External USB-soundcard crackles when a/c is connected to a Satellite A series

Similar Questions

• External USB 250 GB HARD drive does not connect

  Hola everyone,

  A year ago I bought 2 this record.
  Now, the two (running on different stand-alone on Windows 2000) do not contact for the pc. The LED is red and blinking blue.

  The doesn´t of "fantastic" manual say anything.

  Any ideas out there?

  Hello

  I have no idea and I don't know what you're doing with your drives, but it will be interesting to know if you have tried to do something to solve this problem.

  Let moments hard drives without power and try to connect again.

• There is only one drive when you use the recovery on the Satellite L series disk

  Hi, I just reformat and reinstall windows using the toshiba recovery disk, before this fitness, I had 2 drives, drive C and drive D, theres now only one C drive.
  Also when I press the SHIFT key and simultaneously press the key with 2, trying to type "to the rhythm of the sigm" that is used for e-mail messages that she address types "" "(ouvrir invertated signe de coma)."
  can someone please

  see you soon

  Hello

  OK the first issue should not be a problem. If the recovery does not create a partition which is normal and ok. If you want your second partition to a partition Manager (just google for "partition manager") at the time and re-partition your hard drive. That's all.

  Regarding your "" "problem: could you explain again what you want?" I mean when I type 'Shift + 2', then I get ", whereas the problem?"

  Welcome them

• Touchpad behaves erratically when the AC is connected to the Satellite L300

  Hello

  I have a laptop Satellite L300D and after an accident falling on the floor, the cursor of the mouse erratically when the laptop has is plugged into the power outlet. If the laptop end.
  I would be extremely grateful if you could help to solve this issue.

  Thank you for your time. :)

  Matthew

  Hello

  I have read in this forum about the same topic and guess what? The bad sector affected adapter the touchpad
  Yes, a guy has replaced the power adapter and this has solved the problem with the erratic touchpad.

  In my opinion, you should check if new AC adapter will help you
  I think it will be

  Welcome them

• Satellite M300: speech recognition only works with external usb hub

  Hi all

  I have the Satellite M300 I could run the speech recognition program before you have the motherboard replaced due to failure of the usb.

  I found using the headset, I can not reach high enough quality to operate it.
  The only way I can use the Word program, use an external usb hub with its own power supply.

  The problem concerns the audio card, or simply not enough voltage?
  And na fix?

  See you soon

  Craig

  Hello

  The notebooks of USB ports provide a standard power of 500 my.
  As I said that it is a standard, but in USB devices different part 3 external cases need more power.

  For example, one of my external USB 2.5 HDD s must be connected with two USB ports at the same time to ensure that the HARD disk would get enough power to function properly.

  Your external card is unknown to me but maybe it needs more power as usual.

  Welcome them

• Windows 7 Home Premium 32-bit on a Dell Studio 140g running a NETGEAR WG111v2 54Mbps Wireless USB 2.0 adapt and loses the connection permanently

  I have a problem with this program-it very often loses the connection, so with any live video as a conference, he fall causing problems with, naturally, the frustration on both sides. The router is in another room may be just 25 feet away maximum which the signal passes through 1 wall and offered "free of charge to AT & T TV and Internet clients" so a technician said as saying "it's just a basic router", but the signal goes further to a TV, another 20-foot more away and had no problem connecting unless it is with the AT & T network itself. Even if he reconnects automatically most of the time, but sometimes I have to manually reconnect which can take of time also a lot of time. I had another SATA driver and separate, which was working fine then one day abruptly stopped and now that the driver to reconnect and I was forced to use the old and original driver and I'm back with the same problems. I can't find where it is that I found this other, independent driver, even with a search, and now I have no idea how to solve. I tried all suggestions with Microsoft Fix It without modification done or as it says "no changes have been made, your driver is up to date" and I have tried these suggestions and now I'm here. I also went to CNET to search for a driver, but not luck to everything I've read about the drivers there. Finally, I intend to go with another program called Easy Wifi Radar and I don't know what would be better to use Wifi adapter and since I have a few target (store) [s http://www.target.com/s?searchTerm=wifi+adapter & category = 9975894% 7CAll % 7Cmatchallpartial % 7Celectronics & lnk = snav_sbox_wifi + adapters] I guess I'll take the adapter on their part and their site search , I see a lot to choose gift cards, but who would work better with my system and this program of "Easy_WIFI_Radar"? Any suggestions? Maybe a better deal with another source of in-store/online Wifi adapter?

  Hi David,

  Thanks for posting on Microsoft Community.

  I understand that you have connected the external NETGEAR WG111v2 USB adapter to work with wireless internet and the connection is intermittent.

  Maybe it's because the wireless USB card driver and it is perhaps because of the hardware (USB wireless card) itself.

  Try the suggestions below and see if it helps.

  Method 1:

  You can try to download the latest Firmware utility from Netgear support site and check if it helps.

  Check out the link below to download the latest firmware for NETGEAR WG111v2.

  http://Downloadcenter.NETGEAR.com/en/product/wg111v2#searchresults

  Method 2:

  Dell Studio Hybrid D140G may come with the card wireless in the generation in it, you can try to disconnect the external USB NETGEAR WG111v2 adapter and try to connect to the network card wireless wireless generation.

  To connect to the wireless network, please visit the link below.

  http://Windows.Microsoft.com/en-in/Windows/view-connect-available-wireless-networks#1TC=Windows-7

  Method 3:

  Try disabling your antivirus software that may block the incoming connection wireless.

  NOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Hope this information helps, please reply with the status of the issue for further assistance.

• suddenly stops when the external usb hub is attached

  My imac 27 inches 5 k 2015 suddenly stops when an external USB hub is attached supposedly designed specifically for the mac. (Cutting) The mac does not start I have to unplug it and reconnect to restart. I tried different hubs of this manufacturer and all do the same thing. Remove the hub, the computer is fine. Any ideas?

  Well, try an another factory USB hub, I had good success with USB hubs powered from Belkin.

  Question... are the hubs help powered or are bus powered USB? They are bus powered USB is your problem, the USB ports on iMac didn't supply enough power to power bus-powered USB hubs.

• Satellite L310 - D4010 Windows XP crashes when connecting external USB HDD

  Hi friends

  I use the L310 - D4010 Windows XP machine.
  When I connect a USB external hard drive with it, it crashes. Nothing works after that.
  Please help if any similar problem with one of these in the computer toshiba laptop.

  Thanks in advance
  Joy

  Hello

  This happens with all the external USB device. for example the USB?

  You updated Win XP to the last State?

  Have you tried to connect external USB HDD to other machines with Win XP?

• Computer do not normally sleep wake up and the computer hang when external USB devices are connected

  Hello

  I have a Windows 7 Home Premium 64-bit desktop CyberPowerPC, and there are currently two problems with it:

  1.), I have two USB ports in the front of my case. I am connected to my computer. Then I tried to connect my external hard drive using the USB cable supplied with it, but just at the moment where the end of the USB cable touched the port, the screen is black and automatically rebooted and froze when the display shows the brand CPU that is before the login screen. I actually press the restart on my case button to restart the computer with the hard drive already plugged. Then everything should work normally.

  It's the same thing when I tried to connect my iTouch 2nd generation.

  This problem occurs sometimes, however, but I wonder if someone always has a solution to this?

  2.) whenever I put the computer to sleep and he remains asleep for a while and I turn it on it once again, powers for about 2 seconds then it turns off. I have to turn the power supply and light in the order so he could get out of mode 'sleep'.

  I was wondering if you have solutions to this problem, as well.

  Thank you.

  Original title: new Windows 7 problem

  Ok.. I'll try again...

  The problem is caused by a bad 'ground' between the USB ports of the case and the motherboard. Static electricity is originally the USB device to short on the USB port which is originally the motherboard restart mode.

  I had the same problem and got my computer case exchanged. The problem has not entirely disappeared, and I use the USB port on the front on the card reader, just in case.

  It can also be a problem with the power supply or even the motherboard. It is very difficult to locate the failure without replacing in turn, a process that happens to be a bit expensive.

  The above is the reason why I recommend that you contact the MANUFACTURER. Don't take no for an answer off the manufacturer or supplier. It is a problem annoying which can eventually damage your operating system if it is enough...

• When you connect 1 or several external USB drives, why is the letter a * shoot?

  When you connect 1 or several external USB drives, why is the letter a * shoot? Referencing external drives through library (Windows V7) becomes a really shiny, totally useless feature without consistency of drive letter. Or unnecessary to be a design goal? I almost had it still works but who finally to 3 minutes). What it will take to make useful new features?

  Windows assigns the first available on the first hard drive connected and one drive letter to another and so on.  Always has, always will. What will help sometimes (but), is to open disk from an elevated command prompt management and adversely affect permanent a letter from your external drive which is much higher than the letters in use.  This will often allow the will to keep a letter.

• Disk error non system at boot when using the external USB disk

  Hello

  I use Windows 7 Pro.  I have a Seagate external USB disk causing a "Non-system disk error" at startup.
  I had the same problem with a Clickfree drive.
  The problem occurs on my other PC with different versions of Windows.
  How can I get my computer to start and not give me this error message for my backup drive?
  At startup (when the drive disconnected), I get a screen of BACK indicating "Client Mac Addr."... GUID..., DHCP. "I think it's looking for a disk boot from.
  I just need to boot from the internal hard drive.
  Thank you
  AS

  USB external references aren't desingned to be connected on startup, you must also use the safely remove the procedure and disconnect the USB key before closing.

  If you get such a screen "Client Mac Addr... etc" at the start (with usb unplugged), looks like you are using a very old motherboard. If the system starts only with connected usb, then your initial installation of victory is defective or damaged

• External Usb Audio Card Popping and cracking sound with Satellite L500

  Greetings,

  My name is Boyan and I am from Bulgaria, and a year ago, I bought a laptop satellite l500 series (I can't tell which is exactly the model at the moment because my computer is not currently with me and my user manual, the only thing that is said is that it is for L505/L500/L500D / L505D.) But from memory I think it was the Satellite L500D-ST5506 which is currently not at my dispossal, because I gave him for repairs for the same problem that I say down below)

  The problem with my laptop, is that when I plug in a Usb Audio card in my laptop I have a crackling sound during live sound is played hollow map external speakers/headphones. I tried several sound cards and speakers/headpohnes which work perfectly well with other computers, including laptops, but the problem continues even when I use an external sound card to connect to the laptop not appearing in my laptop speakers/headphones.

  The problem is important only when the signal passes through an external audio card and it is very disruptive since I use my laptop to create music and I bought a sound card expenssive and speakers that can not be used with the laptop. I tried 3 types of sound cards:

  M-Audio Fast Track Pro

  BEHRINGER uca 222

  and a simple 3d audio usb audio card external and the problem persists.

  At first, I thought that the problem is software and I should install the new drivers, windows 7 automatically recognizes and installs the drivers for the devices and I have its in (but with the cracks and educated) so I tried using the official drivers sold for me with the sound cards, but without success: the problem was still there. I tried to find the new drivers of the sound cards on long official distributors and I downloaded it but the problem was still there. Then I tried to delete all the audio drivers on my computer and just use the external sound card for sound but this eighter helps force. I updated my drivers for my sound card build - in as well but again - no luck.

  After substantial thing frist I did when (2 weeks after I bought the laptop) was to contact the store where I bought my audio card and they said that the problem may be so eighter latency or high voltage of the laptop they advised me to try to reduce the latency of the parameters or to try and see if the problem persists if only my laptop running on battery power. I tried two things, and they did not help. Audio cards worked without problems on all the other computers I tried them but me. So they told me that the problem could not be audio cards.

  What I then was that I gave my laptop for the Distributor official of toshiba in my country so that they can solve my problem. What they told me, is that a problem with the version of windows which was preinstalled on my laptop and it was not compitable with the sound cards (which was bizzar survey because I tried them on the same windows and they worked, only on other computers). So I'm back from my laptop and passed under my Windows 7 Home Premium 64 bit operating system to Windows 7 Ultimate edition 64-bit and Windows 7 32-bit Ultimate edition on all versions, that's the problem: whenever I activate a low of passes of audio signal and Audio Usb card he heard cracks and educated. I even tried isntalling Windows XP, but the laptop want spesific SATA drivers for the Windows XP installation which although I found - they helped me install XP and I didn't go the BIOS of the computer to try to put a new and so on, because I'm not sure about that and I could lose my warranty so I said in the official repair shop for Toshiba in my city to put XP on my computer to solve the problem but they can't because they are not liscened to work with software that isn't a recipt for its purchase (which I did not because I bought my windows xp a long time ago and I lost the recipt)

  I gave her to get it repaired for the second time by telling them that the change of my operating system has not solved my problem and what they were doing was they changed the motherboard on my computer, indicating that the build in the device realtek audio on my computer is good enough to support a card usb audio or it may be broken and they change the whole motherboard because the generation of card is stuck, so they did it, but my problem has not been resolved. They told me that although I use and map external audio usb signal always going trough my only internal and I have to disable so I tried to disable this trough Control Panel, but this does not solve the problem and I don't have a BIOS option to disable my sound card build-in. Another thing I thought that maybe the problem is that two audio cards do not work on the same bitrate and Hertz so I put both cards to 16 bit 48000 Hz DVD quality (also tried the other options on the 3 cards that I have) but it's the same thing.

  They told me that it's just my luck and the construction of the sound card does not support this external sound cards and I would had been more careful when they choose to my laptop first.

  I couldn't accept this awnser for several reasons:

  (1) this sound card works on a lower version of windows and are supported by many older models of Realtek and a lot of old computers (one of them bought 2000! and my laptop is of 2010!)

  (2) the guys who were the apperantley of fixing problem don't go so deeply into my problem because they didn't know that in fact the problem was that only they knew that there is a problem with the audio card and the computer interact with them, they knew not that it cracks during the direct play the external audio card.

  (3) I can't accept the fact that Toshiba is manufacturing of models with maps audio chipset that cannot support a simple external Usb Audio card. It is totally unacceptable to me, and I sincerely hope that this is not the case!

  (4) they have tried my audiocards on another laptop of the same series, claiming that they have not at their dispossal at the moment so I'll go tomorrow at a local store and try the sound cards by myself on the same computer in the store.

  What I have now, it was that I gave my laptop for repair requesting a statement of the problem in wrtting with details of the problem so I can go to court or ask for a new laptop, but I'll be charged with little money because according to them there is no problem in the laptop and the problem is that my external sound cards are not compitable with the build in house chipset sound card. If I give my laptop for repair, and there is no hardware problem, I'll have to pay the money. I will do this, but I'm now crazy, because that does not solve my problem and I am wasting time and money.

  What I ask here is, if you can not help me solve my problem and advice me what to do to fix it, please give me the details of the chipset built in Driver sound card on my motherboard, so I can check if it is compitable with my external sound cards and contact the dealers of the sound card to ask them their opinion. Or if you can tell me what it is compitable with and what not, that would be great. Personally, I think this laptop should have no problem at all with a simple external usb running sound card, but I ask you, if you know something more about it.

  If a problem with the build in chipset then Toshiba is manufacturing (or at least sell) audiocards which are not in a normal standart but unfortunately I can not do nothing except complain to Toshiba and never treat whith such productgs more. Otherwise, if this is not true, then my laptop has a problem that is different and I have to go to court with the mans for mounting repair is not my laptop or do not give a new one when I guarantee will not fault of Toshiba and it will be in a way solve my problem.

  I hope that you understand how important it is for me and I hope I have fix the problem as soon as possible.

  P.S

  I want to say that I am familiar with grammar mistakes, that I did in the text below, and I would ask your excuses that I'm not a native speaker of English.

  Hi, I would just say that I had a similar failure although I wouldn't be surprised if she causing of yours, but you never have knowledge, my fault was the lid of my laptop [9 months], it contains the mic and when the lid has been in a certain angle cracks could be heard worse when I got my external sound card all the time it happened, luck, PS, it's a defective membrane [lid to the body] easily missed by engineer because he was the same angle you English is very good

  Post edited by: sido1

• Installation on disk external USB - "Closed circle" after the first restart of the installer

  I tried to install on my MacMini Sierra (end 2012, Mavericks) to an external Seagate USB 3.0 drive 3TO. The drive is freshly formatted with utility disk (, logged, etc. extended partition GUID) and retired in good health.

  Installation always fails on the first reboot. On the first reboot, the screen goes black, there is a white Apple and white progress bar that moves two or three times to the right and then clears the screen and dreaded him circle with a diagonal line appears. Force reboot simply repeats the process.

  So, I decided to try and install the Mavericks (the OS on the internal SSD flash of the Mac mini disc) of the partition of the USB 3.0 drive recovery external. This eventually ended up with a white screen, the dreaded circle of diagonal and a widget of rotation for several hours. Force restart it worked and a new Workgroup installation Mavericks was now hard disk external and implemented to date.

  Another attempt to install Sierra on the external hard drive, but this time the Mavericks running on the external hard drive is not in the same way with the dreaded circle and the diagonal line.

  Near ideas, I tried to install Sierra on an old Seagate 500 GB disk firewire external hard. Shock, horror... it worked without any problem.

  Sierra is simply not install on an external USB 3.0 :-(3 TB drive

  Someone has it successfully? Any ideas?

  The saga continues...

  I tried the USB of the FW - same problem Imaging reader drive.

  I tried to start the Sierra - same problem recovery partition USB drive.

  WORKAROUND SOLUTION:

  I plugged the USB3 drive on a cheap Chinese USB2 hub and... Sierra, booted from the USB3 drive! Obviously not ideal speed wise, but it'll do for now.

  Sierra really dislike my external Seagate Go Flex Desk media USB3 drive when it is plugged directly into a USB3 port on my Mac Mini end of 2012.

  [Keep in mind, the Mavericks had no problem installing and running on the drive USB3.]

• G5 Powerpc does not start with connected external USB

  Core PowerPC G5 2.3 duel starts when I have my usb external 500 GB on drive but it works perfectly well if I boot

  with it goes off and then start and turned on after my mac started in Leopard 10.5.8 external USB is a 500 MB TARGA

  I have a WD elements 2. TB disk connected as well and I have no problem with it, it's a pain to remember to put a stop on all the time.

  Anyone have any ideas on that.

  Drive external hard there an independent supply?

  What happens if you attach externally to a different USB port?

• 320 external USB HARD drive won't boot

  Hello!
  After working fine for 5 months, my disk 320 external HARD USB is now showing that it is not initialized. When I go to disk management and click to initialize it, it won't boot. Can someone tell me how to make this work? I'm sure I'll have to format too, but can't find any way to make that without initializing the HARD drive first.
  Any help would be appreciated.

  Hello

  Try removing the USB ports in Device Manager. After restarting again the USB ports should be recognised again.
  Then again connecting the external HARD drive.

  The second possibility is to use an external USB hub with an additional power supply.
  It is possible that the HARD drive needs more energy than the 500mA