Products of disk cleanup does not not to remove older restore points

Similar Questions

• What are the three steps necessary to correct disk cleanup does not not on Windows Vista?

  What are the three steps necessary to correct disk cleanup does not not on Vista OS

  This tutorial to see how id disk cleanup. See if it helps.

  http://www.Vistax64.com/tutorials/76073-disk-cleanup.html

• disk cleanup does not start 'Microsoft has encountered an error.

  I am running Win XP Pro SP3.  I tried to do a disk cleanup.  I tried to go through system tools and also start, run the cleanmgr.  Neither one would go.  I get the standard Microsoft window that says an error has occurred and I would like to send a report.  I tried running malware analysis and restart also. Any ideas?

  I'm sorry, that I couldn't find useful on this topic.  For the most part, the suggestion is either give up and download/install Ccleaner or to extract a new copy of cleanmgr.exe.  The latter usually does not have contributed.

  CCleaner is a good utility, but if you go this route, do not use record cleaning option.

  The current version of cleanmgr.exe, which should be located in C:\Windows\system32, is 6.00.2900.5512 that there should be a copy of the same version of the file in C:\Windows\ServicePackFiles\i386.  On my XP Pro system, I have an earlier version 6.0.2900.2180, C:\Windows\$NTServicePackUninstal$ and I have 'the original' in compressed form in C:\i386 (this is the version 6.0.2600.0).

  I saw a suggestion of semi-utile troubleshooting in the latest post (LasseA123) here: http://forums.techguy.org/windows-vista/789412-disccleanup-will-not-run-2.html note, however, that the problem discussed in this thread was in Vista, and that the two keys under this says LasseA123 caused his problem are not present in XP.  If you follow the suggestion here and actually isolate the problem to one or two subkeys, include this information in the post that I am proposing in the next paragraph.

  My only suggestion is to start a new thread, either here, most likely in the Forum of Technet XP3: http://social.technet.microsoft.com/Forums/en-us/itproxpsp/threads with the subject 'Event 1000 Cleanmgr ID' and focus on the disciplines that you pasted here.  If you try to replace the current copy of the cleanmgr.exe with one or more of the files in the location I mentioned above but still have the problem, include this information in your message as well.

• Disk cleanup does not confirm "I'm done".

  Hello

  When I run Disk Cleanup it guides me through the usual screens, but then when I get started doing 'clean up' I get no additional screens, notifications, popups, etc.  Yet, when I go in manually to check, figures show that he has released a lot of space, etc.  Why is there no notification saying "Cleanup Complete" or similar, as with most other scanning procedures, downloads, etc. etc. ???

  Disk cleanup has silent modes of execution. Each cleaner is a separate program. Dialog boxes would hinder operation.

• Hard Drive C full disk cleanup does not

  My hard drive C has been fine for a long time.  Then all of a sudden in a period of about a year he started fill by itself.  I would deal with the problem with the disk cleaning and remove programs and files is no longer needed, but every time I did that it would end up a bit more than before (it would mean 40%, then fill up to 65%, then disk clean he would stay to 45% full).

  Now, I have 110 MB of space on a 30 GB C drive, and I've done everything I can.  I ran thousands of times drive cleanup, I have eliminated all the programs that I don't use, and I transferred all my music and movies on my D drive (which is fine).
  I ran several scans, but there seems to be no worm.  I can't do system restore because I did a restore a year ago.
  Is there something I can do, or is editing and re - install Vista my only option?

  Hello

  To add to the view of Mick.

  Look with in the settings of your programs to change to the D drive. You can also copy existing data to D:, just copy it and make sure everything is OK before you delete it on C: and make a backup.

  How to change the default behavior for Windows save as or open location
  http://www.Raymond.CC/blog/archives/2008/02/29/how-to-change-Windows-default-save-as-or-open-location/

  Change my the the Documents folder default location path in XP and Vista
  http://www.mydigitallife.info/2007/11/25/change-my-documents-folder-default-location-path-in-XP-and-Vista/comment-page-1/

  Move or change Vista Documents, pictures, music, videos, games and other personal folders location
  http://www.mydigitallife.info/2007/11/25/move-or-change-Vista-documents-pictures-music-videos-games-and-other-personal-folders-location/

  You can also delete the D: partition and enlarge your C: driver. (Save anything from D: first)
  Then you can continue to use the machine you are now. (Are backups and restore points on D:)
  If so they will have to be changed if you delete D: entirely.)

  How to remove and extend a Partition with Vista disk management
  http://www.Vistax64.com/tutorials/95418-disk-management-delete-extend.html

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• disk cleanup does not add any free space on a local disk C

  Windows 7 has been reinstalled and nothing seems to just I have 750 GB hard disk, but it shows only 698. I use disk cleanup, but free space is never added to a local drive C before windows 7 has been reinstalled I would delete system restore points and free space is always added to C Local dell drive replaced the hard drive and the motherboard. is there a way to check why no free space has been added and why I only show 698 GB when I have 750 I jump someone has an answer

  There are things which never appear even though you have set to see hidden and system folders.  There is a free program called Treesize that you can download from http://www.download.com which will show you everything on your hard drive.  One thing about the 750 GB 698 vs.  People judge 1000 K, but windows account in binary, which means that a K is 1024.  So when count you in decimal, you will get the 750 000 000, but in binary, it's less.

  Good luck.

• Disk utility does not see an external drive on my network

  I'm trying to reformat the external drive that I use for backup on Time Machine, but disk utility does not see it. She appears in the Finder as a shared drive. I use OS x 10.11.6. Thank you.

  Disk utility is not supposed to see the network drives.

  If it's a USB, connect it to your computer.

  If it's an Ethernet or wireless, using a utility specifically designed for this.

  (145027)

• Disk cache does not

  I use the add-on for the status of the Cache and noticed last week that the disk cache half of it shows 'not yet loaded. At first I thought that the problem was with the add-on, I even uninstalled and re-installed, but still got the same message. Then I realize that the error was because the disk cache is not active somehow.

  The upgrade to 11.0 FF last week, I made no changes to my configuration or installed any new Add-ons in weeks. I have a few additional modules related to the cache that I installed because I noticed this problem, in fact to diagnose this problem. All in their own way reiterates that the disk cache does not work.

  The page about: cache? device = disk is completely blank in my browser. The purpose: cache page only displays the information of the cache and hide offline (i.e. 0, since I have it is off).

  I added a "Cache" folder in my profile, and he has not made a difference.

  No, I did not order my disk cache folder to a different location on my hard drive.

  No, I'm not in navigation mode private unless there is a way to get in without my knowledge. With the menu editor I removed options incognito in my menus for a long time, since I never use it. He has also not checked in Options - Advanced - Privacy.

  Yes, I have checked all the cache-related on: configuration settings. Everything is as it should be activated and assigned to a certain size of the disk cache.

  How can I get this working again? It's a bit missing folder manually add to my profile, and if so, what is the path?

  This behavior is a feature, not a bug. When the "clear history of firefox closing" setting is selected, the option to clear the cache too, the disk cache is completely disabled. See https://bugzilla.mozilla.org/show_bug.cgi?id=709262 for more information.

  It took me a while to understand this one.

• Im trying to load the update of Mac OS x Server combined software and it says that my disk volume does not meet the requirements of the software

  Im trying to load the update of Mac OS x combined Server software on my Mac Pro Tower 10.7.5 worm and it says that my disk volume does not meet the requirements of the software? Has anyone ever come across this problem?

  You are running a Mac OS X Server software? If so, which version?

• Dfrg.inf is missing that is no doubt why Disk Defragmenter does not work. How can I recover it?

  How can I recover dfrg.inf?  It is absent and is probably the reason Disk Defragmenter does not work.

  An alternative Defragmenter that I use is defraggler is a free download at www.piriform.com/defraggler/download/standard

• Logical disk management does not recognize a slave drive

  I installed an internal HD as a slave. The BIOS sees the drive, Western Digital Lifeguard sees the drive (it checks OK) with the appropriate drive letter, PMagic sees the drive before starting, but the logical disk manager does not recognize the drive or the drive letter.

  Using Windows XP, SP3 with latest updates

  Hello

  1. The hard drive is recognized in another computer?

  If this isn't the case, then the problem could be the hard drive itself. If he is found, then the problem is in your computer. In this case, run the diskpart.exe utility.

  Use the list partition command and see if the partition is detected. If so, then I suggest you to format the drive in diskpart.

  However, take a return of all data on the hard drive before the format by plugging it into another computer. Help with backup data, see

  Backup: what, how, where

  http://www.Microsoft.com/protect/data/backup/about.aspx

  To use the Diskpart.exe utility, follow these steps:

  1. type diskpartand press ENTER to open the diskpart tool.

  2. type list diskand press ENTER. A list of available hard disks.

  3. type select disk =[n]

  n s Specifies the number of disc the disc to receive the focus.

  4. type list partition

  This command displays the partitions listed in the table to partition on the current drive.
  5. type select partition =[d]

  This command selects the specified partition and gives it the focus.

   d s Specifies the drive letter or mount point path of the partition to receive the focus.

  6. type format drive: / FS: NTFS/Quick

  For more information about commands, see

  A Description of the Diskpart command-line utility

  http://support.Microsoft.com/kb/300415

  Now you should be able to see the slave drive in Solution Explorer.

• I removed my C drive files/programs to free up space, but disk defragmentation. does not show that I removed as much as I did. What now?

  I deleted my hard C drive files/programs to free up space, but disk defragmentation. does not show that I removed as much as I did.  What now?  THX.

  you could try to run own Manager;

  Click Start > run > cleanmgr.exe

  you could try deleting your temporary internet files.

  Close the browser, open internet options control panel and look for the option to detele the temporary files.

  either by the way, how big is the hard drive?

• Hi, I just realized my disk drive does not work, can anyone help

  Hi, I just realized my disk drive does not work, I never use watch cd or dvd, now I am installing a norton internet security 2012 after that I put in the cd, there is no response, anyone, please

  Hello

  First, try the automated Microsoft fixit at the link below.

  Windows 7

  Vista

  Check if the drive works now.

  If the drive still does not work, open all programs, open accessories, right-click on command prompt and select "run as Administrator".  In at the prompt, type the following command and press ENTER.

  sfc/scannow                (Note that there is a space between sfc and /)

  Let the entire process, then the output type and press ENTER.

  Then, click on the Start Menu, open Control Panel and click Device Manager.  Click to open the CD/DVD-ROM drives.  Right-click on the drive and choose uninstall.  Do not delete if requested drivers.  When the device has been uninstalled click the icon 'Search for hardware changes' (usually just below help in the toolbar).  Let windows reinstall the disc and see if it works now.

  Kind regards

  DP - K

• Disk Defragmenter does not work.

  My Disk Defragmenter does not work... He asserts that he is defraging but the hour glass just stay there.  I tried to solve by disabling the Scheduler, but I am unable to take the green check mark in the box that tells me that this scheduler is enabled... Help, please

  Hello

  in vista, the defragmentation process works silently in the background

  you do not have to run it manually

  Unfortunately in vista it does not provide a GUI to show progress as it did in xp

  to do this, you'll need 3rd party defrag programs

  read the comments on these FREE below defragmentation programs and choose the one that you prefer to use

  http://www.SnapFiles.com/get/adiskdefrag.html

  Auslogics Disk Defrag is a disk defragmentation tool that supports FAT 16, FAT 32, and NTFS volumes. It defragments supply with demand automatic defrags when your system is idle and advanced options to customize the files that will be défragmentées.

  http://www.SnapFiles.com/get/UltraDefrag.html

  UltraDefrag is an Open Source disk defragmentation tool that offers a quick Defrag, using a pilot based on the kernel. It offers a simple with a cluster map display graphical user interface, as well as command line interface and scheduling option

  http://www.SnapFiles.com/get/puranfree.html

  Puran Defrag is a Disk Defragmenter easy to use which offers start defragmentation, automatic defragmentation, intelligent directory optimization, background (low priority) operation and optimization of free space. Other features include integrated planning, automatic reboot or shutdown after defragmentation and integration with Windows Explorer to defragment individual files from the context menu. The free version is identical in functionality to the standard version (shareware), but it is limited to a private, non commercial use

  http://www.SnapFiles.com/get/iobitsmartdefrag.html

  Smart Defrag is a Disk Defragmenter automatically keeps your hard disk space does not become too defragemented, which may cause slower disk performance. It works continuously in the background while your computer is idle and requires no further user for basic maintenance intervention. The program also includes an option of manual defragmentation as well as support for the regular defrags and with optional file system optimization.

• CHKDSK freezes and Disk Defragmenter does not start

  CHKDSK would not normally start as it says that the hard disk was used?  Asked if I wanted chkdsk to run when you restart the computer.  Selected Yes.  Restarted.  CHKDSK has begun.  A frozen one hour in the audit process and would not move for hours.  Disk Defragmenter does not start also.

  Looks like you need run the diagnostics by the hard drive manufacturer, or
  the diagnostics that came with your computer and see what's happening with
  This hard drive.

  wrote in message
  News: * e-mail address is removed from the privacy... *

  CHKDSK would not normally start as it says that the hard disk was used?
  Asked if I wanted chkdsk to run when you restart the computer. Selected
  Yes. Restarted. CHKDSK has begun. A frozen one hour in the audit
  treat and would not move for hours. Disk Defragmenter does not start also.