external MIC does not

Similar Questions

• Satellite L50-B916 - recording external Microphone does not work

  Hello

  Connect an external microphone to * Headphone\Microphone combo socket *, still records through portable microphone instead of externally. Registration of external Microphone does not work.

  What Miss me? Please notify.

  Model: L50-B916
  Screenshot: http://s12.postimg.org/j8h3v5k4d/laptop.jpg

  I can't say with certainty what may be wrong here, but two things confuse me:
  -somehow your external MIC is obviously not detected because in the case when the external microphone is connected laptop switches automatically to it
  -I don't understand why there are two identical entries under recording devices.

  When I connect my headphone it is always a single entry (Conexant SmartAudio HD default unit), but my machine automatically goes to the external microphone only.

  Have you tested the feature with some applications like Skype?

• EliteBook 1020: External keyboard does not work in the form of Bitlocker

  We had a few HP 1020 and 1040: models recently, and all have the same question. When the laptop is connected, the external keyboard does not work in the form of Bitlocker. It works in the BIOS and in Windows itself, but not in Bitlocker. This means that we must open the laptop screen to enter the Bitlocker pin, then let it open and GPO that dictates the computer into hibernation when the lid is closed. We have twisted the GPO, but in vain. Anyone else seen elsewhere or a solution?

  If the bios is up to date, I would look at the BIOS settings. I think that Fast Boot is enabled in your case, this may cause usb devices not to see in the stadium that BitLocker requires

• My Acer Iconia W/700 external keyboard does not work. My bluetooth seems ok.

  My external keyboard does not work. I can't type on the screen and my bluetooth seems ok.

  Here is the link with the steps to connect your Bluetooth keyboard

  http://Acer.custhelp.com/app/answers/detail/A_ID/27798/kW/W700

• My Pavilion dv6 upgraded to windows 10 what happened to my external screen does not

  My Pavilion dv6 upgraded to windows 10 what happened to my external screen does not

  Hi @Jake08,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion dv6 Notebook and questions with external screen works not properly. You can try this without the connected external monitor.

  In Device Manager, click the arrow next to display adapters to expand this category
  Right-click on the graph, and then select Update driver software if more than 1 graphic adapter do 1 at a time.
  Select search automatically for updated driver software.

  The laptop must find and automatically install the updated driver
  Once the installation is complete, restart your laptop.

  You can try to use the Windows Update Troubleshooter to fix updates that do not come through Windows 10.  Please restart the laptop twice to make sure that all updates are completed!

  Please let me know how it goes.

  Thank you.

• External microphone does not work with my Satellite A200-196

  I have the Satellite A200-196 and have connected an external microphone on the front mic port, the laptop recognizes as being there and working, but I can't work. I tried to configure through speech recognition, but it does not.

  I tried to configure it through live messenger, but there is no sound there. I use windows Vista and am totally stuck what to do, please help, I would be very grateful.

  Thank you

  Hell's

  Hello

  Please open the control panel and sound properties there. Click the recording tab and that there should be shown Microphone as it is activated. There, click with the right button of the mouse and choose the option configure speech recognition.

  You will find the Set up microphone option. Start Microphone Setup Wizzard and check the functionality of the mic it.

• Satellite L555 - 10 M - internal MIC does not work?

  Satellite L555 - 10 M

  Hello

  It seems that the internal MIC (beside the web camera) does not work, because I can not save anything.
  I tried the windows audiorecorder application, Skype application, and one any of them can record my voice.

  The external microphone works fine, so I think the software using windows setup and the definition realtek HD audiomanager are OK.

  How can I check if it is really a hardware problem?

  Coul you please help me?
  Thank you!

  > I tried the windows audiorecorder application, Skype application, and one any of them can record my voice.

  Have you tested the internal mic in relation to the installed webcam software?
  Means do because the internal microphone belongs to the internal webcam.
  In addition, you should check the settings in the control panel-> sound-> recording tab
  The internal microphone should be selected as the default device.
  If the internal MIC is not listed it right click and check the options: Show hidden and disabled devices.

• External microphone does not work - HP G62 Windows 7

  Hi all

  My microphone works fine. Also, if I plug in a headset, his mic works fine as well.

  However, I tried to use an external microphone like this:

  

  but it does not work on my laptop HP G62, although it works perfectly on a PC.

  I'm running on Windows 7 Ultimate.
  Any tips?
  Thank you

  heheheh... Sorry, I was wrong! I've changed the mic to stop rather than switch!
  The word 'on' should appear when you switch, not disappear.

• Mavericks on external partition does not start

  Hello

  I'm trying to implement the Mavericks on a partition on my external hard drive. Found several good guides on how but can't seem to boot from it.

  I created a Mavericks install USB and started one. I deleted the partition (guid partition map and extended journaled) where I wanted to install the Mavericks ran through the facility and said it will re-start automatically that it did.

  However it is started on my internal drive with OS X 10.11.4.

  The partition where the Mavericks has been installed is displayed in the Finder.

  The partition where the Mavericks has been installed is displayed as a virtual disk in system preferences, but when Source selected to restart, but after rebooting, it does not appear.

  When I hold the ket Option initially upwards, it does not seem to me to choose.

  I retried with 'createinstallmedia' https://support.apple.com/en-us/HT201372 and Diskmaker, but the same results.

  How can I solve why it why it seems installed, but is not a bootable disk?

  Thanks for any advice.

  Also...

  I use a partition of 100 GB of the Mavericks on a backup drive Seagate to Office for Mac 4.

• Z830 - pad digital satellite on the external keyboard does not work

  Hello

  I tried to get an external keyboard (USB) to work with my Z830 running Win 7 (64-bit). I've tried three different keyboards to USB in ports and also a wireless keyboard.

  The keyboard works fine, but I can't the numeric keypad right of the keyboard to work.
  It allows me to move the screen IE when the NUMLOCK is turned off but when the NUMLOCK is turned on, it does nothing.

  I looked in the bios and changed the parameters relating to the features of legact and also the numlock option, but to no avail. The numeric keypad on the keyboard worked on other machines.

  Any suggestions greatly appreciated.

  Thank you

  Ash

  Hello

  I'm not quite sure that all this, but my hypothesis is code KBC m is missing in the BIOS.
  Satellite/Portege Z830 keyboard does not support keypad so maybe that's the reason why the numeric keypad on the keyboard can not be activated.

• My drive hard disk external DRIVE does not work!

  I have a problem with an external hard drive mij on my pc, it's a px1267e - 1 g 32.

  I have bould last year and it worked well on my old pc with XP
  Now, I have a new computer with Vista on it and I want to connect to my external hard drive, but it gives no reaction on my pc.
  The password screen does not appear, I tried different think and Regen, I installed but I can't make it work

  Somebudy here have the same problem or know how I can do it I love it!

  Welcome them
  Jan

  PS. Sorry for my English

  Hello

  I have the same problem. But I've found a workaround.
  -Connect your HDD to PC VISTA
  -Select the CD drive with your browser (password)
  -Run ONSPCLCK.exe
  -Select 'Options '.
  -Select "Disable security password"
  -Enter your current password
  -Unplug the HARD drive
  -Connect the HARD drive

  now, it will work, but without any protection of password :(

  CU

  Post edited by: Master_of_Disaster

• Drive external DRIVE does not appear in my computer

  Windows says new hardware detected... your new hardware is installed, but it does not appear in my computer. No drive letter is assigned.

  Can anyone help?

  Do you use an external USB HDD? Does a job on another computer?

• Satellite C850 - internal MIC does not work properly

  my knees thoshiba (C850 - B237) internal microphone does not work properly. I checked my record with webcam... but can hear the noise only... in the settings of the sound card, everything is ok... I also did the uninstall device driver and restarted... But the problem is still... Help, please

  You must mark the internal mic as the default device.
  This can be done in its tab → click right on internal mic to record and choose the default device

• External storage does not work after firmware update

  I've updated my ix2-200 for the latest firmware. After that, my NAS does not detect the external hard drive when I connect to it. I need to plug in the HDD and restart the NAS, this way to detect the SIN, but is not a good solution, because maybe someone is its access to the NAS.

  With the old firmware, I connected and disconnected the external drive without any problems.

  Is there a solution? If there is none, is it possible to Flash an older firmware?

  You can check your status here:

  https://Lenovo-na-en.custhelp.com/app/answers/detail/A_ID/14431

• folder on the external drive does not open in a new window

  on iMac OS 10.10.5, when I open a folder (by double-clicking) on an external drive, the folder does not open in a new window, but in a window that replaces the window that was opened.  I looked for a system setting that controls this (in system PREF), but I couldn't find anything useful.

  If you control - click the folder there is an option to open in a new tab. I don't know of anyway to set up in system preferences.