F2 key is no longer active / disable the wifi switch card

Similar Questions

• How to prevent activation of the application switcher function the central button of the mouse

  I use a mouse third with a scroll wheel (button 3) as the central button of the mouse.  How can I prevent this activation of the application switcher function button?

  System Preferences > mouse allows you to assign actions to the buttons on the mouse. Some mice come with their own drivers/preferences.

• Satellite L650-11R: I can not disable the WiFi using Fn + F8 module

  Hello!

  I have a rather strange problem: I can not disable the WiFi using Fn + F8 module.

  It happens after reinstalling Windows. I installed Windows 7 Pro SP1 x 64 (MSDNAA). I installed the driver Broadcom WLAN, then Toshiba Value added package and Bluetooth Stack from Toshiba Web site.

  When I press Fn + F8 there is only a Bluetooth icon, I can enable and disable. And there is no WiFi icon.
  Wireless network card is listed in the Device Manager, it works.

  Before you reinstall Windows, when I had used pre-installed Windows 7 HP, it worked correctly: there were three icons, I could turn off/turn on WiFi, BT and the two WiFi + BT by pressing Fn + F8.

  Does anyone have a problem like this?
  Can someone help me?

  Thanks in advance.

  Hmm generally the FN + F8 should switch on / off the Wlan correctly.
  Maybe the WLan driver must be installed again even if the wireless network adapter is already visible in Device Manager.
  Try it

  Welcome & good luck

• How can I disable the integrated graphics card Intel so I can adapt the best graphics card Optiflex 270

  I have a FSFY27J that I under stand is a Dell optiflex 270.

  How can I disable the integrated graphics card Intel so I can adapt the best graphics card

  Thank you

  Walter

  Hi Walter-W,

  If your system is an OptiPlex gx270s you top AGP slot to set up a discrete video card. The integrated video card is automatically disabled when you connect the discrete video card.

• Tecra S11 - bluescreen when the WiFi switch is on

  I've known several accidents suddenly blue screen, with apparently no advice. After several tests of different conditions I counted it takes place when the WiFi switch is on. So, it should be associated with Bluetooth or WiFi.

  Any suggestions how to proceed further? apparently I have the latest drivers (Windows 7 64)
  Thanks, Guido

  Hey Buddy,

  Have you already checked the BIOS if you have installed the latest version? If this is not the case check this on the Web from Toshiba site and make an update of the BIOS. Maybe it helps

  But I had a similar problem last year and the solution was exchanging the WLAN card.

  I think your Tecra S11 should still be under warranty and in this case that the repair will be free. :)

• Windows 7 Build 7901 copy of Windows is not genuine, product key is no longer displays in the properties of the computer

  I think I have a virus that took my product key of Windows 7 and I am also able to do the windows updates.

  Try first to activate by phone (have the product key on the COA/sticker loan). Sticker is usually on the side of a desktop computer, a laptop computer background, sometimes inside the battery compartment, and you may need to remove the battery). If the activation of the phone does not work, then run the tool of diagnosis below and post your results.

  How to activate Windows 7 or Vista manually (activate by phone)
  http://support.Microsoft.com/kb/950929/en-us
  http://Windows.Microsoft.com/en-us/Windows/activate-Windows#1TC=Windows-7

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) to select your "country" you are in the drop-down list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048
  (888) 725-1047 or 800-936-5700

  -Product key of letters and numbers-

  Do not confuse the letter B with the number 8, the letter Q with the letter O.
  the letter G and the number 6.

  Not used the letters: A, E, I, O you and L S U Z unused numbers: 0 1 to 5

  =================================================

  Download and run the Microsoft Genuine Advantage Diagnostic Tool:
  http://go.Microsoft.com/fwlink/?LinkId=52012
  Post your results (copy button) and paste the results in your answer.

  J W Stuart: http://www.pagestart.com

• I want to disable the feature ' switch to ' sometimes I NEED the same site opened in 2 or more locations. How can I disable it?

  I am a travel agent and for example, I may have a client, ask questions about flights from southwest of 2 different cities to coordinate the arrival in a city. I often open the site in 2 different tabs, so I can quickly and effectively gives the customer responses. I don't want that it redirect me to the first tab! How can I disable this feature?

  You can duplicate a tab by holding down the control key, and then dragging the tab you want to duplicate on the tab bar.

  You can use the switch to the tab not more add-on to disable the switch to the functionality of the tab - https://addons.mozilla.org/firefox/addon/switch-to-tab-no-more/

• HELP and warning: Exchange ActiveSync email account disables the WiFi, Bluetooth, Cam and default USB!

  You establish a new Exhanche Business Account Provisioning System of the TPT Lenovo ActiveSync connection turns off WiFi, Bluetooth, camera and USB connections, even it is not caused by the commissioning of the company server. I trink Lenovo has to fix this emitiatly or the opportunity to randomly the profile settings of the Provisioning Manager in TPT.

  LENOVO IF YOU PLEASE FIX THIS OR LET US UNINSTALL YOUR SECURITY SYSTEM WHICH DISABLES THE FUNCTION NEEDED TO WORK ON TPT.

  By removing the Exchange account, the functions are turned on again, but it id not not possible TO use you business EAS account as it should!

  There is no solution the TPT us will BE useless...

  Best regards
  Pasper

  Quick solution myself:

  you will need to edit in the file following with the name "yourname.lenovoconfig" in the second line the uuid, you can see under settings / location & Security / Configuration profiles. The uuid is the alphanumeric code long of the parameters that was installed by the exchange server. You are able to also change th eDevice settings above, I blocked Dataroaming for example.

  
  
  http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="lenovoconfig.xsd" uuid="xxxxxx-xxxx-xxxxx">
  
   Sample policy  Manual yes no 
  
  
  
  
  
  
  
   Allow Allow Allow Allow Block Allow Allow Allow Allow Allow Allow Allow Allow Allow 
  
  
  
  
  
  
  
  
  

  What to do step by step:

  1 configure the Exchange account

  2 Note the uuid of the Exchange Server in the settings

  3. delete the Exchange account

  4 adjust the uuid and your settings at the top of the source code and send it to your Lenovo over e-mail - for example your googlemail.

  5. click on the lenovoconfig file and install the Lenovo-Profilmanager

  6. new to connect to your Exchange Server.

  7. now, everything should work how implement you the Lenovo Support contains a sample file with all the setting options which could be very useful. My settings are only a small facility to come around the problem. Hope to train here all I've been able to help.

• How to disable the Toshiba Flash Cards pop up?

  Hello!

  I have a question:

  When I move my mouse over the top edge of the screen, a series of shortcuts for the various parameters appear as mute, lock, power Plan, etc...

  It's really boring when I watch movies, because I see a thin white line at the top... so I would like to know if I can somehow turn off these icons? so, they do not appear? I don't use them anyway then...

  Here is a screenshot to make it easier for you if you do not understand my ramblings :)

  http://img444.imageshack.us/img444/3656/25134904qm0.jpg

  Thank you!

  Hello

  You certainly talk about the Toshiba Flash cards and this feature can be disabled in;

  Start-> all programs-> Toshiba-> Utilities-> settings for Flash cards.

  Check this, and you will find the required option.

  Good bye

• How can I disable the onboard sound card in BIOS on the Equium A200

  I use an external Creative Sound Blaster sound card, but the recording level is very low and were advised by Creative to disable the onboard sound in the BIOS but there is no option to do this. Can anyone help?

  Hello

  You can not disable it in the BIOS.

  If you want to disable the sound card, you can do it in the Device Manager!

  see you soon

• Satellite L70-B-150 - how do I disable the integrated graphics card

  Hi everyone (sorry for my English)

  I bought Satellite L70-B-150, it has two graphics cards: integrated intel hd 4600 + amd radeon r9 m265x,.

  How to disable BIOS (or uefi or otherwise), the graphics card intel?
  Of course, I know I can disable win8 equipment control panel, but what I need is to disable since the whole pc, because my linux operating system does not support the bi - gpu.

  Thank you in advance for a solution

  How to disable BIOS (or uefi or otherwise), the graphics card intel?

  It is not possible to disable the GPU (no matter if its gpu internal or external) in the BIOS.
  This option is not supported by the BIOS.
  You can disable the internal GPU in Device Manager, or you can configure the settings to use only the nVidia GPU.
  This can be done in the nVIdia Control Panel.

• How to disable the integrated graphics card? HP Pavilion a6400f

  I intend to install a new NVIDIA PCI-E x 16 video card, but my HP Pavilion a6400f comes with an Intel integrated graphics. I know that you need to disable the onboard graphics, but how? I checked the BIOS but couldn't find an option to turn it off. Any help?

  Message edited by soadfreak2005 on 01/16/2009 11:24

  You go to control panel, system maintenance, and then Device Manager. Scroll down and look for graphics cards, click the plus tab, click on the model of integrated graphics card you have. Then right click and a menu appears, select turn off and that's all. Then follow the instructions on your new graphics card. Good luck...

• Satellite P200-144: how to disable the TurboCache graphics card

  Hello

  Is there anyway to turn off Turbocache because it is share 527MB of RAM. 256MB will do me well

  Thank you

  Hello

  I put t think that it of possible to disable the nVidia TurboCache graphics card.

  In any case, check the settings in the nVidia control panel.
  Try to set the Advanced view for even more options!

  But this option is only a slight hope I do not know if you find something on Turbo Cache m.

• Zbook Studio G3 HP: How to disable the integrated graphics card Intel and use the dedicated Nvidea graphics all the time?

  Dear all,

  I have a HP zbook studio G3 laptop. I want to go to the Nvidia graphics card permanently.  I tried to disable graphics integrated in the Device Manager, uninstall the driver and allowing even the nvidea card chart of all profiles in the parameter 3D tap in the Nvidia configuration software. Non of them seems to work as the integrated graph is always in action and simple games could not be executed. I always keep in the option to high-performance mode, and the laptop is still connected. Should I manipulate the bios setup?

  Thanks in advance,

  Bezzi

  I have the version non-studio of Zbook 15 G3 which has removable video card. I added the video card after purchase and found that it worked just right if I went into the BIOS and set it to use only the nVidia card. However, because yours is graphic switchable I don't know that you have this option. Have you looked at even the BIOS? Press ESC you turn on, then F10

• disable the wifi Manager

  My Sony Viao Intel ProSet conflicts Manager of wireless connection with the Windows Connection Manager. Is there a way to disable the function of Windows wifi connection?

  My Sony Viao Intel ProSet conflicts Manager of wireless connection with the Windows Connection Manager. Is there a way to disable the function of Windows wifi connection?

  Because you can't have that one Utility Manager a wifi adapter at a time, the manufacturer most utilities automatically turn off Windows Wireless Zero Configuration.  If yours is not, follow these instructions:

  1. click on start > Control Panel.
  2. double-click on network connections.
  3 right click on wireless network connection.
  4. click on properties.
  5. click on wireless networks.
  6. check that it use Windows to configure my wireless network is not enabled. If this is the case, disable it.
  7. click on OK. This confirms that the utility Intel(r) PROSet/Wireless is configured to manage your network profiles.