Explorer Windows opening in 'my computer '.

Similar Questions

• Windows Explorer window opens at startup

  Whenever I have my computer running Windows 7 Home Premium 64 - bit, Windows Explorer window appears.

  This only happens after I installed my Adobe CS4 Design Premium.

  Someone here can help me with this problem?

  Hi Hazimjaafar,

  Sorry for the delay in responding.

  Your efforts to work on this issue is appreciated.

  Get multiple search engine at the same time could be a sign of infection by the virus.

  Try to analyze the computer offline using Windows defender and check if that helps.

  Search for spyware and other potentially unwanted software: http://windows.microsoft.com/en-US/windows7/Scan-for-spyware-and-other-potentially-unwanted-software

  What is Windows Defender Offline? : http://windows.microsoft.com/en-US/windows/what-is-windows-defender-offline

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Keep us in the loop to help you further.

• Explorer window - opens in itself non-stop

  I have Vista and Explorer opens the window no stop itself if I'm on the computer with the help of it or until the next day.  I'll get to the computer in the morning and find 20 to 30 sessions open.  Please help me solve this problem.

  Hi Mary 999.

  1. When did you start to question?

  2. did you of recent changes to the system?

  3. you receive messages or error codes?

  Step 1: You can check if the problem occurs in safe mode.

  Start your computer in safe mode

  Step 2:

  If you are not faced with the question in safe mode, then you can try to perform a clean boot and check.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  After you resolve the problem, see the section on boot link to how to restore your computer to a Normal startup mode.

  Step 3:

  You can read the following article and try to download the Microsoft Safety Scanner and perform a full scan on your computer.

  Microsoft safety scanner

  Note: When you perform the analysis, there are chances of losing the data that you can take a backup of important data before performing analysis.

  Check if there is information in Event Viewer which may help us to solve the problem:

  What are the information contained in the logs of the event (Event Viewer)?

  Hope this information is useful.

• File Explorer Windows open in a window separate from the App

  Want to open my computer to a particular folder location.

  Simply needs to open separately for the user to browse the files.

  How to do this?

  Thank you.

  

• File_Place_ no Explorer window opens.

  I use CS2.  When I choose file - place the gray of the screen on but no file menu pop up for me to choose the location of the file I want to place.  The box explore might be popping up off the screen?  I have checked the edges and see nothing.  I think this happened to me once in photoshop or ID and it seems that I used the arrow keys to move the box. Even reset the default workspace.

  I'm new to Illustrator, so it could be that I'm doing something completely clearly wrong, and in this case you can laugh at me as long as you tell me what it is.

  Any ideas would be appreciated.  Thank you.

  Yes, he may have moved out of the screen. See if this helps: http://forums.adobe.com/thread/482228

• Explorer Windows 7 9 my computer takes 4 minutes before WYLN rises. How to get faster.

  I can get to the desktop without any problem. I can't access anything until WYLN rises. I checked the performance with tools of diagnosis without help.

  Hi Patti,

  Thank you for the update.

  To change the settings, I recommend you contact the Internet service provider.

• Windows open randomly on my Vista computer.

  Why the new randemly windows open on my computer and how do I make sure they? Some of the windows open a site of videobasher and starts playing video on their own.

  Hello

  1. don't you make changes to the computer until the problem occurred?

  2. what web browser do you use?

  I suggest you to try the steps below and check if it helps.

  Method 1: Try to put your computer in a clean boot state, and check to see if the same problem happens.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 2: Also I recommend you to scan your hard disk from the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Method 3: Try the steps from the link below, which would allow us to delete temporary Internet files

  http://Windows.Microsoft.com/en-us/Windows-Vista/delete-temporary-Internet-files

  Hope this information is useful.

• Explore Windows crashes when multiple instance are open on the dual display

  When I have several instance of Explorer windows open on the dual display and I start copying files from one folder to another folder, Explorer plant

  Thanks, it works for me.

  I uninstalled DisplayFusion and there are no more problems with the files to be copied.

• PHANTON Drive; When I try to open the my computer Explorer window is white and I get a message that I need to format the drive F.

  Hello

  I have a laptop running Windows 7 Home Premium 64-bit.  The HARD drive is configured to have a small partition for reserved system, Partition C for the system and the Partiton E for my files.  D drive is the DVD ROM Drive.

  Very occasionally when I try to open the my computer Explorer window is white and I get a message that I need to format the drive F.  I did not have a permanent Drive F and when this happened had no other connected devices.

  Drive F is often used, as are other drive letters, by various devices from time to time, such as external hard drives, Flash, my TomTom SatNav players, camera, readers of cards etc.

  Can someone explain why this happens and if I can do something to stop what is happening in the future?

  Eric

  Some Dell computers hard drives are extremely sensitive, if your computer is DELL' consider the technical service. Because if you run recovery, you have a headache.

• When my computer is updated before stopping, my friend, turning off the laptop. Now, my laptop does not work. He said dose explore window does not. I can not open any program.

  When my computer is updated before stopping, my friend, turning off the laptop. Now, my laptop does not work. He said dose explore window does not. I can not open any program. What should I do? Please help me. Thank you

  Hi TaiNguyen95,

  ·         Have updates you installed?

  ·         What is the full error message?

  Follow the steps provided by Keith from the link.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

• Explorer Windows stopped working when opening a folder

  Hello

  I get this error "Windows Explorer has stopped working" for the past few months, every time I try to open a particular folder that contains 10-15 .avi files. This folder is located on an external hard drive and when I plugged the hard drive of a computer running XP it's the same thing. It throws this error and gives me 2 options,

  1. check online for a solution and restart the program.

  2. restart the program.

  According to the option that I chose it closes all the windows in the Solution Explorer, and nothing happens.

  I tried to copy the file from external hard disk to the local computer and the same thing happens when I try to access it. I don't think that's the problem with my computer as the same thing happens also on the XP machine.

  Please suggest what to do.

  Hello

  Please check the use of the methods in this troubleshooting and pay special attention to the latest
  the link below in BOLD.

  ----------------------------------------------------

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Explorer Windows has stopped working when I try to open a folder

  When I tried to open a file under low load it stopped working. I use windows vista. I don't have windows installation CD because it was pre installed when I bought the laptop. I downloaded windows vista service pack. but the problem still persists. Please help me with solutions

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

• Internet Explorer 11 continues to appear as an update for Windows 7 V64 and it shows as being correctly downloaded and installed when Internet Explorer is open IE 8 and not IE 11.

  Original title: Internet Explorer 11

  Internet Explorer 11 continues to appear as an update for Windows 7 V64 and it shows as being correctly downloaded and installed when Internet Explorer is open IE 8 and not IE 11.

  The IE Update downloads and installs whenever the computer is turned off, or any time an update is made.

  Download and install IE11 from here: https://www.microsoft.com/en-us/download/internet-explorer.aspx

  Check IE11 is installed, and then run Windows Update to install security IE11 patches.

  J W Stuart: http://www.pagestart.com

• Internet Explorer does not open on my computer

  Hello
  Internet Explorer will not open on my computer.
  Everything is ok with my internet service and the resolution of problems, says everything is good.
  What can I do?

  Hello

  1. what happens when you open Internet Explorer?

  2. you get any error message?

  3. were there any changes made to the computer before the show?

  If you cannot open Internet Explorer or if it opens briefly and then closes, the problem may be caused by lack of memory or corrupt or missing system files. Restart the computer to clear the memory and then open Internet Explorer.

  Please follow the steps from the link and check that it works very well.

  Tips for solving problems when Internet Explorer hangs or stops working

  http://Windows.Microsoft.com/en-in/Windows7/tips-for-solving-problems-with-Internet-Explorer

  NOTE: The Reset Internet Explorer Settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• for example to start multiple windows open in windows Explorer opens without my control panel and clicking on

  Toshiba laptop it has windows 7. Windows explore pages like control panel of the charges. How to fix this?

  Hi James,

  Thanks for posting your question in the Microsoft community

  I understand from the description of the issue, several windows open in Windows Explorer. I'll be happy to help you on this question.

  You did changes to the computer before the show?

  This problem may occur because of virus or a third-party program causing the problem.

  Method 1: I suggest you perform the clean boot and check if the problem persists.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/kb/929135

  Note: Follow How to reset the computer to start as usual after a clean boot troubleshooting article KB929135 to reset the computer in normal mode.

  Method 2: I also suggest to run virus scan online by using the Microsoft safety scanner.

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: when you perform online virus scanyou will lose some data which are affected by the virus. Microsoft is not responsible for the loss of this data.

  After trying the steps above suggested, giving us the results. If you are able to solve the problem. or know us additional troubleshooting results.