The 8.1 Windows USB microphone volume is extremely low

Similar Questions

• Satellite A100-532: the microphone volume is extremely low

  I just bought Satellite A100-532 and I have a problem with the audio input. I can't use the microphone to chat with my friend on msn or even record my voice on the hard drive because the volume is extremely low.

  I tried to turn the volume on the desktop and on the RealTek HD audio Manager, but nothing helped. Microphone works perfectly fine, as I hear myself on the speakers.

  Normally, with my old laptop (M30 series) I could use sound recorder to record the music that I play using Winamp or WinMediaPlayer, but for this new laptop it detects all the sounds at all... just silence.

  Please notify.

  Hello

  You should also check the volume controls in the "Audio & Sound devices" in the Panel.
  In the 'Volume' tab it please go to "Advanced".
  Then a "Volume control" should appear.
  Check if all controls are set at a high level.
  In addition, enter the 'options' and 'properties' and activate all volume controls.
  Also change to "recording" and activate here also all the controls.
  Additional you must check if the "check" is set to high.

  Use the 'Advanced' mic option and play with thrust mic settings.
  I'm sure that you will find the best settings for your mic record

• The microphone volume is very low on a Dell inspiron 13 7348 with Windows 10

  On my new Dell inspiron 13 7348 the microphone volume so low that my Skype partners can barely hear me. I checked all the settings in Skype and software audio dell and I updated all drivers... without success

  Connect a microphone extermal solves the problem, however, I prefer to not always have an additional microphone with me!

  Has anyone found a way to increase the volume of the microphone?

  Since an external device works well I'm afraid that the build-in microphone is actually of minor quality... what a disappointment

  So far, nothing has changed. I continue to go all my encounters with my laptop and this webcam with microphone build - in which I used the last in 2005... It's ridiculous... Don't know how many times I have had to explain to my colleagues why I use this external microphone... BTW, their Skype works well on non Dell computers with Windows 10 so I guess it's a problem that only affects users of Dell...

  As I said before, it's a big disappointment, and in the future I will avoid Dell products.

• Control USB microphone volume control

  Hi all.  It's me again.  I have a USB microphone connected to my XP machine.  I can't find a way to adjust the input volume.  When I'm not looking for?

  Start > Control Panel > sounds and Audio devices > Audio tab > 'Volume' button in the section "sound recording."

  If using the "categories" of the control panel display, then start > Panel > sounds, speech, and Audio devices > adjust the Volume of the > Audio tab > 'Volume' button in the section "sound recording."

• Satellite A200 - 14 d - the internal microphone volume is too low

  Hello, I installed the latest version of bios and drivers, but the problem with the internal mic has not changed: the volume is too low (levels the MAX value)-> unusable.

  And when the AC is plugged in, a heavy background noise appears in the hip or trendy helmet speakers.
  In addition, in the mic plugged in too... :(

  Hello

  I found similar topic where the user called Andrej wrote:

  Try this please:
  1. the right of the mouse, click on its icon in the task bar choose sound option
  2. change in the recording tab
  3. mark the front mic and click Properties
  4. change in the last tab named advanced
  5. in exclusive mode, uncheck the box first one

  Please test now and give me some feedback.

• The size of the font on the mail coming into my Live account is extremely low. Help, please.

  Original title: change the size of the font on incoming mail

  I use Windows 7 Home Premium and Live Mail email. I could not change the font size on the INCOMING MAIL to read some very small fonts on the incoming mail.

  Hello

   
  When you use Windows live hotmail and the problem you posted is related to Windows Live, it would be better suited to the Windows Live community. Please visit the link below to find a community that will provide the best support.
   
  Windows Live Solution Center Hotmail Portal
  http://windowslivehelp.com/product.aspx?ProductID=1
  
  http://windowslivehelp.com/product.aspx?ProductID=15
   
   
   
  Thank you

• How to set up a USB Microphone and a headphone audio jack at the same time on Windows 7?

  I recently bought a CAD u37 USB microphone for use in various records and a commentator game on Youtube when I came across a problem. When I plugged the microphone all other sounds immediately extinguished and I couldn't hear the game. I tried to unplug and re - plug in the headphones and the microphone, even play with no helmet without result.

  I did some research and found out it's because the microphone is automatically configured for audio input and output and the card sound/headset, not having a configuration. I've recently considered buying a $5 female jack audio converter USB to work around this problem.
  Will this work, or just be a waste of money? Are there simpler solutions like a flick of a switch of audio control panel configuration? Are there any programs that will allow me to configure the audio and input output? Is it still possible? Thank you!

  Hi Ben,

  I suggest you try to connect USB female to the converter audio jack, this should help to solve the problem with simultaneous USB microphone and audio input jack using headphones.

  If you have any more questions, respond to this post with the State of the question. I'll be happy to help you.

• How to add a USB microphone?

  I am trying to add a Blue Snowball USB microphone for use in first Pro CS5, but it does not appear under the audio hardware.  No idea why?

  If it worked in iMovie, then the computer is see it very well. In the first (connect the microphone before opening the first) go to the "Audio equipment" tab in preferences. Your "Default Input" drop-down list should list your snowball; If this is the case, go ahead and choose it, even if you don't have to. Looks like you've already tried this well. You connect the microphone before you start the first? And just to be sure that the computer is seeing the mic, go into your system preferences > Sound > entry and see that it is registered. Nice to go directly to the sound prefs keyboard shortcut is "Opt + Volume Up" (in fact, the volume keys work.

  Let me know and we can go from there.

  Also, you said you were on CS5, so things are different.

  I guess you have tried these instructions?

  Set up a microphone USB (Mac OS)

  1. In the application Configuration Audio and Midi in utilities, go to Audio > open aggregate device Editor.

  2. Check each of the following:

     • Your USB microphone.
     • An additional input device, for example, Line In.
     • An output device
  3. Select this new global device within Premiere Pro Audio hardware preferences panel.

• Re: NB550D - 'No mass storage devices' during the installation of Windows

  Hello!

  I recently bought a laptop Toshiba NB550D. It goes with Windows 7 Starter. So I decided to change the operating system, I want XP Pro or Windows 7 Edition Home Premium. Because the laptop is not a CD/DVD drive, I looked on the net for Windows USB installation.

  Problem is that when I install the USB, with regard to the partitions, it says I have no mass storage devices. I tried with XP and Home Premium, used 2 different programs to make bootable USB (WinSetupFromUSB and WinToFlash) and I tried with 3 different USBs to be sure that the problem is not of them. Both seem to do the job, but it still says I have no mass storage devices. I read on this forum, found [how to integrate a SATA AHCI driver into a Windows XP installation CD | http://aps2.toshiba-tro.de/kb0/TSB85017Z0000R01.htm] thread. I tried this, make an ISO with the built-in driver, made an another bootable USB key with it, but still, when I reached the partitions, they seem to be missing.

  I checked if the partitions will show if I start installing Windows directly from the Explorer to the laptop and partitions are then normally, so it seems that the problem only occurs when you try to install from a USB. But I want a * install own bootable *. I have no CD/DVD lens, so this isn't an option more.

  I'm really out of options on the left, tried everything I thought, it seems that I'm not the only one having this problem, but found no solution to it. Even if I put up with the Starter (even if I don't like), the HARD disk is separated into 2 partitions the two 116GB which is also very annoying.

  I'd appreciate any help! Thanks in advance!

  P.S. I also installed the latest drivers, BIOS seems to be too, but still did not help.

  Hey,.

  Which AHCI driver, I joined?

  Article you found how is just an example and is written for models with Intel chipset. I checked the NB550D specifications and this model has chipset AMD A50M, so you need another driver and the Intel driver will not work.

  So if you are looking for Toshiba NB550D European driver download page, you will see a driver called AHCI driver. This package contains the correct AHCI driver, but the problem is e for Windows 7 only. For obsolete XP it will not designed more pilots and that AMD is brand new. There is no old drivers.

  If you want to only Windows 7 Home Premium that s no problem. Therefore, you can use the mentioned AHCI driver. For example, to create a new Windows 7 bootable USB key with this driver and installation should work fine. :)

• Tascam-144 and samson c01u usb microphone

  Hello, me with even more problems.

  I use a tascam US-144 as audio device mk2, which has 2 xlr inputs... However, my usb microphone (I bought before the tascam) and I can't for the life of me work a way to implement the tascam, both the micro usb at the same time. Therefore, to use th samson usb mic I have tascam pilots to the generic producer audition drivers, which are really bad. I have asio drivers but for some reason, I can't work with the tascam either. Grrr.

  any ideas guys? the only thing I can think is:

  1. buy a condenser xlr (what is annoing I like samson)

  2 buy a card his decent pci to use instead of the tascam, only use the tascam when I need (i.e. the recording instruments).

  the two options involve spending more money, I have after getting the tascam I thought that my needs would be met, so be a little bored. but, if you guys have any other ideas?

  Thank you

  I think that you will find it impossible to combine. Two reasons for this: ASIO as a system can only cope with an audio device - period. In order to have the Tascam and a USB microphone running at the same time with ASIO simply is not possible. This is a limitation of Steinberg, not an Adobe one. Even if you try to work around this problem by using the MS drivers for both, you're always stuffed, however, and this is the main reason why it won't work - you haven't synced the two devices together, and without doing this you will meet click and appears galore. Not only that, but you can't synchronize them - there is no way to do it at all.

  Your only realistic option here is to whisk the Samson mic on eBay and get less equivalent USB.

• Volume controls on the keyboard after the upgrade to Windows 8

  I have a Touchsmart 520-1070 with the mouse and keyboard without wire factory.  After the upgrade to WIndows 8, the volume controls no longer work.  I tried the Recovery Manager to reinstall the keyboard drivers, but there is no driver keyboard under hardware drivers.

  In the following device manager are listed under keyboards:

  HID keyboard device

  Keyboard 109 MCIR Microsoft eHome

  Keyboard MCIR Microsoft eHome

  Microsoft eHome key remove control Keayboard

  PS/2 standard keyboard

  Any report that they are installed and are working correctly and that the drivers are up to date.

  Has anyone else seen or solved this problem with a Touchsmart computer?

  The instructions below were provided by HP support.  This has restored the function on the keyboard volume controls.  The referenced below drivers are drivers IDT high definition Audio Device.  I am not sure that it was necessary to reinstall the audio drivers.  It can only had to remove the USB dongle and back to restore the functionality of the button.  Note: the USB dongle is located behind the VESA Panel to the back of the PC.  No tools are required and the dongle can be removed and replaced without shutting down the PC.  VESA panel removal requires a bit of a steady hand, pulling the lip which is close to the connections on the rear panel.

  Instructions received from HP:

  Please go to the following link and check the "return of the system", article #7 is the USB dongle:

  http://support.HP.com/us-en/document/c03026390

  After you have reinstalled the receiver, please download and install the following driver:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=CP-110499-1&CC=US&DLC=en&LC=en&os=4132&Product=5157120&sw_lang=

  Then install the following update:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=CP-112060-1&CC=US&DLC=en&LC=en&os=4132&Product=5157120&sw_lang=

• Computer recognizes the usb microphone and the head set with the sound prompt but not instructions to continue.

  Original title: usb speaker and seeded

  c.p. recognize the usb microphone and head studded promp sound but no instructions to continue. I am trying to add voices or narration to my editing of soundtrack.

  Hi Billylambert,

  1 Windows operating system you are using?

  2. What is the brand and model of headphones and microphone?

  3. what video editing software do you use?

  4. were you able to use the device before without any problem?

  5. have you made a recent software or hardware changes to the system?

  If you are using Windows 7, you can try to run the Audio recording utility and check if it helps.
  Open the troubleshooting of Audio recording

  For more information, see the article:

  Connect one microphone, music player or other audio device to your computer

• How can I download photos in Gallery windows on USB microphone please

  HOW CAN I DOWNLOAD PHOTOS IN GALLERY WINDOWS ON USB MICROPHONE PLEASE

  HI Margaret Winwood.

  There is no way to directly copy the photos from Windows Photo Gallery into the micro USB drive.
  You will need to manually copy the pictures from the original location of the pictures on the computer, and then manually copy into the microphone connected to the computer player.

  Try the following steps to copy photos in the micro drive.

  (a) right click on the photo in Windows Photo Gallery and then click Open file location.
  (b) now right-click of the photo, click on copy, then open the Windows USB drive and paste it.

  Windows Photo Gallery: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Photo-Gallery-frequently-asked-questions

• The USB headset volume buttons stopped working

  Let's see if a second go make me somewhere...

  I have the Travelite ASUS HS-1000w headset. It is compatible with all versions of Windows. I got this headset special for about two weeks before the volume buttons stopped to change the volume.

  It is plug-and-play 'driver for free', so there is no update driver for him - I checked. It is always set as the default audio device to use when it is plugged. I don't have any Intelli-products (IntelliType, IntelliPoint; someone has suggested that there could be a conflict).

  It worked with no problems whatsoever until one day, I restarted my laptop and ONLY stopped volume keys their functions for an unknown reason. It is not the USB port; change ports makes no difference. It is not the helmet; the buttons work when tested with other computers, PC and Mac. Nothing has been installed during the session before rebooting, not even the updates of Windows.

  Still the volume buttons still don't move the volume slider. I have tried everything I can think of, including uninstalling the driver/restart/connect the headphones back in and let him make his case. My last stations are making a Win7 repair install and if this does not work, reinstall Win7 entirely. But, as we can guess, I don't want to have to basically EVERYTHING (200 + concerts) reinstall on my computer just to get one thing working again which, at this rate and based on past with her, events cannot be guaranteed to stay work again for much longer after that.

  What REALLY bothers me is that seems to be the only person on the planet who is having that kind of question.

  How can I get these buttons work again if it's something on my computer that affects their? If anyone has any clue that could help me somehow, I'll give you $ 1 billion.

  (Well, not really, but darnit, I'm DESPERATE!)

  Hi Tyberious,

  Please see the post below with a similar problem:

  http://VIP.ASUS.com/Forum/view.aspx?board_id=21&model=HS-1000W&ID=20100306223646109&page=1&SLanguage=en-us

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• The guard microphone volume discount 100%

  The volume level for my headset keeps discount 100% on a regular basis. My normal settings are 10 dB and 50%. It is a major problem for me since I am forced to use speech recognition to control my computer because of a disability and when it resets, it is very difficult for me to control the computer.

  I am using windows 7 Home premium x 64 on a Toshiba laptop, A505, with 4 GB of ram. Any help is appreciated.

  The volume level for my headset keeps discount 100% on a regular basis. My normal settings are 10 dB and 50%. It is a major problem for me since I am forced to use speech recognition to control my computer because of a disability and when it resets, it is very difficult for me to control the computer.

  I am using windows 7 Home premium x 64 on a Toshiba laptop, A505, with 4 GB of ram. Any help is appreciated.

  
  We have recently become frustrated with the same problem. We believe that it occurred because of an automatic update of Vista. There is also the problem in Windows 7.
  We finally had to go into the registry and do some permanent settings. Once the settings you can run the utility to Set Up My Microphone, otherwise it will cost 100%. See the last message in the following link for the MSSpeech - Forum.com:
  http://www.msspeech-Forum.com/forum_posts.asp?tid=133&title=problem-with-move-and-home-commands-being-issued
  Registry settings, I've used are there.