Extend the question of rights in player dynamic form?

Similar Questions

• 4520 Codian and TMS 14.4.2 Conference extend the question

  Hello

  We arrive at the question not being able to extend a call to TMS.  All the endpoints are available and there is nothing booked.  15 minutes before the end time, we receive the message on the screen, it will prompt you to extend the call.  We extend the call for 15 minutes. 15 minutes later, we get another guest to extend the call for then 15 mins.  MSDS shows the new extension and everything seems normal.  Then 1 min remaining in the appeal (top 15), audio message comes saying that the video is on the point of finishing in 1 min and a minute later, the call ends.

  Does perform a work around what we are able to extend for 15 minutes.  The 2nd expansion looks OK in TMS with the new end time, but still, it disconnects.

  4520 Codian running SW version 4.4

  Thanks in advance for your help.

  Kind regards

  Amrit

  Hello

  It comes default TMS CSCur83342, set at 14.6.

  Kind regards
  Kjetil

• Two quick questions (hopefully) - right way to dynamically change the CSS class and put of Splash screen implemented

  Couple of quick questions have left me speechless!

  So, it seems obvious that many JavaFX applications want to dynamically change the CSS styles.  Is the best way to do it through la.getStyleClass () .add ("classname") < node >?  The underlying data structure is a list of observable.  So let's say we have 5 styles that simply to change the fill color of a circle of 5 different colors, respectively.  So if I have a condition in which I want to dynamically apply 1 of these 5 styles, as I do now it's by setting all 5 styles as a string in a list by using a static initializer, then I call < node > .getStyleClass () .removeAll (list), then getStyleClass () .add ("classname").  I do this to avoid adding again and still the same style and inflate the underlying list.  What is the right way to manage dynamic CSS styles?

  Finally a very simple I think.  So I know there's a little differently to implement a splash screen.  My app has certainly got bigger in the last few months of development and I noticed there are about a 5 second delay between when I run the application when I see the main stage.  I was thinking what a splash screen would be nice to fill that time.  I had no time to prototype using a Preloader and I fear that using another, early stage start-up again would be too long of a delay.  "I actually thought that using the Nice and simple JVM argument" - splash: image name > "would be simple, easy and effective.  Unfortunately when I try to do, the splash screen appears but never goes away.  Anyone know what is happening with this?

  Your mechanism to manage the css style classes is a good approach; I've used several times. I wonder why the style classes have been implemented as a list, instead of a game, but there may be cases of good use for the use of a list.

  In some cases you can also consider using CSS PsuedoClasses, which were presented in JavaFX 8. Here is a little easier to use, especially if you have two options. But a use case might look like:

  public class Message {
      public enum Status { NORMAL, WARNING, CRITICAL }
  
      private final ObjectProperty status = new SimpleObjectProperty<>(Status.NORMAL);
      private final StringProperty message = new SimpleStringProperty();
  
      // constructor, getters, setters, and property accessors....
  }
  

  public Label createLabel(Message message) {
      PseudoClass warning = PseudoClass.getPseudoClass("warning");
      PseudoClass critical = PseudoClass.getPseudoClass("critical");
  
      Label label = new Label();
      label.textProperty().bind(message.messageProperty());
      message.statusProperty().addListener((obs, oldStatus, newStatus) -> {
          label.pseudoClassStateChanged(warning, newStatus == Message.Status.WARNING);
          label.pseudoClassStateChanged(critical, newStatus == Message.Status.CRITICAL);
      }
      return label ;
  }
  

  And then your css looks like

  .label:warning {
      -fx-text-fill: orange ;
  }
  .label:critical {
      -fx-text-fill: red ;
  }
  

• The type of menu filter in dynamic form substring matches, not complete chain; How to change?

  I used a dynamic list on one page, with filtering. One of the fields using a drop-down menu, and I discovered the drop-down list only partial match. For example, if I have values such as;

  Widget

  WidgetA

  WidgetABC

  in the drop-down list, select 'Widget' in the filter will match all three of these values. My thought is that there should be an exact match of no partial match.

  Can someone tell me where I can go to change this behavior? Thanks in advance

  DG

  The following should be considered as experimental, like it s never been documented - however, when your dynamic list to switch to the Code view, you should see a 'filter' section that starts like this:

  Filter

  $tfi_listwhatever2 = new TFI_TableFilter ($conn_conn, "tfi_listwhatever2");

  $tfi_listwhatever2-> addColumn ("tablename.columnname", "STRING_TYPE", "columnname", "%");

  the "addColumn" thing comes with 4 parameters:

  1 tablename.columnname (no need to change it, of course)

  2 data type of the current column, for example STRING_TYPE or Type_de_fichier (no need to change this too)

  3 alias the columnname (Don t change it too much)

  4 a parameter called 'compareType '.

  The "compareType" parameter is default always the value '%', which is translated internally by MYSQL´s 'LIKE' function of string comparison, which of course prevents the you´re of accurate looking for string matching.

  When you look at the 'includes/tfi/TFI_TableFilter.class.php' file, it seems that the MEASURE is supported by 4 variants of 'compareType ':

  1. the default of '% '.

  2. "A %".

  3. "%A".

  .. .which all internally translates into a comparison of strings "LIKE". But West another predefined variant which does not only:

  4. "="

  That said, please try with the help of '=' for the respective column, as I think that this should give you the exact string matching.

  See you soon,.

  Günter

• Cannot simultaneously use vector art and dynamic forms?

  I was responsible for creating an online order form, and it seems that beign able to use vector graphics is the key to the design of the form. Dynamic form elements are also absolutely necessary - all the information has to fit on one page (and fortunately, most are mutually exclusive, allowing only the fields necessary to appear).

  Unfortunately, when I do a page of the form layout in Illustrator and import it into LiveCycle, I seem to be unable to use the drawing tools (specifically, lines and text, that both I need). I tried to save the file in a dynamic form, but only the opportunity to save it as a static form is displayed.

  Y at - it something I am doing wrong, or I'm going to have to choose between the use of vector graphics and dynamic form options?

  Fix. You can import the static PDF file work and then add the form objects.

  Steve

• LiveCycle form is extended in Acrobat to rights but cannot be placed in the comments in Reader

  Hi all

  I made a form (which I saved as dynamic) and open in Acrobat to extend its rights player (I guess that's the only way to extend the rights of the player, is it not?).

  Having extended its rights of the player, I open it with the reader, but commenting is not allowed. Why?

  Thank you

  Well, the player option extend the file you have chosen is correct, but your form's dynamic XFA - Acrobat/Reader does not have the ability to add annotations on dynamic XFA-based PDF files, therefore, you do not see this option.

  If your usecase is to use annotations in the PDF file, then you can go with static (if possible) forms

  Santosh-

• I just changed my signature of account Windows Live Hotmail E-mail via the menu options, and since then, a big grey box appears on the emails that extends from left to right and is also important.

  Hello!

  A few weeks, I just change my signature to email hotmail via the menu options, and since then, a big grey box appears on the emails that extends from left to right and is also important. I went into the signing options, re-created the signature, and for 3 weeks completely removed the signature, but I always get the grey box display. Email being accessible via www.hotmail.com, and I don't have the problem, when I answer emails via my iPad2.

  Any help will be greatly appreciated, so that e-mail can be sent to the search normally. Thank you!

  Hi Paul,.

  The question you posted would be better suited to the Windows Live community. Please visit the link below to find a community that will provide the support you want.
  http://windowslivehelp.com/product.aspx?ProductID=2

• Loop slider does not appear when you move to the right of the loop; may not extend the duration of the loop; aaarrrgh.

  Have checked tutorials and help , but doesn't understand why hovering over the right angle, at the top of the track loop not give me the slider that allows me to draw on the track and extend the playback loop.

  Long kickflip is the one that gives me a problem right now, but Latin Bembe Cowbell does not work for me either!

  It is my first try at GarageBand, and maybe my last very soon.  Thanks for easy to understand help you send.

  The two loops work very well for me in GarageBand 10.1.1. Skip on the upper right corner of the audio region to display the cursor of the loop, if it is not, save your project and the test in a different project.   Restart your Mac, if you don't have already done.

  

• Mode Dual monitor: can I extend the main display from right to left?

  I have a Setup dual monitor with

  Main screen with desktop computer: Dell S42092

  Secondary display: Inspiron notebook.

  Is there a way to extend from left to right?  I wish I had my secondary screen (laptop) positioned on my left, not the right, which seems to be the only way that the configuration of the resolution of the screen allows you to do.  I currently configured as

  Display (2) Dell s24092

  Several screens: extend these screens (this allows me to drag from left to right, which is not intuitive if the laptop is on the right.

  If I can't do it with this configuration, this work with another monitor, type?

  Trudy-o

  My OS is Windows 7, but I've been to the screen "Changes the appearance of your poster" you describe.

  It identifies the laptop as monitor 1 and the S24092 Dell Monitor 2. It allows me to do 1 or 2, my main screen, but it does allow me to pass the identity of 1 and 2.   Therefore, any screen is my main screen, management of drag forces me out of the side right of the main screen (the great Dell) before entering the screen of the computer, which I turned to the left.  I am left handed and I smile with my left hand, and I'd rather have my secondary monitor to my left.  Is it makes sense?

  The identity is to tell you, visually, that is, whose number has no significance. The computer screen will always be 1 and the outside will be always high because you can not disconnect and because it will be the first computer find at boot.

  To put secondary (2) on the other side, press the image of monitors, monitor 2 drag it to the other side of the #1 and press apply then / adjust displays are flashing and if he succeeds, it will appear a window with a 15 seconds timer to reset the display if no one pressed the Yes button.

  Basically, you want to match the image with your configuration.

  I'm left-handed too, but use the mouse with your right hand. and I have a laptop with Vista and an external monitor (primary) to the left of the laptop.

• Windows Media Player error message says that I don't have the media usage rights acquisition.

  Original title: Windows Media Player

  Am not able to play music in Windows Media Player to the library after the transfer of music from another computer.  Error message says that I don't have the media usage rights acquisition.

  Hello

  Thanks for posting your query in Microsoft Community and we give the opportunity to help you.

  Cause of the error:

  Windows Media Player uses Microsoft Digital Rights Management (DRM) to protect the rights of content owners who protect their music or video products in this manner. You must have usage rights required to play, burn, or sync protected content.

   

  How to upgrade the DRM license?

  By default, Windows Media Player will automatically attempt to acquire the rights of use in silence unless the server requires some input on your part (for example, registration or tax information). You can disable the automatic rights acquisition. In this case, you will be asked to obtain the rights for any new content that requires them. To prevent Windows Media Player from acquiring rights automatically, do the following:

  a. click on the arrow on the now playing tab, and then click Other Options.

  b. click on the Privacy tab, and clear the automatically check if protected files need to be refreshed check.

  Please note that this setting affects not acquisition of rights of use of online stores.

  Which settings affect privacy in Windows Media Player?

  http://Windows.Microsoft.com/en-us/Windows7/which-settings-affect-privacy-in-Windows-Media-Player

  To upgrade the security for your digital media player component, see:

  The security component upgrade

  http://drmlicense.one.Microsoft.com/Indivsite/en/indivit.asp

  This page allows you to upgrade the components of security of your digital media player to play the files on your computer.

  Hope this information helps. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• Hi everyone, Im fairly new to photoshop.   Can question, I extend the width of a picture beyond its original size by using the clone tool or other tools?

  When I learn how to add pictures here, I'll do.

  Thank you

  Suzanne

  suzanneck wrote:

  When I learn how to add pictures here, I'll do.

  Thank you

  Suzanne

  Hi Suzanne

  It would certainly help if you put the image up on the forum.   Right click and choose copy, and then paste this topic with ctrl v (v Cmd)

  There are different ways to fill the extra canvas when you added it.  Content Aware Fill is good, but it depends on the content of the original image, to stick it the image here for the best advice.

• Dynamic forms and older versions of the player

  Hello

  Is there any plan to never go out a newer version for linux, or all least, one who takes care of dynamic forms?  I also note that older Macs will have the same problem...

  I seeks to view/fill in the form on the next page, but will probably need to borrow a computer of a person to do.

  http://www.legalaid.on.ca/en/info/panel_standards.asp

  Really?  The most recent version available for linux is 9.5.4...

  See you soon,.

  S

  Thank you, you'd be surprised how many messages that we who are not on the drive at all.

  Okay, that's interesting. For me, this means two things:

  1 Linux Reader never included support XFA (possible but surprising; I have not been able to research this one way or another), or

  2. the Linux package you use is only partial. I've heard problems with the bits being left out before, so take a peek at all the available packages, or try a different package.

  There is a little dusty Adobe Reader for Linux forum where someone could pass the answer too.

• Right-click on the question of datagrid

  Hi guys

  I try to get the columnIndex on right-clicking on a datagrid control, so that I can use when I select an item in my custom contextMenu.

  Currently...

  data_grid.addEventListener (ListEvent.ITEM_ROLL_OVER, dataGridRollOver);

  private void dataGridRollOver(event:ListEvent):void {lastRollOverRow = event.index;}  lastRollOverColumn = event.columnIndex; }

  Then I use in my contextMenu feature, lastRollOverRow, and lastRollOverColumn

  It works fine if I right click, select a contextMenu option, then choose another line and repeat etc...

  However, say I decide right click, I clicked on the wrong column, don't choose anything in the contextMenu and then my next action is to right click on the right column - the event listener above does not yet (I guess because the contextMenu has focus), so my vars not updated.

  Is there a way to give focus to the DG on a consecutive right click before re - display the contextMenu?

  I noticed that I don't need to set up an event listener to catch the right click for contextMenu of datagrid. Is there something I can change if I can do something first before the contextMenu pops up?

  Cheers for your help.

  You are in a catch22. The context menu is highest level last chance to Flash for a user to configure the plugin. It's like trying to disable the start menu in Windows. It is designed to have priority. There is no programmatic way in AS3 to hide the context menu, only to change the content. Otherwise people will abuse it.

  I've seen a few attempts at JavaScript/ExternalInterface workaround who work only, but because you're plugins of various natures (ActiveX/Plugin) and the differences between browsers, they can be difficult to make it work properly.

  The only option I have ever had to work was to have JavaScript intercept the click-right, stop the spread (so Flash never received), use ExternalInterface to send an order from JavaScript to Flash with the click information, then have Flash handle.

• LiveCycle Form - extend the functionality to the player to allow save

  I created a PDF form in LiveCycle Designer ES2.  I want to enable users to update form and save, but I cannot find a way to extend the functionality of LiveCycle.  I can open the PDF form in Acrobat X Pro, but when I try to change I am forced to use LiveCycle Designer.  There is no option to edit in Acrobat X Pro.

  Acrobat X Pro used:

  File > save as > Reader Extended PDF

• Why is there no tab "Privacy" in the menu 'Tools' to Media Player 11?

  I'm trying to deal with DRM problems, but when I try to check the privacy settings, I find there is not tab 'Privacy' in the menu 'More Options'. How can I solve this problem?

  Hi KenEdwards,

  I suggest to follow the steps below and we update on the State of the question.

  Method 1:

  Uninstall and reinstall Windows Media Player to Windows features turn on or off.

  Follow these steps:

  (a) click Start, type the turn Windows features on or off in the start search box and press enter.

  (b) uncheck the multimedia functions.

  (c) restart the computer and follow the same steps to reinstall Windows Media Player.

  For reference:

   

  Enable or disable Windows features:

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

  Method 2:

  Follow the steps in the below links for digital rights management (DRM) issues.

  The Player Windows Media DRM: frequently asked questions:

  http://Windows.Microsoft.com/en-in/Windows-Vista/Windows-Media-Player-DRM-frequently-asked-questions

  When you try to use Windows Media Player 11 to play a digital camera digital rights management (DRM) - multimedia file protected, the media can not play:

  http://support.Microsoft.com/kb/925705

  I hope that the information above helps you.