Eyelids
So - I followed the video via Youtube - which was EXCELLENT! - but the problem I encounter is now with the eyelid. My, if I move my eyelid of the + GROUP EYES student of my character is able to move - however, the eyelid is visible when my character flashes. When I move my eyelid in the + Group EYES the eyelid disappears when the character is flashing, but it moves with the student. Ugh. I want just that he disappear when the character is flashing and does NOT move with the student.
Thank you.
Yes - so when you put a nod to a group of the eye, this means that when it fires it will hide all the other stuff in the same group, regardless of what it is.
It should not move with the student though - is this possible somehow got together with the student, or marked in this way? Or maybe marked as an eyelid, which would mean that it moves with your own eyelids (which maybe you don't want in this case)?
In the example of Wilk, you will notice that the lids are within the Group of the eye, but then in their own separate group "Lids" in there. If you follow this structure, it should work...
Tags: Character Animator
Similar Questions
-
Re: Split on the upper eyelid on Satellite P100
I've had my laptop now for about 2 years. In the first year, a split appeared near the hinge and the cover has been replaced under warranty.
Now almost a year later the same thing happened again and the laptop is out of warranty.If someone else has had a similar problem and where can I get a permanent problem solution so that it do not replace again.
Hi Michael
Unfortunately, you need to replace the lid cracked again.
Something similar happened to one of my friends, and since the second replacement everything is ok now.
It seems that the ASP has replaced the upper eyelid with the new design.Good luck
-
I have a problem with new EyelidFieldManager 5.0
public HomeScreen() { super(MainScreen.NO_VERTICAL_SCROLL); m_eyelidFieldManager = new EyelidFieldManager(); m_eyelidFieldManager.addTop(new ButtonField("EYLID TOP BUTTON")); m_eyelidFieldManager.add(new ButtonField("TEST BUTTON"), 0, 0); m_eyelidFieldManager.add(new ButtonField("TEST BUTTON"), 0, Display.getHeight()-35); m_eyelidFieldManager.addBottom(new ButtonField("EYELID BOTTOM BUTTON")); add(m_eyelidFieldManager); }
It's just a screen screen. extension class The buttons in the upper and lower eyelids draw UNDER the two buttons at the top and bottom of the screen. If the behavior seen here: http://docs.blackberry.com/en/developers/deliverables/11945/Eyelid_field_925609_11.jsp is not possible as a field full screen would mask the eyelids completely - what a pretty major bug or am I missing something?
System: Windows7.0 JDE 5.0.0.14 running
Thank you
roygbiv
Confirmed by Rim as a bug, a fix has already been submitted, but it is not in the public version.
Thank you
roygbiv
-
SA
I do a custom button and add to a screen extends screen then
I added a listener to accept the actions of the user
It worked fine
but when I added it to the eyelid area manager
and to add a listener (.setChangeListener (this) accessories FieldChangeListener)
It's not wo
WH
thnks in advance: flower
THE problem was with touch methond it was return true then he locked all screen
so
It should return false to unloack to the touch of the screen
-
How do you get the eyelids to animate for strabismus and flashing?
I was reading in the PDF you provided below and I noticed in the eye blinking you have a section that describes how to make an eye blink with eyelids instead of a swap of sprite layer. I can't get this to work. Having the character to squint and everything that would be cool. I've renamed all the layers and the handles of origin of installation.
The example given is also the robot character, but I can't work on this character either.
If anyone has any idea what I am doing wrong, please let me know.
The Robot in the examples project (linked at the bottom of this page: character animator tutorials ) has an example of 'form' eyelids, however the existence of the layers in the file "Blink on the left" and "Right Blink" that effectively hides. We'll fix that, but in the meantime, you can experiment by removing these layers (in the Panel in PS or puppets) and then see how the upper & lower eyelids.
If the skin of the face of your character behind the eyes is a solid (not), you can make it look like the eyelids are clip eyes by them to be the same color as the skin of the face. It is a workaround until we add clipping (as the track mattes in AE).
-
How can I make shape disappear in the race? Effect of the eyelid
Here's the problem: I want the line over the ellipse to be less crowded for a cartoon. I want that part of the ellipse to disappear that meets the 'eyelid' race (see the left image). I've tried everything and can't seem to get there. I could really use the help.
I want the ellipse of eyeball to disappear because it goes in the contour of the eyelid.
Assuming that two objects are closed paths:
1. organize the two paths on the left.
2. Select both. Pathfinder palette: click the icon of the fracture. You now have a group of five closed paths.
3 object > ungroup.
4 Select the object (the unwanted access path). Remove.
5. Select the remaining objects. Pathfinder palette: click the icon of the unit. You now have a closed path.
Or:
1. organize the two paths on the left.
2. Select both. ShapeBuilder tool: AltClick the unwanted portion.
3 tool Alt. ShapeBuilder release: Drag inside the lower track (the rest of the ward) to the path of the eyelid directly above him. The two are reunited.
4. Similarly drag this shape to the left side of the eyelid. The two are reunited.
5. Similarly drag this shape to the right side of the eyelid. The two are reunited. You now have a closed path.
6. read the manual.
JET
-
Thunderbird won't find my new email address of eyelid Media
Hello
I use /thunderbird ver 38.3.0
My first email address is Virgin Media and works very well.
The other day I created a second VM address - and Thunderbird will not find it. I get this error message indicated in the attached screenshot (the new address works in webmail).
Any ideas please?
Regards, Phil Cook
To set up your new email account:
File > new > account mail Exisitng
or
Icon of the menu > new message > e-mail accountEnter your name
Enter full e-mail address @virginmedia
Enter the password - same one you use to access webmail
Click on the continue"" button.Thunderbird will try to locate the server settings.
Make sure that IMAP has been selected.
Check the settings of the server.
Click "Manual Setup".
It must be said:
Entrants: IMAP,
Name of the server host = imap.virginmedia.com,
port 993
Outgoing: SMTP
Name of the server host = smtp.virginmedia.com,
Port: 465Make sure that the host name of the server is correct.
Click on're-test '.
If ok, click 'Done' to create the email account. -
As the owner of the latest Mac Pro, I'm looking into buying one of the old Pro models for the update. In particular, the model 2009. What I want to know is I am able to upgrade the processor with all the same socket?
I'm looking at one is double a processor with two cores quad but I noticed that I can get a couple 6 hearts and I want to share.
In addition, would have problems with jump in a recent quadro card?
And for someone who has updated an older, are there pitfalls that I should look out for?
Thank you
The 2009 and later a CPU and RAM slots began backplane and moved to a 'plateau' at the bottom of the sliding chassis. There are two cards of the 'plateau' different processor - one with chip socket a processor, one with two Sockets. Map of all plate can be replaced by another, but both cards connectors are always in demand and therefore expensive.
You can replace the processor chip, but you must be very attentive to full coverage vs without eyelids and get the correct physical processor. In addition, parts for dual sockets are not the same party as the mono-socket part.
-
Is it possible to upgrade my laptop HP 635 to a Dual Core processor?
My laptop currently has an APU AMD E-300 w / graphics Radeon HD 1.30 GHz. I've never done this before, so I have no experience in the upgrade or install a new processor.
Hello
Here is some information on this processor:
Type CPU / microprocessor Market segment Mobile Family AMD E-Series Model number E-300 Reference number of CPU EME300GBB22GV is a microprocessor tray/OEM Frequency 1300 MHz Clock multiplier 6.5 Package 413 - ball without eyelids micro-BGA (FT1) Power outlet BGA413 Size 0.75 "x 0.75" / 1.9 cm x 1.9 cm BGA processors, like this one, are soldered on a motherboard, therefore, the level or their replacement is extremely difficult.
Kind regards.
-
Can I replace my CPU in my laptop?
Hello, I would like to know if I can replace my CPU in my laptop. I have a laptop of HP 2000.
Thank you
James Sisk
Hello
The following link shows its specifications:
http://support.HP.com/us-en/document/c03905124
and here is some information about this processor:
Type CPU / microprocessor Market segment Mobile Family AMD E-Series Model number E-300 Reference number of CPU EME300GBB22GV is a microprocessor tray/OEM Frequency 1300 MHz Clock multiplier 6.5 Package 413 - ball without eyelids micro-BGA (FT1) Power outlet BGA413 Size 0.75 "x 0.75" / 1.9 cm x 1.9 cm It seems that you can not pass the CPU because these BGA of processors are normally soldered to the motherboard.
Kind regards.
-
Can satellite S70T-A016 - work on the 5 GHz wireless?
I tried to set my router to only use the 5 GHz. My ProBook 6550 b (at least one year) work didn't blink an eyelid.
My private Toshiba-A016 S70T, less thtn a month not to see the SSID.
Is it possible to encourage him to speak about 5 GHz WiFi?
Thanks in advance
GizmoThe 5 GHz range depends on the WLan card that is built into the laptop.
WiFi standard 802. 11 B and G supports 2.4 Ghz
The WLAN standard 802. 11A supports 5 GHz
The WLAN standard 802.11 N supports 2.4 Ghz and 5 GHzBut if the Wlan card would not support 802.11 has then 802.11 N standard would go only to 2.4 Ghz
Another thread on a similar theme:
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=72831 -
HP Pavilion ZV5000z thermal paste
Is there a video or instructions step by step on how to renew the thermal paste in this laptop?
This one is pretty good. Your processor may be slightly different. It is a 'lid' processor with a metal cover on the die of the entire processor. Your perhaps without eyelids, where you can see the Green circuit part printed outside of a metal core. I posted a picture of this kind of processor in response to another of your questions.
http://www.YouTube.com/watch?v=qum1WSJUx0E
Let me know if you still have questions after that.
If it's 'the Answer' please click on 'Accept as Solution' to help others find it.
-
Satellite 1710CDS - HARD drive replacement
Hello
I have a question about the portable satellite 1710CDS.
A week ago my hard drive of the laptop above broke down.
Fdisk and partition magic are not able to detect the HARD drive.
My first question is where is the HARD drive located?
It is under the keyboard, as you can see by some other Toshiba laptops?
And is there anyone who knows what capacity hard drive to this cell phone is supported?I hope someone knows the answer to my questions?
Jeroen cordially
Hello Jeroen
To swap the drive HARD on this laptop is not easy. Sounds stupid, but the unit must be dismantled completely. You need to remove the keyboard and on the left side, there is cable that connects the HARD drive with main card. To remove the HARD drive the upper eyelid must be separated from the bottom. It is not a simple procedure, and if you do it yourself, you should be very careful.
As far as I know this device supports up to 10 GB HARD disk.
Good bye
-
How iphone5s factory unlocked?
Hello world.. !
I buyed my 5s Dubai Iphone is not factory unlocked.
I want to factory Unlocked, so if I travel my country I can use it.
Operating name: EYELID
Geographical area: UAE (Dubai)
Carrier: 23.0
IMEI: provide if needed
Thank you
Only the provider of cellular origin can unlock the iPhone. You need to contact them to determine their policy of unlocking.
-
Problem starting HP Dv5-1104tu
I have a laptop HP dv5-1104tu which is not put into service model. The last time I Hibernate that & now I have my impossible to start. When I press the power button / stop it will come back on for a second or two, then going off. I try to fix byself to help by pressing the power button on 10 to 30 seconds after removing the power cord & battery. I always facing the same problem. Please suggested me the solution as soon as POSSIBLE.
Thanking you!When you have the battery removed and the power adpater connected is power has led to solid or flashing.
With the battery and power adapter plugged in and the power button you hear the fan turns on for a moment while the led lights and shuts back?
The possibility exists that you can test the power on a laptop adapter or use another power supply compatible eith your to try a startup?
You did all the troubleshooting steps that are on this document from HP web?
If you have a magnet available try move around the edge of the upper eyelid and the lower case while pressing the power button to see if the reed switch will allow your laptop to start.
Best regards
ERICO
Maybe you are looking for
-
What's wrong? 437 GB free of 499
but space bad apps is 30 GB
-
BIOS update solved the Portege M400 fan noise
The new version of BIOS (1.8) for Portege M400 solves the problem of fan noise. The Readme.txt explains that the temperature will rise only in three degrees. Very important, very recommended patch for users of M400. Now I can use my tablet in my busi
-
How can I copy (or import) headings (and feet) of a Pages'09 document Pages 5.6.1 document? In addition, can I prevent 5.6.1 automatically removing the headers of records ' 09? Wrong
-
How to connect e xperia to bravia screen mirror kdl47w804a
mirroring of the screen
-
Pavilion g6-2213sa: intermittent screen for hp pavilion g6-2213sa
My laptop is a little more than three years and has developed a screen problem. The screen displays correctly but only in some cases of opening angles. When the screen is blank, I have to change case to the opening angle until it redisplays. Would I