F:\ is not accessible. Access denied when you click on the DVD drive.

Similar Questions

• I have a drive mapped to the network, but the icon is located in a folder. I get access denied when I click on the drive.

  I have a drive mapped to the network, but (My Computer) icon is a folder. I get access denied when I click on the drive. But if I open windows Explorer, I can access the drive mapped without problems. Win Xp

  original title: mapped drive error.

  Hello

  Make sure that the mapped drive is configured to share and works on part.

  Auto-mappage will not work if there is a problem with sharing.

  Maybe this can help.

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq#trusted

  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP -http://support.microsoft.com/kb/875357

  In Win XP pro you can visually see the setting of authorization/security and configure them according to your preferences.

  http://www.Microsoft.com/windowsxp/using/security/learnmore/AccessControl.mspx#securityTab

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

• Error access denied when you try to compress a drive

  Recently, I made an installation of Windows 7 Home Premium on a small SSD. In order to save space on the SSD drive, I tried to compress the drive. However, when the file in C:\Program Files\Common Files\Microsoft Shared\ink\Alphabet.xml I received an access denied message. When I look at the permissions of the "ink" folder, I see that administrators, creator owner, and system having NO right on the record either. Users have Read & Execute, display the contents of the folder and read permissions. The only other group with access is trusted installer with the rights of contents of folder list.

  A random sampling of the files in the program files and the structure of the Program files (x 86) have similar permissions across, and I am also able to compress most of these files. I know that I was able to compress drives together before in Win7. What is wrong here? My user account is a member of the Administrators group.

  Thanks for the reply.

  I'm sorry to know that the proposed methods previously has not helped.
   
  I would like to inform you that you cannot compress locate some files in C: drive because some system files are currently in use by the operating system. However, it is not recommended to compress the C: drive as it can make the System unstable. Also if Bootmgr is compressed you will not be able to start the computer.

   

  In addition, if you need more space on the C: drive, you can use the disk cleanup utility.

  Reference:

  Delete files using disk cleanup

  http://Windows.Microsoft.com/en-us/Windows7/delete-files-using-disk-cleanup

  Note: This removes temporary files, empty the Recycle Bin, and removes a variety of file system and other items that you no longer need.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

   

  Thank you.

• Downloaded my new site of Muse to an existing domain, replacement of the old site, now I get a 404 not found error page when you click on the link via google

  Hello

  I recently had a website for my business and I decided that its becoming outdated seriously.

  I created a new Web site using adobe muse with the original plan to delete the old site and replace it with the new site muse, but on the same domain name.

  Yesterday, I saved all the files of my site obsolete and deleted from the server and downloaded my new site Web de Adobe Muse to my FTP host with the original domain name.

  Now, when I search the keywords I'm looking generally when I had the old site, the link comes up, but when I click on a 404 not found error page appears.

  At the moment, I do believe that my works from home page by clicking on it, all other pages seem to show a 404 error.

  I'm not very experienced with web site design, please help me as soon as possible. My business is internet-based, every day without my site, my business is suffering.

  Looking forward to a response. Thank you.

  URL of the site please?

  In addition, how the site works in preview? If it works in preview, and all links to pages etc. are very good that there should be no reason for this issue, unless there is a server problem.

  After you download the new file, confirmed that this new file is downloaded correctly? You can use any ftp client and connect to your server to check downloaded files. You can contact your Web host for questions at the end of the server.

  Thank you

  Sanjit

• Drive external drive is not accessible, access denied.

  My computer (Win7 Home Prem) ran chkdsk after an update of windows, probably triggered by ccleaner or glary utilities. My external hard drive was plugged during the update, reboot and chkdsk. The chkdsk command probably checked my coz external HD, I can see folders/paths that were there. The next day I couldn't access my HD due to a mistake, saying: it was not accessible and access is denied. I searched online potential solution and tried the following without success, and they have been applied using an admin account and an admin cmd.

  * Change the permissions and ownership, but the property always says it's impossible to determine the owner.

  * Changed the share permissions.

  * Do you have 'takeown' and a 'icalcs' has changed owner but same error.

  * Check the disk management, drive seemed ok with the letter drive and all.

  * Ran chkdsk /F on both of my C: drive and external hard drive, both completed successfully without error during the analysis and not found bad sectors.

  * Program of Unlocker used to check if player was running another process, found nothing.

  In my computer, it shows the letter drive and NTFS, but not bar showing free space. Properties would show 0 free space / used. Here I can go to cmd and access the content from there. I used the function of 'Explore disk' of glary Utilities and I could see the content and even run mp4/avi files in the player. So I guess the drive and its contents is ok, just that I can't access it through normal means.

  Thanks in advance!

  Rob

  Hi LeBlanc,

  I apologize for the late response and can certainly understand your concern. I appreciate your efforts. As you mentioned that you are not able to access the external drive, and you receive the error of access denied when you connect to your user account, I suggest to try to create a new administrator user account and then try to access the external drive.

  To create a new user account, please follow the steps mentioned in the link below:

  http://Windows.Microsoft.com/en-us/Windows/create-user-account#create-user-account=Windows-8

  Please let us know if the problem persists.

• Photoshop cs4 access denied when you try to install from disk in Windows 7 64 bit.

  Photoshop cs4 access denied when you try to install from disk in Windows 7 64 bit. I tried in

  safe mode and it starts to install, but get an error there as well.

  What should I do?

  So when you put the disk in it does not work properly? When the disc is inserted, you should have a window pop up with 2 options. 1. install and another to see what is on the disk. Choose to open the disc or explore. Navigate to the folder where is the photoshop CS4 .exe file (which runs the Setup program), right-click on the .exe file and choose Run as administrator and it should start. See if it will install. If this isn't the case, then read below.

  I don't know how long you got in the installation until so chances are, you will need to run the CS4 Cleanup utility. 2 levels to run but do not use 1 or 2 just type number 3.

  http://www.Adobe.com/support/contact/cs4clean.html

  You may need to run the utility windows install cleanup too

  http://support.Microsoft.com/kb/290301

  Before you try to reinstall the software make sure that adobe reader is not installed. If it is delete. It has caused problems in the past with vista and CS4 installs.

  You can also disable windows Defender and all antivirus software. You can keep UAC Windows 7.

  When installing CS4 to 90 percent, it stops almost and may take 5 to 10 minutes at the end. It's normal. What a pain huh...

  After the installation is complete, restart

  After restarting, go to the icon of CS4 64-bit or 32-bit (depends on 32-bit or 64-bit Windows 7) in the starting area, right-click on CS4 64-bit (if you have windows 7 64 bit), and then choose Properties, Compatibility tab, and then check run as administrator at the lower part. Hit apply, ok to finish.

  Now, run CS4 and run the update.

• I get "access denied" when you try to add the component 4543BD

  I get "access denied" when you try to add the 4543BD to my diagram. This component has been added since a previous version. I use Multisim version 12.0.0 student edition.

  Hi Diarra,

  I checked my database and the 4543 isn't in the student edition. If you open a drawing that was created in a version more recent as the education edition and copied the part to your database, when you place this part, you will get the access denied message.

  Attached is a diagram with the part, you can open it and build you circuit around it.

• I have 5 "MY BACKUP" folder on my drive C in 2008. How can I remove the old ones. Receiver error MSG "Access denied" when you try.

  I have 5 "MY BACKUP" folder on my drive C in 2008. How can I remove the old ones. Receiver error MSG "Access denied" when you try.

  Hi PJG_918,
   
  To resolve this problem, you must turn off Simple file sharing and then take over the folder.
   
  Here is an article that will explain the procedure to the same thing:
   
  "Access denied" error message when you try to open a folder

• How can you stopPhotoshop CC2015 access denied when you try to scan photos?

  How to stop Photoshop CC2015 of access denied when you try to scan photos? I had to resort to the application of the C6. Was able to use the CC2015 until tonight.

  Have you tried restarting your scanner and restarting your PC?

• When you visit a particular site my user name is entered automatically when you click in the required area. I want to avoid this, how?

  This site requires a username to be filled in a specific area and in another box, you enter a series of numbers generated by a generator of numbers (so not a password - different series each time that you open a session).
  However I do not want my user name appears automatically in the first box. Trying to change that in the security settings (extra-options-security), there is a password section where you can choose any exceptions to the rule of the memory (if the box remember is marked). When clicking the exceptions button, the url of the site I'm talking about is not displayed, and it cannot be entered either, since you can't delete here.
  When you click on the option "saved passwords", nor the site, nor the username is listed. I think I've read all the help sections regarding usernames and passwords, but found no solution.
  How can I avoid this username (so only a user name - not the usename/password combination), appear in the box?

  Click on the box, hover over the drop-down menu with your mouse, if you select the word you want to delete, and then press the delete key. If Firefox fills automatically in forms of control

• Can see is more videos on the internet when you click on the arrow of reading, it becomes just a black screen.

  Original title: can see more videos on the internet is

  Since last week, my computer won't play any video on the internet. When you click on the arrow of reading, it becomes just a black screen.  I can always download movies from netflix.  I uninstalled adobe Flash Player and reinstalled and still does not work.  Someone at - it answers? Thank you!

  Hello

  Yes, it will work.
  However, when you try to open something on the internet, it opens with the default browser.
  Method 1: You can make the default Internet Explorer browser and then perform the troubleshooting steps.
  Reference:
  Change the web browser by default
  http://Windows.Microsoft.com/en-GB/Windows-Vista/change-your-default-Web-browser

  Method 2: Since then, it was working fine before, you can restore the computer to a date when it was working fine.

  Reference:
  System Restore: frequently asked questions:
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions
   
   
  If online videos play fine in Internet Explorer and cause problems only when you play in Mozilla Firefox, you can ask your question in the Forums in Support of Firefox as well:

  Here is the link: http://support.mozilla.org/en-US/questions/new

• When you click on the 'Info' to the background action bar button, the application crashes.

  Hello

  Recently, we have brought successfully a BlackBerry 10 Android app.

  Everything worked fine, except the thing that when you click on the "Info" button in the action bar that appears at the bottom of the screen - the application crashes.

  I guess that this button should display a connection, or the help page. In our application, we have such a page (like an ActionItem in the ActionBar).

  Yes, is there a way we can fix it, so that when clicking on "Info" button to view our about page? Or at least to do something to prevent the application from crashing, for example hide this button.

  PS: We tested the app in the simulator of Alpha BB 10 Dev.

  Thank you.

  Hello

  Thank you for your comments. In fact, it is a known problem in the current Runtime Android on the Simulator release BlackBerry 10. It has nothing to do with your application, as this action bar fits into the Runtime Android and not your application. Normally when you section the 'Info' button you will see a screen showing you must use the gesture of back scanning used in applications Android Runtime. If you want your own topic button, you need to create your own menu.

  See you soon,.

  Matt

• How to do an audit in the order page IN. When you click on the button "submit"

  I want to do an audit in order IN. When you click on the "submit" button, it will be checked whether the OP is reserved and will display the message if not.

  I have a CO span from the original, I can know where should I put the logic inside the processFormRequest? and how to write code to control them thanks.

  public void processFormRequest (pageContext, OAPageContext,

  OAWebBean oAWebBean)

  {

  super.processFormRequest (pageContext, oAWebBean);

  }

  OK here is the code below,

  String sql = "START: 1: = XXPO_CHECK_RESERVED_PKG." XXPO_CHECK_RESERVATION(:2); END; « ;

  CallableStatement cs = txn.createCallableStatement (sql, 1);

  String outputval = null;

  try {}

  cs.setString (2, Segment1);

  cs.registerOutParameter (1, OracleTypes.VARCHAR);

  CS. Execute();

  outputval = cs.getString (1);

  TXN.Commit ();

  } catch (Exception sqle) {throw new OAException ("Error in the application of staffing", OAException.ERROR) ;}}

  -Beginning of the code by Hemant

  If ("N".equals (outputval) &! ") ». Equals (outputval))

  {

  throw new OAException ("The PO isn't in reserved State");

  }

• We have virtual machines on one of our groups that show alarms, but when you click on the tabs, alarms, or tasks and events there is no corresponding alert.

  We have virtual machines on one of our groups that show alarms, but when you click on the tabs, alarms, or tasks and events there is no corresponding alert.

  Can you try to make a vmotion host and see if it gets resolved? If not, can you close the virtual machine and start again? I have seen this problem before and a stop and start resolved.

• java.lang.NullPointerException when you click on the search query

  java.lang.NullPointerException when you click on the search query:

  There is nothing my project involved code...

  at oracle.adf.model.binding.DCControlBinding.reportException(DCControlBinding.java:201)
  at oracle.jbo.uicli.binding.JUCtrlValueBinding.findAttributeDef(JUCtrlValueBinding.java:632)
  at oracle.jbo.uicli.binding.JUCtrlValueBinding.findAttributeDef(JUCtrlValueBinding.java:597)
  at oracle.jbo.uicli.binding.JUCtrlValueBinding.getAttribute(JUCtrlValueBinding.java:1341)
  at oracle.adfinternal.view.faces.model.binding.FacesCtrlSearchBinding$AdfAttributeDescriptor.isRequired(FacesCtrlSearchBinding.java:3018)
  at oracle.adfinternal.view.faces.renderkit.rich.query.QueryBehavior.shouldShowInstructionText(QueryBehavior.java:66)
  at oracle.adfinternal.view.faces.renderkit.rich.query.QueryBehavior.refreshInfoFacet(QueryBehavior.java:37)
  at oracle.adfinternal.view.faces.renderkit.rich.QueryRenderer.renderContentRow(QueryRenderer.java:718)
  at oracle.adfinternal.view.faces.renderkit.rich.PanelHeaderRenderer.encodeAll(PanelHeaderRenderer.java:231)
  at
  
  

  Cvele_new_account, good point.

  Maybe you can try to remove the af: query to the page, and then drop it again.