External monitor is recognized not it says "no signal".

Similar Questions

• External monitor (projector HDMI) not recognized in CC AE or AE CS6 with the new Macbook Pro

  You have a very difficult problem that maybe someone can help me find a solution.  I had an old Macbook Pro (2009-ish) I was using with AE and my HDMI projector to do the work of projection mapping.  The laptop computer motherboard used recently (not linked, I don't think) but now I bought a new Macbook Pro and am trying to use the HDMI output to the projector as my external monitor in After Effects (I tried both CC and CS5.5 and CS6). Under Preview video it does not appear as an option to send to (the choices are computer monitor only or Firewire).

  I'm a mess that I'm supposed to do a show tonight with the installation I did many times with my old Macbook and AE and now can't do it at all. I have to be able to have the projector receive EI feed - and nothing I've done so far has helped. The system sees the projector, then why doesn't AE?  I can't drag the window of the program in the projector window space and expand - there must be exactly 1920 x 1080 in order for me align correctly.

  If there is Adobe TAPI people this morning, I'd CERTAINLY appreciate your comments, as well as any other person who might have had similar problems. It should work, it should be a no-brainer. Right now I'm running a new STANDARD Apple Macbook Pro with HDMI output and the latest version of AE CC with all updates done. Please, please help!

  Thanks in advance,

  Bill

  After Effects does not come with components for an HDMI output.

  Your other computer must have installed additional components that adds this functionality.

  See this thread for more information:

  http://forums.Adobe.com/thread/1006705

• EliteBook 8460p and external monitor/projector does not work

  We have several 8460 with the same question.

  They work fine until you try to connect to an external monitor/TV/projector and then the trouble begins.

  When you use Fn + F4 to establish a dual monitor output the external monitor and integrated display switches between the two, as if the PC cannot determine the display to use. On rare occasions, it works but it is not reliable. I ve it first met on a fair and when I tried it before the session, it worked fine. During the session it just started this behavior. I took it out and replaced the graphics drivers, BIOS and made sure that the resolution was not the issue. It worked fine and I returned it to the room of the lesson and he did it again.

  I started to believe that the projector was the wrong part here, so I didn't want to use the PC again on this fair, but no other computer shows no signs of distress.

  Since then, it was at the beginning of this spring, I ve seen and experienced the same problem with several computers of the same type and with different monitor and they all behave in the same way.

  I have spent some time now and searched the web but found nothing I ve doesn't explain anything around it and so far no update driver, and no other updates (including a full installation) has solved this problem.

  There are the HP Elitebook 8460p with AMD graphics card in the computer.

  There is no any other indication that something isn't going to the newspaper or whatever it is.

  Any suggestion of what may be the cause of this is useful.

  Hello and thanks for the reply.

  The original problem is old, from 2012, in fact and more or less no longer applies. Some of the more troublesome computers has been replaced with other models at the time and the 8460 p is used more or less entirely users who do not have the need for external screens.

  Have not seen it since a long time but we've updated the BIOS and drivers a couple of times so the current status is in fact "stable".

  Thus, we can say that the problem is not more, but whatever solved the problem is unknown.

• external monitor display resolution not as an option

  I try to have an external monitor for MacBook Pro (the Captain). While setting up, I couldn't find the proper resolution (1920 * 1080 @60 Hz) in the display settings. I did a nd restart read a lot about this, but I couldn't find a simple solution on how to add a resolution in the option if it is not found.

  hope you can help me configure the resolution to the required resolution.

  After a screen shows what display preferences for the external monitor

• External monitor adapter does not

  Hello

  I recently encountered a problem with my external monitor adapter. It worked very well until all monitors I put seeing flashes and the screen goes black. I tried to make all combinations of display configuration but the screen is still blank. When I plug the cable into the adapter, the monitor can receive a signal on my external VGA adapter, but cannot display anything (means when my external monitoris not connect it to any vga, it displays "Cable not connected", but when I attach my external adapter, the message disappears). Any suggestion to this problem? Is there a technician of Lenovo in this forum who can help me because I tried calling support, but I'm a stranger. I need to know if it can be fixed by formatting of Vista. Either way, my machine is a Lenovo Y410.

  Thank you

  Terrence

  Check the cable or re-install the graphics card drivers.

  If you think that it is hardware problem and goes to the format, try to restore windows.

• Tecra M5 - external monitor detected but not image

  Hello

  I just bought Tecra M5 for use with my external NEC monitor. However, regardless of the configuration, I try I get no image on the monitor. The LED on the monitor indicates that it receives the signal from the laptop but the monitor remains black pitch. The monitor works obviously very well, I just disconnected from another laptop.

  I tried all possible settings in the nVidia control panel, but without success. I also changed "Power On Display" in the BIOS "Screen LCD + Analog RGB" but no luck either.

  I have v.3.70 of BIOS and graphics card drivers v.7.15.

  Can anyone help?

  Thank you
  Mike

  PS When I press Fn + F5, I have no options to choose from, unlike the other FN +... combinations. I don't know that it should be everything, but it is perhaps worth mentioning.

  Also when I select only 'use a view' of the nVidia control panel and select my NEC monitor in the list, the monitor turns on and the light turns green, but the screen is still black. Like I can't accept changes the output switches to the computer screen after a few seconds.

  Hello

  I think you should test with the preinstalled Toshiba operating system.
  After that the laptop was recovered, connect the external monitor and use the FN + F5 in order to detect the external display.

• External monitor works does not after upgrade

  Hello friends.

  Computer and software (Production Premium CS5.5) have improved. I use an external bridge connected via Firewire. Premiere Pro sees the bridge but does not the image/video to it. I even managed to capture from the first bridge without problem. No matter what I tried first will not export to the NTSC monitor. He did it in Production Studio Premium. With the software, I had before she would export any SD NTSC image or video. I produce a weekly television show and my external NTSC monitor is a must for the color calibration. Any help would be greatly appreciated.

  CS5.5 Production Premium

  Two DVI monitors

  Quadro 2000 video card

  Windows 7 Professional - 64-bit

  I7 with 16 gigs ram

  

• Satellite U300 - 13 M - port external monitor (VGA port) does not work

  Dear users of Forums from Toshiba,

  I have a problem with the VGA port. I use the Windows XP operating system. Laptop, do not display on an external monitor, I tried all monitors to connect to my office, but does not solve this problem. I also tried to reinstall Windows XP, once again, and nothing has changed.

  Please help me.

  Best regards, Elbrus

  Hello

  I guess that by Satellite U300 came preinstalled with Vista. Am I right about that?
  Anyway, if you want to use external monitor and switch successfully to him you must install the utilities and tools of Toshiba. There are several of them and allows you to use the FN + F5 key combination and move your desktop to laptop LCD display to the external monitor.

  Can you please tell me one thing: have you installed all the stuff of the Toshiba download page according to document Instructions of facilities?
  The configuration of the laptop is not known to me, but try please check the Intel properties and let me know if the external monitor is recognized in properties. Usually, you can choose to use the external monitor there.

  You can also start Toshiba HWsetup utility. There must be tab display. There you can also find an option to use the LCD screen + monitor at startup.

  Check it out please and post the results.

• my screen is black at the start. not bios. No beeps. external monitor does not work either.

  I have a G62-343NR which suddenly stopped working after I tried to do a Windows Update.  At the present time, when I try to turn it on, I hear the fans whirring and the HD, kicking, but there is no beeps & my screen remains black.  The wifi stays on, but my caps lock button will Flash.  I thought that the screen has gone bad, but when I plug my external monitor, it does not show something or the other.  I tried to insert a Windows 7 installation disc, but nothing appears on the screen, and no beeps are heard.  The fan is turned on.

  Any ideas or solutions?

  It was running Windows 7.

  Hello

  It looks like not a component on the motherboard does not, but it is worth trying the following.

  In regards to the link below, delete one of your modules of memory and then see if the laptop will start.  If it doesn't, try the same module, but in another location.  If it is still won't start, try just the other memory module in both slots, to see if any combination will allow the laptop to start.

  The procedure for withdrawal of these modules is detailed from Page 55 of your & Maintenance Guide.

  Kind regards

  DP - K

• Windows 7 does not detect my external monitor. Why? How should I do?

  Good, some basic information. The laptop at the origin of the problem is an HP laptop.  In other circumstances, I wouldn't care on this issue. But the screens on both of my computers cell phones don't work (they are Sun and incredibly difficult to see, barely visible) and I use an external monitor so for use.

  In other words, I used.

  I have Windows 7 for one of my laptops, and it is already fully charged. But, I tried to connect my external monitor, it did not work. I tried to use the projection screen, pressing [FN + F4]and pressing on [FN +] other F keys, as well. Of course, I thought it was weird. So I looked for answers on the internet (on my other laptop), nothing works. Most only have problems with the monitor not working not properly; mine is not detected at all. I went to the display settings (have to squint shine with a light and bend my laptop screen in different directions), and it showed only 1 screen, the main screen. I tried to restart, stop, unplug the monitor and in him plugging back and turning the cable around. I know that the problem is not the cable, as I use it right now.

  I also tried updating the drivers, but for one reason, the laptop now refuses to connect to the internet as well. So, now, I have a laptop completely useless with a black screen, and I can't put my files on it because of this black screen. Not that I'd be able to use it for something else, anyway.

  Hello

  Thanks for posting your query in Microsoft Community.

  Have you tried to connect the external monitor to another laptop?

  You can view the following items according to the questions:

  For problems with the monitor not detected
  refer to the suggestions of Geethu B responded requesting 24, 2012

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/second-monitor-not-being-detected-Windows-7/0f8754dd-64da-4B25-aecf-341a19ebf469

  For problems with not able to connect to Internet

  Refer

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-in/Windows/cant-connect-Internet#1TC=Windows-8

  For the black screen of questions, check in safe mode:

  Safe mode starts Windows with a minimal set of drivers and services.

  http://Windows.Microsoft.com/en-us/Windows/Start-computer-safe-mode#start-computer-safe-mode=Windows-7

  If the computer works fine in safe mode, try the system restore, then check.

  Perform the system restore.

  http://Windows.Microsoft.com/en-in/Windows7/products/features/system-restore

  Note: When you use system restore to restore the computer to a previous state, programs
  and updates that you have installed are removed.

  I hope this helps. Please let us know the results. Feel free to write us again for any help.

• Qosmio X 300-problem of external monitor

  Hi all!

  I am the proud owner of a 300-157 x, but I have a problem. I would use my laptop as a desktop workstation and use an external VGA monitor to the output.
  Everything is fine when the operating system (Vista or Ubuntu) is responsible, but I can't figure out how to make the external monitor to view BIOS and POST messages to completely get rid of the internal display.

  Any clue?

  >... I can't understand how the external monitor to view BIOS and POST messages to completely get rid of the internal display.
  AFAIK this option doesn't exist. In General, computer laptop Qosmio is designed as a multimedia mobile gear and games. Of course you can use it with external screen or a TV, but I think that it is not designed to be desktop replacement. For example, professional laptop computers Tecra and Portege that can be used with a docking station to have multiply and different options for use with external display.

  I had X 300 but I ve never used it with external monitor so I can't say with certainty how it works but if I m remembering well this option to disable the laptop computer's display is not available.

  Every time when you want to use your laptop as a desktop replacement you should open it, start it, wait that the OS is fully charged, switch to the external display (FN + F5), and then close the cover.
  I know it's a little annoying, but, more or less, in 2 minutes, you can use your laptop as a desktop replacement, especially if you use an external wireless keyboard.

• Satellite A100-451: external monitor aspect ratio is wrong

  Hello

  I have a Sat A100-451 running Vista. I want to connect an external monitor. I have a SyncMaster 913V 19 "flat screen, I have tried to connect. This worked OK, but the ratio is bad & I can't find how to change it using the menu system monitor.

  I found how to switch between monitors, no problem.

  The screen seems to be that led 'default' Sat A100, the nvidea driver.
  Should I install the external driver of samsung moniotr (I have the disc) or if it might upset the own Toshiba screen?

  Help & advice please

  Thanks as always

  KK

  Hello

  > Should I install the driver of samsung external monitor (I have the disc) or if it might upset the own screen of Toshiba...
  First of all the graphics driver is necessary and important to run and use the graphics card with maximum performance and NOT the external monitor!
  I'm sure that the external monitor software was not designed to run the graphics card but to activate and control some options of the external monitor.

  Anyway, you can try to install this software rendering, but you must understand that this software will not replace the graphics driver installed nVidia of Toshiba.

• Equium A110-252: the display on the external monitor resolution

  When I connect my LCD TV screen to my new satellite A110-252 using the external monitor port does not fit the image of the (too big) TV screen.

  I've tried everything on orders for establishment of TV screen but no joy. Surely, there must be an option to fit to the screen on satellite? Can anyone help?

  Thank you Perry.

  Hi there, you are using the external monitor port or the S-Video? Unfortunately, if you use the S-video port you can hold all of Office on television because it is technically impossible (without deleting the lines).

  TV less than number of rows than a computer monitor: PAL = 576 visible lines, NTSC = 480 visible lines except if you can pass in 640 x 480 mode 800 x 600 is the best that you can use to display an image on the TV.

  Richard S.

• Computer laptop 15-ac111TX: external monitor not recognized

  After completing the last HP updates, including a BIOS update computer restarted and now cannot recognize the external monitor. Have you tried another cable and monitor and video card setting never display monitors.

  Already tried a reinstall the video driver

  Hi @olliessbrown,

  Thank you for visiting the Forums HP's Support and welcome. I looked in your question about your HP ENVY laptop and problems with the HDMI does not properly. Try to use this update all the drivers who might not have are yet.

  Please let me know how it goes.

  Click the thumbs below to thank me for my efforts!

  Thank you.

• External monitor works but integrated screen is not

  Hello

  I have a model of Macbook Pro 13 of the retina (mid-2013) .

  A few months back the display has stopped working, but when I hooked to an external monitor everything worked as expected except the screen of course.

  I took it to the service center and a descent computer repair shop and they both said that display connection with the logic board is fried and they need to fix the logic board that retina display is fine.

  The price they are quoting is about $ 900, which is not fair.

  The logic card cannot be repaired?

  anyone else in a similar situation?

  If all the otherwise failed I think I'll delete the entire display of macbook. Someone knows how to do this?

  Thank you!

  Welcome to the CSA!

  Because of the tiny parts and connections on a logic board, repair is usually not an option. I don't say it can't be done, but it's hard to find someone who can / will work on resolder delicate bits on a LB (redistribution) without making a mess of labor law.

  You live in the United States? If so, ask about a "repair." Instead of working on the computer in the Apple Store, they send to Apple rehabilitation center where they pretty much fix everything what they find wrong inside (with the exception of the display unit itself) for a flat rate that is much lower than the cost that you quoted for repair in the store. I believe that the current price for this service is approximately US$ 315.

  The only downside I see is that the repair takes about a week, largely during the transportation to and from the depot.

  If you are not in the United States, ask anyway. I don't know what Apple has implemented for this kind of repair outside the United States.