F4180

Similar Questions

• Uninstalling HP F4180 - Op sys = VISTA Home Premium

  I just replaced my HP F4180 all-in-one printer with printer all-in-one HP Envy 114.  Given that I need is no longer the F4180 driver/software I want to uninstall it. Does anyone know if the F4180 and the envy share the same software, which would be eliminated naturally in the uninstall process and thus to cause me pain with my desire?

  Thanks for any help.

  Hello SKYPILOT07,

  Fortunately, you can uninstall the software HP F4180 because it does NOT share anything with the HP ENVY 114.

  Kind regards

  Jabzi

• HP F4180 how to disable a scan more in several images

  Hi all

  I have a F4180 all-in-one running Windows 7 64 bit. I'm analysing some impressions that lent me one of his classmates, but my HP keeps their images sepparate cutting (and do a terrible job of it). All I want is a scan of the entire page.

  I think it's a problem with the function of multi-image scanning. Anyone know how to disable the analysis of multiple images?

  In the future please do not 'bump' messages or use the private messaging, both are bad etiquette.

  Assuming you are using the HP Solution Center to scan, click scan settings, advanced imaging, and then check the selection to "scan multiple photos into a single file.

  

• HP Deskjet F4180 prints very, very slowly. -one line about every 15 seconds.

  Product name & number: HP Deskjet F4180

  Operating system: Windows 7 64-bit

  no error message

  No changes were made to the system

  No problem.

• HP Deskjet F4180 ceased to print

  Original title: My HP Deskjet F4180 stopped printing, why? New ink!

  My HP Deskjet F4180 printer stopped printing lately. Since last week, he stopped

  printing for unknown reason. I put new ink cartridge, yet. Plugged and unplugged, checked all

  the instructions in the help, but it just does not print. Notepad does not either print. Why?

  Please help; I'm desperate!

  Hello

  (1) what exactly happens when you try to print?

  (2) you get any error message?

  (3) what operating system is installed on the computer?

  I would say to you to follow the steps provided and an update on the State of the question.

  Printer in Windows problems: http://windows.microsoft.com/en-us/windows/help/printer-problems-in-windows

  HP Deskjet F4180 all-in - One Printer Troubleshooting: http://h10025.www1.hp.com/ewfrf/wc/documentSubCategory?tmp_task=solveCategory&cc=us&dlc=en&lc=en&product=3177566

  For all windows questions do not hesitate to contact us and we will be happy to help you.

• Printer all-in-one HP F4180: automatic detection detects bad printer

  The auto detection detects my HP F4180 all-in-one printer as an all-in-one printer from HP F4190 and ask me to update the drivers. I have downloaded and has been updated several times, but always get the same answer.

  Max,

  Welcome to the Community Forum of HP.

  Well, Auto-Detect certainly does not work for your printer very well.

  You can work around the problem:

  HP Deskjet F4180 all-in-one printer drivers

  Comment

  The problem with the Auto-quelque thing is that it works for almost everyone - except for those for whom it is not.  Good program: not perfect.

  Workaround

  You can manually download and install everything you need your printer Support pages.

  If I were you, I download and keep a complete copy of the typical software - and the 'critical updates that apply to my situation.  Have a copy of the software on your own computer and backups can save time disorder later if necessary you need data.

  You can also keep the pages to my favorites for future reference if needed later.

  Click on the Thumbs - Up Kudos to show that you appreciate the help.

  I am happy to provide assistance on behalf of HP. I do not work for HP.

  Click on accept as Solution when the answer provides a fix or a workaround!

• HP deskjet f4180: hp deskjet f4180 windows 10 problem - bad impression

  Hi, my f4180 pritner works well with win 8.1. But I could not find win10 driver for my printer. And with windows 10 very bad impression.

  Earn 8.1

  http://i.imgur.com/Nsy2Bfv.jpg

  

  win 10

  http://i.imgur.com/K0bNIhH.jpg

  

  Because of this I went back to win 8.1. When win10 pilot going out for my printer.

  Edit: I think that the image does not appear. I've added the link direct imgur.

  I solved the problem for now. I installed virtual windows 7 with virtualbox on windows 10. I use virtual win7 when I use pritner. Thanks for your help. Kind regards.

• F4180 does not save the scans

  My F4180 used with OSX 10.9.2 ceased to give me the scans I can save.  It seems that it is scanning normally, then when I go to save it saves a document in all the black boxes and says to check that it is not set to read-only.

  Ideas?

  Hello sensho.

  Welcome to the Forums of HP Support! I understand since the upgrade for the Mavericks 10.9 OS X, you are now no longer able to save documents or images when your HP Deskjet F4180 scanning.

  Please make sure that you have installed the driver correctly uses the Apple updates: OS X v10.9 Mavericks: installing and using the printer on a Mac, keep in mind that because there is no comprehensive software features and drivers for your F4180, you might need to analyze in different ways you did before you installed the Mavericks.

  I would also like to take a look here: how Scan: OS X v10.9

  I hope this helps, if you have any further questions please do not hesitate to ask.

  Thank you

• #56 cartridge fit F4180 printer?

  I bought my ink HP power online, entering my printer and buying what are recommended.  HP this offer does not show as an option for my printer, F4180, 56 and I can not get 56 to work in my printer.  What is 56 is the wrong cartridge or is it something else?

  Hello

  For all regions. Your printer is not on the list:

  

  BUT theey has different as code indicated on the following link:

  http://support.HP.com/us-en/document/bpa02093

  Kind regards.

• How to network a deskjet F4180

  I have a HP Deskjet all-in - One F4180, and I would like to connect it to my router for use on a PC network (a laptop and a desktop - both with wireless capabilities).  While the PC are not directly connected to the router, the printer could be if necessary.  However, I don't think that this printer is network ready (there are no Ethernet card or the printer port), and I do not know how to proceed.  Is a network required for the printer server, or is there a cable that can connect the printer directly to the router via the USB port.  Please excuse my ignorance: it's the first time I tried to set up a home network.  Thank you.

  Often these USB ports are supported USB hard drives, not printers.  Check the manual for your router, but I doubt that it is set up for printing.

• Impossible to copy and scan on all-in-one printer, HP Deskjet F4180.

  I can't make a copy and scan on the surface of the glass of my printer HP deskjet F4180 all-in-one. The printer says: error in the copy menu and seeing red flashes on color and black. However, I am able to print from my laptop and a pop-up message would be in my laptop showing the ink cartridges (black and color) are placed incorrectly. Check the ink cartridges, both are in their right place and broken up. Need help... Please.

  I found this document which decodes what mean flashing lights.  There are a lot of different codes described, but I found a heading "question: one or two of the lights blink check print cartridge" which seems to be what's going on your printer.  Basically it's saying that the cartridges are out of alignment or defective.  If the document is not help clarify, let me know and I'll see what I can find.

• HP Deskjet F4180 print photos with a purple hue across

  Hi all, I was hoping that someone can help me. Our HP Deskjet F4180 is printing pictures with a purple tint (usually something in, like a coffee table or wood panelling, comes out magenta-y).

  I tried troubleshooting it myself and it seems there is no problem with the printer cartridge, or the program that I am printing.

  Here is what I tried:

  -current color cartridge replacement with a new one; problem persists

  -cleaning of the cartridge through the HP Solution Center (he asked me to clean, then intermediate clean, then first; tried all three, and the problem still persists)

  -print the photo of Microsoft Office Picture Manager and Microsoft Word

  -change the color balance (I value Magenta - 25; still did not help)

  This problem started after I printed 60 wine labels, which all had purple graphic and black text on them... but I think a lot of printing of purple would cause the printer having less purple coming out, no more...

  Any ideas what the problem may be? I have included a link below to the images show what that is the problem - the first image is how the picture should look like, the second is an analysis of the image printed super-purply (which, moreover, is printed on ordinary printer paper white old).

  http://S1044.Photobucket.com/albums/b447/cappa_j/HP%20Deskjet%20F4180%20error/

  Hi Ciara B,

  I had the intention to get back to you with some comments - thanks for your help! I tried the last steps, you suggested, except to repair, which is what I wanted to avoid .

  I found a solution to the problem though - I completely uninstalled the printer from my computer, then insta. Ed again and it works perfectly! Don't know what the problem is, but reinstall all fixed.

  Thanks again!

• install hp deskjet F4180

  I use Deskjet F4180 2 years with W7.

  The week last W7 has been updated with heavy upgrades.

  Since then the scanner HP F4180 did not work.

  I tried to uninstall and reinstall the driver (downloaded from the HP site), but I got the message "Cannot access the system registry key" - register HKEY_LOCAL MACHIN\SYSTEM

  My system has now no printer and scanner and I do not know how to proceed.

  Hi marcosogliani,

  Thank you for sending me the results in the product Monograph.

  Sorry test registry and to rerun the installation as that administrator does not solve the problem.

  The question is releated full administrator rights on the computer.

  Create a new user account to see if that is causing the problem.

  Create a user account.

  Then follow the steps described in this document.

  Windows: A 'fatal error' Message is displayed on the computer to 96% of the Installation of the HP software.

  Do not take into account the title.

  Go to Solution 2: change the Hard Drive parameters of security, step two, three and four.

  Try to run the installation again.

  It's in an office or at home?

  You have a COMPUTER service? (make them check the permissions on this computer)

  Thank you.

• I can't install the driver for Deskjet F4180 with Yosemite

  Hello

  I try to install my Deskjet F4180 on Yosemite following instructions in http://support.hp.com/us-en/document/c04488851 but when I plug in usb print queue is not created automatically and the printer software is not installed automatically.

  Then I try clicking + option and I get the answer, you can see in the picture: there is no software available for this printer in Apple. Get in touch with the manufacturer of the printer...

  

  If I drop the list next to the Option "use":

  

  Can you help me please?

  Thank you

  Ok

  Try to install the software manually and check to see if that can help you:

  First, fix the permissions of the drive to avoid any possible problem:

  1. open the Applications folder.
  2. go to the Utilities folder.
  3. double-click on disk utility.
  4 Select the hard disk that contains the boot volume.
  5. go to the first aid tab and select Repair disk permissions.
  Note: This process may take several minutes depending on the Mac and the amount of the permissions that need to be repaired. The progress log shows when the process was completed.

  Now, download and install the package below, try chicken add the printer again:

  http://support.Apple.com/kb/dl907

  Shlomi

• Possible to scan in pdf on F4180 all-in-one?

  My F4180 all-in-one scan/save docs as .pdf - it isn't a choice in the drop-down list. I need jpeg. My printer should do, or do I need a software more to translate?  I have HP laptop with Windows XP.

  Thanks in advance.

  ECE

  Hi ECE.

  Your printer software provide PDF, analytical skills.

  In my view, that the OCR software is not installed, which depends on the PDF.

  Please, try the following steps and let me know if this is useful:

  1. Insert the printer installation CD.
  2. Click on install the additional software.
  3. Be sure to select the Iris OCR reading program and complete the installation.

  You should see the available PDF option.

  If you do not have the original CD, you can download the full software and follow the same directions:

  http://ftp.HP.com/pub/softlib/software10/COL18547/al-64285-2/DJ_AIO_NonNetwork_ENU_NB.exe

  Kind regards

  Shlomi

• F4180 do not print in color (even if it does not print in color test page)

  Whenever I try to print anything from a Web page or save the file, it only prints in black and white. I did the color test page (holding the button cancel and hit then start color copy), and the colors printed correctly.

  I always see color/black and white of preferences and make sure the color is selected. It continues to print only in black and white so.

  Welcome to the Forums of HP redwing634,

  I read your message which indicates that the printer does not print in color from the computer, but it will print the color on the material test page. I can help you with this.

  Try the following steps to see if it will solve the problem.

  More troubleshooting when the self-test Page has no flaws.

  Download and run the Print and Scan doctor. It will diagnose the problem and could solve it automatically.

  Find and fix common printer problems using the HP for Windows diagnostic tools?

  Try printing the paint to see if you have the same results. How to use Microsoft Paint.

  If you are still not able to print in color, the pilot may have been damaged. I uninstall and reinstall the printer software.

  Uninstalling the printer software.

  HP Deskjet F4180 all-in-One Printer Drivers.

  Select your operating system, click Next and click on the software to download and install.

  What operating system do you use? How to find the Windows Edition and the Version on your computer.

  How is the printer connected? (USB, Ethernet, WiFi)

  If you need help, let me know.

  Have a wonderful day!
  Thank you.