Factory for printer settings

Similar Questions

• Changing the default settings for printing in Office Picture Manager

  Anyone know how to change the default setting for printing in Office Picture Manager?

  I have a user who clams that when they try photo printing settings in Office Picture Manager has been configured to print bac2 and paper 4 x 6.  Now when it prints, it must use the drop-down list boxes to tell it to print from bac2 and paper 4 x 6.
  I changed the default settings of the printer to print from the bac2 and use paper 4 x 6, but they must still use the drop-down list boxes in Picture Manager.
  Thank you!

  Although I maded the changes to the properties of the Windows printer I had to do that to solve the problem.

  To solve the problem:

  1. once in the print of the image window there is a link 'Options '.... "at the bottom right.

  2. once it's a click a print settings window that opens there. You will need to click on the link 'printer properties '.

  3. now the printer Document Properties window appears. Change of Source paper and media here.

  4. click on the OK button and now it's good to go.

• HP deskjet 4515: changing the settings for print quality

  Hi all

  How can I set the print quality of my printer on my macbook to project quality and black color only

  Welcome to the community of HP, @ahmadzamzam 

  Here is an article for you to see which should help you to change the settings for print quality on your Mac. Please be aware of the ads on the article page and not click on them (or just close them).

  MacLife: How to optimize your print settings

  Good luck

• OfficeJet Pro 8600: Advanced Document settings don't show option for printing without margins

  Hi people,

  I am trying to print a document created in Microsoft Word 2013 (Windows 8).

  I am also able to create a .pdf file for printing from Adobe Reader XI but have the same problem.

  The paper is 8.5 "x 11" (but in the landscape) and contains texts and photos.

  I want to print on HP Professional Laser Premium presentation paper (8.5 "x 11", glossy).

  I want to duplex print on both sides of the paper.

  I want to print without margins.

  I have a printer HP Officejet Pro 8600, which has the function of borderless in duplex printing (according to

  However, when I go to the 'Advanced Document Settings', I don't see the menu option for "borderless printing.

  I have the size set on "Letter" paper and paper type is set to "HP Brochure paper 180g glossy paper".

  The manual says that this printer supports 'Edge to edge letter' to the duplexer.

  My printer driver is not correct?

  I would be grateful for any help.

  Thank you

  -Dan

  Used the class Windows 8, download the full driver or HP basic driver.

  

• It is possible to specify settings for printing web pages?

  It is possible to specify the print settings for web pages designed by Muse? For example, you can exclude printing background images?

  Hello

  You can set the parameter page printer by setting the CSS Style in the page header by typing the tag Style.

  You can go to Page > Page Properties > metadata > HTML for.

  You can see the link below for more details on the print in CSS properties.

  http://www.smashingmagazine.com/2011/11/24/how-to-set-up-a-print-style-sheet/

  Concerning

  Vivek

• Best settings for print-to-pdf for news

  Hello, can anyone recommend settings appropriate to use for printing in pdf format of newspaper clippings from a web browser? I archive items of information in PDF format sites, which I then use later for the two reading on PCs and laptops and print devices. Specifically, what standard pdf is better to use in this case? I plead mainly because the text in PDF files that I have done so far is much less smooth and hard to read I thought it would be when viewing on pc even with acrobat 10 smoothing turned on. It makes the right edge of letters seem to be cut off. Mind you, I am interested in the pdf to 86% (adjustment of the height); When I zoom to 100%, the text becomes smooth. And PDF files also seem very clear on my portable devices. My screen is 1920 x 1080.

  See you soon

  If it's a graphic, then a higher resolution would be useful. You should be able to tell if it's a chart zoomed out and checking the pixels. If you capture fonts, then they should look the same at any zoom. You can, of course, that the fonts are included. As a check on some of the questions, try the press or print settings to see if things improve. The other option is to go back and change the settings for a custom, but good form to start with one that look reasonable first - or at least compare some of the settings files. There are other problems of print resolution (the default 1200 dpi value is usually much more you need).

• Please guide me through correct settings for printing from lightroom 4?

  Im working from Mac OS X Yosemite and my new printer is Canon MG7520.  I can't take a picture to look good for the life of me please help with a step by step instructions?  Thank you very much!!!

  Amateur photographer.   color management need help on how to turn off lightroom or printer to handle the color.  I read a ton of web content, but still having problems.

  On this printer, I don't think there's any icc profile, let the printer manage color.

  Don't forget when you view your photos on the screen to your monitor up to 25% of brightness for editing photos esp for printing

  In addition, it is easier to match the printer brand and the brand of printer paper

• print settings?

  5.6.1 pages there somewhere inside the print settings app? I want to print a page of 13 x 19. Right side contains text. On the left side has a picture. When I go to print I get the text on the left and on the right. Ideas, thoughts, suggestions?

  Menu > file > Page Setup > paper size: manage custom (right bottom) sizes

  Pages 5.6.1 has however no Pages face however if you can not control the pages left or right. For this purpose, Pages ' 09 if you have.

  Peter

• How to change the default print settings

  My settings print continues to change 50% print size.  How to set the default value to 100%?

  Hello Bill,

  Thank you for using communities of Apple Support.

  It seems that what you want to do is to save your settings as a preset favorite. Not exactly define value by default, but easier than manually make changes every time you print. Take a look at this article to find out how that is done.

  OS X El Capitan: save your print settings to use later

• Photosmart HP 7520: hp 7520 print settings

  I was extremely satisfied with the quality of 7520 far color printing.  I now have extremely poor results, faded blurry photos.  I had lost my print settings and since I'm not technical decided to try to change the settings.  I have tried both letting the printer manage colors and Photoshop CS6 (x 64), but nothing works.  I have no idea how to proceed.  I hope that someone can help you.  I tried a lot of research online, but do not come up a solution.  I have attached a copy of the settings that I used recently to better explain my situation.

  Thanks for looking and hope you can help.

  Kind regards... Ralph

  

  Hey ramirez.

  @rb011 is away until Monday, but I can certainly help you down there.

  If you don't see any color when you print the test pages this document describes How to fix the missing colors. The document is similar to the rb011 document, but it can't hurt to check that the document and measurements that were not in the original document.

  If you are unable to print in color after following the above, cartridges or printer must be replaced. You can contact the HP Support by clicking here and filling out the form below to see what options are available.
  
  Please let me know the results after following the above. If you are able to print or send to a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Define the print settings defaiult on Photosmart C309 using Mac

  When I installed the Photosmart C309 software on my Mac, I noticed that the HP Solution Center does not appear.  I used to use a pc, so I was familiar with the Solution Center.  I tried to reinstall the software, but still no Solution Center.  It seems that without it, I have no way to set the default print settings.  Does anyone have a solution (pun intended!) for this?

  OK, thanks for that.  default 10.8 work this way - for all applications which you print, your Mac, remembers the mode in which it last impression.  There is no universal default, for example.

  Try it and see if it behaves in this way.

• MacBook Pro: set double-sided printing by default for printing HP 8600 over Word

  Can I set duplex printing default for Word on my MacBook Pro documents. ? I undertand how to set type for a docukment of words individual, but want to set as the default value for all the word - and all the documents. I can do this on my PC.

  Hello

  You can set as default on Mac as well, however that works very different from Windows.

  First define the printing parameters for printing Double sided, then click the Presets menu and select 'Save the current settings as a preset' advance, completing the print job.

  By default, a used preset will remain until another preset will be used.

  Shlomi

• HP 88620 all-in-One: printer settings HP 8620

  Hello

  My Hp8620 works perfectly until yesterday.

  When you print a document (.pdf, .doc, .xls, even from firefox), for example, the default print settings are automatically set to horizontal and the paper format is 'other' for when I feel that it displays on the part of the text.

  I have re-installed, but this did not solve the problem.  I can of course put manully and set the settings to use the ones from last time, but this isn't the goal and the printer should work for everyone in the House.

  Would be great if anyone could offer any help with this problem.

  BR
  Dominik

  Hey @rallydriv3r,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with your Mac OS x 10.10 machine printing to your Officejet 8620 e-all-in-one printer. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

  1. If your printer is connected to your Mac via a USB cable, remove it.
  2. Close any programs you have open.
  3. Click on your Apple icon, system preferences and printers and Scanners.
  4. Hold down the CTRL key and click the icon of your printer on the left.
  5. Click on reset printing system.

  Now, if you removed the USB cable, plug it. Otherwise:

  1. Click the 'more' in the lower left corner.
  2. Select your printer from the list.
  3. Click on the box to use and select your printer from the list.
  4. Click on Add.

  Please let me know the results after following the above. If you can print successfully, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• OfficeJet Pro 8500 a Premium: How can I preset the trays used for printing and copying?

  I love this machine except for one thing. It takes the paper for printing from the lower drawer. So I used the top plate for single supply of envelopes. Then I'm going to copy something and it makes me put the paper in the upper tray, when the lower plate is full!

  How can I determine if just use paper in the lower tray for copying too?

  Hello

  You should change the copy settings to use the 2nd tray, then you can set it as default:

  1. Click the copy on the front panel of the printer.
  2. Click settings.
  3. Click Select status bar , and then select tray 2.

  You can set the default tray by selecting set as new defaults in the settings menu even.

  Shlomi

• Print settings Pro - 10 - you can print edge to edge on paper Fine Art?

  I have a printer Canon Pro-10. We know that in the printer settings if you set the Type of media to a fine arts paper then the driver applies a margin of 30mm printing. So if you try to print from Lightroom, but have margins of 10 mm, it refuses to print until you change something.

  Now I can get around this by setting the media type on a photo paper so I could print the edge on a paper fine art.

  My question is;

  I can set the paper size in the Page Setup dialog box, I color managed by Lightroom and I actually use the right ICC profile for the paper and printing, this media Type setting does nothing with regard to printing? I printed some impressions on canvas and I see no difference in print quality?

  Control color ICC profile. Media type controls how the ink is expected. It has been my experience that as long as you select a similar surface types everything comes out fine.