Extracts are not what I expected... Any ideas to achieve the desired results?

Similar Questions

• In Vista, I am uable to assign Office Word as default program for .doc files. Microsoft Word is not an option. Any ideas?

  In Vista, I am uable to assign Office Word as default program for .doc files.  Microsoft Word is not an option.  Any ideas?

  Beginning

  Default programs

  Associate a file type or Protocol with a program

  Highlite .doc and select "change agenda."

  The program recommended in does not (Adobe Reader in this case)

  Other programs shown don't include microsoft word

  Have Vista SP2

  Have Microsoft Office Standard 2007

  Hello

  1. are you not able to set Microsoft word as your default program?
  2. don't you make changes to the computer before the show?

  Try the following steps to configure word as the default application.

  (a) with the right button on a .doc file and select open with. If a menu appears, select Choose default program.

  (b) If Word 2010 does not here, click on the Browse button. Navigate to the C:\Program Files\Microsoft Office\Office12 directory.

  (c) search for and select the winword.exe file.

  (d) in both cases, check the always use the selected program to open this type of file.

  (e) click OK.

  Use the links below to set default programs in Windows.

  http://Windows.Microsoft.com/en-us/Windows7/change-the-program-that-opens-a-type-of-file

  http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default

• When I click on the menu option 'Open Site' he does not what to expect, is rather shows the desktop on my iMac.

  When I click on the menu option 'Open Site' he does not what to expect, is rather shows the desktop on my iMac.

  What you see is exactly the way it should work. Open the site your Finder window opens, so you can access the .muse file you want to open. Recently opened (just below it) will show the list of sites you have worked on lately. I don't know what else await you.

  I should probably see a list of site temp I want to open or DELETE?

  No, Muse or any other program besides will not open a file that you do not select to open. To remove a site simply open Finder on Mac go to the location of the file and delete it in one of the many ways that a Mac allows you to do.

• I changed my setting in private browsing and now does not open firefox. Any ideas?

  I changed my setting in private browsing and now does not open firefox. Any ideas?

  Never mind. After about an hour of not opening, I clicked on the icon and its opening. Maybe someone can explain that.

• A red circle that appears when you miss a phone call will not go away? Any ideas?

  A red circle that appears when you miss a phone call will not go away? Any ideas?

  Hello

  If I am not mistaken, you see a red circle when you miss a phone call that you would like to go. If this is the case, you can simply open the app phone on your iPhone and wait 10 seconds, and then return to your home screen. In doing so, the iPhone think that you have viewed your missed calls, once you see the red circles will disappear. If you're still having problems, this can be a problem and a simple reboot will help. Here's how you can restart your iPhone:

  • Press and hold the sleep/wake button until the Red slider appears
  • Drag the slider to turn off your iPhone
  • Once the iPhone is off, press and hold the sleep/wake button until the Apple logo appears.

  I hope this helps.

• A videoagrapher sent me to edit MOV files. When I try to read up on the timeline just stuck... can not play at all. any idea?...

  A videoagrapher sent me to edit MOV files. When I try to read up on the timeline just stuck... can not play at all. any idea?...

  Hi Gilad,

  It seems more an audio problem for me.

  Please select all the clips on the timeline, right-click and select 'Remove' to separate the audio from the videos.

  Once done select Audio only in the timeline and right click to select "Render and replace. Once done, save and close the project.

  Try reading to check if it works.

  You can also try to export an XML file i.e tab of project selection.

  Go to file > export > Final Cut Pro XML

  After creating a new project > import the XML file, and then open the sequence to check.

  Vinay

• How do I not what SATA driver do I need for the Satellite L300 - 03C

  How do I not what SATA driver do I need for the Satellite L300 - 03C so I can make nlite

  Hello

  Your laptop seems to be a Satellite L300 - 03C PSLB8C-03C01X.
  As already indicated on your first visit to thread the Toshiba Canada page and choose this model of laptop on the driver page.
  http://209.167.114.38/support/download/ln_bymodel.asp

  Then download the Intel Matrix Storage Manager (SATA) - image of floppy drive. It of for Vista, but the files in this package should work with Win XP too.
  Include these files using nLite to create the new disk Win XP that contains SATA drivers.

  Finally use this disk to start.

• My panels are not displayed when I click on it in the menu drop-down windows. The box appears but not the Panel. Can anyone help?

  My panels are not displayed when I click on it in the menu drop-down windows. The box appears but not the Panel. Can anyone help?

  Try to reset your preferences using Cmd (LTRC) - Opt (Alt) - move when restart you the version of AI. Did you once two monitors?

• I have the trial version but my cloud libraries are not displayed. Is this a limitation of the trial version?

  I have the trial version but my cloud libraries are not displayed. Is this a limitation of the trial version?

  Hi Amy,

  Can you please let me know about the AI CC version on your machines?

  WIN: Menu I help > about Illustrator

  MAC: Menu of AI Illustrator > about Illustrator

  The library Panel is shipped in The AI CC 20141 release. If the AI CC version isn't AI CC 20141, that please update HAVE CC 2014 using the creative application of cloud (quit and relaunch the CC app).

  Thank you best regards &,.

  Rambour

• Why "bgp bestpath missing-as-worst med" command does not produce the desired result?

  Can dear all, someone tell me why "bgp bestpath missing-as-worst med" command does not produce the desired result?
  And I use GNS3 to this practice, the IOS Version: 12.4 (3)
  TKS...

  Back to the beginning:
  192.168.23.0/24 192.168.12.0/24
  RA(F0/0)-(f0/0) RB (s2/0) - RC (s2/0)
  [AS1]                    [AS2]                    [AS3]

  Configuration:
  * RA *:
  A #do sh run (config - router). b r b
  router bgp 1
  no synchronization
  The log-neighbor BGP-changes
  1.1.1.0 netmask 255.255.255.0
  192.168.12.2 neighbor remote-2
  setmed map of nearby route 192.168.12.2 out
  No Auto-resume

  IP route 1.1.1.0 255.255.255.0 Null0

  setmed allowed 10 route map
  the metric value 20

  * RB *:
  B (config - router) #do sh run | b r b
  router bgp 2
  no synchronization
  BGP always-compare-med
  The log-neighbor BGP-changes
  BGP bestpath missing-as-worst med
  neighbor 192.168.12.1 distance-1
  neighbour 192.168.23.3 distance-3
  No Auto-resume

  * RC *:
  C (config - router) #do sh run | b r b
  router bgp 3
  no synchronization
  The log-neighbor BGP-changes
  1.1.1.0 netmask 255.255.255.0
  neighbour 192.168.23.2 distance-2
  No Auto-resume

  IP route 1.1.1.0 255.255.255.0 Null0

  But when I checked out table RB bgp, as below:

  B (config - router) #do sh ip bgp
  BGP table version is 2, local router ID is 192.168.23.2
  Status codes: deleted, cushioning d s, history of h, * valid, > best, i - internal.
  r SIDE-failure, stale S
  Source codes: i - IGP, e - EGP,? -incomplete
  Network Next Hop path metrics LocPrf weight
  * > 1.1.1.0/24 192.168.23.3 0 0 3 I
  *                          192.168.12.1            20                         0  1 i

  The prefix is assigned a MED of 0, but also the best path value when I use "bgp bestpath missing-as-worst med" in how to configure bgp... :-(

  Please take a look at the discussion on the configuration of drugs to an eBGP neighbor:

  https://supportforums.Cisco.com/thread/343397?TSTART=0

  Note that BGP MED is set to 0 even if the injected BGP route from a connected route.

  The first time I came across this problem sending MED was there in a picture of 5-6 years service provider. Routes were injected into BGP with the command 'network', has been validated by OSPF routes or static to null0. Involuntary consignment of drugs was mess with load balancing between 2 links of our inbound traffic from the same upstream service provider.

  Also note that if a route is learned via iBGP, border router removes MED before the road to advertising for an eBGP peers (i.e. the above comments apply a when a route is injected locally into the border and then router BGP sent to an eBGP peer).

  I don't know what the cause of the problem that you said in your last post. It delivers last for a long time or that it does not change after a while?

  p.s. Sorry, I edited post because I said "iBGP" instead of "eBGP" at some point.

• E10 Campaign vs program Builder - not what I expected?

  We just moved to e10 upward after being on e9 for a looooong time. So forgive me if I'm not seeing things correctly.

  If I get this right, you can't do a little data manipulation in the Web of campaign? For example, if a contact opens an e-mail, update the status of Member of campaign response, change lead status, etc..

  You should always use the program for this generator? So tell me why I use the canvas of campaign? Seriously. Almost every campaign I was running must come out of a program. So now I have 2 entities in Eloqua to maintain?

  How to guide my thinking on that? Are campaigns are basically just a place to park my property such that it allows combined campaign? So it's NOT different team e9?

  Talked to the (very useful as usual) support and hit the support site. The answer is Yes, do any manipulation of data, etc., you must use the program generator. I voted up to the feature request on the ideas, please do the same if you feel same - the idea is called "feature program Builder in E10 campaign canvas."

• I have an iPad 2 and one row of keys do not work. I forced a reboot and it has not corrected it. Any ideas?

  I have an iPad 2 and one row of keys just stopped working.  I tried to force a restart and it has not fixed the problem. Any ideas?

  If you rotate the camera in landscape mode, change the key group that will not work, in correspondence to the East of the screen does not not in portrait mode? If so, then it could very well be a hardware error. If the force restart did not work, your next troubleshooting steps would restore backup, restore to factory. Until you if you want to go too far, or all simply make an appointment at the Apple Store nearest to have the material examined.

• Updates for my PC, they are all safe? How can you tell if they are not what they say?

  I get updates on a regular basis. Of MSFT, Adobe and other companies. How to do that they are legitimate and not masquerade as

  well-known company, you stick with a virus?  The most recent is Jucheck.exe (a Java Update). I looked and it appears to be from a SunMicro. Is it a

  safe to run. What I've read, is that it is important to place in program files, otherwise it may cause trouble.

  So, how to make sure that these updates are really who they say they are?

  Hi Dog_Father,

  'jucheck.exe' is the process of checking Java Update. It is safe to run on the computer. For more information on this subject, you can refer to link: http://bit.ly/12cryow

  If you want that each update that must be installed on the computer must be checked and verified. You can use certificates to protect your personally identifiable information on the Internet and to protect your computer from harmful software.

  To open local security policy, click Start, point to settings, click Control Panel, double-click Administrative Tools, and then double-click local security policy. In the Details pane, double-click on Control Panel: certificate rules of use on Windows executables for Software Restriction policies. To enable certificate rules, click enabled.

  For more information, refer to link: http://bit.ly/WRE4X1 and http://bit.ly/lzDlvb

  By activating this option, you would be affecting the browser to check all the online applications that you run and you might get a lot of pop ups or guest.

  Answer please for more details.

• Out of the object, it is not what I expected.

  I am rewriting a script and I'm having some problems with the release, the partial script is below.

  1. something function {}

  2 $ESXiVersion = $AllESXiHost | Foreach {Select @{N = 'Version of vSphere';} E={ $_. Name}}, @{N = 'Count'; E={ $_. County}}}
  3. $ESXiModel = $AllESXiHost | Model group | Select @{N = 'Server model'; E={ $_. Name}}, County
  $ESXiInfo = new-Object - TypeName PSObject
  $ESXiInfo | Add-Member - MemberType NoteProperty-name ESXihostCount-value ($AllESXiHost) .count
  7. $ESXiInfo | Add-Member - MemberType NoteProperty-name ESXiVersion-value $ESXiVersion
  8. $ESXiInfo | Add-Member - MemberType NoteProperty-name 'Model' - value $ESXiModel
  Write $ESXiInfo. FL

  }

  I tried some things, so the line 2 (goes to line 7) is an experience and does not produce anything, but when I write it as line 3 (goes to line 8), I get the same results.

  When I call the function, line 2 (line 7 out) and 3 (output line 8) show similar to information

  {@{Model server = server;}} Count = 7}, @{model = Proliant Server;} Count = 1}}

  I'm guessing that the output is a hash table, but of course I want the "@ {" removed from the script, but I don't know how.  A colleague suggested I use a foreach statement, but I don't know that I did it incorrectly.  If I register, say line 3 as below:

  $iHost = get-VMHost | model group | Select @{N = 'Server model'; E={ $_. Name}}, County then the output seems well

  I see it's a GroupInfo object... ok, I can go on and on for something simple.  How can I remove the {@{}} my script, so it looks better when released?  Thanks in advance.

  HI: DZ1,

  Sorry for the confusion between you. Please forget this GetEnumerator, you don't have to use it at all. It was my mistake. I don't know why but I thought that's a hash table and you use getenumerator to split large hashtable of unique items... I don't know what I was thinking then. Ah sorry this one.

  Your line

  1. $ESXiVersion = $AllESXiHost | Select @{N = 'Version of vSphere'; E={ $_. Name}}, @{N = 'Count'; E={ $_. County}}

  is wrong, I guess. If you want to get the esxiVersion you should not query the property 'name '. Name is the name of your host esxi as, esx123.local.biz, but it does she hold the version name. To get esxi version you must use the property named 'version' of the vmhost object.

  I don't know what you want to count by this line because:

  $AllESXiHost | Select @{N = 'Version of vSphere'; E={ $_. Name}}, @{N = 'Count'; E={ $_. County}}

  first of all it will not count anything because you're the count() on vmhost object method that isn't a table or something like that type, which could be counted.

  It must be remembered that, in your infrastructure there may be several versions. If you have to do that many heads of charge esxi as many versions as you have in your VC.

  This is why I have proposed to put as many version properties as they are.

  If this MAIN BIG object for statistics will hold a property for counting version 3, version 4 and version 5 for example. In order to count the individual versions, you have to divide your esxi by these versions boxes

  Then

  $AllESXiHost | Group-object - property

  consolidate all hosts of esxi by their version number, you will receive as many objects as it has versions

  You should see something similar to this

  Name of County
  ----- ----
  1 3.5.0
  2 4.0.0
  3 4.1.0

  So, we have identified 1 host with version 3.5, 2 guests with version 4 and 3 guests with version 4.1

  So everything depends now how you wish to put this information inside your statistics collection of $esxiinfo objects

  I have proposed to put 3 different properties, or having 1 House containing an arry.

  IF you want to have the simple text, and you do not want to calculate it later anyway, you can just make 1 chain and join these chains in a big 1.

  $versions = $AllESXiHost | Group-object - property Version | Select Count, name
  $versions

  Name of County
  ----- ----
  3 4.0.0
  7 3.5.0
  6 4.1.0'

  I don't know how many versions you will receive. But since you can have mulitple versions I guess you want to distinguish them.

  So I thought you want to learn to add as many properties of the versions in the newly created object.

  2. $ESXiInfo = New-Object - TypeName PSObject

  It's ok

  3. $ESXiInfo | Add-Member - MemberType NoteProperty-name of the Version value ($ESXiVersion |) Group - Version) .getEnumerator (of property). Select Count, 'vSphere Version' 0

  We will add properties to ESXiInfo now, we will add AS MANY PROPERTIES as NEEDED.

  Therefore, add 3 properties

  property Version4.0.0,

  property Version4.10.0,

  Version3.5.0 property

  So instead of the line that we should use

  $versionss | % {Add-Member - InputObject $ESXiInfo - MemberType NoteProperty-Name "Version$ ($_.)"} Name)"- value of $_. County}

  For each version, that we found, we will add new Member to our object of $ESXiInfo. This command will automatically add as many versions they are.

  Your ESXiInfo object will now have new properties

  # 23:01:55 > $ESXiInfo | GM

  TypeName: System.Management.Automation.PSCustomObject

  Name MemberType definition
  ----         ----------   ----------
  Equals method Boolean Equals (System.Object, obj)
  GetHashCode method int GetHashCode()
  Type of the method GetType GetType()
  String the ToString ToString() method
  Version3.5.0 NoteProperty System.Int32 Version3.5.0 = 7
  Version4.0.0 NoteProperty System.Int32 Version4.0.0 = 3
  Version4.1.0 NoteProperty System.Int32 Version4.1.0 = 2

  So you can get

  # 23:02:55 > $ESXiInfo. 'Version3.5.0 '.
  7

  I think that I have explained your 3 lines.

  Now if you really want to have an additional property only 1 for versions, you can do it like that.

  line 1

  $AllESXiHost | Group-object - property Version | select count, name | % {[table] $versionss2 += 'Version $($_.)} (Name) = $($_.) County)"}

  This line will create the variable $versionss2, which will be used to maintain information about the versions of esxi.

  Lets first get the versions and their count but store this information in a simple table.

  I # 23:05:20 > $versionss2
  Version 4.0.0 = 3
  Version 3.5.0 = 7
  Version 4.1.0 = 2

  OK, we have 3 rows in our table, but you want to have only 1 property for versions so join us just these lines.

  So we call add-member only ONCE, this time:

  Add-Member - InputObject $ESXiInfo - MemberType NoteProperty-Name 'Esxi Versions' - value [string]: join(',',$versionss2)

  We are joinng all loose our table with versions with comma.

  Take a look how your object will now look like:

  # 23:10:55 > $ESXiInfo | FT - AutoSize

  Version4.0.0 Version3.5.0 Version4.1.0 Esxi versions
  ------------ ------------ ------------ -------------
  3 7 122 version 4.0.0 = 3, Version 3.5.0 = 7, Version 4.1.0 = 2

  first 3 columns were the first method, fourth colum is the new approach. So if we would not include even the former approach, it would look like this

  ESXi versions
  -------------
  Version 4.0.0 = 3, Version 3.5.0 = 7, Version 4.1.0 = 2

  And for the model, you do exactly the same thing, but instead measure the version property, you need to measure the model.

  I hope that is more clear.

  Greg

• formItem direction: vertical, does not work... any idea why?

  Hey guys... im basically trying to place my text box just below my formItem label and after some research, I discovered that I just need to add the formItem layout = "vertical"...

  the code I have is

       for each(var item:Object in menuItems){
            var formItem:FormItem = new FormItem();
            for each(var category:Object in categories){
                 if(item.Type == category.Id){
                      formItem.label = category.DisplayName;
                      formItem.setStyle("labelStyleName", "formItemLabelLeft");
       //----------->          formItem.direction = "vertical";
  
                 }
            }
            var textArea:TextArea = new TextArea();
            textArea.text = item.Description;
            textArea.height = 50;
            formItem.addElement(textArea);
            menuForm.addChild(formItem);
       }
  

  any ideas?

  Not sure, I understand the need to use a container of form, but if you want an easy solution, try to use a FormHeading to show labels instead of set the FormItem label:

  
  http://ns.Adobe.com/MXML/2009.
  xmlns:s = "library://ns.adobe.com/flex/spark".
  xmlns:MX = "library://ns.adobe.com/flex/mx" >
     
     
         
         
             
             
         
         
         
             
             
         
     
     
  

  Peter