F3F04AA: This GPU would work for my diet?

Similar Questions

• I have a current subscription and valid for my laptop and still, this won't work for me?  Do I need to register with a serial number? and it is limited to a PC in my house?

  I have a current subscription and valid for my laptop and still, this won't work for me?  Do I need to register with a serial number? and it is limited to a PC in my house?

  Hi randyb71782130,

  Acrobat can be installed on 2 computers, but it can be activated on a computer at a given time.

  You have the subscription if you do not require a serial key, it will be activated using the Adobe ID once you connect.

  Now just let me know the cause, you try to activate Acrobat on your second system?

  What is the error code or exact error you receive?

  Kind regards

  Nicos

• Is - this command D2CurveSpecOffs working for a graphic bar in DIAdem 11.0?

  Hello

  I have a difficulty to get the command D2CurveSpecOffs works for my custom vertical bar graph (histogram).  I'm opening and closing of the objectnames very well, since I can adjust other aspects of the graph.  As I understand it, D2CurveSpecOffs allows me to compensate for the vertical bar on the left to the right relative to the value it represents on the x-axis?  Right now, it seems that the bar is centered on the value of x.  But because each bar in my bar chart represents a different range, i.e. of the counts of 0.25 to 0.5 = 1000, I would that the right edge of the bar to align with 0.5 (0.5 aligns with 1000 as the x-axis channels & y axis), to my knowledge, maybe I should put the D2CurveSpecOffs = 100 or - 100, etc..

  Example of 2 channels:

  (Ch1) Counts, values (Ch2)

  0.25, 1200

  0.5, 1000

  1, 125

  2: 13

  etc.

  Maybe I'm not completely understand what D2CurveSpecOffs allows me to do.  I'd appreciate your comments.

  -GvG

  GvG,

  D2CurveSpecOffs does not allow to specify the offset of percentage on the x-axis for bar charts. You can see the photos, I enclose below before and after. I would recommend that you change the offset manually in the report and then with the parameters of the curves window, press Ctrl + A, this will copy your settings, and you can then go into your script file and press Ctrl + V to paste the settings changed by your name of graph and the curve already filled. It seems that the value that you specify with Offset is used in conjunction with the bar width to calculate its final position, so, even if you leave the shift even change the width, your bars will move.

• This configuration will work for CS5.5?

  This Dell will work? Intel i7-2600? 16 GB dual channel SRFI SDRAM at 1333 Mhz, nvidea geforce gt530? Want to buy Production Premium, but have little budget, do not need top of the line computer performance, just realistic... Any advice greatly appreciated. (I couldn't find in the tech specs what video cards are supported). Also seeks to Canon XF 100, I think that it is supported by CS5.5, right?

  GT 530 he cut very thin. Better use a GTX 560 Ti, or best. Use at least three 7200 SATA disks. And Yes, the XF series is fully supported. Check out the Adobe Forums : which PC to build? An update...

• This SSD would work in my laptop?

  I plan to upgrade my laptop (DM4-1160US) with an SSD, a samsung 840 evo (250 GB) would be compatible with the laptop? If it doesn't work, can you please recommend me one that would be compatible.

  That's exactly the one to get. This is what I have in my own laptop (but the 512 GB version for me).

• It would work for a WLAN internet access?

  Hi, everyone, I have a few questions about how to implement public access to Internet in our workplace that would not allow access to our local network.  We have several access points 2702 and 2504 WLAN controller.  Two of the four interfaces on the 2504 have intellectual property in the ranks of our LAN subnets.  I assigned a VLAN for public access to the Internet, but do not know how I would implement on our infrastructure past.  Instead, I was thinking about a cable connected to one of the unused interfaces on the 2504 to a port on our DMZ switch and having traffic for the public Internet, out across the demilitarized zone.  If I had to do this way, but also created a scope DHCP for the public Internet, and the DHCP scope were on an interface that had an address on the local corporate network, customers would always get the address?  What is the best way to do it?

  A second question I have is about how the traffic between the access points and the controller is managed.  When a client connects to the access point, their traffic get dug to the controller and then thrown on the LAN, or the traffic goes to the local network directly from the access point?  The reason why I ask is that we have a remote office that we would like to manage the access point of the controller in the Office at home, but we do not want necessarily all their traffic going back or the office, if it was intended for office network at home, or if it is intended for the Internet.  The remote desktop has its own local internet connection and is just VPN'ing to the desktop at home for internal network traffic.  DHCP for clients at the remote office is managed by a DHCP server on the router on this effect.  A remote desktop access point connected to the controller in the head office would be able to use the DHCP server on the router to the remote desktop?  I test that out in a lab environment and I couldn't get it to work this way.  Remote desktop access point is currently running in mode independent and done a good job.  In the future, this site will also get on our MPLS and finally all traffic going to get dug towards the Home Office, including Internet access, so perhaps at that time, attach the remote AP to the controller would be better.

  Thank you!

   A second question I have is regarding to how traffic is handled between the access points and the controller. When a client connects to the access point, does their traffic get tunnelled to the controller and then dumped onto the LAN, or does the traffic go to the LAN directly from the access point? 

  In local mode APs switch always centralized traffic, that is to say CAPWAP tunnel established between AP & WLC. If all traffic comments terminate at WLC connected switch.

  In your case, if you map the traffic comments-SSID to the physical port connects to the DMZ switch, guest SSID users end traffic to DMZ switch. You must ensure that traffic vlan is not go on any other connected WLC trunk ports.

  If AP mode FlexConnect, then traffic will end at the switch where AP connected locally.

  HTH

  Rasika

  Pls note all useful responses *.

• "my desktop widget weather stopped working this morning, had worked for about 8 months, now it says" card not found ".

  The weather widget loaded every day for about 8 months, this morning, it has not loaded, I pulled the top of the list of widgets and once again chose the time, but now when I say that it seek to Hereford, AZ it tells me "card not found".

  WHY?

  Randerson

  Research of the question and you will get multiple threads.  In other words look for. "

  Desktop Weather widget has stopped working, location not found"either here or on Google

• Kinect for Xbox 360 would work for someone in a wheelchair?

  My daughter is in a wheelchair and we would like to buy an Xbox 360 with the Kinect system.  I want to assure you that it would be able to use the game system as well without getting lose points because she is in a wheelchair.  She is able to move above the waist.  The Kinect scan his wheelchair and display it on the game system because it is the controller? I want the best system for everyone, and I want it to feel included.

  Hi Kathy,

  Thanks for posting your question in the Microsoft answers Forum. Any questions on XBOX, please visit the following link:

  http://support.Xbox.com/en-us/

• How this code would work?

  Hello

  I have this code in a form and it works correctly, I do not know how? because I tried after you modify, delete the quotation marks and parentheses, it does not.

  SET_BLOCK_PROPERTY (NVL ' of the 'TTO_TICKETTRAVELORDERDETAILS, DEFAULT_WHERE,' (STATUS, "$$ # & & & &") = NVL ("' |: CONTROL.)) STATUS | " (', NVL (STATUS, "$$ # & & & &"))

  AND IS_TOUR = "N"

  AND EXISTS (SELECT "X"

  OF TTO_ORDERDETAILSROUTES T

  WHERE T.ORDERDETAILID = TTO_TICKETTRAVELORDERDETAILS. ORDERDETAILID

  AND NVL(CARRIER,''$$##'') = NVL ("' |: CONTROL.) CARRIER: "', NVL(CARRIER,''$$##''))

  AND NVL (CLASS, "$$ & &") = NVL ("' |: CONTROL.) CLASS | " ((', NVL (CLASS, "$$ & &")))

  AND EXISTS (SELECT "X"

  OF TTO_TICKETTRAVELORDERHEADER H

  WHERE H.ORDERID = TTO_TICKETTRAVELORDERDETAILS. ORDERID

  AND STATUS = "Post")

  AND EXISTS (SELECT "X"

  OF TTO_TICKETTRAVELORDERHEADER H

  WHERE H.ORDERID = TTO_TICKETTRAVELORDERDETAILS. ORDERID

  AND TO_CHAR(ORDERDATE,''DD-MM-YYYY'') BETWEEN NVL ("' |: CONTROL.) FROM_DATE | " (', ORDERDATE) AND NVL ("' |: CONTROL.) TO_DATE | " (', ORDERDATE)

  AND NVL(H.CUSTOMER_NO,''$$##@@@'') = NVL ("' |: CONTROL.) CUSTOMER_NO: "', NVL(H.CUSTOMER_NO,''$$##@@@'')))');

  After editing it and try in the pl/sql developer, he could not identify the TTO_TICKETTRAVELORDERDETAILS. ORDERID

  and TTO_TICKETTRAVELORDERDETAILS. ORDERDETAILID

  in the condition "Exists".

  SELECT

  t.*,

  t.ROWID

  Of

  TTO_TICKETTRAVELORDERDETAILS t

  WHERE

  NVL (STATUS,' $$ # & & & &') = NVL (", NVL (STATUS,' $$ # & & & &'))

  AND IS_TOUR = N

  AND THERE ARE

  (

  SELECT

  « X »

  Of

  TTO_ORDERDETAILSROUTES T

  WHERE

  T.ORDERDETAILID = TTO_TICKETTRAVELORDERDETAILS. ORDERID

  AND NVL(CARRIER,'$$##') = NVL (", NVL(CARRIER,'$$##'))

  AND NVL (CLASS,' $$ & &') = NVL (", NVL (CLASS,' $$ & &'))

  )

  AND THERE ARE

  (

  SELECT

  « X »

  Of

  TTO_TICKETTRAVELORDERHEADER H

  WHERE

  H.ORDERID = TTO_TICKETTRAVELORDERDETAILS. ORDERID

  AND STATE = 'Post'

  )

  AND THERE ARE

  (

  SELECT

  « X »

  Of

  TTO_TICKETTRAVELORDERHEADER H

  WHERE

  H.ORDERID = T.TTO_TICKETTRAVELORDERDETAILS. ORDERID

  AND ORDERDATE BETWEEN NVL('',ORDERDATE) AND NVL('',ORDERDATE)

  AND NVL(H.CUSTOMER_NO,'$$##@@@') = NVL (", NVL(H.CUSTOMER_NO,'$$##@@@')));

  Why?

  If you do not give the table in the outer query an alias then you reference with the full name.

  3. ??

• This card would work in my X 51? (link and specifications in the comments)

  I was wondering if my alienware x 51 gtx555 i7 would go well with the ti of gtx660 EVGA.

  

  Yes your system will work the 660ti very well.

  You got to get the fan fan style (like the one on the picture)

• The Lenovo digitizer pen works for my Lenovo Yoga 15 500?

  Hello world!

  I think to buy the pen digitizer of Lenovo laptop ThinkPad Yoga, that should work for the ThinkPad of Yoga series, but this pen would work for my Lenovo Yoga 15 500? I don't know anything about the difference between the Yoga / portable and I fear that my model is perhaps not compatible with the Interactive Pen (or would not give as much precision in the sensitivity to the touch).

  Thanks for your advice :-)!

  As the Yoga 15 500 media focused on the EMR Wacom pens or pens based on AES of Wacom, your only option is a capacitive pen that works in the same way as your finger.

• This driver works for DJ 1050c (or 105Xcx) in Windows 10 x 64?

  In Windows, 10 x 64, I guess the Win XP or Vista x 64 driver works for the 105Xcx, but I'm not 100%. T it? I know that this seems to work for Win 7 and 8.1.  This driver is called: hpdj1000wx64glen.exe

  And are there tricks to make it work if so? I know that there may be 'signed' driver problem or "checked"... I usually F8 on startup and make the right choice.

  Thank you.

  Paul

  Windows XP 64-bit "hpdj1000wx64glen.exe" driver seems to work correctly in Windows 10 64-bit for the DesignJet 1050c and 1055 CM - hp-gl/2 driver 64 bits. I didn't have to substitute or to defeat the driver requirement "signed". The pilot was "signed" by Windows 10.

  I printed only pdf files. A bit slow in color in the 'normal' setting print detail color card printing but "fast draft" seemed fast enough and looked acceptable color well obviously lighter.

  The 64-bit XP driver I have is version 4.91.0.0.

• Portege R600-140: message says: device would work better with USB 2.0

  R600-140 win 7 prof
  I plug in a device of capture usb video and a popup appears saying (roughly)

  + This device would work better with USB 2.0 - Click here for a list of usb ports.

  I thought all the usb ports 2.
  I just checked the drivers in the Panel, and I thought they are all up to date.

  The laptop supports without a doubt USB 2.0 ports.
  I guess that this message can appear for many reasons: for example the USB device malfunction.
  Also the problem of USB port could be responsible for such error.

  So as the first workaround I recommend you remove the USB hubs and controllers in the Device Manager list.
  Open the Device Manager, look for the controllers and USB hubs and uninstall the driver.
  Reboot the laptop

  Usually the system will begin to recognize USB devices.

  Note: during this procedure, all external USB devices must be disconencted

• software that would work Windows media player.to stop an error reacurring.ie cannot read the file the player does not support the file ect

  • If we had a software incorporated into our windows media player that could convert all formats in SGF format which media player works with.and would give the correct codec, seeking a new kind of film because we wouldn't not error of windows media player cannot play the file the player might not support the file type or is unable to support the codec used to compress the file.i know it y has many converters of FOSS by there .but why is it not incorporated into the windows media player 11 to make it the best player support ever.you must know of software that will do all this .and would work with media player 11. Please if you know an update that would do this please please write me on * address email is removed from the privacy * waiting for your reply thank you

  Hi bbdunford,

  There is nothing of MS that does this, but this codec pack will work just fine: http://download.cnet.com/Media-Player-Codec-Pack/3000-13632_4-10749065.html?tag=mncol

• This card will work?

  I was thinking about an update on my HP G5120uk desktop PC. And I was wondering if this card would work on my computer?

  The map I was looking at was a

  ASUS GeForce GTX 560 810 MHz 1 GB DirectCU PCI-Express HDMI

  Hello

  I am pleased that you measured for this card. I hope that the radiator of the map is low enough for the card to fit.

  Try the Corsair CX500.