Extract channel numbers

Similar Questions

• The channel numbers and the USB-6259 BNC

  The front panel USB-6259 BNC labels BNC connectors as channels 0-7 and 16-23. Most odd... I have a software written in C++ using NOR-DAQmx that my client will try to use with this unit. When using the channel superior numbers he (not unusually, really) Gets the error-200077 saying that they can only be used in unbalanced mode. But it is not natural for him to use the channel numbers printed on the front of the unit.

  Can someone tell me how the front panel of this device is the channel numbers, you must specify in the code?

  This requires the switch (source of the source/grounded) floating FS/GS that appears under each BNC connector?

  Here's my proposal: differential mode: in the software, channels 0-7 are front channels 0-7. Software 8-15 channels are front 16-23.

  Asymmetric mode: software channels 0-7 are cover 0-7 and 16-23 software channels front 16-23. And 8-15 and 24-31 channels are absent...

  It takes just the opposote of what you have. In differential mode, aix is paired with aix + 8. so, ai31, ai9, AL10, ai11, ai12, ai13, ai14, ai15, ai24, ai25, ai26, 27, ai28, ai29.ai30 and ai8 channels are not available for selection in differential mode. Front panel for ai15-23 labels should be correct and matches what you select in the software.

• In the VI library OR: extract, control of the channel numbers are loaded automatically every time that the VI is open with "count to five: a 2 three 4.0 five." Whence this string of data?

  Even after the removal of the string "count to five: a 2 3 4.» 5."since the control of the chain and its replacement by another string, the original string returns after that the VI has been saved then reopened. Whence this string of data? I have attached a copy of the library feature. In my application, I was able to work around the problem by replacing the chain with a constant string control. But I'm still curious to know what is happening.

  Thank you
  Chuck

  Chuck,

  Chain drive was scheduled by default with the string you see.  To change it, enter the new string, right-click on the control and select

  Operations on the data > default font of the current value

  Now, save your vi.

• Extraction of numbers of MySQL via DatabaseLink

  Hi all

  After getting my link of database work, now I have the following problem...

  I'm trying to extract some of the columns of the MySQL Server

  SELECT Article, ArticleNo, Price_B, Price_N

  OF tblArticle"@MYSQL_DB «»

  Article and ArticleNo are the TANK columns and averything is fine, but Price_B and price are DECIMAL columns (9.2).

  and I get a number without decimal places.

  Article ArticleNo Price_B Price_N

  A 24,67 A123 51,43

  results in

  Article ArticleNo Price_B Price_N

  A 51 24 A123

  How can I recover the MySQL decimal columns correctly?

  I tried tronque() and ROUND(), TO_CHAR(), but nothing has worked...

  Thank you

  Chrissy

  What is MySQL, store numbers decimal with a number or a comma as decimal separator?

  Try setting HS_LANGUAGE = american_america.we8iso8859p1 in your gateway configuration file. Then open a new SQL * Plus window and select in the table. The decimal places are now displayed?

  Otherwise, close the SQL * Plus session and change the HS_LANGUAGE to german_germany.we8iso8859P1. Then again open a new SQL * Plus window and check.

  One of the parameters territory should work according to the decimal separator used in your MySQL database.

  -Klaus

• Channel numbers are not what they should be! CS6

  Hope someone can help me.  On Photoshop CS6 on one of my machines, it is changing the channel # 2 RGB numbers, red #3, green is #4's blue #5.  They should be 1,2,3,4.  Anyone know why this is happening?  This only happens on a copy of Photoshop.  I looked in the prefs and can't find anything that could change that.  Thanks in advance for your help.

  Floyd

  Edit-> keyboard-> channel Legacy shortcuts shortcuts

• If I use a few channels on PCI-6259 to increase the sampling rate, channels numbers can I be contiguous?

  We are looking to buy a card PCI-6259 usable on a Linux machine. We would use NIDAQmx to access the card. If we were to use only a few channels to increase the sampling rate, do I need to select specific channels?

  For example, the card is 1 MHz. If I select the channel 1 and channel 2, I can taste each channel at 500 KHz. could I choose 8 channel and channel 13 and still be able to sample each channel to 500KHz? Or need of specific channels to use when a subset of channels are selected?

  Thank you

  -Tom

  Thanks for the quick response.

  -Tom

• When extracting the numbers

  Hello Experts;

  I have similar data to below

  	Select ' LAT: 41N 39' | Chr (39) | ' 13' lat ' LONG: 90W 10' | Chr (39) | ' 35'. Chr (34) as double longi
  	Union of all the

  Select ' LAT: 34N 22' | Chr (39) | ' 36'. Chr (39) | Chr (39) lat, ' LONG: 88W 58' | Chr (39): '. 13' | Chr (34) as double longi

  	Union of all the
  	Select ' LAT: 42N 52' | Chr (39): '. 279' lat ' LONG: 94W 56' | Chr (39) | ' 49.2 ft | Chr (34) as double longi
  	Union of all the

  Select ' LAT: 27N 55' | Chr (39) | "47,21' | Chr (34) lat, ' LONG: 91W 59' | Chr (39): '. 11' | Chr (34) as double longi;

  Expected results

  Lat long

  41 39 13 90 10 35

  34 22 26 88 58 13

  42 52 94.279 56 49.2

  27 55 47,21 91 59.11

  Any help is appreciated. Thank you

  Hello

  Here's one way:

  SELECT REGEXP_REPLACE (lat

  , ' \D+ \D+ (\d+) \D* (\d+) [^. 0-9](\d*\.? \d+).*'

  , "\1 \2 \3".

  ) AS new_lat

  REGEXP_REPLACE (longi

  , ' \D+ \D+ (\d+) \D* (\d+) [^. 0-9](\d*\.? \d+).*'

  , "\1 \2 \3".

  ) AS new_longi

  FROM table_x

  ;

  This assumes that all strings containing at least 3 numbers.  If a string has 4 or more numbers, all except the first 3 will be ignored.

  Each number can have 1 or more digits.

  The 3rd number can contain a decimal point; If so, digits before the comma are optional.

• Remove unnecessary characters, space and channel numbers

  Oracle 11.2.0.1

  Windows

  I have data from the table like this:

  David Parker

  Robert Josh

  Hick 1/4

  John ' Fowler

  Bill.Gates

  Herman Patrick «»

  Andrew % Clark

  I want to delete all the numbers, special characters, more than one space between the words and make the correct name.  How can I remove extra characters from string.

  In fact, we get data that has sometimes special characters, including numbers and more spaces in name and it still creates a bad output query.

  Thank you.

  Or...

  SQL > t

  2 ALSO (SELECT "David Parker' DOUBLE str")

  3 UNION ALL

  4. SELECT 'Robert Josh' DOUBLE

  5. ANY TRADE UNION

  6. SELECT ' Hick' 1/4 OF the DOUBLE

  7 UNION ALL

  8. SELECT q ' [John 'Fowler'] ' FROM DUAL

  9 UNION ALL

  10. SELECT 'Bill.Gates' FROM DUAL

  11 UNION ALL

  12. SELECT q'[Herman 'Patrick']' FROM DUAL

  13 UNION ALL

  14 SELECT q'[Andrew % Clark]' FROM DUAL)

  15 SELECT regexp_replace (str, "[^ A-Za-z] + ',' '") final_str

  16 FROM t

  17.

  FINAL_STR

  -----------------------------------------------------------

  David Parker

  Robert Josh

  Hick

  John Fowler

  Bill Gates

  Herman Patrick

  Andrew Clark

  7 selected lines.

  SQL >

• How to restrict user entered numbers/extracts only numbers

  qst1- I use a text input (flash component) to which the user will enter numbers only in (the integers and floating-point numbers) but not any other symbol.

  Copy the following code

  
  on keyDown me
  

  If ("1234567890 -") contains the key or the key = backSpace or key = tab keyCode = 123 or the keyCode 124 = then
  Pass
  on the other
  stopEvent
  end if
  
  end

  works fine when I use it with old text style of the fields to the Director. However, it does not work with the new flash component style (text).

  QST 2- and, possibly, very simple problem:

  I have an another text field that the user must enter numbers (integers or floating-point number), separated by a comma. Then after the button presses to calculate a mathematical operation on them.

  What I need is access to the numbers only (and not commas) in a list then do some math advanced on these figures.

  How can I write a piece of code for this?

  My own code

  
  

  Repeat with i = 0 to nPoints-1
  xList.append (float (xTmp.char [2 * i + 1]))
  end repeat

  (where he resumed (2 * i + 1) odd number entered (e.g. 1. 3 5. ..., because I know that users start with the first number in position 1 then separate with comma second number gets 3. position,...)

  As said it does the job only if the whole written user and the code does not work when the user enters decimal numbers.

  Any suggestion/help is appreciated?

  Best regards!

  HUMAN RESOURCES

  QST 2

  I have an another text field that the user must enter numbers (integers or floating-point number), separated by a comma. Then after the button presses to calculate a mathematical operation on them.

  What I need is access to the numbers only (and not commas) in a list then do some math advanced on these figures.

  How can I write a piece of code for this?

  Have you considered text segmentation in defining 'itemDelimiter' and then grabbing point-by-point? For example:

  aString = "1,2,3,4,5,67,3.1415"
  the itemDelimiter = ","
  put aString.item.count
  -- 7
  put aString.item[7]
  -- "3.1415"
  

• Extraction of numbers, no strings of text entry fields?

  Hello

  I have two input boxes that I can type numbers in.  I would like a third entry check box to show the total of the first two.

  I set up a listener to button on the stage to perform a function that adds together when a key is pressed.

  It comes, he puts just the strings together - it ddoesn can't add them

  So, how can I tell Flash that box1.text and box2.text are numbers?

  Box3.text = box1.text + box2.text is not doing.

  Thanks for your time.

  Shaun

  Hi celebrities music

  You will need to get the string to a number.  Something like:

  var firstNumber:Number = Number (box3.text);

  var secondNumber:Number = Number (box2.text);

  answer: var number = firstNumber + secondNumber;

  Of course, you want to make sure that the text in the text field is actually a number and someone was not able to type in a Word.  The best way to do it is NOT to do the textfield a text entry field.  Instead make a dynamic text field and give it a MouseEvent.CLICK event listener.  When someone clicks on the dynamic text input field, bring up a keyboard that requires them to enter the number in this way.

  I have an application exactly like this one where students had to enter a number in a text field to understand the econ issues.  The workflow has something like:

  1. Click the dynamic text field
  2. Bring up the Enter key digital
  3. When the user clicks on a number on the keypad, text matching using a switch statement
  4. Add numbers to text in a string field, that way someone who, between '1', '3' '8' will get 138 and not 12.
  5. With each press of button, update the dynamic text field to show what the user enters
  6. With the user presses the Enter key, then mount this text field in number and store it in a variable of type number

  Hope that helps.  Let me know if you need help with the code for one of these steps.

• Get channel numbers

  Hi all
  
  I'm trying to get the number of a field in a query. All my results are as follows:
  
  "Transfer from 1500015162706' OR '1500015162706 transfer and more text here."
  
  I'm rather new to oracle and a little surprised that there is no function list in Oracle. A way to enter this group of numbers would be greatly appreciated. Or at least pointers.
  
  Thank you
  
  Bill

  In fact, there is a generic solution:

  with t as (
             select 'Begin transtaction. Transfer from 1500015162706' txt from dual union all
             select 'Begin transtaction. Transfer to 1500015162706 and more text here.' from dual union all
             select 'Begin transtaction. Transfer to 1500015162706.99. End transaction.' from dual union all
             select 'Begin transtaction. Transfer to .99. End transaction.' from dual union all
             select 'Begin transtaction. Transfer to 1500015162706. End transaction.' from dual
            )
  select  regexp_substr(txt,'(\d+\.{0,1}\d*)|(\.\d+)') num
    from  t
  /
  NUM
  ------------------------------------------------------------------
  1500015162706
  1500015162706
  1500015162706.99
  .99
  1500015162706.
  
  SQL> 
  

  SY.

• Separation of channel numbers

  Hi all
  
  In my project, I have a requirement where I need to remove the numerical values of the given string...
  
  
  For ex my entry: CLWMEK0299
  
  Expected results: CLWMEK
  
  
  Please please let me know as soon as POSSIBLE... '
  
  
  Thank you and best regards,
  Sudarshan
  
  Published by: Sudarshan on 28 March 2012 21:51

  RTRIM (, "0123456789")

• Extract/Scan for numbers of several lines of strings

  Hi all

  I want to extract (data) numbers obtained from an acquisition of series that will be shown in several online channels:

  $# pressure 20

  ! @temperature 100

  #voltage 1.2

  I want to extract 20 100 and 1.2 so that I can do more than manipulation of data. Should I use the regular expression to match? I couldn't get a good regular expression to extract the numbers.

  Thank you!

  
  

• How to extract text with regexp_replace numbers

  Hi guys
  I have the following... ' > 14 413 (4) > 14 567 (1)... »
  and need to extract the numbers to ensure...
  
  14413
  14567
  
  I used this command
  REGEXP_REPLACE (' > 14 413 (4) > 14 567 (1) ','-([^ ()] *------)', ")
  
  and got this response is still not ideal...

  14413 14567 >

  someone at - it suggestions...
  
  Thank you...
  
  
  I use oracle 10g r2.
  
  Published by: claudioaragao on 02/01/2013 07:28

  Hello

  Here's one way:

  SELECT  LEVEL         AS n
  ,     str
  ,     TRANSLATE ( REGEXP_SUBSTR ( str
                            , '>[^(]*\('
                        , 1
                        , LEVEL
                        )
              , '0 >('
              , '0'
              )     AS str_num
  FROM     table_x
  CONNECT BY     str     = PRIOR str
       AND     LEVEL     <= LENGTH (str)
                  - LENGTH (REPLACE (str, '>'))
       AND     PRIOR dbms_random.value           IS NOT NULL
  ;
  

  I hope that answers your question.
  If not, post a small example data (CREATE TABLE and only relevant columns, INSERT statements) and also publish outcomes from these data.
  Explain, using specific examples, how you get these results from these data.
  See the FAQ forum {message identifier: = 9360002}

• date, time and numbers of extractions

  Hi all
  
  Please inform me how can I extract just the full date, time with only AM/PM and numbers with or without decimal point.
  
  in the following query is extracted from the Date.
  
  Select regexp_substr ("Welcome to 08/08/2012 ',' [0-9] {1,2} [[: punct:]] ([0-9] {1,2} |)") [[: alpha:]] ({3}) [[: punct:]] [0-9] {4}') datesubstr
  of the double
  ;
  
  How can I correct the time as in the following
  SELECT REGEXP_SUBSTR (' Hello 12/12/2008, 10:22 nnnm mnj Sarah ',' [0-9,-------.] + [AM, PM]') result OF double;
  
  and how do I extract only numbers and numbers with a decimal point
  
  SELECT REGEXP_SUBSTR (' Hello to Sarah mnj nnnm 8898989898989 ',' [0-9,.]) ({1,}') are the result OF double;
  
  concerning

  Hello

  Isabelle wrote:
  Thanks a lot for you

  but
  SELECT REGEXP_SUBSTR (' Hello to 8898989898989.) Sarah nnnm mnj'
  , '([0-9]+\. [0-9]*)'     || -Start by number (s) (it may or may not have numbers after).
  '|'               || -or
  '(\. ([0-9] +)'-begins with a decimal point
  ) AS a result
  OF the double
  ;

  "If the numbers such as ' 9.11.2012 ' is not necessary to extract.
  I want to extract only when like this 9.11 or this 9,11 tike who is only average a decimal point.

  Your needs are still vague. No joke, you have to say exactly what your needs are and to give other examples. After 5 to 10 rows of sample data (CREATE TABLE and INSERT statements) and the results desired from these data. Explain why you want the results of these data.

  If you want to treat ',' as a decimal point as possible, how you stand out from the other commas? For example, the string would contain a list of integers, such as

  1,2,3,5,8
  

  ? If so, what happens if the entire string is

  1,2
  

  ? Would that be one (equal to 6/5) number or two numbers (integers 1 and 2)? Include examples in your sample data and results.
  I still don't know if a comma is necessary.