Extensions Exchange and Kuler, unable to connect costs to install CC products

Similar Questions

• Reinstalled XP and now unable to connect to the internet, dsl provider says the leaves to reinstall the connection LAN how fix this?

  Original title: windows xp.

  reinstalled xp and now unable to connect to the internet, dsl provider says the leaves to reinstall the connection LAN how fix this?

  Hello

  Go to the website of your computer manufacturer > drivers download Section > put your computer model number > operating system > Search adapter network, pilots etc. for her.

  Get graphics, sound while you're there.

  You should always do a reinstallation.

  Use the computer that you use to make the foregoing > download and save in this office > copy of Flash Drive > then install in another computer.

  See you soon.

• That seems like an ad on my pages of AOL and XFINITY: unable to connect... "How to get rid of the ad.

  The full announcement is this "unable to connect".

  Firefox can't establish a connection to the server famousadage.com.

     The site could be temporarily unavailable or too busy. Try again in a few moments.
     If you are unable to load any pages, check your computer's network connection.
     If your computer or network is protected by a firewall or proxy, make sure that Firefox is....
  

  In any case, it takes you to go.daddy where the site is parked.
  How can this ad got rid of because when I saw the ad I lost some time because I thought it was a notice about my Firefox browser.
  OK how do we get rid of this announcement?

  Adblock more {web link}
  Blocks annoying video ads on YouTube, Facebook ads, banners
  and much more. Adblock Plus blocks all the annoying ads, and
  supports Web sites by blocking is not discrete (configurable) default ads.

  Pop-up Addon Adblock more {web link}
  Adblock Plus pop-up Addon - extends the functionality of blocking of the
  Adblock Plus for those annoying windows pop up that opens on the mouse
  clicks and other actions of the user.

  Forum; Homepage of Adblock Plus {web link}

• A ' test mode windows 7 build 7600 "ran Mr. difficulty to remove and now unable to connect to the Internet".

  Everything worked fine until "watermark of Mr. fix - it deleted now unable to connect to I Internet.» Took the floor to Internet provider tech and HP tech

  Hi Donnie,

  To help you to propose measures to solve the problem, I would appreciate if you could answer the following questions:

  1. what fixit did you run?

  2. you receive an error message or error code?

  I suggest you run the network troubleshooter and check if it helps.

  Using the troubleshooter from network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

   

  You can also see the following article for more information on troubleshooting internet connection problems:

   

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-i-connect-to-the-Internet

   

  Hope this information helps. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• View is not to connect to the event db and error unable to connect to the db

  Hello

  while trying to connect the event dB view, I encounter a weird problem where, by getting "unable to connect" error message.

  in the error log I get below error also can you pls help.

  TP-Processor1 > code [ConfigurationManagerBean] ADAM Error: 2 128 com.vmware.vdi.admin.ui.ConfigurationManagerBean.updateDatabaseConfiguration(SourceFile:181)

  com.vmware.vdi.adamwrapper.exceptions.ADAMServerException: database initialization failed, SQL exception when connecting to the database: TCP/IP connection to host failed. java.net.ConnectException: connection refused: connect

  at com.vmware.vdi.admin.be.ConfigurationManager.a(SourceFile:1703)

  at com.vmware.vdi.admin.be.ConfigurationManager.updateDatabaseConfiguration(SourceFile:1580)

  at com.vmware.vdi.admin.ui.ConfigurationManagerBean.updateDatabaseConfiguration(SourceFile:177)

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)

  at java.lang.reflect.Method.invoke(Method.java:606)

  to com.vmware.vdi.admin.ui.common.ViewFlexFactory$ ViewProxy.invoke (SourceFile:113)

  to com.sun.proxy. $Proxy56.updateDatabaseConfiguration (unknown Source)

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)

  at java.lang.reflect.Method.invoke(Method.java:606)

  at flex.messaging.services.remoting.adapters.JavaAdapter.invoke(JavaAdapter.java:418)

  at flex.messaging.services.RemotingService.serviceMessage(RemotingService.java:183)

  at flex.messaging.MessageBroker.routeMessageToService(MessageBroker.java:1400)

  at flex.messaging.endpoints.AbstractEndpoint.serviceMessage(AbstractEndpoint.java:1011)

  at flex.messaging.endpoints.amf.MessageBrokerFilter.invoke(MessageBrokerFilter.java:103)

  at flex.messaging.endpoints.amf.LegacyFilter.invoke(LegacyFilter.java:158)

  at flex.messaging.endpoints.amf.SessionFilter.invoke(SessionFilter.java:44)

  at flex.messaging.endpoints.amf.BatchProcessFilter.invoke(BatchProcessFilter.java:67)

  at flex.messaging.endpoints.amf.SerializationFilter.invoke(SerializationFilter.java:166)

  at flex.messaging.endpoints.BaseHTTPEndpoint.service(BaseHTTPEndpoint.java:291)

  at flex.messaging.MessageBrokerServlet.service(MessageBrokerServlet.java:353)

  at javax.servlet.http.HttpServlet.service(HttpServlet.java:723)

  at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)

  at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)

  at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:646)

  at org.apache.catalina.core.ApplicationDispatcher.processRequest(ApplicationDispatcher.java:436)

  at org.apache.catalina.core.ApplicationDispatcher.doForward(ApplicationDispatcher.java:374)

  at org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:302)

  at com.vmware.vdi.admin.ui.servlet.AMFProxyServlet.a(SourceFile:90)

  at com.vmware.vdi.admin.ui.servlet.AMFProxyServlet.doPost(SourceFile:57)

  Hi James,

  It's a SQL API based in the event database connection, it does not need an ODBC connection, see will do for you.

  I just wanted to know what operating system you are using to connect to the server and did you do Windows Update on this machine? If not done it please do.

  restart the machine try connecting the event database. It does not work please check the things mentioned in the KB below

  http://KB.VMware.com/kb/1029537

  You can do one more thing before checking the KB, if the connection to the server OS is windows 2012 and the SQL Windows 2012, take a snapshot of the VM Server conection and proceed to

  under location

  C:\Program Files\VMware\VMware View\Server\broker\shared\lib\sqljdbc-1.2.jar

  Stop all the service view in the connection to the server.

  sqljdbc - 1.2.jar and rename sqljdbc - 1.2.jar.backup.

  Download SQL JDBC 3.0 driver http://www.microsoft.com/en-us/download/details.aspx?id=21599

  extract the downloaded file and copy the sqljdbc4.jar to location (C:\Program Files\VMware\VMware View\Server\broker\shared\lib\)

  also copy same file once more and rename the file to sqljdbc-1.2.jar

  Restart all services server connection and wait 10 minutes, then check the admin page.

• NETGEAR DR834G v3 router unable to connect to newly installed Windows7 Pro

  Original title: Netgear DR834G v3 connection newly installed Windows7 Pro on my pc

  I installed Windows7Pro on my pc (after removing the XP) but can't connect my Netgear DG834G v3 router: the ethernet led does not light and there is no connection to the pc to the router.   I am using the Netgear installation disc, but can only get to this point.    The router works fine with my laptop, using both the ethernet cable and wireless.  Somebody said that I have to install a driver?   How and where can I get this from?  What should I do to connect?

  Hi Antje,

  For a better understanding of the question, I would like to know what is the serial number and model of the computer?

  This problem could occur due to these reasons.

  1 if the router is not properly Setup.

  2. If the software\driver is not installed or damaged.

  Try the steps listed here and see if it helps.

  Method 1:
  I suggest you to return the item and check if it helps.

  Router and Networking FAQ

  Method 2:
  If the problem persists, I suggest you to download software\driver for the router on the manufacturer's Web site and check if it helps.

  http://Downloadcenter.NETGEAR.com/en/product/DG834Gv3

  See the article for more information.

  Wireless and wired network problems

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• hp officejet 6700 premium: officejet 6700 power switch on, menu and wireless unable to connect offline

  my HP Officejet 6700 Premium

  (1) display suddenly 'offline' from my computer.

  (2) the indicator light is on, but no menu or wireless lamps are on... I can't turn on or off using the switch, there's just lit up

  ... I unplugged the power from each end and the led turns on as soon as it is plugged

  ... I have re-plugged directly into wall outlet

  ... I've tried everything on the site within my computer and HP

  ... uninstalled, then rebooted everything and re-installed

  None of the software may "detect" the printer

  My initial suspicion continues even after all that... that my printer is dead somewhere inside, and it has nothing to do with the connection to my routers, computers, etc. ???

  However, my first notes that something was wrong was when I went to print and my computer says the printer is "offline"... Of course, I checked that setting now and he was not in offline mode in the settings.

  Does anyone have a solution or the same suspicion.

  I wrote HP and have failed for 4 days.

  Thank you

  Unplug the unit and let it sit for an hour.  Plug it into the wall directly, do not use any type of power strip.

• Laptop has virus and still unable to connect to the Web site after his withdrawal.

  Original title: laptop cannot connect to router

  my daughter portable computer had bankerfoxa virus I think that I got rid of but she still can't connect on the website I want to download microsoft security essential on his cell phone how if I can not connect? pls help

  Hi trinidadg,.

  Also try the following steps, you have a problem connecting to the Web sites.

  Try to do a System Restore to an earlier date when your computer was working well and try to run a scan for malware removal.

  Try to reset the Proxy settings to connect to the internet, as some malware enable proxy settings that block your ability to browse Internet sites.

  To reset the Proxy settings:

  Click Start-> in "search programs and files" type CMD-> in the programs in the list right click CMD and click 'run as administrator '.

  In the command prompt, type the following and press ENTER:

  NETSH WINHTTP RESET PROXY

  Restart the computer

  Touhami

• I changed administration of name and password, unable to connect at the back with new password.

  I changed my given name and password, how can I fix the problem?  I can no longer connect new password to my new account administration.

  http://support.Microsoft.com/default.aspx/KB/940765/en-us

  How to use system restore to log on Windows 7 or Windows Vista when you lose access to an account.

  As you know your old password, read the above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/189126

  "Microsoft's strategy concerning lost or forgotten passwords"

  Microsoft cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd

  Read theBANNING of cracking of passwords information tools information provided in these forums in the thread above posted byBill fill MSFT, moderator

  See you soon.

  Mick Murphy - Microsoft partner

• B1160W wireless wasn't working and now unable to connect - I tried the re-execution, WPS pairing Setup and not work now

  This work on my PC then tried to add wireless to PC from my wife and now it does not work on either.     Wireless Setup I tried tried uninstall/reinstall using the installer from the installation CD, 2) and 3) have also tried pairing WPS.    Printer sees the network but seems to forget the network password.    I'm sure that the password is correct and then reconnected iphone, PC, etc. just to be 100% sure.    I can print the network config and also use the printer via a USB cable, but no wire is very frustrating.    I installed the latest firmware and my PC is Windows 7.     I am 30 years old PC experience and have built machines and made all kinds of software installations.     Is there a reset machine that can be done?    Otherwise, I am convinced that it is a kind of corruption in wireless function.    My warranty through 02/23/15

  I finally got working again. I connected the USB cable from the printer to the computer. I went to my directory of installed programs and selected Dell and there is an application called 'maintenance', which allowed me to "repair/reinstall" the driver who was initially working OK (then stopped working). Then in the Dell same folder was an application called "Wireless Setup program.

  I followed the directions, with cable is still connected and manually entered my "wifi password', in the dialog box. I got the message "installation failed, try again? I chose 'Yes', this time I got the message "success of wireless configuration".

  Then I unplugged the USB cable from the printer, and now it works wireless again. He did change the "name" of the printer from "DELL * ' followed by a group of numbers. The new name of the printer has changed to "1160w Dell monochrome laser printer", which is the best description of the printer anyway, so I don't mind the change.

  The original name of the printer was 'assigned' initial installation when I used the 'wifi' on the printer and the router button. But as these buttons no longer worked to solve the problem, the manual installation using the cable has solved my problem.

  I did not bother to try to download the latest drivers from their web site, to see if that was the problem, because when I tried to use the driver that I already "knew" worked with my current setup of troubleshooting. I can update my driver someday, when I am willing that my printer stops working again. But, for now "if it's not broken, do not fix."   :-)

• I got to windows 7 Windows 10 and now unable to connect to the internet

  I connect to my router, but the warning of yellow color that I don't have an internet connection

  When I try to run network diagnostics, the message appears "there could be a problem with the driver for the connection to the Local network card", but when I click on ' try these repairs...» ', nothing happens.

  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  Remove the driver current completely and install the latest driver available.  For instructions on how to do read everything to update the drivers of my partner JMH3143 http://answers.microsoft.com/en-us/windows/wiki/windows_other-hardware/updating-a-driver/a5e6345e-af9b-4099-bef0-8d22254aa1c1?tm=1436753520149 here

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

• ThinApped application requiring a mounted network drive and get "Unable to connect to the sharedDbLibrary" when the application is running on W7 and the drive is mounted

  We have an application that needs to have a specific network drive, mounted with a the letter I:\. This support allows the application to access some of the files that must be available for the application to run.

  If the I: drive is not mounted then the application will not work and you get the following message if displays the runtime "Impossible to connect to the sharedDbLibrary.".

  We have the application on an XPSP3 box thinapped and everything works fine as long as the drive is mounted.

  The ultimate goal is to have the application thinapp running on a workstation of W7.

  We have mounted drive I:\ on a post of W7 and ran the thinapp app by making the same error message that allows us to obtain under XP as drive I:\ was not mounted "impossible to connect to the sharedDbLibrary".

  We checked that the drive I:\ is accessible and we also validated that the path is good. We were able to reproduce the problem in a Windows 2008 box, as well on the other hand the thinapp works fine on a Windows 2003 operating system.

  So basically with the drive I:\ mounted on XP and Windows 2003 the app big short thinapp. With the same drive I:\ mounted on W7 and W2008 application does not run and we get the same message that allows us to get on WXP and W2k3 when drive I:\ was not mounted and the app couldn't find the mapped drive.

  Anyone know how to start to solve this problem?

  Have you had a look at this blog post? http://blogs.VMware.com/ThinApp/2011/04/making-Windows-XP-only-apps-run-on-Windows-7.html

  It might help you to add necessary dll and get the app runs on Win7.

• HP Mini 5102: HP Mini 5102 reset to factory default and now unable to connect to WIFI

  I have a HP mini 5102 NetBook that I restore to factory settings. However after doing what they do not connect to WIFI. I tried to install the drivers the disc that came with the device, but not luck. Suggestions?

  Hello:

  This is the driver you need for the 0004:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=4094023&swItemId=ob_81492_2&swEnvOid=4053

• JDeveloper and Subversion - unable to connect to the repository

  Using JDeveloper 11.1.1.6.

  I have a Subversion repository installed on a server that I can connect from my local computer using the appropriate URL.

  When I try to set up the repository connection in JDev, I get a "Connection Refused" error.

  I use the http protocol.

  It works by using a URL directly from a browser, why JDeveloper if not connect using this URL?

  Thank you
  Ray

  What a parameter problem in JDeveloper of proxy preferences?

  You can use the ip address of the server instead of the name of JDeveloper?

• Satellite Pro A10 - WXP re-installed and unable to connect to the internet

  Please help me... I have re-installed Windows XP Home... and now unable to connect to the internet... have also not more of her!
  I went into the Device Manager... in 'other devices' - and it is yellow? mark beside...
  1 / ethernet controller. 2 / multimedia audio controller 3 / PCI modem controller 4 / video...
  They all say "drivers for it are not installed. .... Also, went to "system devices" and find 9 other things that no longer have the drivers installed... said there is also no "audio device" installed!

  My laptop is completely exhausted, or it is better to try to resolve this issue. I'm a fool when it comes to stuff like that... so be gentle with me... what I need to find all the individual drivers and re - install...? BTW... There is no wireless card in the back... (Already checked)...

  Would appreciate any help...
  Thank you

  Hello

  Satellite A10 is a little older model laptop and you can find the drivers in * archives *. go to the [page driver Toshiba | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp]

  Archive-online Satellite Pro-online Satellite Pro A series-online Satellite Pro A10

  > / ethernet controller. 2 / multimedia audio controller 3 / PCI modem controller 4 / video

  Download and install: 1) Lan Card 4) graph of the card sound 2) 3) Modem driver download also, other drivers if necessary.