Factory unlocked iphone 6s gives error sim not supported

Similar Questions

• How can I fix error 'SIM not supported "?

  I have AT & T and have an iPhone 6. A couple of days, I bought a refurbished AT & T iPhone 6 s. I put the SIM card in the iPhone again and it says "SIM not supported." So I called AT & T and he scored, but it still doesn't work. I'm going to AT & T to try to get a SIM different but thought I would post here first since it's a few hours before they open and thought that maybe there was another way to fix it. They are both 'locked' phones, but I think that it would not matter since they are both locked to AT & T

  What is you get the exact error message?

  Are you sure it's an iPhone AT & T?

  The ism unsupported error appears usually when you try to use a sim card which is not by the carrier, that the iPhone is locked.

• iPhone is sim not supported

  Hello

  My girlfriend and I bought one to the iPhone in the United States a few weeks ago. We live in the Netherlands, so we asked for the correct model (A1723) and a sim phone so it should work on our carriers. We did not have a simcard nano of our carriers at the time so they have unlocked the phone with a card of sprint (without contract). Now, we're back in the Netherlands and we have tried our new SIM card and we get the "Sim not supported" error. It's almost as if the phone isn't sim for free. We called apple support in the United States and we talked for over an hour, and he could not understand the problem. According to him, the phone has been unlocked.

  We also called our subsidiary of KPN (simyo) carrier and they said everything was ok on their end, the problem is with apple. If we are really stuck here and I don't know what the problem is. Can someone me the phone is unlocked, because I'm still not convinced. And in this case, what should I do because the lady who helped us said it was free sim...

  Thanks in advance.

  Ruud

  Where did you buy this phone. It seems that if activation with the Sprint card has caused your question. But knowing where you bought it.

• Can you turn off the shutter sound on the factory unlocked iPhone to the Japan 7?

  Can you turn off the shutter sound on the factory unlocked iPhone to the Japan 7?

  I am going to Japan November 2016 and plan to buy unlocked (no sim) iphone to use in my country (Thailand) 7.

  However, I have read some post on 'mode of politeness' in Japanese phone but the conclusion is not clear whether you can disable shutter sound (without sim) unlocked iphone 7 or not. Then, someone could share on the current situation?

  Thank you

  No, its required by Japanese law shutter. Even if the iPhone is

  is no longer in Japan, you will not be able to turn off the shutter sound.

  You should also check with the seller to be sure you can get the

  iPhone unlocked from the Japanese wireless provider to use with your

  carrier in Thailand. And check that the iPhone is unlocked before leaving the

  retailer.

• Can a factory unlocked iphone Aliexpress 5s can be updated to 9.3.3 ios?

  Can a factory unlocked iphone Aliexpress 5s can be updated to 9.3.3 ios?

  A way of knowing.

  Tap Settings > general > software update

  Latest available iOS version is 9.3.4.

• SIM NOT SUPPORTED

  Dear Sir.

  Last week, I restored AND updated to LATEST iOS IN my iPhone 5 c through iTunes. Subsequently, I get the error message 'sim not supported. " Now, I could not use my iPhone. Phone IMEI is *. Please advise what I need to do?

  Thank you and best regards,

  Mostapha N,.

  Mob *.

  < personal information under the direction of the host >

  Your iPhone has been hacked to be used with other sim cards?

  Seems as if a jailbreak or other similar hack was in place to allow other carriers sim cards to work on it. When it has been updated the hack or jailbreak is removed.

  Your only option is to know what carrier its coastline and see if you qualify for them to unlock properly.

  Also please do not post your IMEI number in a public forum.

• Hi, I bought a the United States iphone6, im now in South Africa and it will not work. It says sim not supported.how do I fix this?

  Hi, I bought a the United States iphone6, im now in South Africa and it will not work. It says sim not supported.how do I fix this?

  The SIM card is not support indicates that the iPhone is locked to the American carrier that it has been activated with. In order to obtain the released lock it is necessary that you talk to the carrier to find out what their requirements are to release the lock. They are the only ones who unlock it so that it can be used with another carrier.

• Factory unlocked iPhone 6 works only with T-Mobile sorta

  I bought my iPhone 6 from Apple directly and I'm trying to sell it. I used three subsidiaries of different att and never had a problem. I have recently put up for sale and had someone with tmobile who wanted to buy it. I put the sim in the phone did a quick flash of logo Apple then asked me to the initial setting. Before, I even pressed no button Choose wifi or cell for the installation, he showed with LTE service. I then chose wifi and it says please wait while allowing or something similar. After that, it says SIMcard not supported, blah blah, a bunch of other things on sim not taken in charge. While demonstrating that he was getting service perfectly. So I took her sim and tried in my other iPhone 6 Plus factory unlocked to and he did exactly the same thing.

  Someone has an idea of what's going on?

  Faulty SIM card?

• Factory Unlocked iPhone.

  Can I buy an unlocked iPhone from Apple.com factory?

  Yes.

• Format of paper detected error is not supported on 3210 all-in-One Printer

  Msg of error about the size of the paper when opening lid to print a paper copy, an office document that is on 81/2 x 11.  Error says 'paper size is not supported has detected", gushes out a blank page and cancels.  I went to default settings on a Word document that is located on my desktop and the page is set up correctly to print.  Don't know where else to see if the default values have been dirtied with.  Help, please.

  All, I went to Google again to continue my search for an answer.  Found the following of "Red Sonja":

  When I saw that so many other people on other forums of media also received this error message, I thought that it would be a solution posted by someone before too long. Assume that nobody could understand it!

  The problem has continued and became extremely irritating I went and spent a few hours on the support site of HPs and finally understood what to do, although I never found the exact error that we all received.

  Basically the fix is change the paper size setting in the Menu auto copy letter. This by pressing the copy, then #6, select letter (which is #2), and which will bring you to the Menu copy. Scroll through all the selections from 10 until you go to the bottom that is set by default again and select this option.

  I tried to make several copies, and it has worked every time now... no error message in view! However, if you try to make copies on paper other than the standard 8.5 x 11, you can select that with each individual work because by default no longer detection "auto."

  Thank you Red Sonja, whoever you are!

  RNA

• WMP 11 will not play my dvd downloads digital message error c00d2906 not support level of mandatory protection to decompress the digital file

  Original title: wmp 11 will not play my dvd digital downloads

  iGet an error message c00d2906 is not supported level of protection required to decompress digital file is there a fix for this problem

  Hi alfredDAVILA,

  ·         What is the format of the file?

  Follow the steps in the article.

  You receive a codec error message or play audio but video does not play when you play media files in Windows Media Player 11

  http://support.Microsoft.com/kb/926373

  For reference:

  Codecs: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions (Applicable to windows XP)

  Windows Media Player 11 cannot read content protected by DRM on Windows Vista

  http://support.Microsoft.com/kb/935336 (Applicable to windows XP)

  http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=11.0.5721.5268&ID=C00D11B1&ContextId=66&OriginalID=C00D2906

• U2412M, error DDM, not supported

  Hello

  I use windows 7 on a desktop computer. my graphics card is Nvidia quadro FX580 (the 9.18.13.4195 driver version)
  

  I can see the display in Device Manager, it is not identified as Dell U2412M (Display port)
  

  Manager display of Dell (1.27.1792) is not identify the monitor. I get a balloon message, saying he needs a Dell monitor supported. Old version of the DDM was not working either.
  

  The screen is connected via the HDMI port on the graphics card. I tried the DVI connection as well, but same result.
  

  Only one monitor is connected to the computer. DDC/CI, on the screen is activated.
  

  I am using resolution is 1920 by 1200 @ 60 Hz
  

  
  Thank you
  

  Ariel
  

   

  Unfortunately, the U2412M is not supported by the DDM (Dell display Manager). It was an error in the web on page drivers U2412M. DDM requires a monitor Dell model year 2013 or newer. Note that there is no user Guide of a DDM on the U2412M page:

  

• Update ESXi3.5U3 to ESXi4 by vSphere update Utility error: host not supported - unhandled setting in startup disk page

  When I try to upgrade my ESXi3.5 Server (which is Xeon E5310 on ASUS DSBV/SAS box with 5 SATA drive on the SAS controller unRAID) to ESXi4

  I got error: unsupported Host - not support layout of startup disk

  What can I do now? Is this bug or just, do not boot from the local disk support?

  Since the fdisk-l to output provided, its clear that the 2nd partition is missing. The 2nd parition in ESXi Installable is the partition scratch (FAT16 file system), which is by default to 4 GB. During the upgrade the parition is resized to scrape (about 150 MB of space is used 4 GB) to extend the bootbanks of 49 MB to 256 MB.

  I don't know the exact reason why the partition scratch missing here since it is generally created during the default installation. One possibility could be that there was a parition scratch already available on a secondary drive during installation and setup it has not created on the primary drive.

  A standard partition for ESXi 3.5 with partition table scratch would look something like the following...

  Disk/dev/disk / vmhba1:0:0:0: 8589 MB, 8589934592 bytes

  Heads of 64, 32 sectors/track, 8192 bottles

  Units = cylinders of 2048 * 512 = 1048576 bytes

  Device boot start end blocks Id system

  / dev/discs / 5 750 763904 5 Extended vmhba1:0:0:1

  / dev/discs / 751 4845 4193280 6 FAT16 vmhba1:0:0:2 < -.

• Official charger Apple Watch gives collateral charge not supported message

  I have 2 Chargers for Apple Watch.  The one that came with the watch and the 2nd I ordered directly from Apple.  In the last 2 weeks, two chargers are showing a message that recharge with this accessory is not supported by Apple Watch intermittently.  I had the watch since the launch last year.  I ordered the 2nd official magazine a few months after the initial purchase, so I could always keep one with me.  I tried different outlets.  I restarted the clock. I never went swimming or taking a shower with the watch.  I put the watch on the charger all night because it needs.  It is a little disconcerting to have invested so much in a watch, additional bands and an extra charger and the experience, given that I bought only from Apple directly.   I would like to have additional suggestions.  Thanks and forgive me if I look a little frustrated.

  * Update * the question with him do not recognize a charger from tonight is now constant.  I am unable to update the watch OS to the latest version, 2.2, because he did not think that it is connected to a charger.

• Bit Trip Beat game error: input not supported

  Original title: input not supported

  What came was a floating message saying "input not supported", then so about 2 hours ago I double clicked on the game "Bit Trip Beat." so I thought well ill just alt tab and change the resolution and others, but I could not alt tab... I could hear my msn flashes... I could hear trip beat bit sounds in the game, everything except the screen worked...

  so I restarted my comp in safe mode with network connections so I could google a few answers but nothing helped me to this day...
  things I've tried are, restart in safe mode, and then change the resolution to something, I know that it can handle (did not work)... by clicking on "last known good configuration" (did not work)... ive tried rebooting with command prompt and typing a few commands that I found from google that is supposed to restore the resolution that doesn't work anymore , I also chose another option in windows boot manager "enable video low resolution (640 x 480), which also did not work."
  Ive kept googling and nothing seems to work, I'm running a windows OS vista and I'm not sure of my monitor acer... model someone at - he a clue whats up?
  What, in my view, that has happened, is that the game Bit Trip Beat made the default resolution of my something computers it can not handle... that is what happened?... because when I started, I had to force shutdown my computer and restart from there. any help would be appreciated

  Hello

   
  I suggest you to try Method 2 from the previous post and adjust graphics hardware acceleration. If it does not resolve the problem, then try to uninstall the graphics drivers and reinstall it.
  Let us know if it helps.