Extract lines of code with RegExp

Similar Questions

• shorten the few lines of codes with a loop for?

  Hello, I have a few lines of code I want to shorten.
  
  , Someone has any idea how to make this right?
  
  Thank you!
  

  :

• Fill the table with the formula nodewith a line of code

  Hello

  This is my first post of the community, OR maybe this question has been asked 1000 times but I could find no answer.

  Before using LabView I used Matlab a lot. I find a bit that it's too complicated without reason sometimes in labview work with arrays.

  I inherited, and I'm doing a little cleaning. what it does is extractr 2 and 3 position and creates a new table with her and another oner with other elements of the first table. In my view, that he becomes confused because you should rely on the cell of the table, the position of the output and I didn't wat to work this way.

  

  I replaced it with a knot of formula. Here is the code

  The departure is FP, the table of 6 elements is mdot and the 2 elements array is press

  MDOT float64 [6], press [2];

  MDOT [0] = FP [0]; MDOT [1] = FP [1];
  MDOT [2] = FP [4]; MDOT [3] = PS [5];
  MDOT [4] = PS [6]; MDOT [5] = FP [7];

  Press [0] = PS [2], press [1] = PS [3];

  Now, I want to know if it is possible to do as I would in matlab or C, where you can create a table with one line of code. What would the syntax in formula node to do something like:

  MDOT [6] = [FP [0], FP [1], [4] of FP, FP [5], FP [6], FP [7]];

  Press [2] = [FP [2], FP [3]];

  Thank you

  Use remove the table.  You can provide an index and length of elements to remove.  One of the outputs will be the original with the subset of the deleted table and the other output is the subset deleted.  1 NŒUD!

  EDIT: Created a snippet just after my previous post.

  

• How to remove the lines of code at the level of the site with different content?

  How can I remove the same lines of code at the level of the site?

  I want to delete all of the code line up to 4000 pages 50 - line 80, but the lines do not contain the same code can not use 'find and replace '.

  Any ideas would be appreciated - thanks.

  SED

  http://www.Panix.com/~ElfLord/UNIX/sed.html

  Can you show us 2 examples of code to remove?

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  http://ALT-Web.com/
  http://Twitter.com/ALTWEB

• Help with regexp

  Good day experts,

  How I would write this SQL using regexp:

  Select *.

  from all_source

  where lower (text) like ' % insert into table % ' and owner = 'TEST ';

  The problem is some programmers put the words 'insert', 'en' and 'table_name' in different lines and I can't get a match. Is it possible to catch them in the next row with regexp? or y at - it another way, I can see what database objects to insert into a table?

  Best regards

  Igor

  Hello

  Depending on how in-depth you want to be, use the PL/SQL.

  If you must use SQL, can assume you that each of the words you are looking for ('insert', 'en' and 'table') will be on 1 line?  If so, use LEAD and LAG to combine 3 lines, so you can test them all together, for example

  REGEXP_LIKE (text |) ' '

  || LEAD (text 1) OVER (PARTITION BY owner, name, type)

  ORDER online

  )

  || ' '

  || LEAD (text 2) OVER (PARTITION BY owner, name, type)

  ORDER online

  )

  'insert\s + into\s + table'

  , 'i'

  )

  Beware of duplicates.  For example, if line 43 contains the full text of target, then the above expression returns TRUE when the current row is 41, 42 or 43.

  Comments and completely Interline will interfere. you will need to remove them.

  PL/SQL will be easier to code and faster to execute.

• Please explain CVI question #335358: using the operator of bit-shift twice on the same line of code produces incorrect results

  Hello

  I just stumbled on http://www.ni.com/white-paper/12323/en#335358_by_Category.

  With the help of the bit-shift operator twice on the same line of code produces incorrect results.
  Workaround: Separate the operations of shift of two bits in two distinct lines of code.

  Reported Version: 9.0

  Solved Version: N/A

  Added the: 14/02/2012

  Could someone please explain what kind of construction causes such a question?

  I have not noticed problems again and not have not noticed or found a thread about it.

  Thank you.

  The reported scenario looks like this:

  unsigned int a = 1, b = 62;
  unsigned  long long result = 1ULL << a << b;
  

  The problem arises because of the temporary variable used when do two little is placed in the same line. This separation into two lines will produce correct results:

  unsigned int a = 1, b = 62;
  unsigned  long long result = 1ULL << a;
  result = result << b;
  

• What these lines of code?

  Hi all!

  I don't know if this is the right forum but I am planing to open a blog on Blogger. But I want to design it from scratch (which is to write the code on a completely white page). I already know the CSS and HTML (I learned especially for Blogger). The problem is I do not understand some lines of code and I don't know why they are there. In order to be able to fully design my own Blogger blog, I need urdastand how it works. Here is the code:

  

  I am do the lines of average 656-658? And lines 665-667? And so on. Is someone can break itdown for me? I have lear another language programming or something? Would appreciate any help.

  Kind regards.

  Bart

  Bart91 wrote:

  What is "template"? It is written in HTML isn't it?

  A theme determines the appearance/layout of your Blog.  It is not just HTML & CSS.  It is the owner of Blogger code.  Blogger stores your content in a database.  The theme retrieves content from Google's servers.  You must use the code owner of Blogger or your blog will not work.   If it is not properly encoded, I'm pretty sure Blogger system will reject it anyway.  So don't try to customize a theme until you fully understand as Blogger of the encoding scheme.  It is unique.

  Find a free or commercial Blogger theme that you can live with.   It will save you hours of frustration.

  Blogger Business 2016 models

  Free download of 2016 models sensitive blogger

  Blogger Templates 2016 | Blogspot Premium models

  Nancy O.

• The line of code for the change of color in FindChangeByList.txt

  Hello

  I would like to know how the following line of code would look like if I want to change the color of the letters 'u' - to the color red? :

  grep

  {"findWhat:" \u0075 ""}

  {changeTo: 'u', appliedFont: 'Sabondiacritic', fontStyle: "Regular"}

  {caseSensitive:true, includeFootnotes:true, includeMasterPages:true, includeHiddenLayers:true, wholeWord:false}

  Find out all the letter x and replace it with the Arabic word.

  Like this:

  

  Help is appreciated as always!

  With regard to Camille

  Try this,

  {changeTo:"\u", appliedFont:"Sabondiacritic", fontStyle:"Regular", fillColor:"C=15 M=100 Y=1000 K=0"}
  

  but don't know why you use unicode \u0075 in the Grep search... instead, quite simply, you can use "\u".

• Where can I add this line of code?

  I want to start by saying that I know very little about flash... So, I apologize for my ignorance, and if I say words that don't make sense do not hesitate to laugh and shake his head.

  I have the following code for a "clickTAG"

  () MyClickTagButton.addEventListener

  MouseEvent.CLICK,

  function (): void {}

  If (root.loaderInfo.parameters.clickTAG.substr (0,5) == ' http: ' | root.loaderInfo.parameters.clickTAG.substr (0.6) == ' https: ') {}

  navigateToURL)

  URLRequest (root.loaderInfo.parameters.clickTAG) news, "_blank".

  );

  }

  }

  );

  Specifications of the publication say "when a click occurs, call the following line of code: PopupWin.openWindow (root.loaderInfo.parameters.clickTAG, '_blank');"

  
  

  What I need to know, is where will this code? Help, please!
  

  Is the publication, assuming that you build in HTML? Because PopupWin.openWindow is a javascript, as opposed to your AS3 version command. Assuming that it worked from Flash, he would replace this part:

  navigateToURL)

  URLRequest (root.loaderInfo.parameters.clickTAG) news, "_blank".

  );

  to open a window with javascript instead.

• Erratic behavior CBWMS view code with code disappears

  This just started today: behavior seen very erratic code with the code disappears.

  As I am writing code, or by selecting the code, he suddenly disappears. Sometimes portions of code disappears and shows a small section that is stressed.

  If I select a photo in design mode, it can also disappear.

  I tried reinstalling Dreamweaver, deleted the Setup folder, preferences removed, but seems to come back.

  Has anyone seen this type of erratic behavior before?

  Here is an example of the strange underlined text (under 'c'):

  

  If I select an underlined letter and keep typing, it continues the line in mode code like this:

  

  Once this emphasis indicates somewhere, this is the beginning of other erratic behaviors such as images or code disappears suddenly, etc..

  It started to happen after upgrading creative cloud today.

  Try to turn off dictation & speech recognition in your system settings.

  Nancy O.

• You can easily switch to a line of code

  Sorry, I'm not explain it well, but say you have a CSS file with 5000 lines of code and Firebug or Chrome Developer Tools wrote the code you need is on the line 2345, y at - it a shortcut for the line to this line? As in InDesign Cmd/Ctrl-J to go to the page?

  I googled this and some say it's Cmd/Ctrl-G, but is search again.

  I have CS4 Mac.

  See you soon

  I googled this and some say it's Cmd/Ctrl-G, but is search again.

  As a shortcut for PC.

  Try Cmd + on a Mac

  http://www.nobledesktop.com/shortcuts-dreamweavercs4-Mac.html

• How many lines of code in a project?

  Is it possible to know how many lines of code in a project contains FlashBuilder? Somewhere fast for searching in a menu somewhere, a button to press?  Or even with technology the way it is now adays we must resort to open all files and count the lines?

  Here are a few suggestions:

  http://www.EclipseZone.com/Eclipse/forums/t83296.html

• < netui-data: pager > action to extract lines dynamically

  Hello
  
  How can I configure a pager of DataGrid to dynamically extract lines when a user through the paging swap pages?
  I know that I can read all my lines to a collection / array before the rendering of the datagrid control and set the pager to iterate on it like this:
  
  [Controller]
  
  Private list < Ride > wrinkles;
  
  public list < Ride > getRides() {}
  return of the rides;
  }
  
  [Action]
  wrinkles = rideDBControl.getAllRides (); huge amount of data
  ...
  back to the front;
  }
  
  [JSP]
  
  "< div style =" "border-width: 2px;" > < netui-data: dataGrid name = "currentRidesGrid" dataSource = "pageFlow.rides" >
  < netui-data: configurePager pagerFormat = "prevNext" pageSize = "${pageSize}" / >
  < netui-data: header >
  < netui-data: headerCell headerText = "Name" / >
  < netui-data: headerCell headerText = "Description" / >
  < / netui-data: header >
  < netui-data lines: >
  < netui-data: spanCell value = "${container.item.name}" style = "background-color: #f0f0f0; do-size: 14pt; ">
  < / netui-data: spanCell >
  < netui-data: spanCell value = "${container.item.description}" >
  < / netui-data: spanCell >
  < / netui-data lines: >
  < / netui-data: dataGrid > < / div >
  
  But how can I make the pager call a method to update the content of the collection "wrinkles" according to the current selected page and the size of the page? And how do I get the current page and the size of the page inside this method?
  I want to be paginated queries that may return a huge amount of data (1 m + lines), so extract all lines at once is impossible. What I want to do, is spreading the current page and the page size of pager to a method that will update the current collection according to a query such as:
  
  Select X, Y, Z
  Table
  Where the...
  And ROWNUM BETWEEN page * pageSize AND (page + 1) * pageSize
  
  Can someone help a noob?

  For more information, I found the answer by myself.

  To retrieve the rows dynamically, you must change the tag , and include the attributes a pageAction and partialDataSet, for example:

  Within the action of pagination, you can get the current size of the line and page of a PagerModel object. You can then update the data source (don't forget to call the setDataSetSize providing the length of the entire data so that the pager shows the right amount of pages), for example:

  @Jpf.Action (forward = {@Jpf.Forward (name = "success", access = Jpf.NavigateTo.currentPage)})
  {public pagination() before
  DataGridStateFactory dataGridStateFactory = DataGridStateFactory
  .getInstance (getRequest ());
  Gets the pagerModel for the grid object
  PagerModel pagerModel = dataGridStateFactory.getDataGridState)
  "currentRidesGrid") .getPagerModel ();
  => Code to get the size of any data source<>
  pagerModel.setDataSetSize (dataSourceSize);
            
  Get the first line and the model page size
  int firstRow = pagerModel.getRow ();
  int pageSize = pagerModel.getPageSize ();
            
  => Code to extract the rows to display<>
  wrinkles = pageRides;
            
  Forward, forward = new Forward ("success");
  back to the front;
  }

  I hope this helps.

  See you soon

• That's why when I press the button to increase volume on my pc, I suddenly a developer kit that broadcasts the line of code on my computer? I'm really confused

  have firefox open a strange thing happens when I increase the volume on my computer, the high and the low volume are the F11 and F12 keys if I press volume down on my toolbar and albums completely disappear? If I press volume up I suddenly a toolbar developer appear at the bottom of my screen streaming lines of code for what im page currently on

  F12 is the default key to open the Toolbox of the integrated developer same as Ctrl + Shift + I

• We could not verify your address. We could not pair your zip code with your state. Please see the bulletin.

  How to solve this "we couldn't verify your address. We could not pair your zip code with your state. Please review. » ?

  Well, the obvious answer is to make sure that the zip code is valid for the State you entered.