Expansion of the macro...

Similar Questions

• Access cannot find the macro

  Hello everyone!

  I have a damaged database. I decided to try to restore. VD, I created a new database and imported all the tables, queries, forms, reports, macros of corrupted to the new database.

  However, when I try to open most of the forms, I get the error message:

  "Microsoft Office Access cannot find the macro 'TrackDBaseForms '.

  The macro (or its macro group) does not exist, or the macro is new, but has not been saved... »

  This basis has worked for a year, and I never had this problem. A Google search returns no results. However, it is obviously not in the macros page, or in any code I can find.

  I have supports this database for a year and have never encountered this missing macro. A Google search returns no results, so I guess it's something that the developers at the beginning. However, it is obviously not in the macros page, or in any code I can find.

  The corrupted database is such a State that it will not be open to all: the main form that is set to open at startup corrupts. MS Access 2007, size 500mg.

  Thank you!

  Have u tried looking for hidden objects?
  Go to Tools/Options and view the hidden objects to open the database without starting.  You can press the SHIFT key , and then open the DB. Note You may need to do this a few times.

  I hope that this recommendation will help you. In extreme cases, you can restore the data file via the repair tool of ms access as the Access Recovery Toolbox . http://www.oemailrecovery.com/access_repair.html  

• How to REMOVE the macro source code?

  Somehow, I managed to record a macro of source code, and now I can not delete it!  Worse, I've added a macro key, which I keep hitting (naturally) not by chance.

  Worse, I can't remove this macro!  The option is grayed out.  I can also delete the shortcut key assigned to it.  What I'm missing here?

  

  I myself is not entitled, concentrated it as the temporary macro. It seems as if the temporary macro cannot be removed, so that your solution to fill it with harmless instructions is the way to go.

  Given that whenever you record a temporary macro you overwrite the previous content, you can simplify the macro by recording a single statement only.

• How to capture the signals using the macro excel 2007 with lecroy activedso object

  Hello everyone...

  I hope you could help me.

  SURVEY:

  I have a macro code, but there is no output from the image displayed in the specified activedso object after successfully connected to the specified IP address.

  I think that there is a problem by specifying the activedso object.

  THE MACRO CODE:

  Private Sub CommandButton1_Click()

  Dim o As Object
  As Boolean Dim success

  Set o = CreateObject ("LeCroy.ActiveDSOCtrl.1")
  ipadd = ActiveSheet.Range ("B1"). Value ' in a specific cell ip address value

  With ActiveSheet.OLEObjects ("ActiveDSO1")
  success = o.MakeConnection ("IP:" & ipadd) ' if the true value, capture the current image of the osci waveform digital lecroy and displayed in the object activedso
  If (success = False) then
  MsgBox "not found DSO! Address can be a problem...  '& o.ErrorString '.
  GoTo 999
  End If
  Ends with

  999 set o = Nothing

  End Sub

  If there are questions or disputes my inquiry please do not hesitate to answer.

  Hello Jeff,.

  It is also a pleasure to meet you!

  There is a method "StoreHardcopyToFile", that you can use to get a picture and save it on your PC.

  Here is a picture from the help file ActiveDSO showing the method with a VBA example to use.

  

  Let me know if you have any challenges.

  Kind regards

  Leonard Brown
  Technical sales engineer
  Teledyne LeCroy
  1-800-553-2769

• Redefinition of the macro "TRIG".

  Recently, a difficult problem has been frustrating me. I created a few panels and them, then I've compiled creat some new panels, there will be some errors like "Redefinition of the"TRIG"macro."  ___TRIG is one of the panels;

  For example:

  now, I have a few panels, and the header file is:

  #define PANEL 2

  #define  RUN                                              3

  #define RUN_RUN 2 / * type of control: control, callback: (none) * /.

  #define INSTALLATION 4

  #define SETUP_SYSTEM 2 / * control type: tab, callback: (none) * /.
  #define TIMEPANEL 5

  #define TIMEPANEL_STARTTIME 2 / * control type: canvas, callback: (none) * /.
  #define  TRIG                                               6
  #define TRIG_MODEWORK 2 / * control type: binary, the callback function: (none) * /.

  When I create a new Panel "DROP":

  #define  DROP                                          2
  #define DROP_RESIDUAL 2 / * type of control: graphic, callback: (none) * /.

  #define PANEL 3

  #define  RUN                                              4

  #define RUN_RUN 2 / * type of control: control, callback: (none) * /.

  #define SETUP 5

  #define SETUP_SYSTEM 2 / * control type: tab, callback: (none) * /.
  #define TIMEPANEL 6

  #define TIMEPANEL_STARTTIME 2 / * control type: canvas, callback: (none) * /.
  #define  TRIG                                               7
  #define TRIG_MODEWORK 2 / * control type: binary, the callback function: (none) * /.

  the error is the redefinition of the macro 'TRIG' 'PANEL' "SETUP" "RUN"?

  What is the problem with them?   How to create a new Panel?  It has the same issue if I creat some new "digital"?

  Anticipating for your question.

  Each include file says :

  / * Caveat: do not add, remove or otherwise alter the content of the include file.                                         */

  You can regenerate by opening your GUI in the user interface editor, change a setting (backwards, for example a control up and down again), this will mark the user interface, such as amended so that you can save it.

• Cannot install Cosmi perfect PDF Creator get an error, the macro cannot be found or has been disabled because of your Macro security settings

  OP: I can not install Cosmi perfect PDF Creator on my Vista desktop

  How can I change my security settings on my Vista operating system? I try to use Cosmi perfect PDF Creator and I get this message: "the macro cannot be found or has been disabled because of your macro security settings.

  Hello stewart02,

  It seems to me that the Word process does not and is not able to create macros to create PDF documents with the Cosmi perfect PDF Creator. You should be able to disable macros in the tools of the program. However, I suggest that you post your question to the Support for a better Cosmi respose to your question. Here is a link you can follow to report your problem:

  https://www.Cosmi.com/support/Cosmi_Support.aspx

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Expansion of the files is at 27% and then my screen turns off? : s

  Hi all, I read the other thread on this subject on the website, but as usual the problem I have is simply a little more boring, I would like to re-Morphix vista compeltely but in order to do so I obviously need to go through this process. As the title says, when he reached 27% on the expansion of the files after the first reboot, it goes no further, then after awhile my screen turns off. IM typing this text from my laptop at the moment in the hope that all of a sudden my screen will restart and it will continue, but I doubt it very much.

  I understand more information may be needed to help me then please just ask. Thank you.

  P.s. This problem during one accurs installation from the cd rather than boot. When I try to boot from the drive and runing installing it, my screen turns off agan normally just after entering the cdkey for vista.

  I have no idea why this is happening, but if I have the sort I would be very very happy :)

  EDIT: A little later and the screen is back on, sound saying "Please wait a moment while windows prepares to start for the first time" then after that, there are a lot of points and moe points keep coming (etc.) I hope it's a good thing: S

  Hello

  1. are you able to boot to the desktop now?
  2 How much RAM you have in your computer?

  If you are unable to boot to the desktop, then unplug all external devices and try to install windows again.

  If the installation fails again, then start in the system recovery options, and run the Windows memory diagnostic tool.

  Refer to this link for help:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Kind regards
  Afzal Taher-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• The macro was interrupted because of an error, but the file remains open.

  I have a file that is opened by a macro Excel (VBA).  The macro was interrupted because of an error, but the file remains open.  I can't find any way to close.  The file is located on a server, not my hard drive.

  This is the code that opens the file/workbook

  Dim fso As Object
  Set fso = VBA. CreateObject ("Scripting.FileSystemObject")
  TT = fso. CopyFile (Sheet1.Cells (2: 17) & "List1.xlsm", Sheet1.Cells (2: 17) & "Merge1.xlsm", True)

  'bind to the data source document.
  wordDoc.MailMerge.MainDocumentType = wdFormLetters
  wordDoc.MailMerge.OpenDataSource Name: = Sheet1.Cells (2, 17) & "Merge1.xlsm", _
  SQLStatement: = "SELECT * FROM ' Sheet1$ ' WHERE sort_order IS NOT NULL" "
   
  "fill the body of the document with the fields in the data source."
   
  "first of all get the field names in the spreadsheet
  Set wkbk = Excel.Workbooks.Open (Sheet1.Cells (2: 17) & "Merge1.xlsm")
  Set headerRange = Excel.Range (wkbk. Sheets ("Sheet1"). Wkbk, Range("B1"). Sheets ("Sheet1"). Range ("IV1"). End (xlToLeft))
  headerValues = Application.Transpose (headerRange.Value)
  wkbk. Close False

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• How to disable the Macros Sidewinder X 4 (run even in safe mode and after reboot with keyboard not hung)

  Hello-

  I am now locked out of my pc because macros keyboard fill in my password.

  This happens in normal mode or without danger and without connected keyboard or pc remote access (rd or logmein and unplugged keyboard)

  Windows 7 Ultimate.

  I contacted support and they said that Windows 7 is supported legacy and would be a burden. They also mentioned that they could remote to my PC.  I would like to see that when I don't have access to give them access.

  Windows 7 end of mainstream support January 13, 2015<------This don't="" mean="" legacy="" to="">

  I have some ideas on how to fix it myself when I had the chance, I just want to see what other peoples thoughts are.

  Thank you!!

  Hi Phillips,

  Thanks for posting your question in the Microsoft Community forums.

  Let me try and help you with the problem.

  1. do you get an error message when you press ENTER after filling in the password box?

  2 did you face this problem after you assign the macro?

  3 have you tried to use a different keyboard?

  4. have you ever tried to use the on-screen keyboard?

  Check if are able to use the on screen keyboard and be able to use the remove the filled automatically password and enter the password.

  From the login screen, click on and choose the option Type without the keyboard (on-screen keyboard). Click OK.

  If this does not help, go to the Windows recovery environment and perform a system restore and check the number.

  http://Windows.Microsoft.com/en-us/Windows/what-are-system-recovery-options#what-are-system-recovery-options=Windows-7

  In addition, see the article:

  http://www.Microsoft.com/hardware/en-us/help/support/how-to/keyboard/macros

  Let us know the result. If you have any other questions, we will be happy to help you.

• New installation fails during the expansion of the files Windows 7 Pro

  Recently, I built a new computer after my old man died. I installed Windows 7 Pro, I had on the old system. Everything worked well for about a month. Then I started having various errors, some suggesting a memory error. I ran several times using the most comprehensive parameters of memtest and no problem not found. Further inspection, I discovered that a critical system update was applied just before that the problems started. I decided to roll back the change. It does not solve the problem. I tried to do a system repair. That did not work. She only had basic as IE11 and Skype applications. I had also installed the utilities for the motherboard and graphics card. So, I decided to do a clean install. Each time, it fails during the expansion of the files. The error message is, "Windows cannot install required files. The file may be corrupted or missing. Make sure all files required for installation are available, and restart the installation. "Error code: 0 x 80070570." He gets up to 30% each time. I tried to install for a V300 Kingston SSD (120GB). I also tried another SATA II HDD (750 GB) with the same problems. I downloaded a new ISO and tried to install from that. Yet once, it is not at the same point. I noticed that whenever it creates a partition system reserved 100 MB which is almost full. At one point, I got a message saying that there are about 8 000 MB of free space. (I think that was all trying to manually unzip the files by a tip I found online). I found several suggestions for similar problems, but the solutions proposed did not help. I'm sure it will be a simple solution, but I'm out of ideas. Any help would be appreciated.

  Motherboard: MSI MPower Max
  CPU: Intel i7 - 4770 K 3.5 GHz (not overclocked)
  RAM: Crucial Ballistix Sport 16G (2x8G) DDR3 - 1600 MHz
  SSD: Kingston SSDNow V300 Series 120 GB (no special driver needed)
  HARD drive: Seagate 750 G 7200 RPM SATA II
  Video: EVGA GeForce GT 2 640 GB
  Case: Corsair 400R
  Power supply: Corsair TX650M
  CPU cooler: H80i
  DVD: HP, BluRay BD R/W drive
  OS: Windows 7 Professional 64-bit upgrade (the old computer was an XP update)
  CPU Temp is around 42 C.

  If Memtest86 fails then you need to get into the BIOS and set the RAM timing.  Memtest86 + displays the calendar then use the value displayed and compare to the real specs for your memory.  Also, you may need to increase the voltage to the RAM (in BIOS) place a small amount.

  As regards the function of Intel EIST, let her enabled for now. Then enable it after installing Windows successfully.

  =============================================================

  It's the set of test utilities that I use on every new system that I'm building.

  Note: If you are OverClocking or use an automatic overclocking or BIOS power saving features, start by disabling: Intel EIST, Turbo Mode, Cool and pretty and fall back to the speed of stock as a starting point.

  Disconnect any other (additional) internal hard drives and external USB devices.
  Look for any loose hard drive power or cables SATA, graphics card or other power cables.

  First run Memtest86 +:
  It runs from a floppy disk or CD and should eliminate or confirm if one or more of your memory
  sticks are bad or the values of the SPD in the BIOS are correct.
  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), so no errors at that time then your ram is OK.
  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  Hard drive test:
  If you do not know your readers of the brand and model, try "Speccy",.
  It provides information from the computer/system in detail:
  OS, CPU, RAM, motherboard, graphics, Hard Drive, optical, Audio, peripherals, network.
  Note: Option RAM indicates number of slots, DRAM Timing.
  Works your memory speed (frequency). The nominal frequency of your memory.
  http://www.Piriform.com/Speccy

  Test your player - create a Bootable CD:
  Ranging from 5 to 25% (depending on the make and model) new hard disks are defective.
  Note: Reliability of HDD sank medium over the past 18 months.

  Test your drive with the car manufacture utility.
  If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools
  (bootable CD) and check bad sectors.
  SeaTools for information: http://www.seagate.com/support/downloads/seatools/
  SeaTools for Windows download: http://www.seagate.com/support/internal-hard-drives/enterprise-hard-drives/saturn/seatools-win-master/
  SeaTools for DOS download:
  http://www.Seagate.com/support/internal-hard-drives/consumer-electronics/LD25-series/SeaTools-DOS-master/

  For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm

  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who believe that having a brand Toshiba Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities

  Notice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/

  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  ============================ SSD Test Software =============================

  Intel® drive SSD Toolbox
  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=18455

  Life of the SSD: http://ssd-life.com/

  OCZ Toolbox: http://ocz.com/consumer/download/firmware

  SanDisk SSD Toolkit: http://kb.sandisk.com/app/answers/detail/a_id/9328/

  = Once Windows installed =.

  Device drivers: have you installed latest drivers from device of the manufacture of the motherboard?
  Check their support site for the latest drivers as the CD that came with the computer
  or motherboard may be older and less stable drivers.

  Visit the download of the manufacture of the graphics card:
  Download and install the most recent Windows 7 or 8 drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index.aspx?lang=en-us

  See also the test of 'Smoke box' Nvidia or other demos: http://www.nvidia.com/object/cool_stuff.html#/demos
  or equivalent ATI.

  Prime 95:
  http://www.Mersenne.org/freesoft/
  It's a stand alone .exe file contained in an archive .zip.
  Simply choose to run the 'stress test' option for 8 hours or more.
  If your PC can pass this test, your memory and CPU
  are very good (close the housing cover in order to maintain adequate ventilation)

  Core Temp:
  The temperature of each core of the processor.
  Note: For the overclockers using stock radiator and cooling fan Intel/AMD you can expect
  a range of 35 to 40 at idle and 60 to 65 C max temperature when running Prime95.
  http://www.alcpu.com/CoreTemp/

  CPU-ID (CPUZ): http://www.cpuid.com/cpuz.php
  Watch the clock speed of the CPU under various conditions of loading
  (when using speed step technology Intel EIST).
  #1 Note:
  CPU - ID has two tabs - tab 'Memory' that shows the actual speed of the memory
  and the "SPD" tab shows the nominal speeds for each memory location that is filled.
  #2 Note:
  COMPARE the two values, the actual speed of the memory must not exceed the rated speed of your memory.

  CPUID HWMonitor: Hardware program that reads the sensors of health main PC monitoring systems.
  voltages, temperatures, fans speed.
  http://www.CPUID.com/HWMonitor.php

  Test of Stress of FurMark GPU (graphics card):
  http://www.oZone3D.NET/benchmarks/fur/

  Pass marks burn in test: http://www.passmark.com/
  Burnin test, and their test bench at the same time give a good workout from all the major parts of Windows.

  HD Tune:
  Provides information of the car and has an option (tab scan error) to test your drive.
  http://www.hdtune.com/

  CrystalDiskInfo:
  http://CrystalMark.info/software/index-e.html
  User Manual: http://crystalmark.info/software/CrystalDiskInfo/manual-en/
  Monitoring the State of health and the temperature. Solid State Drives brackets (value of the software).

  SpeedFan:
  Monitors internal temperatures and has a function of analysis health online (SMART tab) for hard disks drive.
  It displays your drives model number and compares your drive with other discs of the same brand and model.
  Note: Unfortunately now includes a lot of bloatware, be very careful when installing remove bloatware.
  http://www.almico.com/SpeedFan.php

  GPU - Z:
  A utility light, designed for you give information about your video card and GPU.
  http://www.techpowerup.com/GPUZ/

  PC WIZARD:
  A powerful utility designed especially for detection of hardware, also analyses more.
  He is able to identify a large scale of system components and supports the latest technologies
  and standards.
  http://www.CPUID.com/pcwizard.php

  J W Stuart: http://www.pagestart.com

• When you look at the Macros in Excel, I see 'Ne01' and 'Ne02"used in conjunction with my printers. What they mean/stand for?

  When you look at the Macros in Excel, I see 'Ne01' and 'Ne02"used in conjunction with my printers.  What they mean/stand for?

  Network 01 for a network printer port.

• Message error "the macros in this project are disabled...". "creating PDF files

  The following error occurs when you create a PDF file using a document created from a MS Word 2007 templates.

  "The macros in this project are disabled...". »

  The security settings are set properly - it's not that. I've done all I can think about including ask Microsoft; they say that's not them. It may be, but I do not know how to work around. It arrived before the upgrade of my models in Office 2007 format.

  This happened to someone else? There is no coding in th etemplates regartding PDF. We use Adobe Professional X.  The error only occurs when we use Adobe Pro X.

  One thing I just noticed, our models get the following message when we go to save as PDF with Adobe:

  Acrobat PDFMAker must save the file before proceeding. Do you want PDFMaker to save the file and continue?

  You can disable macros using this registry entry:

  HKEY_CURRENT_USER\Software\Adobe\Acrobat\PDFMaker\10.0\Word\Settings\DisableMacro (value 0)

  If DisableMacro does not exist, add it as a "DWORD value".

  Note that disabling macros after a conversion of acrobat is intentional to prevent a malicious document to run a macro without your consent. Keep this in mind when this change.

  See more details here: https://helpx.adobe.com/acrobat/kb/known-issues-acrobat-x-reader.html#main_Word_PDFMaker

• expansion of the stadium.

  Hello!!

  Can someone here tell me please, how to determine the magnification of the scene without using the zoom tool, but by inserting the number as a percentage of the expansion of the stadium?

  Thanks in advance!

  Atar.

  Bulletproof is an editable comobox that displays the percentage of mag in the upper right corner of the screen.

• Expansion of the multi-page text boxes

  I have a dynamic form with the expansion of the text boxes that I designed on a single page.  As I put in the necessary elements, it was clear that she did, I would need to go to a second page to have everything you need.  When it's only the preview pdf first page works which pass the overflow to the next page.  When the second page is inserted to the finsih form areas fall more into the first page when the text in the preview before falling into the space and you can see them no longer.  I treid moving around the hierarchy and have not thought about it.  Does anyone know hoi to solve this problem?  Is it possible to have a dynamic 2-page form that develops?

  Sorry I was on vacation and in Europe for a week so I wasn't able to do this before my departure.

  The root subform (the Page level) must be set running if you want to act as you want. By doing this, you can ignore the need to add the 2nd page and let the product on the page where it is necessary to break. I modified your form so that he would do this. Note that there is no Page 2 and I added a few additional subforms to break up different parts of the form (the headers and unnamed subforms). It is advisable to appoint your subforms and if you have any code that was added may need to be adjusted to account for these additional structural changes.

  Please find attached the sample modifed.

  Paul

• automate the macro output

  Hi all
  
  I currently have two macros, buttons in the toolbar, I head out to a word generated at:
  
  Re-format to standard House (bits lost in translation of HR)
  -Remove extra spaces in the hidden text (index entries) to reduce the size of the file (13%).
  
  What I want to achieve is the macro to run as soon as the output has been generated. Can it be controlled by HR?
  
  When the project comes to an end, there will be 2 people left to preserve all documents, and I would like to make life as easy as I can for them.
  
  Thank you
  
  Brian

  I don't think that this can be achieved as a macro is started manually, as you do now, or has something to set it off. Which will normally open any folder or a specific file. You don't not clearly want the macro to run when you open any Word file so a macro must exist in the Word file containing the RH output. Clearly, which cannot exist so I don't see any way to do what you want.

  The best forum of Word I know is www.wopr.com and click on the link to the Woody show. If you explain that you want that a macro for automatic execution at the end of a document created by another application, you may find one of the gurus there is an idea. They are a very useful and very clever guy group.