Extension drive DPS with executives and static libraries
Y at - it any initiative within the roadmap for Adobe to allow their reader DPS extension in Xcode by use of frames and static libraries?
Main features of the player could be related and distributed as a binary via static libraries.
The shared resources of the DPS reader could be packed only a framework.
Beyond the extension of the capacity of the drive, this would also enable advanced debugging and running on devices directly from Xcode.
References:
from inside xcode or delivery as a static library which allows to connect in your own application
Tags: Digital Publishing Suite
Similar Questions
-
I just had a new hard drive installed with XP, and no matter what I set the resolution to, everything now looks stretched horizontally. I don't have this problem with the old hard drive containing XP
If you did a clean installation of XP, then you must install the hardware drivers for your components. Go to the website of the manufacturer of your PC, then download and install the latest Windows XP drivers for your model.
SC Tom
-
IPSec Tunnel between Cisco 2801 and Netscren 50 with NAT and static
Hello
My problem isn't really the IPSec connection between two devices (it is already done...) But my problem is that I have a mail server on the site of Cisco, who have a static NAT from inside to outside. Due to the static NAT, I do not see the server in the VPN tunnel. I found a document that almost describes the problem:
"Configuration of a router IPSEC Tunnel private-to-private network with NAT and static" (Document ID 14144)
NAT takes place before the encryption verification!
In this document, the solution is 'routing policy' using the loopback interface. But, how can I handle this with the Netscreen firewall. Someone has an idea?
Thanks for any help
Best regards
Heiko
Hello
Try to change your static NAT with static NAT based policy.
That is to say the static NAT should not be applicable for VPN traffic
permissible static route map 1
corresponds to the IP 104
access-list 104 refuse host ip 10.1.110.10 10.1.0.0 255.255.0.0
access-list 104 allow the host ip 10.1.110.10 all
IP nat inside source static 10.1.110.10 81.222.33.90 map of static route
HTH
Kind regards
GE.
-
Can I feed 2 hard drives, one with XP and one with Win7?
I have 2 160 GB SATA HDs. C: drive is runing Win7, and I want to install the other drive with Win XP, for me to perform older simulations.
I unplugged the C: drive that has Win7 on it and went through the usual configuration with winXP, but after all installations have finished.
I am facing a blue screen that tells me I have a virus or bad drivers etc.
I ask myself where I want to install Windows XP at all times, so I guess that even if I unplugged the c drive where is installed Win7
I guess that as a 64-bit PC, it I cannot install WinXP 32-bit. Or what I have to erase Win7 first, and then install Windows XP, then Win7 after.
Please can someone help.
Thank you.
First, if you have Win 7 Pro or Ultimate, you can use the XP Mode (free from Microsoft).
If this does not work for you, what you want is called "dual-boot". There are many sites that explain how to set up (and 32 64 bit vs has nothing to do with it). Here's one (or use your favorite search engine): http://www.sevenforums.com/tutorials/8057-dual-boot-installation-windows-7-xp.html
-
two hard drives, one with vista and the other with XP and you want to remove second disk XP
I have a hard drive that came with my computer and vista on it, I added a second drive to my bench that has XP on it. I want to remove the second XP disc and simply use it as a storage drive, and I'm afraid that if I try and uninstall XP disc, it allows to uninstall vista of the first hard drive instead. or should I even try and uninstall it all and just delete all files? Since there is nothing in the registry for all the things on the second disc. If I uninstall XP second drive will be there remove all of that second drive? because there are a few things about this, I still want to keep. I should also mention that it is divided into three separate letters, if I do not uninstall XP I lose all three of these letters of partitioned drive? Any help on this would be greatly appreciated.
Thank you.
You can just uninstall XP. Anyway, as you say, you can remove the folder Program Files and Windows in that partition but personally I would just copy the files I need to another partition (on the hard drive where vista is installed) and the format of the old HDD.
-
Cascades Zygote and linking with static libraries
Using the SDK Gold version 10.0.9.2318 to build a project that uses the static libraries. Libraries have been created using the new BlackBerry Project Wizard. Applications generate and perform well in all generation except release device configurations. Application files build very well, but when the time comes to bind the build fails with:
libGeoLib.a(UTMUPS.o): relocation R_ARM_THM_MOVW_ABS_NC against `__stack_chk_guard' can not be used when making a shared object; recompile with -fPIC
I assumed that the build system attempts to link all libraries in a large library shared but fails because the object files used to build the archives are not build properly (without the option - FPIC).
Is it possible to exclude static libraries of the generation of object of shared zygote? Or y at - he shared a way to get the archives of the library built with required options so that they can be held to the object of the zygote?
I think I solved this problem.
In Momentics, right click on the static library project, select Properties. Building Goto C/C++, settings. Create device-output configuration. In the tool settings tab select QCC Compiler Options. Add the - fpic to QCC Options.
In the PRO application's project file, you may need to go back to the old way of defining library search path:
device { CONFIG(release, debug|release) { DESTDIR = o.le-v7 LIBS += -L../../GeoLib/Device-Release -L../../shape/Device-Release } CONFIG(debug, debug|release) { DESTDIR = o.le-v7-g LIBS += -L../../GeoLib/Device-Debug -L../../shape/Device-Debug } } simulator { CONFIG(release, debug|release) { DESTDIR = o LIBS += -L../../GeoLib/Simulator-Debug -L../../shape/Simulator-Debug } CONFIG(debug, debug|release) { DESTDIR = o-g LIBS += -L../../GeoLib/Simulator-Debug -L../../shape/Simulator-Debug } }
-
How the other drive app option to calculate calories? I did 45 minutes yoga with him and he showed the 260 callus which is high of 45 mins of yoga session.
ISuspect that is not correct.
Hello
Saving workouts through the app to drive using others as the type of activity, active calories are estimated at a rate equivalent to a brisk walk or based on the data recorded by the heart rate sensor, according to what is higher.
The following steps can help to improve the accuracy of the estimates made by your watch:
- Estimates for calories and other results depend, in part, your personal information. To verify that it is accurate:
- On your iPhone, in the application of the watch, go to: My Watch (tab) > health > Edit (top-right).
- While training, to optimize the performance of the heart rate sensor (data from which is used when estimating calories), make sure you wear your watch fits on top of your wrist. Apple suggests that consider you the clamping Strip before starting a workout and it loosen again thereafter.
- Note that the heart rate sensor is likely to give better results for the workouts that involve rhythmic (such as running) rather than the irregular movements.
- Calibrate your watch can improve the accuracy of various estimates related to the activity, including estimates of calorie. To calibrate your watch, follow the instructions in the link below support article. You can reset your calibration data and start the process:
- On your iPhone, in the application of the watch, go to: Watch My > privacy > Motion & Fitness > tap reset Calibration data.
More information:
Use of the workout on your Apple Watch - Apple Support
Your heart rate. What it means, and where on Apple Watch you will find. -Apple Support
Calibrate your Apple Watch for better accuracy of training and activity - Apple Support
- Estimates for calories and other results depend, in part, your personal information. To verify that it is accurate:
-
I have all of my music stored on an external hard drive. On my old iMac, I have iTunes with all the songs on this hard drive organized or recognized as I like, with comments and play lists and track/song names and album names. How can I transfer iTunes as it is to the old iMac to the new MacMini while leaving the actual files of the song (> 2.5 to) on the external hard drive? In short, I want the old iTunes on my new computer, but the files of the song in the current HD thank you so much.
(2.66 GHz, 4 GB RAM 20 "iMac; 2014 new Mac Mini)
Hmmm... Never tried, but I "think" it should work. The reader will need to named exactly something on the new computer, as it was on the old.
1. on the old computer, go to {user folder} / music/iTunes and move the files on the external hard drive.
2. on the new computer in iTunes, go to Preferences > advanced and not select "copy of the file to the iTunes Media folder.
3. always in this same window under "iTunes Media folder location", click on change. Now select the location on the external hard drive, you have moved the files too.
Files to be copied.
iTunes Music Library.xml
iTunes Library.itl
iTunes Library Extras.itdb
iTunes Library Genius.itdb
-
I'm working with Gmail and I see that my browser too old! I have also the same without any extension. Please help me. Thank you
You have a user agent which is corrupt and which identifies you as: undefined GoogleToolbarBB
See:
-
Cannot add bookmarks with WB and/or all extensions disabled
Using FF 3.6.8. Updated for FF2 a few months when I found extension 'Old manage bookmarks' which allows me to see all the bookmarks and folders to different levels of tree in a single window. But since the upgrade, I can't add a bookmark for a Web page by any other means that create new bookmark URL, copy and paste. Certainly none with a click. Have turned off my two extensions of bm (one above and adds BM here) and then all extensions, to see if the problem goes away. It remains. On Windows XP SP3.
Try a new profile.
http://KB.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows -
Composition of the phone numbers with pauses and extensions?
With the Pre, is it possible to insert pauses and extensions in phone numbers in your contacts list? And have the phone to dial them all at once when you compose? What to do to have these numbers in your calendar for an event such as a conference call? I would like to simply touch the number to the event and do all numbers with pauses and extensions to put me in the call.
To insert a two-second pause in the dialing sequence, enter a T where you want than the break to appear. To include a stop in the numbering sequence, enter a P where you want to stop to appear. to call the next set of numbers after the stop, press the screen.
-
Problems with QE65000 and optical driver Océna spectrometer
Hi, a few months ago, I installed the driver to use the spectrometers of USB4000, HR4000 and QE65000 with LabVIEW 2010 with Windows 7 - x 64. Recently, I measured the spectrum of the Source of Calibration HG - 1 Mercury Argon with the help of software SpectraSuite and a LabVIEW program QE65000 spectrometer ("optical ocean 2000 4000 acquire continuous Waveform.vi, example of library, Fig1"). When I got the two spectra, I observed that there is a shift to the infrared region of the spectrum with LabVIEW program. Acquired calibration coefficients are consistent with "wavelength calibration data" that comes with the spectrometer (Fig2). So, I would like to know if there are problems with the example of the library program or what is the problem?. Attached to this message I send image of obtained spectra.
The black figure is the spectrum obtained with the example LabVIEW program, including the ocean optical library. The red graph is the spectrum obtained with SpectraSuite and coinciding with the real spectrum of the HG-1 lamp.
Best regards, Diego
Version 1.3.2 should be alive in a few hours and this latest version is implementing the changes suggested above. Did someone mind try these out and let us know how it goes?
2000 4000 optical ocean pilot Page
-
problems with webcam and driver...?
my laptop is dell core i3 model vostro 1540, there the camera problem, the result of the camera is black and white... I can't really know how to fix this problem... .and I found there's a driver named lexmark x 422 is not proceed with the installation correctly how fix me both issues? decline me as soon as possible...
Hello
Start a separate thread on the Lexmark driver that is your printer. Don't forget to register your
Version of Windows and other information that we need us help to help you. Use the forum
for your version of Windows.How to ask a question
http://support.Microsoft.com/kb/555375Microsoft Community - Forums
http://answers.Microsoft.com/en-us===============================================================
Don't forget to check with support from the manufacturer of your system, drivers, and documentation online and ask
their forums (if any) where there would be others with the same model if a WebCam integrated or the
Real WebCam manufacturer if a separate device. Links to the Dell Support below.Troubleshoot camera connection
http://Windows.Microsoft.com/en-us/Windows7/Troubleshoot-camera-connection-problemsYou probably need to recharge the device drivers and camera control software (usually included
with the drivers and installed at the same time).Login as an administrator.
Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
will update the driver stack.Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
software (if not more recent get the same).Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.
Manually look at the sites of the manufacturer for drivers.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmInstallation and update of drivers to 7 (update drivers manually using the methods above is preferred
to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.htmlThen let windows updates on however prevent loading of drivers who are often older than the
those that you have installed. If updates suggests a pilot and then HIDE it and watch manually to see if their
really is a more recent version (at the time system manufacturer and the sites of the manufacturer of the device).Stop Windows 7 to automatically install device drivers
http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/How to disable automatic driver Installation in Windows 7 / Vista
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
Ultimate and Enterprise)
http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/----------------------------------------------------------------------------
Check with Dell Support, online documentation and drivers (update or reinstall), and
their forums.Dell support
http://support.Dell.com/Dell support drivers - product manual & warranty Info (left side) - and much more
http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHSDell forums
http://en.community.Dell.com/forums/I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Suggested Drive setup for new h8 - 1360t with SSD and Raid-1 array
All,
I need some advice on how to configure the drives in my new system (waiting for construction and delivery, sigh).
I bought a plan to replace the 1 TB drive with a new drive SSD that I start from and H8 - 1360T (Win 7 Pro).
I also have a Raid-1 array in an old HP 4999 T system (Vista) disks Western Digital Caviar Black 2x2TB
By looking at the motherboard plug appear to be only SATA0/1 6 GB/s, the others are 3GBPS.
http://support.HP.com/us-en/document/c03132942
I was a little surprised by that and need some advice.
1. If I put the SSD on SATA0 or SATA1, the quickest way?
2 or do I put the drives Raid-1 array and move the SSD to path of 3 Gbps?
I think this last (option 2), but wanted to get your entry in case missed me something.
Thank you
Joel
Ruette,
Thanks for your comments. Looks like I should start with Option 1 as a better starting point.
Joel
-
I have two portable hard drives with music and video files and cannot get them to play
I have two portable hard drives with music and movies files can get them to play my laptop girlfriend see them, but does not play
If you copy the files on the portable hard drive will they play?
Maybe you are looking for
-
Satellite L650 - 10: PSK1JE - no external signal on TV with HDMI
I connected my PSK1JE Toshiba L650 - 10 H with TV KDL-26BX320 using an HDMI cable. Win + P dial-up (Fn + F5) to enlarge the screen. TV has no signal (black screen) but the computer recognizes TV. All the drivers are up to date. Screenshot of settings
-
Switch from Vista 32 bit to 64 bit on laptop
Hello I have a 32-bit version of Vista Home Premium came with my laptop. I would switch to a 64-bit. I am aware that I have to do a clean install - not an upgrade. However, since I already have a legitimate and activated Vista Home Premium version, I
-
Simulator SDK BlackBerry Messenger problems
Try to get the operational BBM simulators SDK. SDM seems to run ok but when I run sim1.bat or sim2.bat I get an error 507 on the Simulator and it closes. I went through the instructions many times but couldn't find where I went wrong, any suggestions
-
I had to reset my access point AP1242AG with the mode button. Now, I am trying to assign an IP address in the CLI. In the configuration guide, he says "when you see these line in the CLI press ESC ####################' When I start the AP I clearly s
-
Error importing 2015.6 Lightroom CC
Since the last update to Lightroom, I was unable to import ANY of my memory cards.I always get the following error message: "the following files were not imported because they could not be read. (251).There any memory card I use, they all produce the