Similar Questions

• Media Player... Whenever I try to play a video, I get only audio but no video

  Whenever I try to play a video, I get only audio but no video

  Can someone help me

  Hi Pedro Gonzalez h,.

  Thank you for writing to Microsoft Communities.

  I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.

  Until we start troubleshooting on this issue please provides us with additional information by answering a few questions below, this will help us better solutions to the problems.

  1. What is the accurate and complete error message you get when you try to run?
  2 did you do any change to the computer before the show?

  Method 1
  I suggest you to run the fixit from the following link:

  Solve the problems of Windows Media Player video and other media or library
  http://support.Microsoft.com/mats/windows_media_player_diagnostic/

  Method 2
  I suggest you try the steps from the following link:

  You receive a codec error message or play audio but video does not play when you play media files in Windows Media Player 11
  http://support.Microsoft.com/kb/926373

  Hope the helps of information. If you need help, please reply. We will be happy to help you.

• film director publication for computer problems / sound but no video

  I can do and get a glimpse of a sd video in movie maker, but when I publish it, some of the clips have audio but not video. I also tried the publication of a dvd and the same result. Sometimes I can watch the clips in media player until I send them to movie maker and sometimes I can't. It also appears if I try to take the file from my documents before publication and reformat, isn't there? I had this problem throughout, I thought that I understood when I used some formats, but it doesn't seem to be the case. What can we do? I have several formats of videos on my computer

  I can do and get a glimpse of a sd video in movie maker, but when I publish it, some of the clips have audio but not video. I also tried the publication of a dvd and the same result. Sometimes I can watch the clips in media player until I send them to movie maker and sometimes I can't. It also appears if I try to take the file from my documents before publication and reformat, isn't there? I had this problem throughout, I thought that I understood when I used some formats, but it doesn't seem to be the case. What can we do? I have several formats of videos on my computer

  ==============================================
  Brief paragraph... many questions... I'll try to come up with a few ideas...

  The free VLC Media Player can play any video...

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player
  http://www.videolan.org/

  The file you are trying to convert may be a project .mswmm file
  It is only compatible with Movie Maker... they cannot be converted.

  When you try to access a video clip that you "know" is sometimes in a
  file, but you can not see... is it because that the format of in that the video is
  not compatibile with the software you are trying to access.

  The following freeware is a useful tool to convert a lot of different
  Movie Maker formats...... use the conversion to WMV format would be
  a good choice.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.pcfreetime.com/
  (the file you want to download is: > FFSetup260.zip
  (FWIW... installation..., you might want to
  Uncheck the box 'all' boxes on the last screen)

  First, you will need to decompress the file or just open the
  Drag FFSetup260.exe out of the folder
  and drop it on your desktop. To install left click.

  First... after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your video clips on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Audio but no video using airplay

  Both my Apple TV do not allow any airplay broadcast correctly. I get audio but no video. I reset the units that I restored the TVs I have change the HDMI cords and I reset the modem and the router.  It gets really frustrating

  Web sites and third-party applications must allow before they will allow content base video AirPlay. Some site Web/App developers have failed their products, some have just had him yet, others have stated that they are enabling AirPlay (probably due to licensing issues).

  Mirroring does not need activation and will work by default, however, some developers have chosen to block AirPlay mirroring working with their applications.

• Flash Player plays audio but no video

  The Flash player on my computer plays audio but no video.  The screen is blank.  If I move my mouse over the screen, sometimes, the video will be momentarily but then disappear.  This happened for months

  I tried uninstalling and reinstalling several times.  I've disabled ActiveX filtering and enabled the Flash module.

  When I go to Test Flash Site, I can see the animation of the ball moving across the screen.   And he tells me that the program is installed successfully.

  When I search the Flash program on my computer I can't find it.  Also, I can't find the AppData folder.

  I have the version 11.1.102.55

  Windows 7 / 64-bit

  THAT IS TO SAY 9

  Windows: How do I update the device driver for my graphics/video card?

  Or

  How to disable or enable hardware acceleration?

  But don't go to page find Flash Player Version but instead go to: http://www.adobe.com/software/flash/about/

  And right-click the area under Adobe Flash Player.

• I still have the problem to start appeal video Messenger with window 8... ? do you have an answer for me?

  Separated from this thread.

  I still have the problem to start appeal video Messenger with window 8... ? do you have an answer for me?

  Hello

  Thanks for posting your query on the same issue. I will certainly help you in this matter.

  However, I would like to know;

  1. What is the brand and model of your computer?
  2. As you mention "you still have the problem" can I know when this problem occurred in the first place?
  3. Which messenger you are talking about?
  4. What happens when you try so that video calling?

  If you re referring Skype Messenger, please follow the steps.

  Check the permission, follow the steps:

  1. Press Windows + C on the keyboard.
  2. Click settings.
  3. Go to permissions.
  4. Webcam and microphone and turn it on.

  

  See also:

  Chat, call and video call with Skype

  Let us know if you need more assistance. We will be happy to help you.

  ____________________

  Thank you best regards &,.

  Isha Soni

• I tried to fix the problem yourself, but I can not

  I tried to fix the problem yourself, but I can't make it work...

  Well, I want to download an application or update my programs, so write "error".

  When I click on help, then I'll just in the page start or something...

  Maybe I missed something, but at least I need help

  Hi Isabelle,.

  Please try:

  1 try to clear the temporary files folder.

  2. restart your machine.

  In case you are still facing problems, click on learn about the error and to share with us the exact error or you can contact support for assistance: contact customer service

  Kind regards

  Akshay

• With media player, I get audio but no video. What is the problem?

  Whether it's a wvm file or not, I get a black screen with audio only.

  Hi newbewon1

  1. you try to play a WMV file?
  2. what operating system is installed on the computer?

  I suggest you to check and to provide us with the information about the installed operating system.

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  For resolution, please refer to the procedure below and identify what codec was used to compress the file. You must install the codec even on the computer to read the file. There is no absolute way to do that, but here are your best options:

  ·          To determine what codec was used with a specific file, play the file in the player, if possible. When the file is playing, right-click the file in the library, and then click Properties. On the file tab, look at the Audio codec and Video codec sections.

  ·          Use a non-Microsoft codec identification tool. Many are available on the Internet.

  So you can check if the installation using the correct codec solve you the problem. You can use your favorite search engine to download and install the codec. Refer to the below help links -.

  http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions

  http://www.Microsoft.com/downloads/en/default.aspx

  http://support.Microsoft.com/kb/316992

  NOTE- Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  I hope this helps.

• Beginner problem - monitor Source plays audio but no video

  Hope someone can help me with this. I use CS4 for a little over a year with few problems.  The last time that I used something messed up because now any video can I import into body, when I play the video in audio playback Souurce monitor but the screen stays black and when I play the video in the monitor of the program, it's like looking through a colorful film.  I have another computer next to me with the agency that plays the same files very well.  I checked all the settings I can think to pair with the functional computer and can not see any differences.

  Any suggestion would be appreciated.

  Here is the problem machine.

  

  This is what looks like the right machine - then there is nothing wrong with the video file:

  

  Welcome to the forum.

  That-screenshots looks like a video driver issue. It probably wasn't something you did, at least not directly. A lot of things that can make an outdated video driver are in the background, like a simple OS, or hot - fix update. It allows to these, and usually good as they should. However, PrPro if interface with the video driver, more than most of the programs, and if everything is not 100%, problems can occur. Other programs do not have this close an interface and never have any problems or complain.

  Take a look at this THREAD, because there are a lot of similar questions in the different links.

  I would go first to the mfgr of the video card. Web site and download and install the latest driver. Be sure to read the installation instructions, such as those that can change from pilot to pilot. Usually, it is just a simple executable file, but in some cases, the user must do some things first - just check this version.

  Good luck

  Hunt

• Build ok but then export the problem. systemCmdWaitTime has no effect...

  Hello together,

  When I build a virtual machine sometimes (and now very often) a version works well on the supply system but of cannot be exported from the system of supply to the Studio...

  Studio: v2.1

  Transfer system: ESXi 4.0

  Model: generation based on "/ opt/vmware/etc/build/templates/ubuntu/08/044/build_profile.xml".

  Debug.log error:

  0/08/2010 16:18:40 [info] Installation finished.
  10/08/2010 16:18:40 [info] Checking for post-OS installation error ...
  10/08/2010 16:19:16 [info] Transporting VM from provisioning host to Studio; this may take a few minutes...
  10/08/2010 16:20:14 [warn] Failed to see password prompt for: </opt/vmware/share/ovftool/ovftool '--name=1.1.1.1_myVM-v2_.79' '--targetType=vmx' '--diskMode=twoGbMaxExtentSparse' 'vi://usernam@ESX-hostname:443/1.1.1.1_myVM-v2_.79/' '/opt/vmware/www/build/myVM-v2_.79/va'>.
  10/08/2010 16:20:14 [info] Try increasing vadk:systemCmdWaitTime (currently set to <30> secs) in the profile.
  10/08/2010 16:20:32 [warn] VM transporting failed! Error:
  10/08/2010 16:20:32 [warn] 
  10/08/2010 16:20:32 [error] Encountered a fatal build error!
  

  The problem is that I have increased the vadk:systemCmdWaitTime in my profile (/ opt/vmware/var/lib/build/profiles/myVM-v2.xml) to 60 seconds

  but the error message is always the same. Of course the build process ignores my setting...: o (())

  When I run the command above, then the first time, it takes a long time until I can see the prompt. On the second try, he'll

  fast (less than 5 seconds) until the PW prompt appears.

  * Question to determine that the good sense: *.
  
  

  ESX server have a response time of bad but why? ESX server do nothing else that commissioning and I can't

  See all problems in newspapers ESX...

  * Question how fix (workaround): *.
  
  

  What will do about the systemCmdWaitTime really?

  No help for one or the other question suggested!

  Thank you

  Thomas

  In with regards to the vadk:systemCmdWaitTime being ignored, it's unfortunately a bug that you can apply the following fix:

  /opt/VMware/lib/build/VADK/ProvInterface/Vim.pm

  my ($retStatus, $cmdStdout, $pid, $retExpObj, $savedHdl)

  = VADK::System:systemCmdWithPw($cmdStr,_$self->{&K_PROVPASSWORD},_$ovftool_exitfile,_1);

  My $sysSettings = $self-> getSysSettings();

  my ($retStatus, $cmdStdout, $pid, $retExpObj, $savedHdl) =.

  () VADK::System:systemCmdWithPw

  $cmdStr,

  $self-> {& K_PROVPASSWORD},

  $ovftool_exitfile,.

  1,

  $sysSettings-> {& VADK: constants: K_SYSCMDWAITTIME},

  $sysSettings-> {& VADK: constants: K_SYSCMDMAXTIME});

  - and -

  my ($retCmd, $cmdStdout, $pid, $expISO, $childHdlISO) = VADK::System:systemCmdWithPw ($cmdConnISO, $pw, $exitIso, 0);

  my ($retCmd, $cmdStdout, $pid, $expISO, $childHdlISO) =.

  VADK::System:systemCmdWithPw ($cmdConnISO, $pw, $exitIso, 0,

  $sysSettings-> {& VADK: constants: K_SYSCMDWAITTIME},

  $sysSettings-> {& VADK: constants: K_SYSCMDMAXTIME});

  In regards to the ESX with wrong answer while proceeding not a high load, maybe you could consider restart the ESX management agent to clear of maybe a bad state: http://vmwaretips.com/wp/2008/12/12/restarting-the-management-agents-on-an-esx-server/

• WndOws Media Player plays audio but no video

  Windows media player

  When itry to play jeuvideode file with media player, it will play audio but not the vidio but it will play the video in minimized mode, but if I try to optimize it disappears just off the coast of the screen of the monitor in the corner at the top right of the screen

  Hi John,.

  ·         Since when are you facing this problem?

  ·         You did changes to the player before the show?

  ·         This happens with any specific video?

  Step 1: Try reducing video hardware acceleration in Windows Media Player.

  a. in Windows Media Player, on the Tools menu, click Options.

  b. on the performance , under video Accelerationtab, move the slider more close votes to zero, and then click OK.

  If this allows you to play videos very well, this indicates that there is a problem with your graphics card or driver.

  Step 2: You can get an updated driver from the manufacturer of the display adapter.

• Audio but no video... WVC54GCA

  Hello!

  I've just set up a wireless G Linksys router last night. Works very well. I unplugged my laptop the router and used the wireless connection and that the excellent work.

  I bought the camera and put in place as well. I had a few problems with the installation, so I changed the IP address of the router to ".". 1 "to". 9 ". I had to do it before with DSL because of problems with the modem and reconnected my laptop with ethernet cable. For some reason, it worked. The camera then showed the "." 9' as the access point. I saved and installed the camera management software.

  This is where the problem begins:

  The camera will feed audio. The microphone works. The screen where I'm supposed to see the video does not work. He's black. I think he was using port 80. I know I should have tried to use the camera via a cat6 cable, but I did not. There is an IP address ending par.100 showing on the software which was different from my router which montrait.102. I've changed too much a.100 ou.102 nothing works.

  I'm a noob with this stuff. What I am doing wrong?

  Thank you!

  He returned, exchanged, works fine now.

• Export the basic family Vista Edition video to a projector

  I try to export video through the VGA port to a projector, but get no signal. (My computer has Vista Home Basic Edition). What should I do?

  Hi, I have this problem is solved by buying a new VGA cable to connect my computer to the projector. After that I made the connection, plugged in and turned on the projector, then turned on the computer, the system automatically sent the video signal to the projector. But thanks for writing back and try to help anyway.

• Flash 11.2.202.235 audio but no video playing in IE9

  The PC in question is under IE 9.0.8112.16421

  Windows 7 64 bit

  I installed (and reinstalled) the last flash 11.2.202.235 drive nothing works.

  I have disabled hardware acceleration

  I installed the latest drivers from the manufacturer graphics card.

  When I try to play a video on sites like youtube, the player indicates the initial frame, but then shows that the bottom (as if the player were not there at all), and plays audio only.  If I move the screen up and down (using the scroll wheel) on several occasions, the player is updated and displays an image of the video, then it goes back to the background color.

  I tested in Firefox and Chrome and the player seems to work in these browsers very well, so it's some kind of conflict with flash 11.2 and ie9

  Currently, I have three machines who are facing this problem, but this number seems to increase.  It was the week last only two.

  Do you see the same behavior both of these videos in Internet Explorer?

  Test 1

  Test 2

• Flash will load audio but not video... and then crashes...

  Flash will load the audio from a video, but the video display will be green.  The player then crashes.  Initially, this was just my videos from YouTube.com, but now I have problems with Windows Media Player Classic (and sometimes with Windows Media Player).  I tried uninstalling and reinstalling several times.  Flash is not displayed in my programs, but can I uninstall in Control Panel.

  I have Windows 7 and 64-bit.

  I use the 10.3.181.34 version.  According to http://www.adobe.com/software/flash/about/ I have a flash installed successfully.  Yes, I see the image.

  These are the files in my SysWOW64 > C:\windows\system32\macromed > Flash

  Flash10m.ocx

  FlashInstall.log

  flashplayer. XPT

  FlashUtil10u_Plugin.exe

  install.log

  Npswf32.dll

  I use Firefox 5.  Shockwave Flash 10.3.181.34 is enabled.

  I have no idea what to do. Help.

  As soon as I read 'green' in any position, the first thing that comes to mind is to disable hardware acceleration.  Right-click on the Flash Player test page and select settings.  Then on the display panel uncheck "enable hardware acceleration".