F8 doesn't work only on the page on the WIndows XP installation license agreement

Similar Questions

• 'Action' between pages doesn't work only in the deployment

  I have two pages in my application, connected by an action defined in adfc-config. The link works fine when I run my application locally, but when I deploy it to a remote Weblogic Server, it doesn't work. (The URL which is supposed to link to another page just links to the same page.) How you may?

  Hello

  Make sure that you start the application referencing the viewId in the controller and not the physical file. For example http://Host/j22context/visages/myview and not http://host:port/j22context/faces/myview.jspx

  Frank

• BlackBerry Smartphones E-mail password doesn't work only on the BB?

  BlackBerry Tour Guard gives me error for my email password is wrong, I'm having the problem now with my hotmail email on my BB yesterday.  I tried to remove my battery, I got like 30 + times, I even deleted the email from my phone.  Now, I can not add, he repeats to me that it is an invalid password and it cannot validate and communicate with hotmail.com.  I even changed my password on hotmail.com, I just connected my Hotmail on the computer with the same password, the same one that won't take my BB.  When I put my password on the email settings page, it says "processing, please wait...". "Then I get this error"address incorrect email or password. Check your email address and password.  If the error persists, contact hotmail.com. "I have other email accounts on my phone that work very well.

  I hate to say, but give it several hours or later today and try to add the account back to the BIS then.

  I don't know why it does not now, but I have seen before not working and then mysteriously later.

• Stop(); doesn't work only in the export of AIR for Flash CS5.5 iOS

  Hey there I tried to make a simple animation of Flash CS5.5 5 images each with a stop(); action but when read on the iPad the aniamtion does not, stop it scroll 5 frameworks rather than stop at frame 1.

  A reason why this is happening?

  Looks like it was a memory problem with the jvm.ini file.

  Inflated it to 256 and it works now.

  Hope this helps someone else in the future if they come across it.

  Thank you.

• icloud entity synch doesn't work only with the iPhone

  Today, I've changed Outlook IMAP instead of POP3 to access my mail from time warner.    I set up the new e-mail, left my messages from the account to the imap account pop3 and mail on the iPhone now syncs with Outlook exactly as I expect.

  However, I sync my calendar outlook and contacts through the Icloud.  Now, when I add a new event calendar or contacts on outlook, it syncs just fine on my iPhone.  However, when I add/remove events from the calendar or contacts on my iPhone it does not sync with Outlook upward.

  I hunted around and found that no help on this - so any help on what I need to change to get the iPhone for calendar updates and synchronization to Outlook contacts would be appreciated.

  IPhone 6 - IOA 9.3.1

  Windows 10-2013 Outlook

  Thank you

  Mark

  Hey markfrommatthews,

  I understand that you run in some issues with your ability to synchronize the information to iCloud to Outlook. Here is an article that will provide some steps of troubleshooting for you:

  Get help using Outlook with iCloud for Windows - Apple Support

  https://support.Apple.com/en-us/HT204571

  Thank you for using communities Support from Apple!

• NEITHER Spy works only in the development environment?

  NEITHER Spy works on LabView (executables) stand-alone applications deployed (using VISA vi), or NI Spy works only in the development environment? It might be useful for debugging of deployed applications.

  If the answer is Yes (which I doubt), OR would have to create an installer for it since currently it is no longer available as an add-on.

  Thank you

  Ed

  Edjsch,

  You can install VISA as a standalone w/o LabVIEW. Spy is not a stand-alone installer because it does nothing in itself. That's why we always package it with a driver or application software.

• Printer works only after the reboot or shutdown

  I use win xp sp3 computer. My only works only after the restart or shutdown. If I reinstall the printer driver, then it will work. I have reinstall win xp but similer happen again. I scanned my system with kaspersky. But no change. I need a permanent solution. Please help me...

  Hi Pierre,.

  1. what exactly happens when you try to use the printer?

  2. you receive messages or error codes?

  3. What is the brand and model of your printer?

  Method 1:

  You can try to start the fixit printer and check if it helps:

  Diagnose and automatically fix problems printing and printer

  Also see the article and check:

  Resources for the resolution of the printer in Windows XP problems

  Method 2:

  You can check the event viewer to learn more about the problem.

  Procedure to view and manage event logs in Event Viewer in Windows XP

• Hi all. How can I manage the preferences that LR do not take up space on my MAC hard drive and works only on the external hard drive?

  Hi all. I am new and on a free trial right now.

  How can I manage the preferences that LR do not take up space on my MAC hard drive and works only on the external hard drive?

  Monthly payment included cloud storage?

  Peut I manage backups? And how?

  
  

  -Amir
  

  Hi amireos,

  Yes, you can create your workflow where you can keep all your images on the external hard drive and the Lightroom catalog file as well.

  If you start with Lightroom and then use the Destination location as external hard drive when you import your image of the external source such as a camera or SD.

  If you already have your Images on the Mac HD drive, then play all your Image on the external hard drive first and then import images directly from there.

  Finally, you can change the location of the Lightroom Catalog as well.

  Default location: folder on the Mac Drive HD, there is folder called Lightroom that you can move on the external drive too (however catalog Lightroom can't memory space as its only import previews of the images is not the real image and full)

  Once you move the file catalog Lightroom external hard disk, then you need to browse the catalog file when you launch Lightroom only once.

  See thread: LR catalog moving on external hard drive

  Let us know if it helps.

  Kind regards

  ~ Mohit

• Where can I get a copy of the Windows XP installation for my sister. His was a virus and I had to format the drive. It's a registered computer

  Where can I get a copy of the Windows XP installation for my sister. His was a virus and I had to format the drive. It's a registered computer. I have it ready for the operating system but I need to download a copy so I can retrieve my CD-ROM/DVD-Rom drive, so I can then bring to its system and reinstall the XP and then if she wants that we can get a windows 8. I use windows 8 on this system, I bought a few months ago and it's satisfying, but I don't understand why when I got it I could do things like using the keyboard of the screen with my fingers, but now I can't even use the keyboard mouse. It won't work at all. In a way I found it better that way at the beginning because I do a lot of typing and it would freeze until I was constantly stressed. I returned to Windows 7 mode I think but not sure.  All I know is that these two things have never worked correctly, so if they are still under warranty I will bring to the Future Shop and maybe they can fix it. I wish I could turn on and off easily so it does not interfere with my writing and study of a language second.

  Ralph Sabean

  E-mail address is removed from the privacy *.

  or * address email is removed from the privacy *

  There is no legal download of XP unless a TechNet or MSDN subscription. I'm sorry.

• Cannot complete the Windows XP installation.

  After a problem started that I could not fix,

  I formatted the drive C. Unfortunately, I then started to install windows xp on a disk that I don't have the correct product code. Therefore, I can't past the Setup screen to halfway. Now I have the correct windows xp disc with the product code, but cannot re - format the drive to start a new installation. Any help would be welcome. Thank you

  Hi KENNETHCAMPBELLST,

  • What happens when you try to reformat the drive using the good Windows XP CD?

  The only option is to start the Windows XP installation by using the correct CD and format the drive when you are prompted.

  How to install or upgrade to Windows XP

  http://support.Microsoft.com/kb/978307

• Vista SP2 does not updated Windows because the Windows Modules Installer (Trustedinstaller.exe) crashing

  Hello.
  My laptop Vista SP2 does not have Windows updates due to the Windows Modules Installer (Trustedinstaller.exe) crashing:

  Error message:
  "Signing of the problem:
  Problem event name: APPCRASH
  Application name: TrustedInstaller.exe
  Application version: 6.0.6002.18005
  Application timestamp: 49e01af1
  Fault Module name: wcp.dll
  Fault Module Version: 6.0.6002.18005
  Timestamp of Module error: 49e0380e
  Exception code: 80000003
  Exception offset: 0013b 972
  OS version: 6.0.6002.2.2.0.768.2
  Locale ID: 2057
  Additional information 1: fcbe
  More information 2: 21dec0ca93c87c4af4036e2c4a4d224a
  3 more information: 93a 4
  "Additional information 4: 172cbe47bfd87945783d7b08d7f02897.

  Update history shows a number of updates that haved 'impossible' to install accordingly.
  Any ideas how to solve this problem for all my PC install Windows updates pending?

  Thank you very much!

  Hi Spoon579,

  Jose is correct that we need more information. Without any information only generic suggestions that we can supply to run SFC/scannow here or CheckSUR here

• How can I boot from the Windows 7 Installation CD so that I can reformat the hard drive before reinstalling Windows 7?

  How can I boot from the Windows 7 Installation CD so that I can reformat the hard drive before reinstalling Windows 7?  I have already reinstalled Windows 7 from the CD, but that has not solved my problems.  When I put the factory CD in my CD player, it won't always boot from the CD.  When I put my Windows 7 Ultimate CD in the CD drive, it doesn't always start from the CD.         I realize that the reformatting is not always necessary, but I caught a few viruses (despite anti-virus running) and I need to start with a clean hard drive.

  On Friday, January 9, 2015 14:30:32 + 0000, BlueKodak wrote:

  How can I boot from the Windows 7 Installation CD so that I can reformat the hard drive before reinstalling Windows 7?  I have already reinstalled Windows 7 from the CD, but that has not solved my problems.  When I put the factory CD in my CD player, it won't always boot from the CD.  When I put my Windows 7 Ultimate CD in the CD drive, it doesn't always start from the CD.

  You must go into the BIOS and change the boot on CD order
  first push.

  How to get into your BIOS? It is not dependent on Windows, but on what he
  motherboard/BIOS card that you have. In fact, you need access to the
  BIOS before Windows begins to start. A common method is to press
  the key delete when you turn on first, but this is not necessarily true
  for your computer. Watch the display carefully when you start first;
  There is often a message here to tell you what to do. If this is not the case, check
  your system documentation or check with your provider.

• In order to become a distributor of volume Adobe Reader, (my computers have no internet access), I need to fill out the Distribution of Volume License Agreement, but will not accept an answer I gave to the question: "Please indicate the product or service

  In order to become a distributor of volume Adobe Reader, (my computers have no internet access), I need to fill out the Distribution of Volume License Agreement, but will not accept an answer I gave to the question: "Please indicate the product or service name and description.

  This form must be completed and submitted online. Also the browser Javascript must be activated.

  https://distribute.Adobe.com/mmForm/index.cfm?name=distribution_form&PV=RDR

• Field containing average function works only when the data are engaged on the same page. Does not work for fields on other pages.

  I'm having a problem with a field defined to calculate the average of eleven points fields (points 1 to 8 on page 1-9-11 on page 2). My original question was that it could exclude fields of points when they do not have information entered and adjust the average calculation (number of "divided by") accordingly.

  I had someone write JavaScript code for him, but I just found a small problem I don't know if it's something in the code or what the person who originally wrote the script cannot understand it either and suggested that I have post here.

  The middle area (located on the 2nd page of the pdf page two) seems to work exclusively with precision if at least one of the points of the fields on the 2nd page, 9, 10 (and 11) are engaged with the data. No values entered on the first page and only the first page, are for some reason any dividing by a more than expected. For example, if I fill the boxes 1, 2 and 3, it divides the total by four. If I filled just box 7, it halves. If I fill all 8 boxes on the 1st page, it divides by nine. It is corrected as soon as I get the points in one or more of the three boxes on the 2nd page points, suddenly the overall average is accurate. But if boxes 9, 10 and 11 contain no points, then the average is still inaccurate because the number of ' divide by "he uses is one more than what it should. I can't understand how to attach the form to this post, so I downloaded on Dropbox: Dropbox - used Evaluation.pdf.

  Under the direction of State: javascript came work to exclude the empty boxes when the points are entered in one of the three points of fields on the 2nd page (and more), but the average function is not accurate because it adds 1 to the number of ' divide by "in the calculation of the average If the points are only entered into the fields on the 1st page.

  Here's the code I entered in the 'Custom calculation Script' box in the 'Calculate' tab of the Properties menu of Test field:

  Initialize variables

  var num = 0;

  var sum = 0;

  Browse the input fields

  for (var i = 1; i < 12; i ++) {}

  var f = getField ("points." + i);

  If {(f.valueAsString)

  increment the counter to non-empty field

  NUM ++;

  Add the value of the running total field

  sum += + f.value;

  }

  }

  Calculate the average

  If {(num)

  Event.Value = sum / num;

  } else {}

  All fields are empty, then the empty value

  Event.Value = "";

  }

  I do not see that. Add the code of script debugging will display the results that each field is completed:

  Initialize variables
  var num = 0;
  var sum = 0;

  Browse the input fields
  for (var i = 1; i)< 12;="" i++)="">
  var f = getField ("points." + i);
  If {(f.valueAsString)
  increment the counter to non-empty field
  NUM ++;
  Add the value of the running total field
  sum += + f.value;
  }
  }
  Debug - display results as the form is filled;
  Console.Show
  Console.println (sum + "/" + num + "=" + sum/num);
  end of debugging;
  Calculate the average
  If {(num)
  Event.Value = sum / num;
  } else {}
  All fields are empty, then the empty value
  Event.Value = "";
  }

• Live View works only on the PHP page

  All of my web pages are .php

  I can't Live View to work. He returned to Design each time I chose Live. Viewing live does not work on php Web pages?

  (using the latest version of DW)

  PHP pages work fine in Live view in Dreamweaver CC 20141. Make sure you have a test server set up correctly in your site definition.

  Editing PHP pages in Live View mode is not very successful. It isn't really a problem with Dreamweaver because PHP is a language side server. Therefore, the server must parse the page again whenever you make a change, but save the file until the server can process it again. However, editing CSS to PHP pages works extremely well, as long as you use an external style sheet. The server doesn't have to treat the page again because CSS is just plain text.