Extending from af | inputText:disabled: content

Similar Questions

• Where can download Adobe photoshop CS3 extended from the internet - I need to reinstall on a new calculated that doesn't have a CD player!

  My calculated new does not have a CD player and to transfer the software on a key USB is not working even after disabling of the software on the old computer.  Download Adobe photoshop CS3 extended from the internet?

  Make sure that you have enabled cookies and clear your cache.  If he continues to not try to use a different browser.

  Here is an alternative download...  You can download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS3 and CS4: http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html

• no more WiFi which extends from the airport express and Time capsule

  I have no more WiFi which extends from the express airport and Time capsule.

  and once it worked...

  airportconfiguration-app also works, but the graphic display allows to have a straight white line. now, it's one interrupted...

  Your unbroken lines in airport show connections ethernet utility... broken lines show the wireless connections.

  So it depends on the extend method you used.

  I think at this moment, things are configured wrongly... for some strange reason things happens and elements on a stand-alone basis, return to a default mode.

  The best way to manage it is full factory reset on everything... and repeat the installation.

  I have no more WiFi which extends from the express airport and Time capsule.

  It seems to me that you extend a NON-APPLE router... in this case, your Apple routers must connect by ethernet and create a wireless network. Routers Apple cannot extend the NON-APPLE router wired.

  The express could extend the TC or visa versa... by wireless...

  Then I suggest say us what is the main router in the network?

  You have connected by ethernet to the TC or Express or both?

  If so please reset completely the two elements and try again. Make sure they are in bridge mode... It's the network tab. Router Mode is turned off.

  

  And your wireless tab is configured to create a wireless network...

  Use the same name (SSID) and even the security setting and the password as the main router to network roaming (extend wireless ethernet).

  If the Express and transport CANADA are the same, both will have this configuration... If the express extends to wireless then it should NOT be connected to all the way to ethernet... (sequel to wan side at least) and it will be set to expand wireless on the wireless tab.

• ScrollBar not appearing in the screen that extends from screen

  I'm trying to find a way to put a section not scrolling at the top of a screen that extends from my screen applications.

  final ListScreen class extends ListFieldCallback implements screen
  {

  private ListField _itemListField;
  private LabelField listHeader.

  public ListScreen()
  {

  newScreen = new MainScreen(MainScreen.NO_VERTICAL_SCROLL |) Manager.HORIZONTAL_SCROLL);

  in the example

  HorizontalFieldManager columnHeadingHolder = new HorizontalFieldManager (HorizontalFieldManager.NO_HORIZONTAL_SCROLL
  | HorizontalFieldManager.NO_VERTICAL_SCROLL | HorizontalFieldManager.USE_ALL_WIDTH);

  columnHeadingHolder.add (listHeader);

  DataScroller VerticalFieldManager = new VerticalFieldManager (VerticalFieldManager.VERTICAL_SCROLL
  | VerticalFieldManager.VERTICAL_SCROLLBAR);

  dataScroller.add (_itemListField);
  }

  }

  The problem I have is the screen is white but if I click on the wheel the menu and when I close the screen menu appears finally.

  Tried several methods to extend the screen but can't get right.

  You can still use setTitle.  Instead of adding a field, add a handler with your inside headers.

  This works very well for me, but there is a "border" between the title area and the portion of scroll, which varies according to the level of the BONE, and you might not like the look of it.

  If this does not work, then one way I know is to add a fixed height of VerticalFieldManager to the main part of the screen - with the height set so that it fills the part of the screen that you left your title and headers.  But when I played round with it, I can't scroll bars to appear.  Probably something Style that I've not set correctly.  The following are examples which limits the height to a maximum of 3 lines.  This code only works for a line of fields as I'm sure that you number from the code.

  VerticalFieldManager vfm = new VerticalFieldManager(Manager.VERTICAL_SCROLLBAR | Manager.VERTICAL_SCROLL) {
      int maxHeight = this.getFont().getHeight() * 3;
      public int getPreferredHeight() {
          return this.getFont().getHeight() * this.getFieldCount();
      }
      protected void sublayout(int width, int height){
          super.sublayout(width, height);
          setExtent(width, Math.min(maxHeight, this.getPreferredHeight()));
      }
  };
  

• I just changed my signature of account Windows Live Hotmail E-mail via the menu options, and since then, a big grey box appears on the emails that extends from left to right and is also important.

  Hello!

  A few weeks, I just change my signature to email hotmail via the menu options, and since then, a big grey box appears on the emails that extends from left to right and is also important. I went into the signing options, re-created the signature, and for 3 weeks completely removed the signature, but I always get the grey box display. Email being accessible via www.hotmail.com, and I don't have the problem, when I answer emails via my iPad2.

  Any help will be greatly appreciated, so that e-mail can be sent to the search normally. Thank you!

  Hi Paul,.

  The question you posted would be better suited to the Windows Live community. Please visit the link below to find a community that will provide the support you want.
  http://windowslivehelp.com/product.aspx?ProductID=2

• Can photoshop (Extended from Photoshop CS6) works on Windows 8.1 64bits?  How to pass Windows 7 to 8.1 64 bit?

  Can photoshop (Extended from Photoshop CS6) works on Windows 8.1 64bits?

  How to pass Windows 7 to 8.1 64 bit?

  System requirements | Photoshop

  FREQUENTLY ASKED QUESTIONS | Adobe Creative Suite

• Why 'Show items from subfolders' is disabled during the search?

  When you view a folder with several subfolders, the command 'Show items from subfolders' is available and I can show all files (10000 +) as a "flat" list However, if I type a keyword in the search box on the toolbar, the command 'Show items from subfolders' is disabled. It's a big problem for me when, for example, I want to see all the photos that have "ski" or the name of file or in one of the keywords without having to open each subfolder.

  Is there a reason that the subfolders option is disabled? Is there a solution?

  Thank you.

  Bit confused here.  When I do a search, the results of all the folders and subfolders are on a single page.  Say you get search results are presented to you by the records?

• The page height is adjustable so that it extends from the content and either?

  I'm building a site that doesn't have a lot of content. I have a background color of the browser and the substantive pages is white. When I view the site on a large monitor the height of page will extend up to the browser, and I find myself with all that white empty space at the bottom. Is there a way to Muse to set the height of the page so that it extends only where content ends and not further?

  I appreciate your help! Thank you!!!

  Hello

  Can you go to file-> Site properties and disable "Sticky Footer", and then preview the site to see if it is what you want?

  I hope this helps.

  See you soon

  Parikshit

• How to do the folding spry content appear / extend from the top of the tab - not down?

  I hope that this issue is not its confusing.

  When I click on the collapsible tab, I want the content to appear from the top - not the bottom. (See link: ) http://www.longhollow.com - click on "Time and place" on the top right and you'll see the content appear on the top). Do you know how to do this? I'm not an expert on jquery, I would appricate if you know how to do this.

  Thank you!

  Christie

  Adobe Spry has dropped towards the end of last year after CS6 is released.  Future products will probably not any Spry to learn how to use jQuery is a valuable skill to have for the future.

  It is not difficult to do what you want with a simple swap function.

  http://jsfiddle.NET/NancyO/MdSTW/7/

  Nancy O.
  

• Extending from UIComponent - behavior FocusEvent

  Target: UIComponent is extended in a custom control and identify it receives and loses focus.  The contents of the control change depending on whether it has focus or not.

  Problem: with the following code, when the label of the control is clicked, the focus receives control and changes its content being displayed correctly.  However, when the second label is enabled, both labels become visible.

  Question: is there another way to create a custom control and dynamically vary the content based on its status?

  public class CCustomControl extends UIComponent
  {
      private var cntMain1:Container;
      private var cntMain2:Container;
  
      public function CCustomControl()
      {
          //*******************************
          cntMain1 = new Container();
          cntMain1.flow = ContainerFlow.VERTICAL;
          cntMain1.debugColor = 0x0000FF;
          cntMain1.setSize(300, 200);
          cntMain1.visible = true;
  
          var lblBeer:Label = new Label;
          lblBeer.text = "Beer is Good";
          lblBeer.autoSize = TextFieldAutoSize.CENTER;
          lblBeer.setSize(lblBeer.textField.width, lblBeer.textField.height);
  
          //*********************************
          cntMain2 = new Container();
          cntMain2.flow = ContainerFlow.VERTICAL;
          cntMain2.debugColor = 0x0FF00;
          cntMain2.setSize(300,200);
          cntMain2.visible = false;
  
          var lblSyrup:Label = new Label;
          lblSyrup.text = "Maple Syrup is Great";
          lblSyrup.autoSize = TextFieldAutoSize.CENTER;
          lblSyrup.setSize(lblSyrup.textField.width, lblSyrup.textField.height);
  
          //*********************************
  
          cntMain1.addChild(lblBeer);
          cntMain2.addChild(lblSyrup);
          this.addChild(cntMain1);
          this.addChild(cntMain2);
  
          this.addEventListener(FocusEvent.FOCUS_IN, GotFocus);
          this.addEventListener(FocusEvent.FOCUS_OUT, LostFocus);
  
          super();
      }
  
      private function GotFocus(e:FocusEvent):void{
          trace(TextField(e.target).text + " Got Clicked");
          cntMain1.visible = false;
          cntMain2.visible = true;
      }
  
      private function LostFocus(e:FocusEvent):void {
          trace(TextField(e.target).text + " Lost Focus");
          cntMain1.visible = true;
          cntMain2.visible = false;
      }
  }
  

  public class ContainerTest extends Sprite
  {
      public function ContainerTest()
      {
          var uiControl:CCustomControl = new CCustomControl();
          this.addChild(uiControl);
      }
  }
  

  Hey,.

  first of all, great thread format. Everything is super clear, formatted and buried on - Yes Bravo to that!

  as for your problem, from the looks of it you add both of the listeners to the UIComponent. whats happening is that the two events are triggered when you perform an action. in order to counter record, you can change your tune-up for this function:

  private function GotFocus(e:FocusEvent):void{    trace(TextField(e.target).text + " Got Clicked"); cntMain1.visible = !cntMain1.visible; cntMain2.visible = !cntMain2.visible;}
  
  private function LostFocus(e:FocusEvent):void {   trace(TextField(e.target).text + " Lost Focus");  cntMain1.visible = !cntMain1.visible; cntMain2.visible = !cntMain2.visible;}
  

  This will actually change visibility in front of what he was and is more compatible. hope that things cleared up. I'm a bit confused as the goal, but what I see, I think that's what you want to do. test out and hopefully it works for you. Good luck!

• BlackBerry smartphones cannot update Apps in Appworld on desktop, get the message "disable content protection."

  Hello

  I have the BB Pearl 9100 with OS 6.0.0.723. I try to update/install Apps via the desktop, but every time that I try to do that I get a message "content protection is enabled on the device, please turn it off & try again.

  But the content protection is disabled in Options-> Security-> Encryption (the device memory & Media card both are disabled for encryption). I disabled all the options out there, but still, I get this weird message which is not let me update my applications.

  Help, please!

  Thank you.

  Cama1979

  Try to reset the BB by pulling on the battery or restore factory settings
  First try a battery pull (remove the battery with power and wait about 30 seconds and then replace the battery in the camera) and then try to install it from App World. If that fixed it, try to go through some steps below.

  http://BTSC.webapps.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB18998

  You will also need administrator rights on your PC (Windows 7) to install the plugin.
  If not try this

  Create a new user account on your computer with ADMINISTRATOR privileges and download the latest version of your favorite browser, Chrome or FireFox

  Now, go to this Web site
  http://appworld.BlackBerry.com/WebStore/

  You be asked to download the PlugIn once again.

• ADF InputText Disabled = True, ValueChangeListener do not call

  Hello

  I use JDev 11.1.1.7

  There is a text of entry in my jsff and he disabled = true property with the property value change listener and it is not the call. But if I set disabled = false, it works.

  Why this is happening?

  < af:inputText label = "#{portalextensionBundle.TOPLAM_MIKTAR} '"

  ID = "it10.

  contentStyle = "width: 100px;"

  Binding = "#{pageFlowScope.MainBean.itToplam} '"

  partialTriggers = 'it5 it9.

  disabled = "true".

  autoSubmit = 'true '.

  autoSubmit valueChangeListener = "#{pageFlowScope.SeyahatMasrafBean.valueChangeListenerToplam}" = "true" > "

  "< af:convertNumber pattern =" #. ## »

  messageDetailConvertPattern = "#{portalextensionBundle.L_U00FCTFEN_FORMATA_UYGUN_GIRI}" / >

  < / af:inputText >

  Thank you

  I know that it cannot be changed by the user; but I'm updating value by entering text with sum other values. So he has a partial trigger. My question was why it isn't working valuechangelistener, because the value is changing.

  Value change events should be fired only on the evolution of the direct value by the user (Yes, there is a way to trigger this event programmatically from code, or as some "side effect", but there is generally bad practices that indicate that something is wrong with your code)

  If you want to run the code in several places (in your example, when the value is changed in inputText1 or inputText2), then move this code to the procedure and call this procedure from two places.

  Dario

• What is this empty box that extends from the address bar?

  I just downloaded the version of Aol of Firefox and this empty dialog box descends from the address bar. Then, I am unable to do anything with the page.
  What should I do to get rid of this thing?

  Disable the add-on AOL until AOL will fix it.

• Thunderbird prevents mail from yahoo to email content analysis?

  Mail Yahoo and g-mail scan the subscribers email content and the content of emails sent to subscribers. I think that it is a violation of privacy, I can't live with that. Thunderbird prevent Yahoo from the analysis of the content of the emails?

  Is thunderbird software to access the e-mail but not email? Please explain if one needs an another e-mail or not, just thunderbird.
  Thank you
  C. Chronis

  Thunderbird is the e-mail client software and not a supplier. It allows you to connect to your server from suppliers and manage your emails. It does not prevent your provider to do anything.

• Photos cannot be opened because of a problem. Dyld error message: not to load the library: /Library/Frameworks/iTunesLibrary.framework/Versions/A/iTunesLibrary referenced from: /Applications/Photos.app/Contents/MacOS/Photos reason: image not found

  Photos perfectly fine for a while - also works with IOS El Capitan. Today I can not open, and the above message appears. Can someone help me solve this problem

  Is your iPhoto iPhoto 9.4.3 or iPhoto 9.4.5 version?

  Then iPhoto crashes because Google Maps servers are no longer available.

  So look at this discussion:

  There is a problem with the functionality of the site, because Google maps will no longer be supported.

  See the solution of Huxly647:

  Huxly647 , November 20, 2015 12:05 AM
  Re: iPhoto crashes after opening several times in reply to carvermon Useful

  I found a solution that works for me...

  1 goto /Applications/iPhoto.app/Contents/Resources

  2 delete the files 'googlemap.html' and googlesearch.html

  IPhoto no longer crashes, site does not work, but it doesn't bother me too much.

  Let me know if it works for you guys...

  Deletes two files "googlemap.html" and the googlesearch.html of iPhoto application bundle prevents the JavaScript running inside and causing the accident.  To access the files inside the iPhoto application select it in the Finder and ctrl-click on it. Then use the command "Show Package Contents" from the menu.  Open the content subfolder and then resources.

  Do not try this fix without making a copy of the iPhoto application before trying to delete the two files of the entire application.

  To access the files inside the iPhoto application select it in the Finder and ctrl-click on it. Then use the command "Show Package Contents" from the menu.  Open the content subfolder and then resources.