F30 error on pavilion g6.

My computer shows there is no portable hard drive. .. I can't find any help on this. How can I fix

It seems that the hard drive has failed and needs to be replaced. If you are still in warranty HP will send a replacement. If this is not the case, a laptop SATA hard detail can be used. Just be sure to get a quality at least equal the original in order to use recovery disks. It may be big, but not small ability more. For example if you have a 500 GB hard drive you can use a 750 GB hard drive, but not a 320 GB hard drive.

If you need help for selection/replacement of the hdd post back with the complete model & product number as indicated on the Service tag on the bottom of the laptop.

How can I find my model number or product number

Tags: Notebooks

Similar Questions

  • HP Pavilion 500-164: the printer error HP Pavilion 500:511 - CPU fan not detected

    I have a HP Pavilion 500-164. Every time I start it, I get a 511 - CPU fan not detected error message.

    At the bottom of the screen, it says F1: Boot

    Then he begins to run smoothly. It becomes annoying.

    Examination of the aircraft, but when I find the two fans running?

    What is the problem and what I take in repairs?

    Hello

    Use a can of compressed air to clean any dust from the fans in the PC.  With the side panel, power on the PC and still observe the rotation speed of the fan.  What do you see? slow, medium, or high speed?

    Open the windows to RUN and enter: MSINFO32

    What level of your PC BIOS runs?

    Install the latest diagnostics for your PC. Start your PC and press ESC then F2 to run a diagnostic.  Run a complete set.

  • "Smart hard disk error" - HP Pavilion dv6 Notebook PC

    Hello

    I have a HP Pavilion dv6 Notebook PC, which has been meeting for the past weeks starting problems. Normally, this meant a long cycle of-->--> reboot Recovery Manager startup repair until it finally started up properly when trying to 4th/5th so far...

    Now, I get the 'Smart hard drive 301' error message. The "test drive" fails, and I am unable to start my pc.

    Thanks for your help...

    Hello

    Smart disk hard error 301 or failure id XXXXXX-XXXXXX-XXXXXX-XXXXXX indicates the disk HARD on our machine is a failure. You need to replace the HARD drive. It is still under warranry? In the affirmative, please call HP for a replacement.

    In the United States:

    http://WWW8.HP.com/us/en/contact-HP/phone-assist.html#section1

    or the HP technical support: 800-474-6836. If you do not live in the United States / Canada region please click the link below to get help from your region number.

    http://welcome.HP.com/country/W1/en/contact_us.html
        
    Kind regards.

  • Fan (90 b) system error / HP Pavilion dv7-4060us

    Hello. I have a Pavilion dv7-4060us for laptop, Windows 7 Home Premium, 64 - bit. I had an overheating problem not too long ago which caused my notebook to close on its own. I bought a cooling package to help with the overheating, which helped. But now, whenever I boot, it gives me a black screen, read "operating system has found that a cooling fan has stopped working" or something similar. The error code was 'System fan (90 b)'. How can I get rid of this error message? Post here or join my email [email protected]. Thank you.

    Since you do not live in the United States / Canada region please click the link below to get help from your region number.

    http://goo.GL/kQDB

    Take care
    Sean S

  • Error - HP Pavilion g6 portable system with Windows 7 OS

    Someone had the message appears on computer startup "APSDaemon.exe - system error", it goes on to say that the MSVCR80.dll is missing and reinstalling the program to fix? If so, what do you do to fix the problem?

    You have installed iTunes? If so uninstall before making a new installation should fix:

    http://support.Apple.com/kb/HT1923

  • Pavilion p 202nt: (rtwlane.sys) DRIVER_IRQL_NOT_LESS_OR_EQUAL ERROR HP PAVILION P202NT WİNDOWS 10 64-BIT

    Spoiler (Highlight to read)

    DRIVER_IRQL_NOT_LESS_OR_EQUAL (rtwlane.sys)
    DRIVER_IRQL_NOT_LESS_OR_EQUAL (rtwlane.sys)

    I have a problem with my pc when I use a blue screen happens and DRIVER_IRQL_NOT_LESS_OR_EQUAL (rtwlane.sys) occurs, what can I do I don't know sorry for English I Turkish

    Please click the link below to download and install the required driver to solve the problem

    http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943795&swItemId=ob_147638_1&swEnvOid=4158

    Hope this helps, for other queries in response to the post and feel free to join us again

    * Click on the white button on the right to say thank you Thumbs Up *.

    Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

    Thank you

    GBL84

    I'm not an employee of HP

  • "Can not detect 2 HDD on the system" error starting hp Pavilion G7 11002sa

    I am not able to start my laptop g7 pavilion and when I press F11 to recover from HP recovery is not allowing me to and tells me that it cannot detect hard drives on my system.

    I didn't something different on my laptop, but the last time, he displayed an error message before you start telling me there is a problem with my hard drive...  I ignored it because it still worked...

    I did not the recovery discs (thought they came in the box with Notepad) and now it doesn't let me do because it cannot detect hard drives.  Can someone help me please?

    This HARD drive went wrong if the test will not end. Replace the HARD drive, that's what needs to be done.

  • Pavilion 13 p111nrx2: Win10-upgrade, Null, Fax - HP Officejet 4630 series - error 0 x 80070490

    Win10-update, Null, Fax - HP Officejet 4630 series - error 0 x 80070490

    Every day or two, I get this Windows Update failed error (see above).

    Printer: HP 4630 all-in-one

    Computer: HP Pavilion 13 p111nrx2

    Model: E9L41UA

    Operating system: Windows 10

    64 bit

    I completely uninstalled the printer software and reinstalled and reset all my preferences in this regard.  Painful, but did not work.  Also printer keeps going offline and it is supposed to be a wireless printer.  Extremely frustrating to have a wireless printer which never seems to be wireless.

    Someone knows how can I fix the mistake of updating and/or the issue offline?

    Hello

    Thank you for using the HP Forums.

    1 start = > settings = > devices = >... . Click and REMOVE an INSTRUMENT: a) Officejet 4630 and b series) Null Fax Printer

    (2) uninstalled all components of 4630 Officejet series in the following order

    HP update

    Improvement of the product...

    Series Officejet 4630 help

    HP Officejet 4630 series based Device Software

    Law 3) clicking Start = > click on MANAGER of DEVICES = > (on my PC) printers = >... .clicked to highlight the Fax Null = > take action in the drop = > UNINSTALL

    (4) restarted my PC

    (5) installed the downloaded/saved full functionality of the HP printer

    (6) again restarted my PC, checked the DEVICE MANAGER (from selection right click Start) - FAX NULL is gone!, check the DEVICES of the SETTINGS (start = > settings), number, NULL, this time FAX - AND - the right HP Fax printer is now installed!

    (7) go ahead and look for the updates, my PC is now updated, no error should appear.

    Hope that helps!

  • Pavilion 500 - C60: new office reads, "ERROR: no boot disk was detected or the disc has failed" at startup.

    Just bought Pavilion 500 - C60, running Windows 8.1 64-bit and am doing everything on old HP running Windows Vista Home Premium SP 2. Has not gone smoothly from one thing to another, but I think everything comes together. A couple of days, began to receive the error message at startup or, if I COULD do so that it starts would go for awhile and then would get an ERROR message, requiring restart. Usually after obtaining the error message several times, the computer would then initialize. Tonight, I couldn't override the error message for anything! When you press power button / stop, I hear (HD) running for a few seconds, everything is silent, and then the error message appears on the gray screen dark in white letters, BACK very and sinister looking! Any suggestions? Had the computer about two months and it has not been easy.

    Not good!  Check all the connectors and the hard drive to make sure that they are correctly wired in place. Make sure that your cable is not reversed.

    Contact the seller if still under warranty for repair.  This could be the hard drive or motherboard and the problem lies the only diagnosis from a repair facility.

  • HP Pavilion Windows 7 error reintstall

    My laptop HP Pavilion DM3 performance soon so I decided to reinstall a Windows 7 Home Premium. About 44% in the process, when copying the files, I get an error message: Recovery Manager could not repair via the factory image. error code: 0xe0ef0003 . After that, I tested the hard drive failed: defect produces 738-XD7TGK-60SD03 ID PUNSW - 55 d VJ394EA3ABH ID.

    Hello

    I'm sorry to hear about your hard drive error.

    The error that you describe means that your hard drive is defective or failed together.

    If you¨ are lucky, yet there is little life in your player and you can remove it from your computer and bring it to a family/friend/member local computer store and ask them you try to connect as a secondary drive on their computer so that you can at least try for some of your files form back up the hard drive.

    You need to get your hands on a new hard drive.

    If your computer is still under warranty, you can get a new one form HP / dealer.

    Otherwise, you can buy one yourself.

  • HP pavilion d4790y displat a bands and error blue screen

    HP pavilion d4790y displat a scratches, then blue screen error "cannot reset the display driver and recover from timeout failed" running GEForce 7500LE w/tv, DVI output, VGA has my card that went wrong? only to start in safe mode under vista home premium CPU Intel Dou processor E6700 2.66 GHz SATA hard

    Hello

    Try another monitor and cable on your PC in order to eliminate the PC as possible problem. You can also try your monitor and cable on another PC.

    Open your PC and see if the fan on the video card.  It can be full of dust.

    If the card turns out to be defective, must you output s-video port? If so, then look at this 9500 GT from NVIDIA.

  • HP Pavilion 23 "TouchSmart: optical drive error Code 19

    Hi, the optical drive in my HP Pavilion TouchSmart 23 "does not work correctly. In Device Manager it says that it is the result of the conifguration in the registry being incomplete or damaged (error code 19), but I can't solve the problem. I tried to solve by updates driver and verification for the top and bottom filters using regedit, but none of those who were present. I can't find any other possible solutions anywhere. Thanks for the help.

    Hello:

    The only suggestion I can offer would be to go through the troubleshooting steps in the link below you haven't tried.

    https://support.Microsoft.com/en-us/KB/314060

  • HP Pavilion DV6: error disk 3F0 and hard 3F1

    Good, so I was playing my fav game, and my laptop has frozen, I decided to reboot and BOOM!

    3F1 error hard drive

    I'm curious and ran a hard drive diagnostic.
    the results are:

    CHIP: NOT INSTALLED
    DST SHORT: NOT INSTALLED

    After testing, I got error code 3F0, even after the release of the BIOS. A sound signal ends in the BIOS menu.
    On the other PC, the disc is workiing. don't know what to do. Help, please!

    _________________________________________

    MODEL: HP PAVILION DV6
    SYSTEM: WINDOWS 8.1 PRO 64-BIT
    ________________________________________

    Hi @Dawid531!

    This ID failure usually indicates that your HARD drive has failed and needs to be replaced or there is a problem with the SATA controller on the card. There is a great topic on how to resolve this error, so if you want you can take a look:

    http://h30434.www3.HP.com/T5/notebook-hardware-and-upgrade-questions/re-quot-hard-disk-3F0-BootDevice-not-found-quot-error/TD-p/5469074

    Hope this helps and let me know how it went.

  • HP Pavilion 22xw 21.5 inch IPS: HP Pavilion 22xw 21.5 "IPS LED backlit monitor products: error message driver J7Y67AA #ABA

    I got a message from my assistant HP that there are two updates that need to be downloaded. The first was for AMD GFX Driver UMA Win10 64-bit YANICK

    I downloaded and installed, but now when I go into the settings, it is said "Screen backlight HP Pavilion driver error 22xw"

    However, my monitor seems to work very well? Don't know what to do with this message

    Thank you for any input!
    Susan untechie computer user

    Thank you very much for your answer, I'll put this link!
    However, that night that my computer has made an update of windows 10 and apparently solved the problem, this error message has disappeared... Now, that's service, lol.

  • HP Pavilion x 2 Tablet 210: hard reset on my laptop, error and now my phone is in a constant reboot State.

    My laptop is running slow so I thought I would do a hard reset because I had not all the important files on this subject. So I reset it and I got a blue screen error, then a screen of the list with a popup box saying there was an error or my computer restarted and I have to press OK to install. I found an online solution to go beyond the popup box, I don't remember what it was, but now my laptop is stuck in a State of constant restarting. It goes like this:
    Blue HP logo with loading circle
    Black screen,
    Blue HP logo,
    Installing and configuring Windows install screen that didn't move out of 64%.
    And then black screen. This process is repeated constantly.
    Help, please.

    Hello @kirsty_mcq17,

    Welcome to the HP support community! I understand that your PC Pavilion x 2 is stuck in an endless loop, after trying to reset it.

    You can start by trying a full reset on the system and testing of hardware failures.

    If the system is still stuck in the loop, you may be able to follow the steps to perform a recovery when 10 Windows does not successfully start.

    If you do not have a separate for Windows 10 drive, you can create a Microsoft recovery media and attempt to restore the system or start from that instead of the hard drive.

    Please get back to me how that happens. Please click on the Thumbs up below to thank me for my efforts!

    Thank you!

Maybe you are looking for