Essbase Cluster node not get is expanding in the Regional service console

Similar Questions

• Trade rules do not appear in the Regional service console

  Guru HI

  We use the Application confort Hyperion Planning 11.1.2.2.

  We have created business rules for our planning application using Calc Manager and they work very well.

  But my doubt is that calculations do appear in the essbase.

  WT could be the reason for this... Please suggest.

  Thank you.

  Hello

  The Regional service console will show you only the calculation scripts, not the rules for calculation of the Manager. This is a technical limitation.

  Prior to version 11.1.2.3, we also had business rules. These were available in the Regional service console. Then, you had a section in the view of the company next to Administration, servers Essbase called Business Rules. I usually call them Hyperion Business rules (HBR) because users easily get confused with all the scripts and rules.

  In planning, you can see the calculation scripts and rules for calculation of the Manager.

  I hope that clarifies the situation and will help you.

  Kind regards

  Philip Hulsebosch

• Cannot open/Add essbase server in the Regional service console in SSL mode

  Hello gurus,
  
  I've set up SSL in EMP which ends at the web server level, but it seems that there is a problem with the Essbase server. When I try to add essbase server in the Regional service console in a secure mode it indicates what follows in the Regional service console Message Board
  
  Error: 1040142: NZERROR: nzos_Handshake failed (29024)
  
  Records verified Essbase, but it has the same error mentioned in it. I don't know where to go from here.
  
  Any help will be appreciated. Thank you.

  I think I might have the answer, EAS will use the RTC essbase, which has its own portfolio in \EPMSystem11R1\common\EssbaseRTC-64\11.1.2.0\bin\wallet

  Now you can update the cwallet.sso in that directory or add a file essbase.cfg in \EPMSystem11R1\common\EssbaseRTC-64\11.1.2.0\bin
  wiith the location of the portfolio by using the config parameter

  WalletPath

  I also added the certificate for the cacerts in \jdk160_21\jre\lib\security file

  Restart the services and give it a go, works for me.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Cannot connect to Essbase Administration Services using the regional service console.

  Hi all!
  
  We work with the Oracle EPM 11.1.2.1 version and a few days ago our hard drive where are installed the oracle tools became full, breaking all my applications. Since then, we were not able to to connect/start of any application, including the WebLogic Server. In the oracle database, I found a papper «logic of starting web» about me They said that the security file is damaged and I followed the steps to recreate the security file (cwallet.sso) and then all the started application works well except the easconsole. When I try to connect it shows the message "failed to connect".
  
  I would like to say that until the drive became fully all my application worked well. It comes to my development environment. My EAS Server works well because I am able to connect using the easconsole of my production environment.
  
  Any idea?
  Thanks since now!
  
  Rafael Melo

  Have you tried to restart EssbaseAdminServices through the weblogic console?

• Why I get to find Planning server in the Regional service console

  Hello
  
  I just finished installation system on Solaris and I have some trouble whith planning. Why I cann't find Planning in EAS server console when tyring to select the outline to my rules?
  
  
  Thank you!

  Hello

  What places do you have HBRServer.properties in? and if you have more than one which you must perform both contain the correct details in the database of the AAS.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Unable to connect to Essbase on Regional service Console server because of error 1042006

  Hello
  
  I installed the whole EPM 11.1.1.3 on Windows x 64 platform. When I try to connect the server essbase through the Regional service console, I get the following error:
  
  Essbase Server: localhost com.essbase.eas.essbase.defs.ServerCommands.Connect December 28, 2010 17:39:08 IST
  Error: 1042006: error network [10061]: unable to connect to [localhost:1423].
  The customer has expired waiting to connect to Essbase Agent using the TCP/IP protocol.
  Check your network connections.
  Also, make sure that the values for server and port are correct
  
  I checked the CFG file, which shows the correct port as well. I can connect to the Administration of Essbase server located on the same machine, but do not know why I get this error message. Below I have pasted the contents of the CFG file, in case where someone wants to cross check it out.
  
  
  CFG File indicates the following:
  
  ; The following entry specifies the full path to the JVM. DLL
  ; JvmModuleLocation D:\Hyperion\common\JRE\Sun\1.5.0\bin\client\jvm.dll
  BPM_Oracle_DriverDescriptor "MERANT 5.2 OEM 32-BIT Oracle Wire Protocol.
  BPM_DB2_DriverDescriptor "MERANT DB2 Wire Protocol BITS 32 5.2 OEM"
  BPM_SQLServer_DriverDescriptor "MERANT 5.2 OEM 32-BIT SQL Server Wire Protocol.
  BPM_SQLServer_DriverDescriptor "SQL Server."
  ; BPM_Netezza_DriverDescriptor "NetezzaSQL".
  BPM_Teradata_DriverDescriptor "Teradata.
  BPM_ORACLEBI_DriverDescriptor 'Oracle BI Server'
  ; AuthenticationModule CSS
  ; AGENTPORT 1423
  ; SERVERPORTBEGIN 32768
  ; SERVERPORTEND 33768
  ; AGENTDESC hypservice_1
  AGENTPORT 1424
  SERVERPORTBEGIN 32768
  SERVERPORTEND 33768
  AGENTDESC hypservice_1
  
  
  Ideas that would be really useful.
  
  Thank you
  AJ

  There is a clue in the error message and the CFG file you posted.

  The error message:
  ...
  Unable to connect to [localhost:1423].
  ...

  CFG file indicates:

  ...
  ; AGENTPORT 1423
  ...
  AGENTPORT 1424
  ...

  The port default (1423) is commented out and changed in 1424. Your EAS connection must use port 1424 and not default to 1423.

  Try to use "localhost:1424" (without the quotes) in the Essbase server field when you add the Essbase server to EAS.

  Published by: Robert Armstrong on December 29, 2010 13:25 - typo

• I can not get a preview of the photos more in Explorer. I have a HP Pavilion dv7 Notebook PC

  I can not get a preview of the photos more in Explorer. All I see now is the default icon and not the tile. I have Windows 7 Home Premiun SP1. I have install all recommended windows updates.

  Thanks Banhien,

  I thought about it. Somewhere along the line, one of my folder options (always show icons, never thumbnails) changed and I didn't just it.

  See you soon

  Colleen

• During upgrade Adobe Creative Suite CS4 ME in Adobe Creative Suite CS5.5 Design Premium, I get an error saying that the serial number is not an eligible product, please try another. I used to be able to get a code for the customer service, but I can't

  During upgrade Adobe Creative Suite CS4 ME in Adobe Creative Suite CS5.5 Design Premium, I get an error saying that the serial number is not an eligible product, please try another. I used to be able to get a code for the customer service, but I can't chat. Please advise!

  MoeGhazal I have reviewed your account and it seems that you have upgraded to a volume license CS4 Design Premium for an upgrade of retail Design Premium 5.5.

  I also shows that you have made two purchases of CS5.5 Design Premium, but the second purchase was cancelled.  Make sure that you use the serial number that ends in 7886.

  If you are using the correct serial number, then it is likely, that the installer won't recognize your serial number of volume license CS4 as being valid for upgrade.  If you can contact our support team you can be traversed through an unlocking procedure to allow you to proceed with the installation.  You can contact our team of support directly in Contact with the customer.  You can try to install a web browser, you have not previously used.  It of probably a toolbar or other software applications affect your ability to access the media cat successfully.

  If you are unable to reach our support team, then please check your account information is accurate.  If you can please then update this discussion after the confirmation of this so I can ask a member of our support team contact you directly.

  I would recommend again reaching out directly if possible it will be the most effective method to resolve your current error.

• Printer installation tries to install e-printer on a netbook... don't get a message on the spooler service. What is the spooler service?

  Try to install e-printer on a netbook... don't get a message on the spooler service.  What is the spooler service?

  Hi Pat,

  Spooler service manages print jobs by saving in a queue and submit them to the printer in order specified instead of sending them directly (which can cause the printer back up if too is sent at a time depending on how printing is setup and the printer works).

  Try the simple fix to see if it works.  Go to start / Control Panel / Administrative Tools / Services and place you on print spooler and double-click it.  Click the Dependencies tab, go to all the services listed there and confirm that they are automatic and started.  If this is not the case, change it to automatic, and then restart them.  Once finished, return to the print spooler and set it to automatic and start it.  Click OK and close out Services and control panel and restart.  When you come back, come back to Services and check that the print spooler again told automatic and started.  If this isn't the case, after back and let's check other things.  If so, proceed to the installation of the printer, and this particular problem should no longer be a problem.

  I hope this helps.

  Good luck!

• I've tried everything recommended to remove the Client Services for NetWare and still not get quick change of the user's screen. Becomes very angry. Rob

  Still not get quick change or log in screen which has all of the names to open a session

  Hello

  So in this case I recommend you to uninstall the complete NetWare using a 3rd party UN-install commercially available

  For example http://www.revouninstaller.com/index.html

  There are also many other software that I don't remember not and are available free on the internet for UN-install/remove left on entries of an application.

  Saurabh yapi | E-mail address is removed from the privacy *.

• I get a message saying "the specified service does not exist as an installed service."

  Hi, im having problems with windows vista where whenever I try to update my system (security, java, adobe) or I right click on the sound icon in the toolbar of my screen (and open) section, I get the message saying that the specified service does not exist as an installed service. SO, I searched online and which did not help. Oh and by the way, when I get the options after I have right click on the sound icon, I can't click on the mixer. IM using a dell inspiron 531 and it works on windows vista and is very slow, almost never answers (only restores the games that I have on it) and has an athlon processor. What should I do? Thank you, Shawn White. P.S. that's in the good topic?

  Hello

  1. you remember to make changes to the computer before this problem?

  2. what anti-virus is installed on the computer?

  Follow these methods

  Method 1: A Microsoft Safety scanner to make sure that the computer is free from virus infection:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 2:   Run the fixit in the following Microsoft article and check if it works.

  Solve problems with programs that cannot be installed or uninstalled:

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/

  Method 3: Run a file system check Scan (scan SFC)

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  a. open an elevated command prompt. To do this, click Start, click principally madeprograms, Accessories, right-click guest, and then click run as administrator.

  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  b. type the following command and press ENTER:
  sfc/scannow

  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  Merthod 4: Check services.

  Check if a service is stopped or disabled. You will need to check each service one by one. If you find any service is stopped or disabled, you must start or enable and check if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows-Vista/manage-services-in-Windows-Vista-from-Windows-Vista-inside-out

• Windows cannot add printer print spooler service is not running. Even after the spooler service is started I get code error 0x000006be

  I have XPS from Dell with Windows Vista Home premium 32-bit. I'm trying to connect the office jet J4680 HP wireless printer. The printer was working with this PC, but for the last 2 weeks, something has changed and I can't reconnect to the printer. I get the error Printer Spooler service is not running. After I have start the spooler service and try to add a printer, I get an error 0x000006be code

  Hello

  The main problem is caused by corrupted printer drivers, you will need to check with your printer manufacturer for
  Download the latest drivers (just re - install the old ones will probably lead to this error). Make sure that you
  Download for your version of Windows and 32 bit or 65.

  Error message when you try to connect to a print queue in Windows Vista or in Windows Server 2008: "Windows cannot connect to the printer. Impossible operation completed (error 0x000006be)»
  http://support.Microsoft.com/kb/946394

  ==========================================

  Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
  the latest version of the driver).

  Problems of print and error - a Mr Fixit of printing
  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx
  ------------------------------------------------------

  Logon as administrator

  Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - Classic - printers

  Try after unplugging your printer if necessary.
  ------------------------------------------------------------

  Check this thread - stop and disable the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  and here
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

  ------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Try to run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  If no joy:

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Try runnng Chkdsk of Recovery Options
  (it of a more efficient way to manage to restart the computer and might work)

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• U2414H DisplayPort 1.2 STD Set Up - monitors will not get video Signal from the graphics card during start or restart

  * What specific Dell monitor? 2 two U2414h monitors with MD214 - package of multi-monitor support
  * What specific model of computer, desktop/laptop? Workstation HP xw8400, Intel Quad Core Xeon CPU E 5335 @ 2.00 GHz, 4.00 GB of memory
  * What operating system? Windows 7 Professional 32-bit
  * Which video card? AMD over-pants V3900
  * Which ports are available for the video card? DisplayPort 1.2 STD, Dual-link DVI
  * Which video output from the video card port video on the port monitor do you use? Output Mini DisplayPort Display port in
  * What cable are you using to set the video card to the monitor? Adapter DisplayPort to MiniDispayPort - we came with every Dell monitor
  * You use the Dell supplied cable? Yes - two monitors

  * Press the Menu button of the monitor to open the OSD (On Screen Display). The bottom of the screen should display a resolution. This resolution should match the resolution of the default monitor. The two monitors: 1920 x 1080, 60 Hz

  * Brief description of the problem monitor? Monitors have been implemented following the instructions on page 25 of the Dell online manual to connect the monitor to function DP multi-flow (MST). DisplayPort cable is connected to V3900 output MiniDisplay port DisplayPort graphics card in the 1st U2414H; second DisplayPort cable is connected to the DisplayPort on 1 U2414H monitor output and MiniDisplayPort in the 2nd monitor U2414H. Dell U2414H drivers have been installed from the CD provided and both recognized by Windows. V3900 graphics card Driver is up to date with the EyeInfinity software. Source of input on both monitors the Mini Display Port value. Display settings on both monitors Display Port 1.2 value activate. Resolution of the screen on Windows 7 shows: (a) two separate Dell U2414H (mini Display Port) screens, with each resolution 1920 x 1080, multi (b) displays the value "to extend these displays. The two views work with Setup leading up to and acknowledged by the graphics card.

  Problem 1 - all the time - monitor power buttons are lit, the computer is turned on, then monitors lights don't - they show 'Power save mode' and then turns off. To hit the power button on the computer to shut down Windows. Only way to get these on monitors is unplug cords from the back of each monitor, wait a few minutes, plug in the power cord, start computer and then both monitors will start up and sign of windows to the screen will appear and monitors will work. Normal operations for a full day of work if you do not restart. If you need to restart during the day (like when you get a software update), the same thing happens. Start the computer to restart, but the monitors come back on not and remain dark. There is nothing wrong with the graphics card V3900. He is certified by AMD and DisplayPort.org to work in an environment of STD DisplayPort 1.2. I had previously two 215tws Samsung SyncMasters connected to each output V3900 Grahics card and they work very well in extended mode for years until a SyncMaster 215tw started shaking like crazy. A SyncMaster has been connected to the out display with a dongle and a DVI cable Port. The other SyncMaster was connected to the DVI output on the graphics card. So I decided to buy these two U2414Hs. Technical support Dell after many phone calls and e-mails finally advised me that there is a problem of "compatibility" between my computer and the U2414Hs and recommended that I return the monitors. On the web site of the U2414H AMD has not been certified by AMD to work in a DisplayPort 1.2 STD Set Up. Other former Dell monitors are certified by AMD to work in the Display Port 1.2 Setup. DisplayPort.org lists the U2414H to work with Display Port (it does not say that it will work in a DisplayPort 1.2 Set Up).

  Problem 2 - shift perceptible in the entrance of Microsoft Blue Tooth keyboard and mouse and PS2 Keyboard and mouse. All the drivers are up to date. When you type a phrase, it takes a few moments for the text displayed on the screen using a keyboard. Both the mouse connected and the Bluetooth mouse are unresponsive sporadically for a few moments until they finally react. It happens regularly during the day. The monitors provide excellent clarity when you work. The stand is ideal for office property. Before these monitors are returned if no one knows what causes these two problems and does anyone have a solution? Should I stop using the Display Port 1.2 and hang them using HDMI with active dongles? If I have to return these two U2414Hs, I considered the 2 two U2413s. Someone at - it all opinions on the last U2413s from Dell? I have read some real problems with ghosting that I just haven't the time for more. The remanence correction in the models of U2413 sold in 2014? There are very few monitors on the market with Display Port in and out to the back to support DisplayPort 1.2 STD Transport.

  Thanks for any input.

  I had to remove my VGA HDMI DV card and now the DP (display port) works very well. Don't need to use a HDMI cable. Display Port 1.1 is reported as the problem in order to remove the card solves this problem.

• SA520W does not get an IP on the WAN option

  We use a SA520W as our main router and have a fiber attached to the interface default WAN connection. We would like to improve our availability using a secondary internet connection on the WAN interface option.

  We bought a router dovado tiny 4g for this another connection. It acts as a dhcp server, but the Cisco router does not get an IP address from the dovado router. The router works as expected when it is connected to a normal computer. But somehow the cisco router does not get an IP address.

  I also tried to put a static IP address for the Cisco router, but that did not help either. The dovado router is setup deliver ip in the range of 192.168.0.2 - 254

  Link is established, but State wide AREA network is down. Any ideas?

  

  Christian,

  Make sure that the port option is set to WAN and WAN mode = MODE of LOAD BALANCE. If not pull an ip address or to negotiate a connection.

  Jasbryan

• BlackBerry smartphones can not get BBM working or the Facebook app

  A few months from my blackberry but I still can't work of BBM, I have a contract with 250 MB internet and I can use the normal when browser im out and about. I cannot use the Facebook app when I am connected to WiFi. My BBM says (waiting) when I add a person, and it does not show that I added them on their phone. I'm on Vodafone,

  Thank you

  so here is the question... you do not get a password business unless you are on a BES plan, it is for professional use... for personal use, you would use BIS (blackberry internet service)... to do this, you need a data plan activated BIS, chances are, your data plan is not for Blackberry use...
  I would give Vodafone a call and check your tariff plan.
  Once you have a plan active BIS, will allow you to have another option other than of the company e-mail configuration.