Why first contact is not recognized as a mousedown?

Similar Questions

• There are six boxes to enter the serial number and the serial number on my box has 24 digits. The first six are not recognized

  I tried to enter a serial number into the regulatory policy process where we show only six boxes to enter the serial number. But the serial number on my box has 24 digits. When I walked into the top six, they were not recognized. Any suggestions on what to try next.

  Normally, you enter 4 digits in each of the 6 boxes.

  Once the 24 digit has been entered in the validation process takes place to confirm if the integer is valid.

• Why first topic is not display in merged help?

  I created a system to help merged in RH 9, suite "Merging WebHelp - RoboHelp 8 ' of Peter Grainge steps.  When I open the file by default (index) in the parent, the first theme is not displayed and I get this error under heading:

  Internet Explorer cannot display this webpage.

  I can click on just about any subject of the structure of the table of contents and it appears correctly.

  I follow step 8 (which requires to synchronize the table of contents) and made the change in the file whthost.js in the folder of output generated for the parent and the child.

  I also tried looking for this forum before asking that question, using google, according to the guidelines as the forum search is broken. But I couldn't find anything relevant.

  Thanks for your help.

  Jenny

  
  

  When this happens, it is certainly because the path to the redirect is not right. Make sure that the relative path is correct and that the target file is where it should be.

  See www.grainge.org for creating tips and RoboHelp

  @petergrainge

• Why CD - RW are not recognized on my A60 106

  I got an A60-106, had for about 6 months and still I can't recognize cd - rw which is empty media. It just does not, even if the player according to the manual says he should (uj-811 t).
  Cd - rw discs are fine as I checked in another computer. I have no problem with the cd - r or any other media.
  Can someone shed light on why this is?

  Hi Gordon,.

  Only what you can do is to test with different CD-RW´s. try again with another producer of CD. I had the same problem with a few CDs at low prices-RW´s.

  Good bye

• Why first let me not reverse a transparent video clip?

  I am creating a countdown with a timecode in a transparent video clip, then reverse the clip, but the first will not let me reverse a transparent video clip. Is there a way around this, or a better way to create a countdown?

  Nest, then reverse.

• First n - slide not recognized in CS6

  I worked PS CS6 a while now and notice a behavior coherent, different from the previous versions: it does not recognize the first click, after choosing a tool in the tools Panel.

  Try this:

  1. Select the "Marquee" tool, using the tools Panel.
  2. Move the cursor over the document and click-and - drag n. The tool does not work. We need to click it a second time to work.

  When you select the tool using the keyboard shortcut, this does not happen.

  Is this a known problem, or is it an "option" to prevent that from happening? It's pretty boring.

  This isn't a known issue. On the contrary, the first time I know someone with this issue.

  You can post your system specs?

  A feeling that I have is that it is to do with latency in the application itself. Can you select the marquee selection of the tools Panel tool, wait 1-2 seconds, then try to click on & drag on your document? You can see if that fixes the problem?

• Why is my device not recognized ipod mini?

  I'm new and do not know if my question will never be answered, but I'm going.

  I recently updated my laptop from Windows 7 to Windows 10 by accident.  However, no damage other than now when I went to plug my ipod mini to recharge, my computer doesn't recognize the device.  I just went to sign and no device is listed.  How can I add the device?  Is it still there?  I'm so confused.

  Need help

  This doesn't sound confusing, Yes. Have you checked the updates in iTunes? There may be a new update available now that you have Windows 10.

  If this does not help, I would like to try the rest of this article: If iTunes does not your iPad, iPhone or iPod - Apple Support

• Why getDBTransaction (.createPreparedStatement) is not recognized even after the import of the ApplicationModuleImpl?

  Hello world

  The following code compiles end of my ServicesAMImpl class (which extends from ApplicationModuleImpl). But if I move it to a "common" class, the code below is not even when I import the ApplicationModuleImpl class.

  protected void callStoredProcedure (string instruction,

  Object [] bindVariables) {}

  PreparedStatement a preparedStatement = null;

  try {}

  // 1. Create a JDBC PreparedStatement class.

  preparedStatement =

  getDBTransaction (). createPreparedStatement ('start' +)

  Statement +.

  "end;", 0);

  If (bindVariables! = null) {}

  // 2. Loop over the values (if any) to bind variables.

  for (int i = 0; i < bindVariables.length; i ++) {}

  // 3. The value of each variable binding in the statement.

  preparedStatement.setObject (i + 1, bindVariables [i]);

  }

  }

  // 4. Run the statement.

  preparedStatement.executeUpdate ();

  } catch (SQLException e) {}

  throw new Aexception.getLocalizedMessage (e);

  } {Finally

  If (class preparedStatement! = null) {}

  try {}

  // 5. Close the statement.

  preparedStatement.close ();

  } catch (SQLException e) {}

  System.out.println ("Exception in callStoredProcedure ("+ ")

  "String statement, +.

  ("Object [] bindVariables):" + e);

  e.printStackTrace ();

  }

  }

  }

  }

  James

  James,

  This is simple Java. The method that you have problems with, getDBTransaction, is a method that is implemented in the module application implementation class. When you move the method into a common class travel you outside the module of the application and the getDBTransaction is not accessible.

  As the only application module handles transactions, it is not supposed to move your method out of the module of the application.

  Timo

• Z10 blackBerry not recognized in text messaging contacts

  I noticed that when I receive text messages on my Z10, my saved contacts are not recognized. the sender comes in the form of number with the prefix of the country. However when I tried to save my numbers of contacts with the country code, when I recievce calls, they come there in the form of numbers and not the name of the person/people.

  I have a way around this problem.

  I just saved my 2This contact numbers. Since I was the opiton to save more than one number, I save the number with and witoout the prefix of the country. so now, I can see touch when I get SMS and calls.

  swill Thi do until the issue is reolved by blackberry. It is KB33685

• CD drive not recognized. Inefficient Windows solutions.

  My CD player suddenly decided to not read the CD more the other day.  It is not listed in Device Manager, so I not give me the ability to uninstall or reinstall the drivers.  I downloaded the latest BIOS from the manufacturer, but it has no effect.  I don't know what else to do.  Help, please.

  Hello

  This seems to be the physical hardware or the cd/dvd drive connections are damaged and that's why the drive is not recognized.

  So, I recommend you to please contact the manufacturer of the laptop for better assistance.

• Creative Suite CS5.5, not recognizing my serial number

  I have Creative Suite Design Standard CS5.5 and my Illustrator and InDesign crash on openness (error - 108). I uninstalled both programs. I did the following:

  • Installed new Creative Suite Design Standard from this link: Download CS5.5 products
    • Computer does not recognize the .dmg file (says it does not recognize disk image)
  • Installed Illustrator separately and does not recognize my serial number

  I suppose that my serial number is only for the Creative Suite Design Standard and I can't use it on individual programs, but why my computer is not recognizing the disk file? I have enough storage on my computer for it. What should I do?

  
  That was the message I had originally (before I just uninstalled).

  I even tried to download a trial version of Illustrator CS6 because I have a project due and which hangs before opening. There must be a way to get my dos programs, especially since I paid for them in the first place.

  

  I suppose that my serial number is only for the Creative Suite Design Standard and I can't use it on individual programs, but why my computer is not recognizing the disk file? I have enough storage on my computer for it. What should I do?

  fix.

  
  

  You probably have a download incomplete/corrupted.  Retry and check that the file size is correct.

  
  

  Available downloadable Setup files:

  • Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: XI, X | 9,8 | 9 standard
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
  • Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
  • Lightroom: 5.7.1. 5 | 4 | 3
  • Captivate: 8 | 7 | 6 | 5.5, 5 | 1
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2

  
  

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• iCloud contacts do not sync on all devices

  can someone help me understand why iCloud contacts are not sync on all devices?  I confirmed that keep the changes via my macbook on the iCloud touch shows almost immediately changes on some devices, but not all.

  A comment interesting, devices do not receive the change are the same Member of the family.  so I can't assume it's a matter of iCloud.  I ran a backup restore on one of the devices affected with no resolution.

  I fear I am missing something so basic, but at this point, I am really puzzled.

  Thanks for all the ideas.

  So all the machines in question are signed on the same iCloud account, and they have all Contacts enabled in settings > iCloud?

  If so, what is the level of iOS and the model of the device that is not synchronized? What is model level and iOS, other devices?

  See you soon,.

  GB

• Sansa Clip not recognized by computer - new problem

  All of a sudden my Sansa Clip is not recognized by my computer. I use MSC forced for a year and have seen the page referred by others with this problem. Nothing seems to work. Download the new firmware will it correct even if the device is not recognized? How the new firmware can be installed on the device?

  At present the Clip plays already charged music, but I can add more.

  Suggestions? Thank you.

  JEMcQ wrote:
  OK - I'm a model. I used a charging cable not provided by Sansa. This is why the computer was not recognizing the Clip. However, is there a way to NOT use forced MSC to connect? I use it since I updated the firmware to the last spring and my thumb is painful.

  Your firmware has USB mode in the settings? If so, switch to MSC there... problem solved!

• Can't burn a cd. The music is not recognized.

  I can't burn an audio cd. The Player recognizes my blank cd, and it says I have 79:57 minutes to burn. But when I add music to the burn list, I always 79:57 free minutes. The music is in the burn list, but I can't start a burn because the music is not recognized. Can someone respond to this please?

  I don't know what I did, but as soon as I played the music button "Start burn" is now available. I didn't understand why the music was not recognized in the burn list because yesterday I did the same thing and I had no problem, but knowing that everything is the same. The music was compatible and the burner has not been damaged, so I guess it was just a temporary system problem. Thanks for answer and sorry for wasting your time :)

• Bay DVD replace HARD drive not recognized by Windows

  I have a 7737 with the 256 GB SSD, but I wanted more storage internally and was not too annoyed to have DVD - so I bought a caddy and replaced the optical drive with a WD Scorpio Black 750 GB drive.

  When I went into administration - computer management - disk management tools, he acknowledged that the drive was there because he told me that he needed reprogramming - so I went ahead and let him. The disc quickly disappeared from the list, and I can't do anything that he can come back.

  I tried to refresh, rescan the drives, restart (how can I confirm the BIOS recognizes the drive correctly, as the "SATA ODD', but Windows still refuses to acknowledge that he is here.) Device Manager displays only the SSD and scanning for hardware changes have no effect.

  Maybe it's a coincidence, but now my laptop seems a touch slow, especially in the graphics... and I noticed that in the Task Manager, System interrupts now takes 10 percent of time CPU on average. I can't say that I've never noticed that before. My old Samsung laptop (which has integrated graphics rather than a dedicated card, to be honest) claims system interrupts doesn't take any time at all CPU. This seems to suggest a conflict any exist, and maybe that's why the drive is not recognized?

  Because Device Manager is not see it, I can't check for updated drivers.

  Because disk management can't see, I can't format / partition / assign a drive letter.

  The BIOS does not let me do anything with the drive, go into properties or disable / re-enable, or something like that.

  Can anyone suggest what I might have missed in the configuration, or what I can do to fix this?

  Thanks in advance.

  Unfortunately, I can't find a downloadable diagnosis for your laptop. Try Seatools. Seagate website has a download, that you can use to create a CD bootable or flash player to test hard drives.

  I just want to see if a tool outside Windows can detect the drive and all the problems.