< netui-data: pager > action to extract lines dynamically

Similar Questions

• Fire of action first and then dynamic javascript

  Hello

  I use Oracle Apex 4.1.

  In one of my fields of data in reports, there are a few fields with hyperlinks.

  Ex: I report and one of the field shows 'Enter Code', so when the user clicks on 'Enter the Codes' URL it triggers a javascript that sets the hidden item-specific value and opens a modal form to enter the codes.

  When the form opens, if there is no value for the codes, I need to show the codes in the form so I want to write a dynamic action that sets the values once the form opens.

  My requirement is:

  When you click on a link, call javascript set on the page and then call a dynamic action.

  I need to call javascript from the url that I need to set some parameters is passed to javascript.

  Hello

  I found something, what would be interesting to launch dynamic javascript actions.

  But make sure that you do not change the order of dynamic actions.

  Make a call to it from your javascript code

  Apex.da.actions ($("#P5_HID_TEST"), apex.da.gEventList [1], "change", null);

  actions : function(pSelector, pEvent, pBrowserEvent, pData)

• Error: 0xc000012f and the KERNEL DATA PAGE FAULT

  My son has a laptop of game.  Since last week, he experienced extreme problems.  A constant if the following errors: 0xc000012f and the KERNEL DATA PAGE FAULT.  Although I'm not technologically savvy, I tried the obvious in running virus scan and visiting different communities for troubleshooting tips.  When you run the antivirus (paid service) analysis, the system hangs and the system restarts.  I attended ASUS website in the hope of getting more advice than to have to provide access to the laptop of my son to a technician who gave me some insurance for the better part of 45 minutes that he help and troubleshooting problems.  He highlighted a very detailed chart of downtown action (reliable?), which looked pretty serious.  Suffice it to say, the conversation ended when he asked a one-time fixed fee of $200.  When I refused, he went to stop everything.  I would simply like to take any action that will further damage the laptop of my son. I paid $3K for this system.  Is someone can you please help me solve these problems?  I was going to buy a registry cleaner but was informed in an online community chat room not to do so that these products are not reliable.  Thank you all in advance for your review and taking the time to help me.

  Original title: need assistance immediately please.

   We need the log files themselves (called a DMP files) because they contain the only record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.

  
  

  
  

  Please follow our instructions to find and download the files, we need to help you fix your computer. They can be found here

  If you have any questions regarding the procedure, please ask

  
  

  I find the files DMP prayed and tried their zip.  I received the following: file not found or no read permission.

  I took it to a repair shop for yesterday I had to argue that these issues were well beyond my skill level.  The owner of the store insisted that the 'hard drive' was "fried".  It was agreed to replace the necessary parts (gave me a "Crucial - M4 Solid State Drive - 128 GB), this is the info on the box, to replace my 750Go son.  He said that, even if was less "room" it would "fly".  The original price was $ 200 and climbing!  Give me the question my faith in humanity at this time.  Is not relevant to the prey on someones lack of knowledge.  You and the other hand, all those who try to make a difference... who are trying to help is welcomed.  I wish offered troubleshooting would come to maturity.  Nonetheless, I humbly thank you for your support and follow-up in this case.

  I took it to a repair shop for yesterday I had to argue that these issues were well beyond my skill level.  The owner of the store insisted that the "hard drive"was"French fries".»  It was agreed to replace the necessary parts (gave me a "Crucial - M4 Solid State Drive - 128 GB - INFORMATION ON LISTED), to replace my 750Go son.  He said that even if it was less "room" it would "fly".  The original quoite was $ 200 and climbing! Give me the question my faith in humanity at this time.  Seems very inappropriate to prey on someones lcak of knowledge.  You on the other hand and those who try to make a difference... who are trying to help, should be commended.  I wish offered troubleshooting would come to maturity.  Nonetheless, I humbly thank you for your support and follow-up in this case.

• When I click on Outlook Express I get a blank page with (work in line/connection in the lower right corner. Nothing happens.

  How to get my Outlook Express to work

  When I click on Outlook Express I get a blank page with (work in line/connection in the lower right corner. Nothing happens.

  Folders.dbx is probably damaged.
   
  In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.
   
  The path to the message will be very similar to this:
   
  C:\Documents and Settings\Your User of utilisateur\Local Settings\Application Data\Identities\ {long string of letters & numbers} \Microsoft\Outlook Express
   
  With OE closed, find the Folders.dbx file and delete it.  Another will be created automatically when you open OE.
   
  Note these possible side effects:
   
  When you re - start OE, it will build a new index of all *.dbx files it can read and create a new Folders.dbx. However, understand that you will lose the mail directory structure and message rules will probably have to be edited.

• first non-visible Page actions inside TabbedPane

  Hello

  My application use TabbedPane in main.qml, and the content of each tab is a Page (from qml file).

  hand. QML:

  TabbedPane {
      id: tabbedPane
      showTabsOnActionBar: false
  
      tabs: [
  
          Tab {
              title: "First Tab"
              content: firstPageDef.createObject()
          },
          Tab {
              title: "Second Tab"
              content: secondPageDef.createObject()
          }
      ]
  
      attachedObjects: [
          ComponentDefinition {
              id: firstPageDef
              source: "firstpage.qml"
          },
  
          ComponentDefinition {
              id: secondPageDef
              source: "secondpage.qml"
          }
      ]
  
  }
  

  FirstPage.QML

  Page {
      actions: [
          ActionItem {
              title: "action 1"
              ActionBar.placement: ActionBarPlacement.OnBar
          }
      ]
      Container {
  
      }
  }
  

  Secondpage.QML

  Page {
      actions: [
          ActionItem {
              title: "action 2"
              ActionBar.placement: ActionBarPlacement.OnBar
          }
      ]
      Container {
  
      }
  }
  

  When it starts, it will show firstpage.qml, but action "action 1" is not displayed. But when I change the "Second tab" tab, the action on secondpage ("action 2") appears. Go back to the 'first' tab and the action "Act 1" is visible.

  Why is this happening? Please share your ideas

  Thank you

  The workaround solution you are using is not good. If you want dynamic tabs, then, it is the right way

  Change your main.qml to this

  TabbedPane {
      id: tabbedPane
      showTabsOnActionBar: false
  
      tabs: [
  
          Tab {
              title: "First Tab"
              delegate: Delegate {
                  source: "firstpage.qml"
              }
              delegateActivationPolicy: TabDelegateActivationPolicy.ActivateImmediately
          },
          Tab {
              title: "Second Tab"
              delegate: Delegate {
                  source: "secondpage.qml"
              }
              delegateActivationPolicy: TabDelegateActivationPolicy.ActivateWhenSelected
          }
      ]
  }
  

  and for more information, read this

  http://developer.BlackBerry.com/native/documentation/Cascades/UI/navigation/multiple_screens_tabs.ht...

• NETUI-data: Repeater for haspmap?

  Could someone advise me how to navigate through a hash table using netui repeater to display keys and values on the jsp page.
  
  Here is my code:

  HashMap Structure:
  
  Key                          Value
  Question Label          List<AnswerBean>
  
  JSP Code:
  
  <netui-data:repeater dataSource="pageFlow.surveyForm.surveyAnswers">   // this returns the Map<QuestionText, List<AnswerBean>> , Answers contains answer Id and answer Text.
      <netui-data:repeaterItem>
             <netui:span value="${container.item}"/> //display the question text
              <netui-data:repeater dataSource=""> // here i want to iterate through the values (List<AnswerBean>)
                     <netui-data:repeaterItem>
                              <netui:span value=""/> // here i want to display the answer (answerBean.answerText)
                     </netui-data:repeaterItem>
              </netui-data:repeater>
      </netui-data:repeaterItem>
  </netui-data:repeater>

  Appreciate your help.
  
  Thank you

  Container.Container.Item == Map.Entry (i.e. the parent object)
  On what object is surveyQuestionLabel?
  You probably mean container.container.item.key.surveyQuestionLabel (on the assumption in the question text object)
  OR if it is AnswerBean then container.item.surveyQuestionLabel

  concerning
  Deepak

• Page instead of 3 lines scroll wheel

  When I scroll my mouse wheel downwards or upwards, of page instead of 3 lines (like Win7). What happens only in 39.0a1 every night (2015-02-24), and I can not find where to change the setting and frankly don't know how he has changed in the first place. Other applications only 3 lines, as they are supposed to. I was just scrolling through my email and BOOM he started to go page. I restarted and tried to hold each combination of CTRL/ALT/SHIFT and scrolling of thought which may help. Any ideas?

  Hi greystoker, every night is an unstable development branch where things are required to break or go wrong from time to time.
  what you describe looks like bug #1136177 which will be dealt with in one of the next updates.

• All my data have doubled and the lines are slightly compensation and overlapping. Unusable.

  All my data have doubled and the lines are slightly compensation and overlapping. Unusable. How to restore the distorted view course content?

  Hello Arnold,.

  A screenshot of the upper-left corner of your document could help the issue. Include as much as in the example below.

  If this section of the table does not display data "doubled and shifted", provide a second screenshot of a section of the same size, showing a sample of the data in question.

  Kind regards

  Barry

• Can I add a page in a tab control dynamically

  Hello

  is it possible to add a page in a tab control dynamically

  Thank you

  Jay

  Hi Jay,.

  don't you can´t, because it s an enum. But you can first create all the pages you need and hide not used.

  It will be useful.

  Mike

• "Message from the Web Page" "out of Memory Line: 28"

  I get a pop up that says "Message from Web Page" "out of Memory Line: 28" what does this mean and how do I?

  Thank you, mimi61954

  See if the information below helps you solve the problem/s you have with Internet Explorer:

  http://support.Microsoft.com/default.aspx/KB/936213/?p=1

  "How to optimize Internet Explorer"

  Configuration in Windows Internet Explorer 7 and Windows Internet Explorer 8 settings can cause one or more of the following problems:

  ·     You experience performance issues in Internet Explorer.

  ·     You receive an error message in Internet Explorer. For example, you receive a message error "Internet Explorer cannot display the webpage".

  ·     Internet Explorer stops responding.

  This article describes how optimize or reset Internet Explorer in Windows Vista to solve these problems.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/936215

  "How to solve the problems of Internet Explorer in Windows Vista and Windows XP"

  This article explains how to solve any problems that you may experience when you use Windows Internet Explorer 7 or Windows Internet Explorer 8 on a computer that is running Windows Vista.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/936214/

  "How to solve compatibility problems that affect Internet Explorer 7 in Windows Vista"

  This article describes how to troubleshoot software compatibility affecting Windows Internet Explorer 7. To help determine which program may be the cause of the problem, you can do the following:

  1 use the mode safe mode with networking

  2. perform a clean boot

  3. use another user account

  4 scan your computer against viruses and spyware

  5. run Internet Explorer 7 in "no Add-ons" mode

  Hope the above helps.

  See you soon.

  Mick Murphy - Microsoft partner

• Open a PDF file to a specific page of the command line

  I want to open a PDF stored locally to a specific page of the command line. I've seen examples of access files based on the web using http and the #page = parameter, but it doesn't seem to work for a file stored on my local disk.  I want to be able to use VBA in MS Access to control the opening page.

  Hi cfwoodbury,

  When you open a PDF document from a command shell, you can pass parameters to the command to open the switch /A with the following syntax:

  /A "=" ""

  For example:

  Acrobat.exe/a "zoom = 1000" "C:\example.pdf"

  Kind regards

  Rave

• External text of county line dynamic text field

  Hello friends,

  I've done a scroll bar, , but now I have a problem, need to read the number of lines dynamic text field and If it is greater than x show the scrollbar and hide if is less.

  Like this:

  if(Text.instance>7) {}

  ScrollBar._visible = true;

  }

  else {}

  ScrollBar._visible = false;

  }

  My problem is How do I count the total of lines of dynamic text field after load an external text.

  then either:

  1. what you see is not aplicationScroll or

  2. you have more than 1 scrollbar named aplicationScroll or

  3. you have the code runs also change the aplicationScroll to true _visible property.

  Use the movie Explorer to track down your error.

• NETUI data Repeater?

  Hello
  
  I have a collateralList and collateralId in a form. How to read the collateralId during the iteration of the collateralList?.
  

  <netui-data:repeater dataSource="pageFlow.collateralForm.collaterals">   // returns the collection of collateralBean
     <netui-data:repeaterItem>
       <netui:radioButtonGroup dataSource="container.item.collateralOption">
         <netui-data:repeater dataSource="container.item.collateralList">
        <netui-data:repeaterItem>
                         //trying to read collateralId in the below code.
           <netui:radioButtonOption onClick="enableComment('${container.item}','${pageFlow.collateralForm.collateral[???].collateralId}');" value="${container.item}">
            <netui:label tagId="textLabel" value="${container.item}" />
          </netui:radioButtonOption>
        </netui-data:repeaterItem>
       </netui-data:repeater>
        </netui:radioButtonGroup>
         <c:if test="${container.item.textArea=='true'}">
           <netui:textArea tagId="${container.item.collateralId}" dataSource="container.item.collateralComment" disabled="true"/>
        </c:if>
     </netui-data:repeaterItem>
  </netui-data:repeater>
  
  function enableComment(label,collateralId){
       if(label=='Other'){
            document.getElementById(collateralId).enabled="true";
       }
       
  }

  Hello
  If you print directly in the outside loop itself, do you see the correct value? If both are null, then the problem lies in the structure of your data data

  concerning
  Deepak

• The Spry XML data Pages continue to increase the memory IE7 use

  Hello
  
  I am facing a recent issue when I built a data page spry with Dreamweaver cs3 and when you test the page using IE7 displays the data and after that I'm not doing something else opens the Manager of Windows taskbar and found shocking that the tab for iexplore.exe guard incrementing memory usage and as soon as I navigate to another page in the Web site or return to the previous state of the history by clicking aft IE7 button, it stops incrementing and shows a number of static Ko. It is not increment more.
  
  Please help me, I enclose the coding as below. I kept this code in my project directory web tomcat because it is only used by a Web server running and gives an error if security policy test it offline on the local computer.
  
  Thanks in advance.
  
  Anmol Saraf

  "mranmolsaraf" wrote in message
  News:f4oidv$k6f$1@forums. Macromedia.com...
  > ds1 var = new Spry.Data.XMLDataSet ("menubarXML.xml",
  > "specials/menu_item" {distinctOnLoad: true, useCache:false, loadInterval:100});}

  You reload the XML file every 100 milliseconds, I'm not surprised
  the memory usage increases...

  ----------------------------
  Massimo Foti, programmer web-rental
  Tools for ColdFusion and Dreamweaver developers:
  http://www.massimocorner.com
  ----------------------------

• More than one Page objects of value with dynamic action parameter

  Hello

  How to set the values of the two elements of the page based on another page, article in dynamic action IE

  -variable value tr_type is set using the function get_type

  -passing the p1_code parameter

  TR_TYPE; = GET_TYPE (P1_CODE);

  If TR_TYPE = "DR" THEN

  P1_DR: = P1_AMT;

  ON THE OTHER

  P1_CR: = P1_AMT;

  END IF;

  -If I write the function get_type with Exp of PL/SQL of TYPE 'SET', it triggers the error on the use of the service.

  -If I put body of the PL/SQL TYPE of function 'SET', the page displays error unhandled expception.

  How can I achieve this using dynamic action.

  Hi, IK,.

  Can you please quote the u of changes/amendments made to the code, I am unable to find it.

  Included missing: for element names.

  --value variable tr_type is set using function get_type
  --passing p1_code parameter
  TR_TYPE:=GET_TYPE(:P1_CODE); 
  
  if TR_TYPE='DR' THEN
  :P1_DR:=:P1_AMT;
  ELSE
  :P1_CR:=:P1_AMT;
  END IF;  
  

  Here is my scenario with code.

  I have a form with 4 elements (account (P1_CODE), quantity (P1_AMT), DR (P1_DR, hidden), CR (P1_CR, hidden), I am writing a dynamic action on P1_AMT (change) of the code)

  DECLARE

  TR_TYPE char (2);

  BEGIN

  -calling a function "GET_TYPE.

  -passing the P1_CODE parameter

  TR_TYPE; = GET_TYPE (P1_CODE);

  If TR_TYPE = "DR" THEN

  P1_DR: = P1_AMT;

  ON THE OTHER

  P1_CR: = P1_AMT;

  end if;

  end;

  Again, we know not not how you want to call a dynamic action,.

  assuming that on the evolution of the account (P1_CODE), the function call GET_TYPE(:P1_CODE) to retrieve the type of transaction,

  on the basis of the transaction that you want to set the amount of specific element.

  on the change of point P1_code

  Action: execute the PL/SQL code

  Parameters

  DECLARE
  TR_TYPE  char(2);
  BEGIN
  --calling a function "GET_TYPE"
  --passing parameter P1_CODE
  TR_TYPE := GET_TYPE(:P1_CODE);
  if TR_TYPE='DR' THEN
  :P1_DR:=:P1_AMT;
  ELSE
  :P1_CR:=:P1_AMT;
  end if;
  end;
  

  page elements to present - P1_CODE, P1_AMT

  page items to return - P1_DR, P1_CR

  Check the screenshot

  

  There are other ways to set the values using dynamic action, try the above

  Kind regards

  Jitendra