extended display

Similar Questions

• extended display iMac

  After the recent updates, my extended display has ceased to display. It is recognized, and if switched off/on it will display and then fade. If I can get a context menu to the top and make a selection in these few seconds, it will stay the rest of the session. Any ideas?

  iMac early 2008, 4GB, Yosemite 10.10,.5 - Hanns-G 19 "1440 x 900

  guess I would try to reset the pram How to reset NVRAM on your Mac - Apple Support

  use an imac21 2011 and always used external display by using the CT-> dvi and never had any problems with any version of osx Lion at captitan

• extended display problem

  Hello, I have a p7-1235 HP with AMD A8-5500 3.2 Ghz and Radeon HD D 7560, it's about 3 months with an Acer H233H as the main (DVI analog) and an older Samsung 223BW (VGA) as a secondary screen. A week ago that the Samsung show the extended desktop after being off for a few hours, if it's after a cold start or windows it turns off after 30 minutes of activity. But if I push the power on and off the Samsung button, the screen is restored.

  The strange thing is that the display is active in the boot process, start the windows message appears, but once that windows 7 is the Samsung needs to have the power button through the boot process / bike off then turn it back on before you post again. However if I turn off the computer for an hour and a restart round both monitors are working fine.

  I read on a forum of HP that I should do a system restore to a time when I knew that the system was working so I did it and still have the same problem.  So I guess that's not windows. I make the false assumption that you think.

  If the hardware is the issue, is it more likely the MB video card or the monitor itself?

  Thanks for any help.

  Hello kevn57
  
  To help identify the problem have you tried another monitor? This will remove the current monitor as the culprit. What current readers for the Radeon HD 7560D? The drivers may not be correctly wake up the monitor. The problem could be the cable as well, so before exchanging the monitor, you should try another VGA cable.
  
  I start with the monitor and cable first of all they are easier to isolate.

• Validation on extended display controller Error Message While

  I display error message when click on apply button Using code below for that.

  I need to add a validation in the code below could you please help on this one where I can add that validation.

  There is the POPUP, POPUP list that list of three values in three when I select = CAR submit then only our error messages will be displayed. Where can I add this condition to the code below.

  ///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////

  package wgt.oracle.apps.pa.project.webui;

  to import java.sql.CallableStatement;

  import java.sql.Types;

  Import oracle.apps.fnd.framework.OAException;

  Import oracle.apps.fnd.framework.server.OADBTransaction;

  Import oracle.apps.fnd.framework.webui.OAPageContext;

  Import oracle.apps.fnd.framework.webui.beans.OAWebBean;

  Import oracle.apps.pa.project.webui.ProjectChangeStatusCO;

  SerializableAttribute public class XXEXProjectChangeStatusCO extends ProjectChangeStatusCO {}

  public XXEXProjectChangeStatusCO() {}

  }

  ' Public Sub processRequest (pageContext OAPageContext, OAWebBean webBean)

  {

  super.processRequest (pageContext, webBean);

  }

  ' Public Sub processFormRequest (pageContext OAPageContext, OAWebBean webBean)

  {

  String p_final_count = null;

  String s = (String) pageContext.getSessionValue ("paProjectMode");

  String p_project_id = (String) pageContext.getTransactionValue ("paProjectId");

  String projectId = (String) oapagecontext.getTransactionValue ("paProjectId");

  If (PageContext.GetParameter ("Apply")! = null)

  {

  pageContext.writeDiagnostics (Thi, "line number 39", 4);

  OADBTransaction tx = pageContext.getRootApplicationModule () .getOADBTransaction ();

  pageContext.writeDiagnostics (Thi, "line number 41", 4);

  String sql = "START" +.

  "xxgb_proj_validations_proc ("+ ".

  ' p_project_id = >: 1 +,

  "(p_final_count = >: 2) +;

  'END;';

  pageContext.writeDiagnostics (Thi, "line number 47", 4);

  CallableStatement cStmt = (CallableStatement) tx.createCallableStatement (sql, 1);

  if(cStmt!=null)

  {

  try {}

  cStmt.setString (1, pageContext.getParameter ("paProjectId"));

  pageContext.writeDiagnostics (Thi, "line number 54", 4);

  pageContext.writeDiagnostics (this, "Project ID" + pageContext.getParameter ("paProjectId"), 4);

  cStmt.registerOutParameter(2,Types.VARCHAR);

  cStmt.registerOutParameter (2,99999);

  cStmt.execute ();

  p_final_count = cStmt.getString (2);

  pageContext.writeDiagnostics (this, "p_final_count" + p_final_count, 4);

  cStmt.close ();

  pageContext.writeDiagnostics (Thi, "line number 60", 4);

  }

  catch (System.Exception e)

  {

  throw new OAException ("Two validations failed" + try (), OAException.ERROR);

  }

  pageContext.writeDiagnostics (Thi, "line number 63", 4);

  }

  {if (p_final_count.equalsIgnoreCase("99999"))}

  throw new OAException (p_final_count, OAException.ERROR);

  throw new OAException ("the model CAR Excel and approvers of CAR are not attributed to the Project.Please attach the CAR Excel template and assign approvers of a CAR.", OAException.ERROR);

  }

  {if (p_final_count.equalsIgnoreCase("999"))}

  throw new OAException (p_final_count, OAException.ERROR);

  throw new OAException ("CAR accessory is not available.")  Attach the Excel CAR model for the project. ", OAException.ERROR);

  }

  pageContext.writeDiagnostics (Thi, "line number 65", 4);

  {if (p_final_count.equalsIgnoreCase("9999"))}

  throw new OAException (p_final_count, OAException.ERROR);

  throw new OAException ("CAR approvers are not assigned.") (Allow the approvers of the Project", OAException.ERROR);

  }

  pageContext.writeDiagnostics (Thi, "line number 67", 4);

  {if (p_final_count.equalsIgnoreCase("1"))}

  throw new OAException (p_final_count, OAException.INFORMATION);

  throw new OAException ("success", OAException.INFORMATION);

  super.processFormRequest (pageContext, webBean);

  }

  pageContext.writeDiagnostics (Thi, "line number 67.1", 4);

  }

  pageContext.writeDiagnostics (Thi, "line number 69", 4);

  super.processFormRequest (pageContext, webBean);

  / * {else}

  super.processFormRequest (pageContext, webBean);

  }  */

  pageContext.writeDiagnostics (Thi, "line number 71", 4);

  }

  }

  //////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////

  Try to get the selected value of the populist in your controller. So according to you, value run your code.

  You can get the values of poplist in 2 ways.

  1. If the poplist is associated with a VO, get the value of the attribute of the VO.

  2. you can use pageContext.getParameter ("").

  check if the value is "AUTO Submit", then run your code.

  It will be useful.

  See you soon

  AJ

• Branch 2 iMacs to create the extended display

  I have a Mid 2011 21.5 iMac and an iMac Mid 2014 21.5. Can I use the mid-2014 as expands the display of my Mid 2011?

  Use your iMac as a display with the target - Apple Support Display Mode

• AirPlay expose works such as extended display but will not itunes library flow

  On a MBP and can use my apple TV as office extended, but if I try to stream a video from my iTunes library I get an error message saying: the network connection has expired. That happen all the time and sometimes it works perfectly, sometimes may take 3 or 4 attempts to disseminate and sometimes it is not matter what I do (including Apple TV restarting, MBP etc.) it will not work. Even when it does not work, I can use the air game screen to show my desktop etc on the TV via Apple TV, and I can also just mirror my phone or my ipad at any time without any problem. All software are up to date on my MBP and Apple TV. Everything starts to get really annoying when trying to watch videos at home etc and not be able to. One is able to offer a solution?

  Looks like you're using Airplay and trying to play iTunes content and watch via Airplay.

  If so, you would be better using the part of the House and streaming videos like this.  It uses the buffering and is less than half a load on your network.

  Using Airplay does not tax these as your network and buffer.

  Use home sharing to share content with other devices - Apple Support iTunes

• Two monitors will not show extended display

  I just bought a HP Envy 7000 with two dell monitors. In addition, I bought a DVI - D splitter and two monitor DVI - D cables to connect the monitors. The two monitors work, but he won't show a mirrored display.  It is the splitter I bought for connections. http://www.Amazon.com/STARTech-com-DVISPL1DD-1-feet-digital-splitter/DP/B00111EMMO/ref=sr_1_1?ie=UTF...

  Any help solving this issue is appreciated.

  Hello

  Install Windows 8.1 8.1 Intel video driverthat is displayed for your PC.

  Review of this article on the use of two monitors HP.

  You should also check in the Intel Graphics Contol Panelfor adjustment of the extension.

• Office extended; display does not display, image too large, not centered

  Hi, I know that it is apparently a matter of stupidity, stupid with a solution obvious but wait - I'm not a

  full retard. I already did all the utilities to change screen resolution and checked the settings

  for the "Display".  I've updated all the drivers, checked the compatibility, etc. Basically, I have tried everything I can think

  and yet my desktop image lying on my 37 '' Sceptre flat screen TV is not placed correctly / size right.  I can't

  See the entire desktop (as appearson the screen of my laptop).  The whole picture is fire too far to the right (in front of the tv),

  leaving an area 3' black on the side left which is unaccessable to my cursor.  Size of the window when on the internet is too large for

  access the menu items. The window is stretched too long in width and too short in length; content is not distorted.  One

  monitor only - once identified, the 1 appears on both screens. 1 is the primary monitor. Its driving me crazy - it's

  something I should have been able to take care of myself, but I give up. Any help would be appreciated a lot.

  Hi Ankhisis,

  ·         What is the brand and model of the computer?

  ·         Did you do changes on the computer before the show?

  Check the status of the display driver in Device Manager:

  a. click on Start

  b. in the run box, type in devmgmt.msc

  (c) in the Device Manager window

  d. expand graphic cards

  e. check if an error code is listed.

  Follow the methods below:

  Method 1: You can see the below mentioned article Microsoft Knowledge Base and check if the problem persists.

  Resources for troubleshooting problems in Windows XP

  http://support.Microsoft.com/kb/307960

  Method 2: You can also try to change the manual steps of resolution screen and check the results.

  To change your screen resolution

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/display_change_screen_resolution.mspx?mfr=true

  Let us know if it helps.

• Extended display not showing THE Content

  If I open an application in a window that is on my main screen, it opens very well and allows me to enter data.

  If I can move this window to my 2nd monitor on my long office it does not enter data, the fields are there, it will hit not only me.

  I use a USB VGA adapter to give 3 monitors on a laptop. The problem is with the USB screen.

  I tried, new video drivers, older video drivers.  Different brands and models of USB adapter and different monitors.

  Any help would be appreciated.

  Mark

  Hello Mark,

  Thanks for posting your question on the Microsoft community.

  We need more information about the issue so that we can help you better.

  What is the brand and model of your computer?

  Thank you for details on the question and your efforts to resolve.

  This problem can occur because of incorrect display settings or the corrupt display driver.

  I suggest you run the hardware and devices Troubleshooter and check.
  Reference:
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  It checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.

  Also I suggest you try to reinstall the driver to view in compatibility mode and check the issue.
  Reference:
  Make older programs in this version of Windows
  http://Windows.Microsoft.com/en-us/Windows/make-older-programs-run#1TC=Windows-7

  Note: Please see "to change compatibility settings manually" section.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Is it possible to have the Extended display to make the loop of the cursor?

  Usually, the presentation of the screen is like this:

  Screen 1, screen 2

  by pushing the mouse to the left of the screen 1, or the right of the screen 2 ends up having stuck mouse
  Is it possible to have the loop of the mouse between the screens if you cross the edge (or possible even high-low)?

  Hi Mathieu,

  (1) what is the brand and model of the computer?

  (2) are you referring to two monitors?

  (3) the mouse stuck in second monitor?

  If you are referring to two screens, I suggest you follow the steps below to update the graphics cards.

  Update Device Manager graphics card readers:

  (a) press the Windows key + R, type devmgmt.msc.

  (b) extend graphics cards.

  (c) click on properties, click the driver tab.

  (d) click the Update Driver button.

  (e) click on the OK button.

  It could be useful, if the problem persists, I suggest you post a screenshot.

  See the article given below to send us a screenshot.

  Take a screen capture (print your screen)

   http://Windows.Microsoft.com/en-us/Windows-8/take-a-screen-shot

  How i: post a screen shot on this forum:

   http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/how-do-i-post-a-screen-shot-on-this-forum/c86de820-C620-401c-A804-9f6337cd3053

  Post the screenshot us if the problem persists, we will be happy to help you.

• can even extend display id more than 1 x?

  Hi all

  is it possible to have the display of more than 1 x scope id (1 appears but not the following one) without javascript additional document.getElementById('name2***').textContent = "bob";?

  HTML...

  1 - the name is < span id = "name" > < / span >

  
  

  This does not show 2nd time
  

  2. again, the name is < span id = "name" > < / span >

  < script >

  document.getElementById('name').textContent = "bob";

  < /script >

  ID = a unique login.  No matter what it is used on - div, span, p etc...  It can be used only 1 time per page.  This is the absolute & written in stone.

• Problem with the extended help display option for multiple displays.

  I have a laptop with an internal (#1) designated as my screen main screen. At work, I like to use the 'extended display' option for several screens to use the external desktop as #2 display monitor. However, at home I have the screen internal one on my laptop. So when I open an application like Excel at home, the window does not appear, but the application is running, as I confirmed with the Task Manager. So far, the only way I know to solve this problem at home is to change my display settings for multiple views to show on display #1 only. Is there a practical way to deal with this issue in addition to change the display settings whenever I move from work to home and vice versa?

  Hello

  In Windows 7, you can simply press the Windows Logo + P key.

  In the menu, select the item from the computer only .

  Concerning

• Taskbar Windows 8 may become visible even in full screen display to extend

  I had an extended display
  The second screen is called to play a video in full screen
  The taskbar are hidden properly at this point, behind the video
  Then on the main screen, I click on the task bar it. The taskbar becomes visible on both screens.
  To remove the taskbar in the second screen, I have to click the second screen (in this case pause/play the vacuum).
  In my view, that he is some sort of bug.

  Hi man,
  First of all, I would like to know if the question is limited to the video player:
  You can search for "taskbar" without quotation marks in the start screen and select "Task bar" in the settings.
  There, check "auto-hide the taskbar."
  Move the mouse over the taskbar on the main screen and see if it appears on the secondary.
  In addition, if the problem is with only the video player and you are having problems because of this, try another player.
  If the same thing happens with auto-hide, it can either be a feature or a bug.

• iMac 5K (2016) will not all wake up with connected external display

  I have an iMac 27 "5K nine. My first Mac from Windows - it was a world of frustration and then most of the things I re-learned or found of alternatives for, I have a major problem of the iMac not wake from sleep. It took days to change things and we cut the field down to discover is an external monitor at the origin of the problem.

  I have a LG 23MP75 IPS monitor hooked up to 90 degrees. This is a debugging, screen bash and the cat. So I develop sites on the main iMac screen in the Sublime editor and also check the sites in the browser, and then on the external I Inspector chrome, terminal and Skype/cat stuff. When the device is connected, it works well, no problems. If she goes to sleep for a short period of time like 30 minutes or less, he wakes up. If he goes into a deep sleep (hibernation?), he don't wake. Sometimes holding the key ctrl + p + r, cmd and press work but mostly not, usually I have to pull on the power cord! for a restart. Heart-wrenching. The only solution at the present time it unplug the HDMI until I go home every day.

  The external monitor is connected through a HDMI cable that is routed into an 'active' HDMI mini-Display port adapter. I was told that the adapter is active is important after I had one active and bought assets to try to solve this problem. I read that the removal of the hibernation file may contribute to allow OS x to replace but I opened it instead and it is empty so not corrupt (sudo rm/var/vm/drag).

  If I stop and restart, the login screen is badly laid out, it has mirrored screen not extended display which is how it is implemented. See the images to compare. This makes me wonder if part of the problem is OSX being unhappy with the configuration of the monitor outside being connected?

  

  

  Here is the screen set up the config so you can see that there is nothing out of the ordinary:

  

  

  There is no strange configuration, the machine was brand new from Apple themselves, by default on the box, no restoration or something like that as I'm new to Mac.

  Can anyone offer any suggestions to fix the problem so I didn't either unplug the cable or the stop (which brings me to see the connection in horrible mirror every morning)? Any help would be greatly appreciated.

  You have 90 days of free telephone support, AppleCare, called Apple to discuss and see what solution they have? If you weren't aware that you had 90 days of support AppleCare please click on http://www.apple.com/support/complimentary/. In addition, if you haven't already, I highly recommend buying AppleCare, that extend the warranty to 3 years and 3 years of phone to provide support. If your machine ever needs repair (lets hope he never does) AppleCare pays for itself almost always on the first incident.

• Right-click menu that is displayed does not correctly

  I use firefox 17.0.9 ESR and extended display Windows, I have two screens, one is on 1440 x 900 and the other on 1920 x 1080, if I right click anywhere on the browser when it is on the small screen, everything works as expected, if I pass the browser to the bigger screen and click right I sometimes the menu Sometimes it shows and hide immediately and sometimes just won't show, if I move the mouse on the menu it shows yet once and then hides, this only happens when I move the browser to the larger screen

  Hello, this is perhaps a problem with hardware acceleration - please try to update your video driveror where this does not solve the problem, or there is no new version available at the time, disable hardware acceleration in firefox > options > advanced > General.