export all data (11 files pag) using the Regional service console

Similar Questions

• Cannot connect to Essbase Administration Services using the regional service console.

  Hi all!
  
  We work with the Oracle EPM 11.1.2.1 version and a few days ago our hard drive where are installed the oracle tools became full, breaking all my applications. Since then, we were not able to to connect/start of any application, including the WebLogic Server. In the oracle database, I found a papper «logic of starting web» about me They said that the security file is damaged and I followed the steps to recreate the security file (cwallet.sso) and then all the started application works well except the easconsole. When I try to connect it shows the message "failed to connect".
  
  I would like to say that until the drive became fully all my application worked well. It comes to my development environment. My EAS Server works well because I am able to connect using the easconsole of my production environment.
  
  Any idea?
  Thanks since now!
  
  Rafael Melo

  Have you tried to restart EssbaseAdminServices through the weblogic console?

• Export data to a drive that is mapped to the Regional service console server

  Hi all
  I have a question regarding the export of data from the Regional service console:

  can export us the data to the drive mapped in the Regional service console?

  Is it possible and how can it happen?

  We sent our local drives to the server and tried to export data from the console of Regional service to that mapped drive. The process has failed. Could you provide information why it go failed with the mapped drive.

  Waiting for your update.
  
  Thanks in advance

  Make sure that the user must have write access to the shared files (mapped drive)...

• Trade rules do not appear in the Regional service console

  Guru HI

  We use the Application confort Hyperion Planning 11.1.2.2.

  We have created business rules for our planning application using Calc Manager and they work very well.

  But my doubt is that calculations do appear in the essbase.

  WT could be the reason for this... Please suggest.

  Thank you.

  Hello

  The Regional service console will show you only the calculation scripts, not the rules for calculation of the Manager. This is a technical limitation.

  Prior to version 11.1.2.3, we also had business rules. These were available in the Regional service console. Then, you had a section in the view of the company next to Administration, servers Essbase called Business Rules. I usually call them Hyperion Business rules (HBR) because users easily get confused with all the scripts and rules.

  In planning, you can see the calculation scripts and rules for calculation of the Manager.

  I hope that clarifies the situation and will help you.

  Kind regards

  Philip Hulsebosch

• Cannot open/Add essbase server in the Regional service console in SSL mode

  Hello gurus,
  
  I've set up SSL in EMP which ends at the web server level, but it seems that there is a problem with the Essbase server. When I try to add essbase server in the Regional service console in a secure mode it indicates what follows in the Regional service console Message Board
  
  Error: 1040142: NZERROR: nzos_Handshake failed (29024)
  
  Records verified Essbase, but it has the same error mentioned in it. I don't know where to go from here.
  
  Any help will be appreciated. Thank you.

  I think I might have the answer, EAS will use the RTC essbase, which has its own portfolio in \EPMSystem11R1\common\EssbaseRTC-64\11.1.2.0\bin\wallet

  Now you can update the cwallet.sso in that directory or add a file essbase.cfg in \EPMSystem11R1\common\EssbaseRTC-64\11.1.2.0\bin
  wiith the location of the portfolio by using the config parameter

  WalletPath

  I also added the certificate for the cacerts in \jdk160_21\jre\lib\security file

  Restart the services and give it a go, works for me.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Unable to see my apps in the Regional service console

  Hello! :)
  
  I'm stuck with not being able to see one of my applications in the Regional service Console. I created an EPMA and a classic application and I created Essbase cubes for each of them. I have also successfully connected to my server Essbase in the Regional service Console. However when I click on the sign near the Applications node under my Essbase Server located under the node Servers Essbase in the Vision of the Regional service Console, + who + sign simply disappears and no applications appear. I would be very grateful for any advice on what is wrong in my situation! Thanks in advance!

  First connect them all with admin in EAS, then expand the essbase server, right-click security right and update the security of shared services to all users.
  Remove the essbase server in EA
  Add a new essbase server, make sure that it is checked to use external authentication and enter your account details.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Unable to connect to the administration via the regional service console server after 11.1.2.2 installation

  Hi gurus,

  I have installed and configured the services foundation, eas and essbase in windows 2003 server, afteEA r configuration I have observed that there are no tables for eas schema then I found that it was a bug and applied patch and set up again it has been successfully configured.

  When I tried to connect to the administration via the regional service console server. He States unable to connect to the administration server. everything else works.

  I see only 4 services in services.msc

  Oracle hyperion configuration manager

  EMP web server application

  opmn services

  OSH services

  all services are started with the exception of oracle hyperion configuration manager. I tried to start, but it does not start... is - this service has an impact on the administration server.

  I checked the logs, I can't find anything in easserver.log.

  any suggestions?

  Kind regards

  Kumar

  Looks like you have deployed web applications to a single managed server that is running on a port by default of 9000, then try to add the server to the Regional service as servername:9000

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Cannot find the default applications in the Regional service console

  Hi all
  
  When I opened the console of Regional service, I am unable to find the default applications in that. Kindly guide me
  
  Thanks and greetings
  Chimbu

  Hi Chimbu,

  Please check the Log-In of credentials of the user that has been created by you to connect to the Regional service Console.

  User must have administrator credentials.

  Thanks and greetings
  Saru

• Essbase Cluster node not get is expanding in the Regional service console

  Dear all,

  We use version Hyperion 11.1.2.1. I faced a new problem in Regional service console. The Essbase Cluster-1 node in the service console Regional expanding not when I tied to drilled her. For this reason, I am unable to view the applications, calculation scripts, etc. We need to run calc scripts and to add new members in the application.  Any body experienced this before? Kindly guide me to solve this problem issue.

  Thank you

  SC

  If you use the web console EAS, then make sure you are using a supported Java version, if it is supported, and then try adding the server essbase with the hostname instead of cluster.

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Need help with loading BSO cube with several data export files using the Regional service

  Hello
  
  We have BSO cubes that are huge and when I expoted data in files, it generated ABC.txt, ABC_1.txt, ABC_2.txt, like this.
  
  How to load this data in the Cube that sits on the other environments? We use Essbase 9.3.1.
  
  I can load the individual files using EAS data loading? If so, ABC_2.txt then ABC_1.txt and finally an ABC.txt would be the loading sequence back?
  
  Please suggest.

  As Essbase is written this block by block, each block will have its complete info if it is done as a single export or parallel export. You can easily prove this (and I have) If you export a database and load only files 2 or 3, it loads without error. don't forget that you load a file rules, the load fails when the first error. There is no error found, so a value of a complete block of information must be present. Also open export (large files can be opened with wordpad) and you will see a complete info for block exery

• How the packet data / * ($HOME /) files by using the bar - descriptor.xml

  Hi, using sdk native c / c ++ with playbook Simulator 1.0

  I want to distribute with my application some data files that likely should fall under the ' data /' ($HOME?)

  folder.

  (I've written / will update them sometimes, so app/native/does not appropriate I suppose.)

  in the bar - descriptor.xml, I tried adding them as an 'active '.

  who drops their bottom right in app/native / *.

  so I change the XML .bar to try to get them grounded in data.

  Here's what I found:

  by train: data/filename landed the file in app/native/data/filename

  try:... /... / Data/filename received the error

  by train: / data/filename received the error (hoping to slash leader was compared to the sandbox)

  I even on a lark tried: $HOME/filename, who literally created file app/native / $HOME!

  so he tried a ${HOME} with the curlies. I got an error saying unable to resolve the path variable.

  How can I get the data files in the folder/data ($HOME) using the .bar packaging?

  You cannot package the file into the data, you copy your files at startup, if they don't not exist your app/native/data for example

• Load SQL data using the Regional service

  Hello
  
  I've been loading data using text file, now I want to try to load from SQL server directly, but screen load data from EAS, "Data Source" is grayed, as soon as I clicked on SQL as the Data Source.
  
  What I miss here?, I configure ODBC to the server level.

  First of all, don't you configured the source SQL and ODBC in State of charge? Open the rule of the load and the "select" menu-> open SQL. Set up the sql statement in the form, then click ok/collect to test.

  Once that the rule of the load seems good, so to actually load the data, show the daa load screen as you did. Select SQL. The data source must be a Virgin because it is for the flat file. Select the rule of load (it has the SQL in it). If you look to the right of the screen, and you may need to expand to see, rather than enter the sqlID and password there. Enter those, and click ok. It should load as usual.

  If you want to leave MaxL, there is a syntax similar to tell the import statement is a sql load and give you it the id and the password

• Unable to launch the Regional service Console

  Hi all
  
  Recently, we upgraded to Hyperion EPM version 11.1.1.4 (Miantenance release) 11.1.1.3 version. When we try to open the Console to service Regional via URL, it is opening another window to download easconsole.jnlp. We have downloaded the JRE 1.5 and 1.6 also, but it still gives the same question. Pls advice
  
  Thank you
  PVR

  Well, if the problem is that I think that, when you try to open the EAS Web Console you will have just a message box asking what you want with the file open or save, and when you open the message box refreshes all simply. If that's true, save the file to, say, your desktop, go to your desktop and right-click on the file and open. It says that Windows cannot open the file etc etc. Click Select a program from a list... then place you where is your record of hava and select Javaws.exe (Java Web Start). For example, mine is here, but you may need to search:

  C:\Program Files\Java\jre6\bin\javaws.exe

  Make sure that "always use this program...". "is checked.

  When combined, restart your connection to the console and it should be ok

  Steve

• Network error when opening the Regional service console

  Hi all
  
  I've successfully installed the Hyperion. When I start the Console of Essbase Administration Services, I get the next error * "error - 1042006 - network [111]: unable to connect to [localhost:1423]." The customer has expired waiting to connect to Essbase Agent using the TCP/IP protocol. Check your network connections. Also make sure that this server and port are correct. * Please guide me to solve this problem.
  
  Thanks and greetings
  Chimbu

  Hi Chimbu,

  Follow the steps below.

  * 1. Open the Windows registry (Start--> Run--> RegEdit). *

  * 2. Go to HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\TCPIP\Parameters.*

  * 3. Add new DWORD value named "TcpTimedWaitDelay."
  -Right click and select Edit
  -Select "Décimal" radio button, type 30.

  * 4. Add new DWORD value named "MaxUserPort."
  -Right click and select Edit
  -Select "Décimal" radio button, type 65534

  * 5. A restart of the server (reboot the Hyperion related Services) is cas.*

  Thanks and greetings
  Saru

• "Missing required permissions manifest attribute in the main container" error during the launch of the Regional service console

  Hello Experts,

  I deployed Hyperion EPM 11.1.2.3 on VMware Workstation 10 with Windows Server 2008 R2 with Embedded HTTP of WebLogic Server. Deployment and configuration completed successfully.

  I have the latest Java 7 is installed.

  I can connect in the workspace, but at the launch of Regional service to http://localhost:9000/easonsole/console.htmlconsole I get the following error:

  java.lang.SecurityException: missing required permissions manifest attribute in the main container: http://localhost:9000/easconsole/eas_client.jar

  at com.sun.deploy.security.DeployManifestChecker.verifyMainJar (unknown Source)

  at com.sun.deploy.security.DeployManifestChecker.verifyMainJar (unknown Source)

  at com.sun.javaws.Launcher.doLaunchApp (unknown Source)

  at com.sun.javaws.Launcher.run (unknown Source)

  at java.lang.Thread.run (unknown Source)

  I'll very grateful for advice on how to fix this error.

  If you go to patch, then it is probably worth going to the de.500 output, otherwise you should be able to use java 1.6

  See you soon

  John

  http://John-Goodwin.blogspot.com/