Extrem low volume in my car audio system

Similar Questions

• Latest version of ios 9.2.1 is not compatible with my car audio system

  Hello

  Since I upgraded my iPhone 5 ios to 9.2.1 my touchscreen on the audio system fly of my Toyota Prius no more answers when my iPhone 5 is connected to the USB port.  Toyota told me that I must try to downgrade to the previous version of the ios.  It's very annoying.

  Can someone tell me what to do and how to solve this problem.

  Thanks in advance for any help.

  Diane

  You can not downgrade iOS, Apple does not support. I would check with Toyota once again to see if they have an upgrade of your system. Only they can tell you if they support iOS 9.2.1 for their system.

• Bluetooth is not automatically pair with car audio system

  I'm having a problem with the connection automatically to my car handsfree system, I go to bluetooth settings each time so that it can connect. Manually the connection works well but is very tedious to long-term and not how bluetooth should work to my knowledge.

  Anyone know if this a bug or a feature I'm missing?

  The car is a Subaru Impreza in 2013.

  So I understand that eventually... Basically, there are two ways to remove the previous devices (on the side of the car), we must simply select the device, then delete and the other is to fully wipe ranging from installation-> initialize. Apparently the system just needs a fresh start...

  Thank you!

• Too low volume of the microphone

  I just bought a new Toshiba Satellite L500D, with Windows 7, and I'm having a problem with the microphone volume, in this sound recording is barely audible.

  I followed all the steps suggested on this topic on the forum: http://social.answers.microsoft.com/Forums/en/w7music/thread/06582922-0014-4dac-9f74-b63f143fbb8e... .but nothing fixed it.

  It's a built-in microphone and audio driver is Realtek.  I did a driver update check and it integrates the latest version.  I all set to maximum microphone volume settings and tried to test records Skype and sound recorder for Windows.  They record, but it is extremely low volume, even if I'm leaning closer to the microphone and speak loudly.  Different recipients of Skype call could barely hear me.  The only thing that saves the high voice is when I run a finger over matte plastic of the monitor frame - which saves super hard for some reason any.

  I welcome suggestions as soon as possible.  I need my microphone to get the work done!

  I hope that the people at Microsoft can remedy the situation as soon as possible, because it is crucial to set!

  I had this problem for a few weeks, I recently read a forum post saying uncheck the: allow applications to take exclusive control of the device:

  Well, I found this setting and changed a few others and I think that he has fixed

  I went through the control panel > hardware and sound > manage Audio devices to reach the acoustic Panel.

  I selected reading > Speakers > improvements and made sure that everything was unchecked.
  "" I selected reading > Speakers > advanced and unchecked "allow applications to take exclusive control of this device.

  I went to recording > Microphone > listening and insured 'listen to this device' is unchecked.
  I went to levels and assured the Microphone level was 100% and the boost to + 10 dB
  I'm gone into improvements and assured that everything was unchecked.
  "" I then in Advanced and unchecked "allow applications to take exclusive control of this device.

  And finally I went in the Communications of the acoustic Panel tab, changed "when windows detects communications activity" to "do nothing".

• Bluetooth connection problem iPhone - audio system Nissan after upgrade iOS10

  After iOS10.0.2 iOS9 on iPhone upgrade, I got a cordially problem receive calls raise Nissan car audio.

  I can make a call without any problem. Bluetooth connection is stable. I can download address book e.t.c. But I can't receive a call. I see the incoming call on the radio shows. After pressing the button "answer" on the car Audio System, audio between iPhone and Audio streams car breaks down.

  But the cellular connection remains active. I need to rotate the audio output on the screen of the iPhone car for iPhone and back to the car. After that, I can continue my call via the car radio.

  Thanks in advance

  Hello StasV,

  Thank you for using communities Support from Apple. I know having a problem with calls on your iPhone in your car, it's not what you expect. The good news is that these steps will be useful for your problem of phone calls while using the bluetooth in your car. Go to settings > general > accessibility > routing of Audio calls and the value headset/Bluetooth Headset and retest your question.

  Audio routing call - the iPhone user Guide
  Help to connect your iPhone, iPad or iPod touch with your car radio

  See you soon!

• Selection of car audio

  Hi, I have a Sony car stereo, and I would like my next device would still be a Sony. I'm looking for this condition:

  -Multicolor button

  -usb rear (I would like to connect my HDD)

  -available bluetooth (I am very disappointed Pioneer models can manage several bluetooth phones from Sony, including my real Samsung not supported Sony)

  -distance

  All MP3 player:

  -J' wish that the MP3 tags would be shown (also the image cover)

  -perhaps would benefit from support playlists (m3u format)

  -name of the file (full or last file)

  Available device support these features?

  Thank you.

  P. S.

  I'm also a little disappointed App Remote ins't suitable for other OS, Bada, or Linux.

  Can you imagine if App Remote could manage the music files stored on devices, Linux or Windows?

  Or if the customer may management interface own media player?

  Salvation in the shade,

  You can check the WX-GT90BT car audio system which has the Bluetooth with the App Remote Control receiver

  The exclusive App Remote function combines music and apps Smartphone select it from a list of single source that can be displayed safely and directly controlled by your receiver. It comes with the remote RM - X 231.

  http://store.Sony.com...specifications

  If my post answered your question, please mark it as an "accepted Solution".

• Satellite A100-532: the microphone volume is extremely low

  I just bought Satellite A100-532 and I have a problem with the audio input. I can't use the microphone to chat with my friend on msn or even record my voice on the hard drive because the volume is extremely low.

  I tried to turn the volume on the desktop and on the RealTek HD audio Manager, but nothing helped. Microphone works perfectly fine, as I hear myself on the speakers.

  Normally, with my old laptop (M30 series) I could use sound recorder to record the music that I play using Winamp or WinMediaPlayer, but for this new laptop it detects all the sounds at all... just silence.

  Please notify.

  Hello

  You should also check the volume controls in the "Audio & Sound devices" in the Panel.
  In the 'Volume' tab it please go to "Advanced".
  Then a "Volume control" should appear.
  Check if all controls are set at a high level.
  In addition, enter the 'options' and 'properties' and activate all volume controls.
  Also change to "recording" and activate here also all the controls.
  Additional you must check if the "check" is set to high.

  Use the 'Advanced' mic option and play with thrust mic settings.
  I'm sure that you will find the best settings for your mic record

• ATV4 - music at low volume of movies than the rest of the audio

  I saw something strange. When I look at a movie that has music/songs performed by the cast (I.e. A musical, no incidental music or background), the volume of the song down. As soon as the song ends, the volume level returns to normal. Everyone knows this?

  You have enabled to reduce Loud sounds? Are ATV audio settings compatible with your audio system, for example in stereo, 5.1, etc.. ?

• HP G71-340US low volume when audio sound on the highest rate

  Very low volume with sound levels at the highest point, intermittent reception during audio streaming, loud buzz unknown sometimes for unknown causes. I own a hp G71-340US since 4/10... and am these audio problems.  Y at - it an update to fix this problem?

  Hi Sharopa

  Try reinstalling the audio driver...

  Follow these steps:

  1. click on start and then type devmgmt.msc in the start search box and press on enter.
  2. from the list of devices, expand sound, video and game controllers.
  3. right click on the sound card, and then click on uninstall.
  4 restart the computer.

  After restarting the computer, sound card get installed automatically.

  If the problem persists, please upldate the audio driver following the steps mentioned below.

  Install an updated audio driver

• (Mic) audio system automatically set too low - Captivate Win 9/10

  Well, I'm trying to record video demos with Captivate 9 (9.0.1.320) and for some reason any, it puts my audio system (record; microphone input) at age 13, although I always set it to 100. Very annoying, because sound levels are so quiet during playback I can't even hear with my headphones turned up 100. I'm not using the auto calibrate.

  What I'm missing here?

  Thank you

  Edit: I should also add that I tried self-calibration, but audio is still set to 13. I even turned off the 'exclusive' modes in the system microphone settings.

  Figured it out. The preamp volume is a.125 (~ 13%) by default. Changed to 1.0 and all is good.

  Don't know why self-calibration did not work well.

• The 8.1 Windows USB microphone volume is extremely low

  I have a Samson C01U USB microphone. It's a plug-and-play microphone. There is no driver for it. There is no firmware for it. You just plug in, and it works.

  This microphone has always worked perfectly. When I used Windows 7, I put the volume of it at about 40-50% and everything seemed crisp, clear and strong. On Windows 8, it's incomprehensible unless I put the volume to 90%, but even at this moment, he is not strong enough. Providing 100% results in a lot of noise in the background.

  This is not the first time, someone raised this issue because it is very common to all individuals with a plug-and-play USB microphone:

  http://www.overclock.NET/t/1323451/Windows-8-mic-issue

  http://social.technet.Microsoft.com/forums/Windows/en-us/2da97f80-f58b-4635-ACBF-9dd7292ed752/microphone-very-low-volume?Forum=w8itprohardware

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-hardware/low-USB-microphone-recording-volume-AT2020/9528f797-65c8-4033-A4D6-39995cd0d074

  Has there never been a fix for this problem?

  Hello

  Thanks for the reply.

  As you mentioned that you have checked the matter with another micro but you still face this problem. We already tried to uninstall and reinstall the drivers. I suspect that this problem is a hardware problem. Check the issue with a local technician.

• low volume on iphone call 6

  Dear Sir

  I own my iPhone 6 last year and she has completed the warranty

  While.on is am.adjust too low volume level and also on request your Apple supports.

  What to do please help me

  Hi, this may help.

  Increase the volume

  While you are online, the volume with the volume buttons. Make sure that you see the on-screen volume indicator when you press the volume buttons.

  Check the connections

  If your iPhone is connected to a headset, you will not be able to hear through the receiver using speaker or the iPhone. Follow these steps, after each.

  1. Make sure you have nothing plugged into the headphone jack or the dock connector.
  2. Go to settings > Bluetooth and turn Bluetooth off.

  Turn off the receiver

  The receiver of the iPhone will not work properly if it is blocked or dirty. Follow these steps, after each:

  • Make sure that nothing is blocking the receiver, such as a case or a movie.
    If you have a new iPhone, remove the plastic on the front and the rear of the unit.
  • Check the receiver opening to see if it is blocked or dirty. If necessary, clean the receiver opening with a clean brush, dry, soft.
  • While you're online, turn on the speaker. If you still do not hear, then your network or the reception might be the issue. Try calling again later or somewhere else.

  

  Check the receiver

  Follow these steps to see if the problem is with your receiver or your network:

  1. Open the dictaphone application and record an audio clip.
  2. Type in the upper right corner of your screen to switch playback between the speaker and the receiver.
  3. Press on to play the voice memo by the receiver on your device.
  4. If you hear the voice memo and it seems normal (without distortion, crackling or static), there might be a problem with your network or carrier voicemail system. If you still hear no sound good or bad quality, contact The Apple support.

  

  Update and reboot

  1. Restart your iPhone and the test again.
  2. If there is still no good or bad sound quality, update to the latest version of iOS.

  http://support.Apple.com/kb/TS1630

• 15 - ac098tu: low Volume by Mic

  Hello

  I have a huge request concerning the low mic volume by realtek dts sound studio, I can see the mic properties shows low bars when I speak into the microphone through front or through portable computer microphone, but when I uninstall the driver from realtek dts sound studio, it works perfectly with the microphone and have good enough bars to the microphone volume.

  But a little low volume on the speakers for sound.

  When I connect wifi windows 10 it automatically update the sound driver realtek dts, I need help about mic low volume, so teach me how to stop updating the audio driver or get me the solution for a low microphone volume please.

  Thanks and greetings

  Hous

  Hello @LeoManinder,

  Thanks for the quick response!

  I understand that you already exhausted the steps mentioned in the solution I provided in my previous post.  Try the following steps to stop your system to automatically update the Audio driver:

  1. Download the Package of troubleshooting Windows 10 "show or hide updates" (http://download.microsoft.com/download/F/2/2/F22D5FDB-59CD-4275-8C95-1BE17BF70B21/wushowhide.diagcab).
  2. Change the Windows Update Services automatic (delayed start) parameter to the manual.
  • In Control Panel, select administrative tools, and open Services.
  • Go to Windows Update and double-click it to view its properties.
  • Click on stop to stop the service to run.
  • Change the Startup Type to manual, and then click OK.
  3. Run the Windows 10 Troubleshooting Package 'Show or hide updates' and hide for the Audio from Realtek driver updates.  (This will block your system to automatically reinstall or showing updates the driver).
  4. Change back the setting of Windows Update Services to manual automatic (delayed start).
  5. Restart your computer.

  Source: Re: how to solve the problems of Post-Windows 10 upgrade on HP laptops

  I hope this helps.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Kind regards!

• Turbo - Pandora and MP3 too low volume w / Bluetooth

  Hi all

  I hope that the forum can help, I have spent the weekend looking for this and other forums and still can not find a solution to my problem.

  I have a Turbo that I've been using listening to Pandora, IHeartRadio, Google Music and Amazon music player, but also to play MP3 Poweramp and the app Amazon (for local files) and it worked without problem with an accessory Belkin auto Conenct Bluetooth via the aux on the RAV4, and it worked pretty well for the last 2 years (Droid Maxx before the Turbo words)

  This weekend I bought a Hyundai Tucson to 2013 with Bluetooth factory, and while volumes for the phone and for notifications are fine, when I try to play any kind of music, MP3 streaming either stored locally, the volume seems to be half that of other sources. CDs play fine and I burned some MP3 files on a disc and they play very well this way, so it isn't a problem with the MP3 files themselves.

  I read that there are problems with the Turbo, with the Tucson, but I've also read of this same problem happening with other brands of phone and the car if she can't be unique for the Turbo or HYundai, but of something inherent in Android. All I know is that I use my phone as a source of music a little and it's embarrassing.

  Yes, I made sure the volume of BT is set while the device is streaming, the volume of the media is set as high as possible, I uninstalled everything that can affect the volume with the exception of profile of Volume, which I use with Tasker to ensure my phone not to ring too loudly at work (I have a trigger defined for the SSID of the network to the office which uses a setting saved to breast Profile of volume, when not in the office, I have a reverse rule set to use the 'Normal' setting Thinking that maybe that's the problem I checked and it had been set at 10 on a scale of 15 but put at 15 did not improve the situation.

  I tried Volume +, which is supposed to hang on the API and volume boost beyond the normal max level, but this had no effect, either.

  Anyone encountered this, or have ideas or suggestions? (I know that the last update release notes indicate that a change was made to the volume of Bluetooth but a) it does not seem to affect the profile of audio BT and b) it worked well after the update with my Belkin BT accessory.

  I'm very grateful for any help, thank you!

  Matt

  Hello

  I'm no longer Hunt the Turbo as the culprit of this issue, I've now matched my phone with several other vehicles (including another Hyundai, an Elantra 2013) and it has well in other cases... at this stage, it cannot be the vehicle.

  I'll pull the fuse for the audio system see if I can reset by providing sufficient volume, and I am also pursuing a resolution through my dealer, either via some sort of update or replacement of the radio under my warranty Platinum.

  Thank you for your help,

  Matt

• Low volume after installing several different drivers. Can not find the original driver to reverse the effects

  Hello. First of all, thank you for taking the time to read this message. I'll try and add all the valuable information that I can. However, if you would like more information to help solve the problem, please let me know. So a few weeks ago, I noticed that my audio was very distorted (as you know that your laptop does when you work it, the sound the sound). I downloaded the driver HD audio Realtek, made sure it was updated to help with the distortion. Well, then the volume become too low. I continued install audio drivers Realtek HP, remove all devices from realtek (under sound, video, game in Device Manager controller), passing through updates on internet, etc., but nothing works. In addition, I have gone from reading devices (under the volume in the taskbar icon), by selecting My speakers, go to the properties and selecting improvements and selecting "Loudness Equalizer." So far, which helped a bit. My volume is now 100% and it looks like he did when he was 20% (when there is no problems).

  Unfortunately, I do not know how long this problem has persisted, and I don't think that there is a restore point before that time to try to reverse the effects. Is it possible that I can find the original driver delivered with this laptop? Currently, I went to Device Manager > Sound, Video, game controller, Realtek HD Audio, update > Browse > let me pick > choose the driver earlier.

  Any advice would really be welcome

  Hi @kendrat0,

  Welcome to the Forums of HP's Support. It's a good place to find the help you need, other users, HP experts and other support staff. Thank you for sharing the details of the problem. I want to help you.

  If I understand correctly the audio quality is lower than expected and need a solution.

  (Correct me if I'm wrong, and I thank you for the details)

  Could you please provide me with the product number of the PC? If you don't know how to find this information, please click here for more information.

  I have a few steps, you can perform to resolve the issue: remove audio drivers & reinstall the original drivers update Audio drivers on the official website of HP for windows 10 (click on the changes on the top to switch between the BONES).

  Increase the volume on the playback device settings after you set your speaker as the default device. For more steps, follow a similar post on the HP Forums: click here

  Perform a hard reset

  * Reset the BIOS default

  * Run the test Audio of Diagnostics of material for the PC HP (UEFI)

  * Update the BIOS

  * Reset your computer

  Perform a recovery of the HP system

  I would like to know if these measures worked for you. If they did, it's great! Give us some reinforcements by clicking on the solution and laurels, buttons that help and others see that we have the answers!

  If you are unable to reach a resolution, please click on accept the Solution to help others with similar issues.
  If you like my assistance, please click on the thumbs up icon.
  The two icons are below this post.

  Kind regards