Cascading of wireless routers. How?

Similar Questions

• How to connect and configure two wireless routers to provide the same connections across large areas?

  I have a big long House and prefer to use two wireless routers EA4500 to remote points to offer the same connections from one end to the other.

  How to make this wise (?) configuration

  @jcousie

  You can cascade two of them. Follow the steps on this link.

  Ann_18678
  Linksys technical support

• Help cascading two Linksys routers

  Hi, I tried to cascade two Linksys routers, but it did not work for me. Maybe you could help us. The first (which has the connection of the cable modem) is the brand new E4200, and the second is the former WRT54GCv3.

  That's how I want cascading them:

  ···································································
  Linksys E4200 ----(wireless)----(Desktop PC)·······················
  gw: 192.168.1.1 ·············|--(Laptop)···························
  ······|······················|--(iPad)·····························
  ······~······················|--(Home Server)······················
  ····(PLC)··························································
  ······~····························································
  ······|····························································
  Linksys WRT54GCv3 ·················································
  (Router mode|DHCP/NAT disabled) --(wireless)----(Playstation 3)····
  gw: 192.168.1.2 ·····························|--(Samsung BD-C8500)·
  ···································································
  

  However, the WRT54GCv3 does not receive the IP address of the DHCP E4200. I also tried to connect directly (without the PLC), even specifying a static IP address on the router second, but I got the same results.

  I have to State, that I will not change the gateway IP/first router because I have a web server and game works with a static IP address and I don't want to put it temporarily offline due to adjust the network settings.

  Thanks for your support!

  I searched the forum for you and found your answer.

  Go here for cascade two routers.

• Addition of wireless routers in series with the existing network

  I have a client who wants to add at least 3 Wireless throughout their existing network routers. The problem is that these routers must be in the same subnet as the existing network. Oh, we use routers Linksys WRT610N. By default, routers set up a new subnet with a DHCP assigned IP of the primary subnet. I was able to change the static WAN IP, but I do not know how to configure the rest. The point of this is that if a user connected via the ethernet cable or wireless signal, they should be able to access the same network resources. I chatted with support, but they are not allowed to help what it isn't is not a "standard" configuration Anyone can shed some light on this subject? I've done this before with another customer, but its been a few years and it's a different router.

  Thank you!

  You don't want a router. You want a wireless access point. You have wireless routers that you do not use as routers, but only as access points. A router by definition routes traffic between several subnets connected to the various interfaces (LAN and WAN). This kind of configuration is not what the WRT is built for and that's why support said you that it is not a standard configuration for a WRT.

  You can use a WRT as simple access point.

  Reconfigure the router via its web interface. Connect a computer to the router first.

  1. set the LAN IP address on a free IP address in the existing network.
  2. make sure NOT to set a static IP address on the type of internet connection.
  3. on the main configuration page turn off the DHCP server.
  4. now save the settings. You will lose the connection.
  5. unplug the computer and one of the numbered LAN ports of wire to your existing network.

  Now you can access the web interface of the WRT to the new LAN IP address. All wired to the other 3 LAN ports and everything wirelessly connected has access to the network directly.

• I have a MN700 router for my wireless. How to reset the password?

  I have a MN700 router for my wireless. How to reset the password?

  I contacted Microsoft via the phone, but because they no longer carry this point they couldn't help me.

  Hello

  1. what operating system is installed on your computer?
  2 did you change your computer, after which the issue started?

  Here is the manual for the device...

  http://download.Microsoft.com/download/b/6/9/b69c956c-85d9-4641-aa6f-1548391e0967/mn700_base_station_configuration_guide.PDF

  Reset the router and set it up as if it was the first time. Then, you can simply choose a new password and security settings.

• I just got a new supplier of cable installed at home and now we find that our usual printer print wireless. How can I add this to the new network?

  I just had a new supplier of cable installed at home and now we recognize that our habit of printing wireless printer, how can I add this to the new network?

  Hello

  • What is the brand and model of the printer?
  • What happens when you try to print?
  • You receive an error message?

  You can view these methods:

  Method 1:

  Disable the firewall and check.

  The Windows Firewall is enabled by default in this version of Windows. To make sure that it has not been disabled, follow these steps:

  1. open the Windows Firewall by clicking the Start button, then Control Panel. In the search box, type firewall and then click onWindows Firewall.

  2. in the left pane, click turn Windows Firewall on or off. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. below for each type of network location, click on disable Windows Firewall, and then clickOK. We recommend that you turn on the firewall for all network location types.

  For more information, visit the following link:

  http://Windows.Microsoft.com/en-us/Windows7/Understanding-Windows-Firewall-settings

  Note: Run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.

  Method 2:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  See also:

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer-on-a-home-network

• Salvation; I instaled a new Windows XP Home edition on my computer hp laptop, but it's not conect to the internet through my wireless card.how can solve this?

  Salvation; I instaled a new Windows XP Home edition on my computer hp laptop, but it's not conect to the internet through my wireless card.how can solve this?

  Did you use the recovery process HP plant or install using a different operating system disk? If the latter, you need to install the drivers for all your hardware, including drivers for wireless network cards. You will get only the pilot specific support for your laptop model HP Web site tech.

  If by "wireless card" you mean that you have a 3G USB modem through your cell phone provider, contact the cell phone provider for help with that. MS - MVP - Elephant Boy computers - don't panic!

• Micro Innovations KB982W 104Key wireless keyboard, how can I connect it?

  Micro Innovations KB982W 104Key wireless keyboard, how can I connect it?

  Hello

  You can read the article and check.

  Connect to Bluetooth and other wireless or network devices

  http://Windows.Microsoft.com/is-is/Windows7/connect-to-Bluetooth-and-other-wireless-or-network-devices

  See also:

  Add a Bluetooth device or other wireless or network device: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-or-other-wireless-or-network-device-frequently-asked-questions

• is it possible to connect 2 computers 2 different 1 modem wireless routers

  is it possible to connect 2 computers 2 different 1 modem wireless routers?

  Why do you have 2 routers?

  Depends on the design of the modem. It probably only supports a connection. So, you'll probably end up making a wired connection between modem and "1 router" and if you really need a second wireless router, install a wired connection between the 2 routers.

• Cisco still sells router-AP (wireless routers) for domestic use

  Well, do not really know where to ask
  But what is described

  Cisco router-point of access is great and fearsome performance for a domestic use, but cisco is still for sale? If so, can someone give me a link to the list of products?
  Think so just to clarify, I'm not talking about Linksys wireless routers :)

  If you are looking for equipment of the company, so it's Cisco, but since they let go the Linksys line, it is not any kind of home router AP. Cisco has an SME but that may not be what you want too.

  http://www.Cisco.com/Cisco/Web/solutions/Small_Business/products/wireles...

  Scott

• where is the list of adaptable wireless routers

  where is the list of adaptable wireless routers

  This kind of list?

  http://www.FutureShop.ca/en-CA/category/wireless-routers/19994.aspx

  All new wireless router works with Windows 7...

• Satellite L10: I want to install a wireless connection - how?

  I have a satellite L10... and I want to install a wireless connection on the help on the config free pages it is said that the alternative "quick connect" appears after the installation of the projector toshiba wireless... it is what? and is anyone knows how I can do this without getting more confused?

  Hello

  It's Toshiba projector Wireless:
  http://www.ProjectorCentral.com/Wi-fi_toshiba_tlp-T501.htm
  As you can see it's not a fast connection wireless card or something like that.

  First of all, it would be very interesting to know the name of your unit, because I know if your laptop has a wireless card or if it of possible to update the device with the Mini-PCI Wireless card.

  If your laptop has a wireless card so you need activate the wireless antenna. The switch on the side of the unit, you should find. In addition, choose the wifi with the FN + F8 key combination.
  Well, now you have an AccesPoint in your neighborhood. If there isn't one available then you should see it. Go to network connections. Here, you must select the list of wireless network in network and refresh.

  But if you have a wireless card so you need to upgrade your laptop with the minPCI card, or the wireless USB stick or a PCMCIA wireless card

  Best regards

• all .exe files have been changed to .lnk installing wireless keyboard, how can I recover

  We installed a wireless to a laptop keyboard... now all the files .exe on the computer have .lnk extensions. How can I fix it?

  Hi Audrey,.
  Follow the steps described in this guide: http://www.selectrealsecurity.com/fix-programs
  If you have any questions about the instructions, just ask. Let me know if this helps you.
  Brian

• Suggestion for setting up a good secured router including wireless routers

  I've owned three routers LinkSys Wireless since May 2007: two WRT54G (V6 and V8) and my current V1 E3000.  All provided configuration options that can do if it is very difficult, if not impossible, for unauthorized access to my WiFi routers.

  All changes must then your system is connected to one of the router's Ethernet ports and not through WiFi due to the modification point #3 of "General Suggestions.

  All the elements in square brackets by "<>" are the titles of LinkSys Admin web pages or sections of web pages.  Don't forget to click "Save Settings" on a single web page before you go to another web page or your changes will be lost.

  Please note that not all pages of the LinkSys Router Web Admin can use the titles of Section-page/website such as used in this suggestion.

  Make sure you know MAC address and physics of your wireless adapter so that it will be necessary for the point #3 «Proposals WiFi»  Assuming that you have a Microsoft Windows-based system, use a 'Command Prompt' to issue command ' ipconfig/all' to determine the MAC address (aka physical) of your adapter WiFi wireless connected to a router.

  After all the suggested changes, repeat the process to ensure that the changes have been saved.

  GENERALS.

  (1) < administration/mgmt=""> change the Admin password to one of your choice.

  (2) access to disable HTTP and HTTPS allow access.  After that it changed was recorded, you must reconnect to the router via note https://192.168.1.1 URL using httpS or http (without S) for a secure connection to the router admin web pages.

  (3) in Wireless disable access to the Admin web pages.  Must use the Ethernet port on the router.

  (4) in disable remote management AND disable UPnP - UPnP (a well-known Protocol should can route diversion if enabled).

  Specific suggestions of WiFi.

  (1) in turn off the SSID broadcast.  This will prevent the intruders 'driveby' to see the SSID of LinkSys Router.  Make sure that change you the default SSID of your choice.

  (2) in set your security level to the WPA or WPA2 (preferred WPA2).  Do NOT use WEP because it's encryption algorithm can be cracked in less than 5 seconds.  This will protect your transmissions between your system and the router.  The E series routers are supported both WPA/WPA2 depending on the client configuration.  My WRT54G routers would support only WPA or WPA2.

  (3.) in Select AES, TKIP not as security consultants have recently discovered a flaw in TKIP encryption crackable.

  4.) Select a passphrase that you and systems all allowed must be used to secure your router connections.

  (5) in the enable filtering MAC and "Allow only PC" whose MAC addresses are defined in the .  Both of these changes will require that you register addresses MAC and physical of all wireless clients that allow you to connect to your network router.  Failure to record the physical address/MAC system will refuse this system to access your network, even if they have the correct passphrase AES and SSID.

  1. disable the SSID broadcast is useless. Any Drivede will detect always immediately the access point because it should send signals of tag.

  It is trivial to force a wireless client to reveal the SSID. Thus, any hacker will be able to learn the SSID almost immediately after it has detected the presence of your router.

  In addition, to disable the SSID broadcast causes known problems of connection/reconnection with several wireless devices.

  In addition, broadcast disable SSID drains the batteries in your wireless devices as they have to actively seek a connection to your SSID to know whether here or now.

  As long as your wireless device is not connected to a wireless network, it will be continues to try to connect to your SSID at regular intervals. For example, if you have your iPhone set up to connect to your home network and you pull out your iPhone permanently tries to connect to your SSID, transmitting the requests of the association on a regular basis, actually bloating on your "hidden SSID' to anyone.

  As transmitting something takes a lot more power then passively scanning and tuned radio waves, it drains the battery. If you need good battery life with your ever wireless devices connect them to a network with SSID broadcast disabled, or make sure that the device does not automatically connect to it!

  Never disable the SSID broadcast, especially not for security reasons, because they do not offer any added safety or an advantage.

  2. the MAC address filtering does nothing more. MAC addresses are always in the unencrypted part of wireless packet. Any attacker will immediately learn the MAC addresses of your wireless devices. It is absolutely useless in the means of security and cause problems as the best for you. Do not bother about the filtering of MAC addresses. It does not prevent attacks on your network as it is easily circumvented.

  Use WPA2 with AES and a password strong. That's all that is necessary to protect your wireless network.

  The rest is a joke for any aggressor and bothers you much more than the alleged assailant. If an attacker was able to decipher your network WPA2/AES the SSID of your network and MAC addresses are a free byproduct you will get during the cracking process...

• Replacement of the batteries in the wireless mouse, how

  I need to replace the batteries in my wireless mouse, model H2F44AA.  The upper part of the two AA batteries are visible, but I am unable to remove them.  Any ideas?   Thank you.

  In the following video, the examiner shows how to open the mouse and replace the batteries. Nails are required to do.