Satellite P200-144: how to disable the TurboCache graphics card

Similar Questions

• How to disable the integrated graphics card? HP Pavilion a6400f

  I intend to install a new NVIDIA PCI-E x 16 video card, but my HP Pavilion a6400f comes with an Intel integrated graphics. I know that you need to disable the onboard graphics, but how? I checked the BIOS but couldn't find an option to turn it off. Any help?

  Message edited by soadfreak2005 on 01/16/2009 11:24

  You go to control panel, system maintenance, and then Device Manager. Scroll down and look for graphics cards, click the plus tab, click on the model of integrated graphics card you have. Then right click and a menu appears, select turn off and that's all. Then follow the instructions on your new graphics card. Good luck...

• Zbook Studio G3 HP: How to disable the integrated graphics card Intel and use the dedicated Nvidea graphics all the time?

  Dear all,

  I have a HP zbook studio G3 laptop. I want to go to the Nvidia graphics card permanently.  I tried to disable graphics integrated in the Device Manager, uninstall the driver and allowing even the nvidea card chart of all profiles in the parameter 3D tap in the Nvidia configuration software. Non of them seems to work as the integrated graph is always in action and simple games could not be executed. I always keep in the option to high-performance mode, and the laptop is still connected. Should I manipulate the bios setup?

  Thanks in advance,

  Bezzi

  I have the version non-studio of Zbook 15 G3 which has removable video card. I added the video card after purchase and found that it worked just right if I went into the BIOS and set it to use only the nVidia card. However, because yours is graphic switchable I don't know that you have this option. Have you looked at even the BIOS? Press ESC you turn on, then F10

• Satellite P200-1FZ: how to insert the smart media card into the card slot

  Hello

  I have read the slim manual, and I can't find any info on the card slot. (other than where he lives on the laptop)

  Could someone tell me please how to insert my card SmartMedia? the slot is huge and I'm worried about losing the card inside the laptop! I assume that the smart media will be automatically run?...

  Thanks in advance!

  It would be good to know what model of laptop you have.
  But, normally, for the smaller cards, you will need an adapter that is often included, as for the memory stick pro duo.
  I think it's just normal size and you have to put in the middle of the card reader slot until you hear a click.

  If you have not changed the AutoPlay settings, you must get a new window with the files on your card, when you put it on your laptop.

• How can I disable the integrated graphics card Intel so I can adapt the best graphics card Optiflex 270

  I have a FSFY27J that I under stand is a Dell optiflex 270.

  How can I disable the integrated graphics card Intel so I can adapt the best graphics card

  Thank you

  Walter

  Hi Walter-W,

  If your system is an OptiPlex gx270s you top AGP slot to set up a discrete video card. The integrated video card is automatically disabled when you connect the discrete video card.

• Satellite Pro P - how to disable the hot keys for camera assistant?

  Is it possible, and how, to disable the shortcut keys for the camera wizard?

  The default keys interfere with shortcuts of Microsoft Office (Word) - for example Alt + F9 to show/hide codes field to turns on the properties of camera assistant, Alt + 10 screen settings of camera etc.

  I find this very frustrating.

  Hello

  Of course you can turn it off.
  You must remove the software from the camera in msconfig start up.

  So go to start-run-msconfig online online
  Go to the Startup tab and disable the camera software. Restart the computer laptop and that s all!

  Good bye

• Disable the integrated graphics card?

  Hello

  I have a Dell XPS 15 L502X. So I recently installed a game called Wolfenstein: The New Order. And everytime I start the game I get an error known on the web as "wglCreateContextAttribsARB failed".

  I know that the cause of the error is that the game keeps identifying my integrated graphics (Intel HD 3000) as the main graphics card so that I have a dedicated onboard graphics (Nvidia GeForce GT 540 M, 2 GB dedicated memory).

  The problem is that my integrated card only supports OpenGL 3.1 and below, although my GPU supports up to OpenGL 4.0. I know for a fact that this GPU is able to run the game and YES I already chose my GPU as the primary graphics card under manage 3D, the global settings settings AND parameters of the program specific AND even tried setting the PhysX Configuration as the GPU itself at unsuccessfully.

  I also tried to disable my Intel HD 3000 by Device Manager (couldn't turn it off via bios), but whenever I do so that turns off the display of my laptop. However, I have a TV that my laptop is connected via HDMI. If my laptop screen is transferred to my TV and I can not change/turn my laptop displays ONE unless I had to re - activate the integrated graphics card. Strange in my opinion!

  On the other side, I ran the game without the integrated graphics card (when), and the game runs very well! CLEARLY the GPU (GT 540 M) is able to run this game, although the game is not identify him. Instead only identify the integrated Intel HD Graphics 3000 card or identifies the onboard graphics as the main reason any!

  Need help please, I want to play the game on my laptop screen not on my TV... Also on a side question, is it possible to completely disable my integrated graphics (Intlel HD 3000) without losing my screen? If so, how?

  Thank you for your time.

  EDIT: I discovered that a similar problem, I used to have with another game (watch dog) on the demanding game run my video card to support DirectX 11 for the game (so it never ran), now works correctly when I turn off my integrated graphics card and use my TV as my main screen! EVEN IF my GT 540 M is to satisfy the minimum requirements for the game!

  You can switch between graphics cards - Intel low performance for graphic intensive application of navigation/less graphically and using nVidia graphics high-performance hungry applications in graphics resources like games.

  You can take a look on the link shows to switch between the graphics card Intel and discrete graphics (nVidia, in your case):

  http://www.YouTube.com/watch?v=DCh9Eob0mNY

• HP G62 Notebook PC: Completely disable the secondary graphics card

  Hello

  I have a HP G62 Notebook PC that I bought a couple of years back. The problem I have is that the graphics card of (the age AMD) to the secondary address has been damaged by hardware components (probably due to multiple disconnections of power and unexpected stops). Everything else works fine. This problem is causing Windows to keep crashing through the blue screen, or not to display a picture at all after the Windows logo while booting. I managed to install Ubuntu on it and the operating system detected the damaged graphics card and worked around it (aka he turned off the power to the graphics card damaged and worked only using the Intel graphics card). My question is, is it possible to turn off the graphics card AMD to turn completely (from the BIOS maybe) so that I can re-install Windows and work on it using only the graphics card Intel?

  Please help, I'll provide more information if necessary.

  Please identify your laptop with its full product name or product number. You gave only a partial identification so far. I need I can take a look at the BIOS Simulator to see if it was possible there.

  Never mind providing the number or name of producty. I worked around it.

  I just took a look at the BIOS Simulator and found that there is no option to turn off the graphics card it. You may be able to work around it by removing the card.

  You can also replace the card with a card of the same work to find the switchable graphics feature. You should be able to find one to an online vendor at a reasonable price. If you don't feel able to do it yourself, then you can have the replacement carried out by a store.

• Satellite Pro A100: How to disable the card Board?

  Hello

  How can I disable the on-board its on my Satellite Pro A100?
  I can't find an option in the BIOS.

  And it is also possible to use the card reader with Ubuntu Linux?
  It is not up the cards.

  concerning

  Hello

  You want to disable an internal device?
  I wonder why

  However, you can disable it in Device Manager should mark the sound card, and then turn off.

  > And it is also possible to use the card reader with Ubuntu Linux?
  Why do not you will need a Linux driver that would be compatible with the card reader.
  As I m not wrong not the driver is from Texas Instruments

• Satellite L300-144 - how to replace the HARD drive?

  Hello!

  I have a problem: my laptop is Satellite L300-144, but I don't even know my hard drive model.

  Anyone know anything on this subject? And how replcae it? I mean where the hard drive is placed?
  And another question: is it available in BestBuy for example?

  THX

  Hello

  As Akuma said on the underside of the laptop, you will find a HARD drive cover is fixed by 2 screws I think. If you remove these screws, you can see the HARD drive and remove/Exchange it.

  Satellite L300 supports SATA 2.5 hard drives, and you can buy the HARD drive of every computer store where you want to.
  I have good experiences with Seagate and Western Digital hard drives but of course, you can buy a disk from a different manufacture. ;)

• Satellite P500-193 - how to disable the multimedia Panel?

  Hello!

  I just bought a Toshiba Satellite P500-193. It's great, but I have a problem. During online games and other games my hand sometimes 'click' on the media panel and then windows media player star and game is minimazes in the bar system :(

  How can I turn off this Panel the temporary? Photo of this Panel: http://yfrog.com/87toshibasatellitep50002j

  Hey Buddy,

  I checked my Satellite P500 and it seems that you can disable temporary t these buttons of illumination.
  You can completely disable the buttons of the illumination in the BIOS (the BIOS setup > advanced > System Setup). There is an option called function key. You must set it to disabled.

  But I m wondering about this problem, I put t he have while playing games. Alternative, you can connect an external keyboard to play games. :)

• Satellite L70-B-150 - how do I disable the integrated graphics card

  Hi everyone (sorry for my English)

  I bought Satellite L70-B-150, it has two graphics cards: integrated intel hd 4600 + amd radeon r9 m265x,.

  How to disable BIOS (or uefi or otherwise), the graphics card intel?
  Of course, I know I can disable win8 equipment control panel, but what I need is to disable since the whole pc, because my linux operating system does not support the bi - gpu.

  Thank you in advance for a solution

  How to disable BIOS (or uefi or otherwise), the graphics card intel?

  It is not possible to disable the GPU (no matter if its gpu internal or external) in the BIOS.
  This option is not supported by the BIOS.
  You can disable the internal GPU in Device Manager, or you can configure the settings to use only the nVidia GPU.
  This can be done in the nVIdia Control Panel.

• Satellite C855 1VD - how to disable the "open - Panel" marketing?

  Hello

  I want to disable the feature ' open - panel power on ", I checked the BIOS setting where it is disabled. However, the laptop boot always starts when I open the Panel. Also tried via the application of parameters of system Toshibe in Windows 8, no effect.

  Satellite C855 1VD - Windows 8
  BIOS is version 3.27 (cannot find a newer BIOS update)

  Can someone help me?

  THX.

  Diego.

  Procedure is described in http://aps2.toshiba-tro.de/kb0/FAQ2C03FA0001R01.htm?
  A complete stop and it will work if your laptop is turned off.

• Satellite C50 - B - how to disable the touchpad zoom feature?

  Is there a way I can disable the zoom on my touchpad function.
  It is very annoying when it changes continuously zoom.

  Go to control panel-> mouse control
  Here, you should check the last tab.

  The name of this last tab depends on the driver for the touchpad that is installed on your laptop.
  There are two possibilities: either MOMENTUM or Synaptics driver

  In the case where your laptop supports the touchpad DRIVE, go to the tab MOMENTUM.
  Now you will see new window ELAN Smart Pad with 3 tabs: a finger, finger Multi, Additional
  Go to the multi-doigt tab and disable the option called zoom.

• Satellite P500-1JD - how to disable the multimedia button panel

  I mean this Panel on the left

  http://www.etrubka.com/images/laptops/Toshiba_Satellite_P500-1EJ_PSPGSE-0XG02SRU-4.jpg

  Hello

  Do you want to disable the key lighting?
  In this case, you will need to do so in the BIOS settings.

  But if you want to disable the buttons, I have to say that this is not possible.
  I have a laptop U400 model. It supports the same buttons but above the F1 - f13 key row.
  It of possible to configure some buttons but as far as I know, you cannot disable this