.com/Security_Essentials/

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Installation of Palm Desktop on Windows 7

  Initially, I tried to install from the CD that came with my Palm, but when he could not find the device drivers for my Palm Centro, which I've had for over a year, I uninstalled Palm Desktop, downloaded the latest version on the site and tried to reinstall again.  In both cases, the device drivers cannot be found and I don't know what to do, this is why I am contacting you today.  Please help - I hate having to get rid of my Palm and go to iPhone just because you guys are not all compatible with Windows 7.

  Hello OntarioWineDiva, welcome to the Palm support community.

  Your question gets asked on a daily basis here, so we have a 'sticky post' set up to offer a solution.

  Please see the posts at the top of this section (with gray background).  There is a heading "instructions of Win7 and Vista HotSync here...". »

  WyreNut

• Installer Windows missing from my computer Windows Vista Home Basic

  Whenever I try to install a software, a window appears saying that my windows installer is missing on my computer and cannot install the software?  What should I do?

  I had to take my computer to Best Buy for repair.  He got like 200 virus on it.  It took 4 days to clean the virus, tune up and install Windows 7.  They couldn't fix with Windows Vista Home Basic on it because they did not have a disk and I don't have either.  When they have installed Windows 7, who took care of all my problems.

  Thanks for your help.

• How do we install a page active desktop, my windows vista, my xp and windows 7, as all three, I need help please

  I really need to insall a active wallpaper but don't know how to do in this regard, I have a XP, Vista and Windows7 computer, can someone tell me how to on this subject, I really want to put on one of my creations, but need help.

  I really need to insall a active wallpaper but don't know how to do in this regard, I have a XP, Vista and Windows7 computer, can someone tell me how to on this subject, I really want to put on one of my creations, but need help.

  Hey jennyanderson99

  as you ask specifically about active desktop, here's what it is, or in your case what she was before vista released

  Active Desktop is a feature of Microsoft Internet Explorer 4.0 Windows Desktop Update that allows the user to add optional contentHTML on the Office, as well as a few other features. This feature was designed to be installed on theWindows 95 operating system then in force. It was also included inWindows 98 and later Windows operating systems up toWindows Vista, where the feature wasdiscontinued. This corresponds to the version ofInternet Explorer 4.0 to 6.x, but not Internet Explorer 7.

  HTML users can add in place of the ordinary wallpaper as independent resizable desktop items. Items available online can be regularly updated and synchronized so that users can stay up-to-date without visiting the site in their browser.

  Active Desktop works as the technology of desktop widget that allows users to add customized their desktop information.

  Here is information for active desktop for xp

  http://www.ehow.com/how_6366085_make-XP-Active-Desktop.html

  information from wikipedia about active desktop are less than

  http://en.Wikipedia.org/wiki/Active_Desktop

  The introduction of the Active Desktop brand attempt by Microsoft to take advantage of the ephemeral trendtechnology push led by PointCast. Active Desktop has imposed a number of "channels" ofdesktop computers that provided information updated continuously, such as headlines and stock quotes, without the user to open aWeb browser of the user.

  Active Desktop debuted during the publication of 1997 of Internet Explorer 4.0 for Windows 95 and Windows NT 4.0, install it as a feature of theWindows Desktop Update offered to users during the upgrade option. The Windows desktop update is commonly referred to as (bad) Active Desktop itself, but it is actually a whole Windows shell to level v4.0 to v4.71, or v4.72, with many changes in the Windows interface, resulting in a level look and features almost indistinguishable from the Windows 98, then again to-be-released. Features include the ability to allow uppercase filenames (the old v4.0 Desktop would forcibly filenames in title case uppercase), the dynamic tracking file selection click configurable, customizable by HTML, QuickLaunch folder display settings mini buttons on the taskbar next to the Start button, improved to Start Menu drag and drop re-organization of the elements and menus contextual click right to rename point etc. With the update, Windows Explorer now has an address bar in Internet addresses that can be entered and driven seamlessly.

  Active Desktop was widely regarded as a failure, with one of the main problems being its use high system and reduction of the stability of the system resources. Although not used^{[citation needed]}, the availability of Active Desktop was decisive for the legal argument Microsoft in antitrust case of United States v. Microsoft , that Internet Explorer has a feature of Windows, not a separate product.

  Later use

  Windows Vista has replaced the Active Desktop withWindows Sidebar (now called Gadgets Windows Desktop fromWindows 7), which also allows the components to add to the desktop. Windows XP is the newest operating system from Microsoft to support Active Desktop. It seems that the 64 bit version of Windows XP supports is no longer Active Desktop. It provides always the option to display Web pages and channels built with MicrosoftChannel Definition Format (CDF) on the desktop.

  Display HTML features are now mainly used for creating wallpapers originals and adding the fields of desktop search. For example, a user can copy the following code to display the search box of Wikipedia on the desktop:

  Walter, the time zone traveller

• network printing from the desktop in Windows Vista and Windows 7 laptop

  Original title: network printing

  I have Vista Home running on a desktop computer with a printer. I have a laptop with W 7 (64-bit) and to print on a desktop printer.  I have configured the settings to allow the sharing of files on the vista machine and now in this network sharing Center it is written after the sharing printers and public folder sharing (password required).  Which passwords they are referring to and how do I enter them?

  I decided to bite the bullet and updated desktop for Windows 7.  Now, portable and office are on the same operating system.  Then I used the home network.  The network was a snap to set up and works perfectly.

• Desktop icons Windows Vista setting the terms

  Hello

  This is a silly question tiny but it's bugging me. I like to keep the shortcut icons on my desktop to allow a quick selection or programs. Recently, I noticed that after a reboot, the icons available is blurred.
  I want to do is organize the icons in one, for me, in a logical way and fix then this arrangement as well as reboot icons are arranged in the same way. I searched everywhere but may not know how to do this. I know that this must be possible because this interference is just a recent phenomenon and I know I must have done something to bring.
  I thank anyone in advance, can provide assistance with this.

  Use this tutorial:

  http://www.howtogeek.com/HOWTO/Windows-Vista/save-and-restore-desktop-icon-layout-in-Windows-Vista/

  It is the only method that keeps shortcuts and the desktop icons where you want without have moved them or rearranged themselves to restarting.

• How can I reset Windows Media Player to use songs on my external backup drive instead or in addition to the songs on my desktop with Windows Vista Edition basic hard drive family?

  How can I reset the Player Windows Media in Windows Vista Home Basic to use the songs on my external backup drive instead of (or in addition to) the songs on my desktop hard drive?  Currently, the Media Player library indicates that the hard drive (C:\) is my only option of disks to use for sources of songs.

  Basically, I want to have Media Player external drive for all the songs from research and build his library on this disc instead of on the C:\ drive.
  My problem is that the songs are hogging too much space on my hard drive, so I want to move to my external drive to backup instead, but Media Player will not access it.  I saw an option in Media Player to add a song to a different drive to the library whenever I play a song of this player, but that would require me to play all the songs moved one at a time, which is not practical, and which would not solve my problem because Media Player could still be maintaining the library on my HDD to say.
  Any ideas?
  Thank you.

  Hello

  See the steps in the following article on how to manage the music library.

  Add items to the Windows Media Player library.

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-items-to-the-Windows-Media-Player-library

• Remote Desktop in windows vista home edition isn't here

  OK, I have a friend on the seas and the home edition of windows vista does not have active Office on his computer, and she needs help with this problem. An admin in our play group and she needs to remote desktop to help us. the research that we have done so far says that this is not enabled in the copies of the home edition. This I ask for is there a way to enable that in its copy, and what can we do about it? I ask you to find additional information for it, but I can put him in touch with yall on here too. We need a fix for this, or a way to fix and how to do it. If its possible? all welcome solutions. Thank you!

  Chris

  Use teamviewer instead. It is easier. Simply install on both, then the other person gives you the ID and the password to connect

• remote desktop Connection Windows Vista PCs

  I have a network with windows vista home PC and I can send an invitation from one computer to another, and then use the work of remote office very well. There is windows 2000 Server and can connect to it very well by browsing the network or by typing the name of the server. I can't connect them to each other with the name of the computer or IP address and the network browse will not see them. I have turn on remote desktop support and also turn on and under windows firewall I have checked windows remote management. Spyspweeper is my anti virus / anti spy software

  Hello Coloradogeekboy,

  Thank you for visiting the Microsoft answers community site. The question you have posted is related to Windows Vista in aServer environment and would be better suited to the TechNet community. Please visit the link below to find a community that will support what ask you

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  If you use a Windows Server, you can also post here:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  Hope this helps J

  Adam
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• CC desktop application (windows) shows the latest versions of the CC apps for installation. How should I do?

  I was CC member since the beginning; About 6 months ago the desktop app CC on my main desktop PC stopped showing the latest versions of most of the applications (for example, Photoshop, Illustrator, etc., didn't show that the version "CS") and stopped giving me alerts of updates. It still works fine on my (much lower spec) laptop.

  I tried various fixes (for example to remove the file from opm.db to ' AppData/Local/adobe/OODB) but it has not solved the problem. I had a work around (download files to install from the Adobe website and use the function 'check updates' applications).

  With the recent update and the release of versions "(2014)", these works no longer function wrapper. The application of CC desktop always, shows of most of today's applications, and trying to download applications from the site Web Adobe sends me to the CC desktop application, which then isn't, download the new application.

  I foolishly thought that a completely clean install might help, so I uninstalled all my Adobe apps, ran the 'clean' app, & tried... more things have gone from bad to worse, because I can't even older versions (pre-'2014 ') to download to install desktop applications.

  My immediate problem is not to have a working version of Photoshop on my main PC - version "CS" is put at my disposal through the application of office of CC, but not the 'CC' or ' CC (2014) ' versions.

  The specifications of the PC are superior to the minimum specification for the 'CC' apps, so I don't think that's the problem.

  -Win 7 Pro SP 1, 64 - bit

  -Intel i7 - 3770K (3.5 Ghz quad core)

  -16 GB OF RAM

  -650 GB of free disk space

  -etc.

  Welcomed any ideas on how to solve it; I'm at my wits end...

  Ian

  Just had a very productive discussion with the support team, which was quickly diagnosed and solved the problem. The application of CC desktop was running in compatibility mode 'Vista' for some weird reason; changed that out & it now works as expected.

  Many thanks to Adobe support team to solve my problem!

  Ian

• MISSING OPERATING SYSTEMS. WINDOWS VISTA. NO RECOVERY DISK.

  My daughter has an Acer laptop and when she tried to do a system restore in the Accessories folder, the computer turns off. When she started her phone again, it says lack of operating system. It is not a factory recovery disc and is not able to order one because they have abandoned the recovery disk for your model computer. We tried to recover with just a disk of Windows Vista, but when type us the product key in the box, it says something like "invalid key. But it is the right key. What can we do to recover his computer? Help, please!

  My daughter has an Acer laptop and when she tried to do a system restore in the Accessories folder, the computer turns off. When she started her phone again, it says lack of operating system. It is not a factory recovery disc and is not able to order one because they have abandoned the recovery disk for your model computer. We tried to recover with just a disk of Windows Vista, but when type us the product key in the box, it says something like "invalid key. But it is the right key. What can we do to recover his computer? Help, please!

  Hey

  If you don't have a recovery disk, you must have a vista recovery partition

  with an acer try to press Alt + F10 at startup to start the recovery process

  If she then asks a password the default is 5 or 6 zeros

  Walter, the time zone traveller

• My desktop computer Windows Vista opens programs in Notepad... How can I fix?

  Recently, my computer has been infected with a fake anti-virus. After that I removed the programs the user appdata folder executable .exe file will not open. He asked me what I wanted to open the program with. Stupidly, I chose Notepad and now I can't change what it opens with. My guess is that it opens with explorer.exe in the file C:\Windows\. How can I fix and that is what executable programs open to? For those of you asking that I posted this cela from my computer but I had to open cmd and start any site to Google Chrome opens successfully.

  Vista: Associate a file with a specific program Type

  To access the set Associations window, follow these steps:

  1. click on the Start button.
  2. Select Control Panel.
  3. Select programs.
  4. in the context of the default programs, select make a file type always open in a specific program.

  Associations of all window will appear. You can now change this program is associated with a file by selecting the file type, and then by clicking on the button change the program .

  If you only want to change a single file type, right-click on a file and select Properties. On the general tab, click the change button to select the program.

  or

  When you run an .exe on a Windows Vista-based or Windows 7 computer file, the file may start another program
  http://support.Microsoft.com/kb/950505

  or

  For Windows Vista file association problems
  http://www.Winhelponline.com/articles/105/1/file-association-fixes-for-Windows-Vista.html

• hot Sync Palm Centro with windows vista

  When I hot sync via USB (I have 32, 64 bit not), the connection is established and the movements done, but calendar and contacts from MS Outlook are not transferred to the Centro.  Someone at - it a fix for this problem?

  Hello BetsyJBell, welcome to the Palm support community!

  Did you say Palm Desktop to sync with Outlook?   Looking for this entry in your computer:

  Start button / all programs/Palm/PIM led Sync / syncing with Outlook.

  Select it and try another HotSync.

  WyreNut