Export of decision-making to different mount point.

Similar Questions

• How to restore the different mount point rman backup

  Hi all
  I have my RMAN bkp on my production under mount point/d01/rmanbkp server. I need to restore rman on TEST server. I don't have /d01 of mount point on my test server, so I need to restore to the point of different Assembly called /oraapps. I finished copying all my backup RMAN on TEST server, but when I try to restore it. He seeks his path of moose that is/d01/rmanbkp. Suggestions, how can I do.
  
  Concerning
  Musaddaq

  Hi Musaddaq,
  When you perform a restore on the test server after having mounted the controlfile enables control of catalog catalog of the backup pieces in the new directory structure.

  CATALOGUE START WITH ' / oraapps';

  Kind regards
  Tycho

• Instance of A database clone on a different mount point.

  Hello Gurs,
  
  I need your help I need to clone a 11.1.0.7 instance of database on a NEW mounting point on the same host. The host is a HP - UX box and my question is that I need to install the oracle database software in the new mount point and then clone? or cloning until this NEW MOUNT itself will create all the necessary software? Of Please provide me with all the documents that will be useful for the process.
  
  Thanks in advance.

  RMAN would connect to the database if you specify the sys user specifying the user name.
  In the command that you used

  "" RMAN > target PRODY auxiliary / ".

  Default RMAN connects to the PRODY database with the sys user.

  As said earilier, to resolve the problem you are experiencing, use the connection strings when connecting your databases if there is more than one instance running on the same computer.

  882065 wrote:
  I have a small question here-->

  What is the difference between:
  $rman auxiliary sys/***@prody target.
  AND
  $rman target auxiliary prody.

  $rman auxiliary sys/***@prody target.
  In the command above rman attempts to connect the target database with the sys user name and the password for the sys. Also you try to connect to the database using the connection string 'prody"that is mentioned in the tnsnames.ora file. For the above command works, you should set the ORACLE_SID to auxiliary database and use it later.

  $rman target auxiliary prody.
  In the above command, rman connects to the target "prody" with the sys user database and later ask the password for the sys user. When connecting to the "auxiliary / ', it assumes you are trying to connect to the same database (prody) and therefore again connects to the prody database."

• Move the data to different mount point file...? 10g R2

  I have data like the following files...
  
  /U02/MY_TEST_DATA/data01.dbf
  /U02/MY_TEST_DATA/data02.dbf
  
  I'm running out of disk space available in u02.
  
  How to move these two files to u03? I have a lot of space in u03.
  HP Unix, Oracle 10g R2.
  
  What I need to change other settings when I move the location of the file? for example, backup, archieve etc...
  
  Please advice.
  
  Thank you
  GISH

  Your control file will be updated with the new location of the data file and you'll be all set.

• vCenter for protection SQL Server Heartbeat mount points

  Asking if anyone out there knows if vCenter Heartbeat (6.6) supports SQL Server installed on the mounting Points, this installation of HB is to protect the DB SQL vCenter.

  The file system has a provision when the directory of newspapers and directory bin ect are each on a mount point in the same volume of index (g) (for example diskpart: ASSIGN MOUNT G:\SQL55_BIN)

  I get this error when you start replication, and replication does not start.

  Automated Replication Stop Applied : Use of Invalid Reparse Point / Microsoft Mount Point has been detected for the file / directory : G:\SQL55_BIN
  As a result of this, VMware vCenter Server Heartbeat has been stopped with the protected applications left running.
  

  Have not been able to find this error on the googleplex and no reference to the doco on the mount points...

  I know that the end of his LIFE, but I'm not the decision maker and happy not to do.

  Clues?

  FYI,.

  mount points is not supported

• Questions of NFS mount points

  I have two questions about how the NFS mount points is in fact from the point of view NFS servers.

  If the mount point of the 'outside' is considered as for example / ISO, would this mean

  1. that the directory is named "iso" or could it be a real name on the local file system on the NAS Server? (As in the names of SMB share, could be different from the name of folder.)

  2. that the folder is actually located directly on the root of the local file system, which is/ISO on the server, or would it be for example/dir1/dir2/iso and always to the outside as appearance / ISO? (As in the SMB, where 'share' creates a new root somewhere on the filesystem that is exposed to the outside.)

  ricnob wrote:

  Thank you! It would be a typical NFS-Unix/Linux server?

  Yes.

  So perhaps it is not defined in the standard how this should be done, but can vary between implementations? (* nix of course most common.)

  Possible, but does MS ever meet standards? Even their own?

  RFC1094/NFS:

  "Different operating systems may have restrictions on the depth of the tree or used names, but also using a syntax different tor represent the"path", which is the concatenation of all the"components"(file and directory names) in the name...". Some operating systems provide a 'mount' operation to make all file systems appear as a single tree, while others maintain a 'forest' of file systems... NFS looking for a component of a path at the same time.  It may not be obvious why he did not only take the name of way together, stroll in the directories and return a file handle when it is carried out.  There are many good reasons not to do so.  First, paths need separators between items in the directory, and different operating systems use different separators.  We could define a representation of network Standard access path, but then each path must be analyzed and converted at each end. "

  AWo

  VCP 3 & 4

  \[:o]===\[o:]

  = You want to have this ad as a ringtone on your mobile phone? =

  = Send 'Assignment' to 911 for only $999999,99! =

• How to create a mount point on the esx host?

  When I try to add a DTX200 with option NFS, invited to say "a mount point must be created on the host computer before being added as a data store.

  2 questions:

  (1) how to create a mount point?

  (2) how do I know the NFS Server works well and can be mounted by the host?

  Thanks in advance.

  Export of the sample:

  / flight/vol6/nfs_006 - sec = sys, rw = esx001:esx002 root = esx001:esx002, nosuid

  Host names must resolve to the VMKernel interfaces that you use for storage (DNS - otherwise specify IPs above)

• Installer ask mount point?

  I try to install on a MacBook Pro 13 "Yosemite, but it asks for: "a disk with a mount point is needed"

  Can someone tell me what it is? I formatted the HDD MBP and have an external drive with Yosemite and a Flash DRIVE with the software to install.

  Help, please.

  Logan_VII wrote:

  I formatted the HDD MBP and have an external drive with Yosemite and a Flash DRIVE with the software to install.

  It is unclear where you try to install Yosemite.

  Open the DiskUtility to see if your external hard drive is recognized, you can force mount the drive in the menu drop-down

  DiskUtility > file > install

• I have an error: a drive with a mount point is required - what it means?

  I have an error: a drive with a mount point is required - what it means?

  Please explain EXACTLY what you were doing before this message appears.

• Microphone on HP Jet 7 decision-making

  What the Jack for a microphone in the stream Hp 7?

  I'm trying to use a cast IRig mic which has a 3.5 for the audio output and microphone jack to and does not work, so what type of decision-making should the microphone works fine on the 7 flow?

  Hi, thanks for your quick response.

  The external microphone is working correctly when it is connected to the Jack, but Windows does not detect as a new device. Casting TheiRig mic works fine, but with a very low volume.

  Thanks again. solved it for me.

  Tololino

• tables that the decision-making process

  Hello

  I have a list of tables that must be used as input for decision making. attached are the VI and the input file. What is the high_data > 10, it must perform the square root which is under the real condition. When the high_data is less than 10, it should return zero which is false conditional. I tried to use the Chooser of the case, but it seems table cannot be used for the selection of cases. Can someone help me with this. Thank you

  First of all, you have the race condition because of the flagrant overuse of a local variable. Most likely, the local variable is read before the terminal of the table gets valid data. Remove the local variable, and use a wire directly. Do not forget, LabVIEW not Executive up and down or left to right. The order of execution is entirely determined by single dataflow. If you have multiple processor cores (and you probably have), things can even Executive in parallel.

  Second, have you tried simply to encapsulate an autoindexing FOR lop around the structure of matter? Then clean the proof of the scythe, which needs a scalar instead of an array, etc... There are also solutions without loop, but let us in to the essential.

• System Restore will not work, said that there is an error and try a different restore point

  When I try to use the system restore it always fails, it says there is an error and try a different restore point, I did several times and it still does not work, can you help me. Thank you

  Hello

  This can help you:

  1. If you are using Norton, you should disable Norton inviolable Protection before using the system restore.

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  2. try to use Safe Mode system restore.

  http://bertk.MVPs.org/html/restoresysv.html

  3 Malware will stop at the system restore.

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware, if necessary in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And here's how to go in Safe Mode options; Select safe mode with networking from the list of options:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  See you soon.

• Trying to system restore but impossible - error: no changes have been made to choose a different restore point and try again

  Windows vista system restore error: no changes have been made to choose a different restore point and try again. I did and got the same answer. dirtied with services before that, so why I did a restore. go to services and everything works again no luck.

  Hello

  1 Norton will interfere with system restore

  If using Norton, disable Norton Protection inviolable, use SR.

  2. try Safe Mode system restore:

  And here's how to go in Safe Mode options; select Safe Mode from the list of options:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  3 malicious software stops the restoration of the work system to protect themselves from coming off.

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware, if necessary in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  See you soon.

• Mount point of the external SD card

  The SD card works obviously, since I updated to 4.1

  I can't find the volume with Windows Explorer ARE. What is the path to the external sd card?

  Link to image

  Moderator comment: images > 50 KB converted for programming. Community rules.

  This clarifies the paths:

  The mount points are:

  / Import/Storage/sdcard0 /.

  / Import/Storage/sdcard1 /.

  /SDCard and /sdcard2 are aliases.

  Link to image

  To mount all readers with davdrive, just change the path in /sdcard davdrive to.

  Moderator comment: images > 50 KB converted for programming. Community rules.

• Disk monitor mount points

  Is there a way to monitor the disk mount points in Big Brother (Windows Server). Do we need an external script?

  Should be an external script, a drive letter may be assigned to this mount point, but it defeats the purpose of using start with a mount point